Release strategy for no determination

Hi guys,
I have a release strategy for PR that is determined based on the cost center, regarding the account assign. ctg. and the cost center. The problem is: when the release strategy is not determined - most of the times, it happens on the creation of a new cost center - the PR is born already released. I need to figure out a way to direct this situation to a strategy that nobody can approve.
Thanks in advance.
Regards,
Marcelo Buosi.

Hi,
Ok. Check the below process & May helpful to you.
Now Create purchasing Group for a departments ( Say example as E01 for Environment ) in OME4 t.code
Create a Cost center for the department where cost going to capture ( Say in Environment Department) and assign department to cost center in basis data TAB of cost center in KS01/KS02 t.code.
Note:
Create Characteristics in CT04 t.code {Table ECBAN & field name for department responsible }
Create Class in CL02 t.code and assign Characteristics with other characteristics
Create Release Groups, Release Codes, Release Indicator for PR and finally Release strategies u2026u2026u2026..in Classification view for each releases strategy keep the department responsible and other values.
Regards,
Biju K

Similar Messages

Release strategy for quantity contract

Hi Gurus,
In quantity contract .. target value will not filled by the value(in header details) as it is quantityt contract.
We may have different line items with different cost..
my doubt is how the release strategy will be triggered for the quanityt contract and how the system will consider the whole value of the contract..
please explain/clarify
regards
subbu

Hi,
The release strategy for the contract will work in the exact mechanism as for the PO i.e. it will be determined based upon the total net value of the entire purchasing document.
Cheers,
HT

Release strategy for Return PO

Hi,
Can we create Release strategy for Return PO's. ?
Regards
Sunil

Hi,
The process for return PO is:
Process:
- Create a return PO
- Create a outbound delivery
- Goods issue
Release Strategy can be created for All Document Types as Document Types being one of the determining factors for Release strategies. So under Classification data Characteristics which we maintain determine the release strategies for a Particular Purchasing documents. Actually it depends on your Business case that for what all documents you want to have a release strategy config.
regards,
Prashant Rathore.

Release strategy for Future validity period- (Outline agreements)

Dear All,
I want to create release strategy for Scheduling agreement.But I am creating the SA for furure validity period.In this case how the release strategy will triger.
E.g Today 09.03.09 I create a Sceduling agreement and the validity period I maintain is from 01.06.09 to 31.12.09 and Amount say 100 Rs.
I am using Characteristics Doct type and Amount.. The system checks the rate as on date (i.e on 09.03.09) and since it doesnt find any value the Release strategy is not trigeering.
How to set up release strategy in the above case.
Thanks in Advance.
Regards
Amar

Hi Amar,
1) if you maintain a target value (EKKO-KTWRT) in the header of the
contract this value is the basis for the determination of the release
strategy. If the target value is 0, the system will cumulate the
values of the items and will use this value for the determination.
2) So if the target value is 0 and you change the price of a condition
with a validity period in the future the system will react in the
following way:
Example:
   the contract contains one item with quantity = 100 and a net price
of EUR 5,-.
   all contracts with a target value from EUR 0 - 1.000,- should be
subject of a release strategy
   the contract is created and released on October the 1st
   ME32K -> October the 2nd you define a new price of EUR 7,- with a
validity period from 03.10.09 - 30-10.09 -> you save the contract
-> the release strategy is not reset, as the start date is not
reached yet (system date < startdate of validity period)
   ME32K October the 3rd you change a field in the contract -> the
release strategy is reset
This is system design that a release strategy can only be reset through
an action by the user. The determination of the release strategy can't
be triggered automatically in the background.
If you create a document which is subject of an overall release strategy
(e.g. p.o., contract) the determination of the release strategy takes
place when the user hits the 'save' button or chooses the 'check'
function.
So there must be a kind of event that tells the system that something
has changed.
Regards,
Edit

Release Strategy for PO not kicking in

Hello SAP Experts,
I have gone through all the steps of configuring release strategy for PO. I checked at the end with the transaction code OMGSCK and everything is good with no error. But when I test the strategy by creating a PO, the 'Release Strategy' tab does not come on in the PO Header. This means that the Release Strategy did not work. I have troubleshot over and over again right from the Characteristics/Class, all the way to the Release Strategy, but no breakthrough.
I will appreciate and award points for helpful hints.
Thank you in advance.
Joel.

