Release strategy for Purchase order

Hi Friends,
My client was using Release strategy for purchase order. Now we want to know the T-code for showing list of Rejected Purchase orders, T-code for for showing list of approved purchase orders, T-code for showing list of blocked purchase order.
Thanks and regards
Krishna

HI,
You can go to SE16N view table name EKKO
FRGKE Release ind. = B
FRGZU Release status = <blank>
mean, this PO yet to approve/ rejected.
FRGKE Release ind. = R
FRGZU Release status = X
means, this PO has been approved.
Hope this helps

Similar Messages

Release strategy of Purchase order

Dear all,
   I configured Release strategy for purchase order in which i create characteristic,Class.
   I also define release procedure for PO like release group,release code,release indicator & release strategy.
   But it is not reflecting in Purchase order.
Regards,
Nitin Patil.

Hi Nitin,.
check had you missed any step while creating the release procedure...
Follow the link it may be useful to you, this is for PR.... this is same for PO also onle differnce is in coummunicaitton structure CEKKO you neet put...
http://www.sap123.com/showthread.php?t=59&highlight=SettingsimpleReleaseProcedurePurchase+Requisitions
regards
anand

Release Strategy in Purchase Order

Hi,
Can any explain the usage of Release Strategy in Purchase Order.
ganesh

Hi Ganesh,
Release strategy works the same way in purchasing documents (i.e. PR and PO). It is a form of control that company use to control the purchases made.
In your scenario, a PO release strategy is used to control the PO release status for Good Receipt process. Once the PR is released by the relevant releaser, you will see that the PR is now unblocked for issuance of PO.
Once the PO is issued with reference to the PR, it is now blocked again by a release strategy for user to perform Goods Issue. The releaser will evaluate the PO issued and determine if it is necessary to be released for GR / Service Acceptance process. At this stage, the releaser can still reject the PO although issued, and hence GR / Service Acceptance is not able to be performed. Different value will trigger different set of release strategy with different level of approvals, depending on how the PO release strategy is configured by the MM functional consultant. Usually, the PO release strategy has a flatter approving level as compared to PR release strategy, reason being that once the PR has been fully released by all releaser and the PO issued, usually the purchase is deemed necessary and PO releaser would usually consider to release the PO for GR or Service Acceptance process, unless there is discrepancy or sudden change in decision of Management.
Hence, all in all, the PO release strategy act as another form of control to the company to restrict the release of PO for GR or Service Acceptance.
Hope this will give u a better understanding on the function of a PO release strategy.
Rgds.

Wrong Release strategy in purchase order

Hi,
I have a specific purchase order with wrong release strategy.
I had been creating others documents with the same total value and the release strategy work correctly.
The release strategy configuration are right.
How I can correct the release strategy in a specific document?
Thanks.
Best Regards.

Hi,
The release strtegy is basically conssitss of Different type of characters.
What characters you are highlighting plays in release strategy.
First you comapre the characters you mentioned in two purchase orders,
eg: p.org, Pur Grp, Value,------
o to bith release strategies and compre the things or characters you mentioned Release strategy and found wher you missed to get the required Strategy.
SPRO>>MM>>Purchase order>>Release Procedure for Purchase Orders>>Define Release Procedure for Purchase Orders>>Click on release strategies
Select your release strategy and go to Classification , here you chck the parameters in both release strategies and compare with your purchase orders.
Regards,
Andra.

Release Procudure for Purchase Order

Hi Experts,
I am new Release Procudure.My client wants release procedure for two users.
End user wants create Purchase Order then other user wants release that purchase order and then another user wants final release. Please tell how can map this process in sap.
Thanks in advance,
Chandhu
Edited by: chnadu9 on Jan 5, 2011 5:48 AM