Please list all your char you have created and the value of char.
Than please tell the PO details.
once i got this info than only i can see the problems.
you can do one more thing
goto CL30n and enter the class and class type 032
than hit enter and enter the value of char which you have used in the PO and then hit find initial class button from top menu
see if any release strategy is pulled or not?
if it is determine morethan one that means you have same value exist in more than one release strategy

Release strategy for PREQs created from PM work order

Hi All,
I have an issue with determining release strategy for purchase requisition for external services created via PM work order (iw31 transaction).
We have activated release strategy for Purchase requisition based on the following characteristics:
CEBAN_PLANT
CEBAN_COST_CENTER_GROUP
CEBAN_MANUAL
Characteristic CEBAN_COST_CENTER_GROUP is defined via user exit based on the cost center used in the PREQ and a z table which contains all cost centers mapped to the corresponding cost center goups.
In the user exit we have consider to cases:
The first one is when a purchase requisition is created with account assignment K (cost center) then system is checking the z table and determines the right cost center group.
The second case is when a purchase requisition is created with account assignment F (internal order) then based on the order type and number the cost center in the order is defined and based on it the corresponding entry in the z table cost center group is assigned.
The third case is when purchase requisition for services is created automatically from PM work order. In this case the PREQ is again with account assignment F, but at the time when user exit is checking the input parameters the real number of the work order does not exist and system can not defined the other parameters.
We have defined for this requisitions in the release strategy for characteristic CEBAN_MANUAL creation indicator " F".
Has anybody of you defined release strategy for PREQs created out of work order before. How did you manage to trigger the release strategy?
Best Regards,
Desislava

Hi,
For PM order find the costcenter in the settlement rule of the order or else find the costcenter in the Location tab of the order.
Consider this filed from order & write in the Z program to pick up the costcenter from there to find out the cost center group.
Regards,
Raj

PR Release Strategy for Account assignment cat "U"

Is it possible to set up release strategy for Acct assignment Cat "U" - if yes, How would it be configured? additionally we are also setting up Rel str for acct assign cat K and A - specific question is relative to "U" in addition to K and A.
Other parameters being used are
pur Org
Doc type
cost center
Total value
Thanks for the help in advance
Raj

Dear Raj,
When you creating PR with acct assignment U, the acct. assignment tab will not appear, thus
you not able to enter cost center. You may try this workaround via customizing.
a) You may define a <BLANK> value for the cost center in customizing and assign it to your release strategy.
Characteristic:
Cost Center:
Value    Desc:
1000     1000
2000      2000
                <BLANK>
b) You may use user exit EXIT_SAPLEBND_001 and pass the dummy cost center to get the release strategy
determine.
Regards,
ian Wong Loke Foong

What is the use of Release Strategy for Sales Document

Hi,
Can i know what is the use of Release Strategy for Sales Document? Difference between lowest level and Highest level.

Hi,
Can i know what is the use of Release Strategy for Sales Document? Difference between lowest level and Highest level.
Lowest Status No: Sale Document can have several statuses at the same time. However, only one of the statuses may have a status number. If another status with a status number is activated; the old status with status number is deactivated. This is only valid under certain conditions. The system makes a note of the status with the highest status number that has been reached up to the present. The "lowest number" of this status number determines which status number a new status must have.
Highest Status No: Sales Document can have several statuses at the same time. However, only one of the statuses may have a status number. If another status with a status number is activated, the old status with a status number is deactivated, provided the new status number does not exceed the 'highest number' defined for the old status number
If you want more clarity try to check below link
http://www.sapfunctional.com/SD/ReleaseStrategy/Index.htm
Regards,
Prasanna

Release strategy for PO and Contract

Hi,
I maintain characteritic for PO
Plant
Doc Type
Net Order Value
Purchasing Group
I maintain characteristic for contract
Company code
Target Value
Doc Type
Purchasing group
My class consist of
Plant
Doc Type
Net Order Value
Purchasing Group
Company code
Target value
Q1: Do i need to maintain ALL characteristic value when i define my release strategy for PO or Contract as some characteristic only apply to PO only or contract only?
Q2: What option do i have if i need to maintain all characteristic value ? leave it blank ? empty
Currently my PO release is working fine but when i try to maintain the contract release inside the class . my PO release is not triggering . I maintained diffrent release group for both PO and Contract .
Thank for your advice

First of all
For purchasing like PO,pr,contract you can able to get in ekko table.No need to maintain separate release unless if it your business requirement.Take Document type as one of the characteristics it will distinguish whether it is PO or contract.
You have to maintain all the characteristic value then only it will trigered release.
Check the release indicator as well.
Hope it will help.

Release Strategy for SA/Contract/PO

Hi friends,
Should we have different release groups and release codes in contracting/ SA/ PO.
Because...
I have maintained 4 characteristics in release strategy for PO _[ Comp Co, plant, porg, total net order value].
But i want to maintan only 2 characteristics in release strategy for contract [plant, total net order value]
because the same is reflecting in contract config also.
Is it possible..please help me frnds.
Prabhu

Hi Prabhu,
Unfortunately you need to maintain characteristics of all possible values for company code and plant for contractsu2019 to subject the release.
Wish that SAP would be more flexible with release of PO, Contract and RFQ but it does not.
Regards

Release Strategy for Contract is not getting picked whereas it is ok for PO

Dear Experts,
I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
Kindly resolve the issue.
Satish

S0004830404 wrote:
Dear Experts,
>
> I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
> I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
>
> Kindly resolve the issue.
>
> Satish
hi,
use create other characteristic for value CEKKO-GNETW in this use the mk , wk values in value field and assign this characteristic to your class and save.
Thanking you

Release strategy for Schedule lines in SD

Hello All
Can we create a release strategy for Schedule Lines in Scheduling Agreement? If Yes How?
I have already maintained a release strategy for Item Level... which I want to put it for Schedule line as well....
Thanks in advance.

Hello,
I think you are in the wrong forum. Please choose the right forum category and post it there.
Matthias

Release strategy for Scheduling Agreement(SA)

Dear Forum,
This issue is with regards to the release strategy for Scheduling Agreement(SA)
Until now release has only been applicable to contracts at our client site. But we now plan to introduce it for SA as well. Such a feature is available in SAP but the problem is that with the given release strategy GR is not allowed until the release is affected. The system allows you to post the delivery schedule.
Now what I want is that after making the SA the system should not allow to make delivery schedule if release is not affected.
We also have MRP run at client site..Kindly suggest the procedure as, how to configure it.Are der any User Exit for the same,if so please discuss..
Warm Regards
Nainesh
SAP ECC 6.0

Hi,
What's the SA Type that was created via MRP.
If it's LP (without release document), release will not do anything BUT
If it's LPA (release document), then you will not be able to Post the GR until release is affected.
Thanks.
Scheduling Agreement can be categories as
1) LP (without release document) and
2) LPA (with release document)
If use LP, you can do GR without release but with LPA, you need to release the schedule line via ME38.
Thanks.
NanoSAP
Posts: 58
Registered: 1/5/09
Forum Points: 6
   Re: release strategy for Scheduling Agreement(SA)
Posted: Jun 26, 2009 8:32 AM    in response to: sathish.kumar           Reply
Dear Mr.Satish,
Thanks a lot for your earliest reply...But my point is i want the system should not allow to make delivery schedule if release is not affected...Though schedule lines are generating through MRP run...Is is possible,by any chance...??

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

Purchase Order not subject to release strategy for contract rel. strategy

Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
So I have checked this release strategy with this codes:
CL24N ok,
CT04 ok,
CL30N ok,
CL20N ok,
Release simulation in release strategy works,
Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
Thank you for your help in advance.

I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
Also compare your release strategy settings with many existing documents in SCN.
Check your Classification should be like that.
You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract.

Release strategy for no determination

Similar Messages

Maybe you are looking for