Hi,
The release code is a two character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
An example of configuring a Purchase Order Release Strategy
If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
Steps for configuring the PO release strategy
Create the PO Characteristic
Transaction code : CT04 - Create Characteristic e.g. NETVALUE
Click Additional data tabstrips
Table name CEKKO Field name GNETW and press enter and you will see this information message :-
Format data taken from Data Dictionary (press enter)
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data tabsritps (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >=10000 (equal or greater than 10000) and press enter
Save your data
Create the Class of the PO Release Strategy
Transaction code : CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create button
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tabstrips, type NETVALUE to assign your characteristics to the class
Save your data and this message will appear :-
Class type 032: Class REL_PUR created
Define the Release Procedure
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Save your entries.
Release codes - New entries
Grp Code
02 01
Save your entries.
Release indicators - New entries
Release indicators Release Description
0 Blocked
1 X Release
Save your entries
Release Strategy - New entries
Release group 02
Rel.strategy 01 - Release
Release codes 01
Release status 0 - Blocked
1 - Release
Click the Release prerequisities button
Click the Relase statuses button the click the Continue button
Click the Classification button
Choose your check values
Click the Back button
Save your entries
Check your PO release configuration
Finally, check your PO Release Strategy configuration to make sure that there are no errors.
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Mohar

T.Code for Release Procedure for Purchase Order Type

Hi Frd
im working in ECC 6.0.
OMGS is t.code for Release Procedure for Purchase Order Type in SAP 4.6.
Can anyone tell me what is the t.code for Release Procedure for Purchase Order Type in ECC 6.0 .the OMGS t.code is not working in ECC.
Thanks
By
Pari

Hi Rajasekharan,
Go to tcode ME22 and enter the Purchase order number.
inside the Display screen,u can see a GREEN flag button on the Application Toolbar.
Click on a item and press the Green Button.
U will see the release code,provided the Purchase order is set to release strategy,after that Go to tocde ME28 enter the release code ,along with Document number and then release the Purchase order.
Actually the tcode for releasing purchase order is ME28
Reward points if useful.
Cheers,
Swamy Kunche

Define Release Procedure for Purchase Orders

Hi Friends,
We are changing Release procedure for purchase orders for one department from > $ 5000 to > $ 10000.
We defined three characteristics for the class namely Purchasing Order Document, Purchasing Order Type and Ner Order Value which is Currency data type. I Defined Release Procedure for Purchase Orders in configuration master. It's working fine, I mean the Net order Value field is updated in Configuration Client.
After transporting the above change to the Testing Client, the Net Order Value field did not update in testing Client even though I created Characteristics in Testing Client (as characters are not transportable, I created them seperately in Testing Client). I can't update the Net Order Value manually in Testing Client as it says "Client 010 (test) has status 'not modifiable' "
Please tell me how to update that field, as the net order value didn't change even after transport. I can't change manually in testing Client as the status is "not modifiable"

Hi,
Yes I have already done that.
In SPRO,
After hitting the following:-
MM --> Purchasing --> Purchase Order --> Release Procedure for Purchase Orders --> Define Release procedre for Purchase Orders
I have to process the objects in the following sequence,
Release Group, Release Code, Release Indicator, Release Strategy & Workflow.
Upto Release Indicator it is fine. After hitting Release Strategy, I should select the release strategy (which I just created) and display. Then 4 buttons will be displayed namely,
Release Prerequisites, Release statuses, Classification, Release simulation.
Upto Release statuses it's fine. Afeter hitting Classification,
the values of Purchase document & Order type are populated, but the Total Net Order Value is Blank. It is supposed to populate the amount & 10,000. But it is not.
Actually that amount will be stored in the field GNETW of table CEKKO. But CEKKO is a Structure not a table. So I can't update the field.
Please advice me...
Thank You,
Nag

Redetermine release strategy for purchasing requisitions

Hi Guys,
How can I redetermine the release strategy for purchasing requisions when changes on the costcenter (EBKN-KOSTL) are done -
I know that it will be redermined when I add the costcenter as charateristics in customizing for release strategy but thats not an option
I also tried to add coding in userexit for changing the communication strategy (Include ZXM06U13) but this exit doesn't provide information of the document number and position (EBAN, EBKN ..) so I can't find out if changes have been made
I spend several hours trying to find solutions for this issue but no working results so far ..
I hope you can help me on that
TIA
Manuel

Hi,
Note that EBKN will have entries corresponding to a PR only when it is
saved or checked, so KOSTL will not have any values for a PR which is under
creation. You should always use fields from structure CEBAN while
creating characteristics for Requisition release procedure as it
contains most of the relevant data about a PR under creation/change.
I would advice you to check the note 365604.
Please also check the changeability indicator in the customizing:
transaction OLME -> Purchase Requisitions -> Release Procedure -> Procedure with Classification -> Set Up Procedure with Classification -> Release indicator -> check the detail screen for settings.
Please check additionally the possible values for your characteristic cost centre (transaction CT04).
Regards,
Edit

Is it possible to have release strategy for sales order?

Is it possible to have release strategy for sales order?

hi
as per SAP standard there can not be any release strategy for sales order but if u want to control u can use authorization profile for this purpose.
povide authoriztion to the required persons only..
regards
CMM

Release procedure for Purchase orders

Hello SAP Gurus,
Can anyone explain in steps the release procedure for purchase orders and also can any one explain how it differs from Puchase requisition release procedure.
Thanks
NDS

Hi
Release procedure for Purchase orders here is process flow.
Go to spro>img>materials management>purchassing>Release procedure for Purchase orders
1. Create characterstics -Intially you will create characterstics based on which you would like to release a purchase order.
Charactrestics are like plant, purchase order value,purchase group etc.. Assign characterstics to release class 032.
2. Create Release group say 01 and create release codes like pm(project manager), gm(general manager) etcc..
3. Create a Release starategy say s1 and assign release group to it 01 and release class 032 and department to whom this release stategy applies say MM. define the order of release say first pm followed by gm etc..
4. under classfication define value limits for release of purchase order.
5. define release indicators
6. simulate the release
7. assign if there is any workflow.
hope it helps.

Release Strategy for Sales Order-IMP

Hi Gurus,
I want to know regarding Release Strategy for sales orders. I want to know the detailed step-wise procedure for SO and not for PO. My understanding is that standard SAP does not support Release Strategy for SO in SD Module. Please l want the following queries to be answered
1) Is my understanding on Release Strategy for SO correct as mentioned above?
2) What are the other alternatives and the steps of configuration step-wise.?
Kindly help me post this information as it is required urgently. Suitable full Reward Points will be given to all answers.
Many Thanks,
Pankaj Mishra
E-Mail : [email protected]

Pankaj,
There is no release strategy for sales order.
You can try it doing Authorisation /Status profile with your BASIS person...
REWARD IF U FINDS THIS AS USEFUL...
Regds
MM

Steps for deleting release stretagy for Purchase Order

Hi,
Could you please help in deleting / cancelling the exisiting PO release stretagy? I need to create new release stretagy which is totally different from the existing one.
What are the steps in cancelling existing release strategy.
Can the same steps be used for cancelling release stretagy for Purchase Requistion?
Thanks.
Anand

Hi,
you goto
spro> mm>purchasing> purchase order> release procedure
there you go to to release strategy
then follow following steps.
1.delete release strategy
2.delete release codes
3.delete release groups
then to create new release strategy and follow following steps
1 create characteristics ( use table cekko)
2 create class( class type 032)
3 . create release group and assign class to it.
4 create release codes
5 then create release strategy using release group and release code.
hope this will solve your problem
Regards,
Vijay

Two release stratergies for Purchase Order

Hello Experts
Our organization have 2 different company codes. My question is whether I can configured 2 different release stratergies for different company code for same object Purchase Order?
Thanks
Ankit

Hi,
You can only use (assign) one class for your client level , but what you can surely do is that based on release group you can differentiate and trigger separate release strategy
For example
Release Group .....Class...............description
..........C1............... zclass_po ......C.code1 release
..........C2............... zclass_po ......C.code2 release
Now based on this group you can differentiate and trigger separate release strategy (As both release code and release strategy is defined at release group level )
Edited by: redriver on Feb 18, 2012 8:01 AM

Release stratedires for Purchase Order

Hi
Dear All
I need a clarification that my needs cost centre based release strategy for Po, but t is not in Cekko table.i have to use customer exit M06E0004 or any other way to use cost centre as char in release st.
i appreciare if anybody can help/ give the suggestion in this regard
MVRAo

Hi,
Which Documents Can be Released (Approved)?
Release procedures can be defined for the following documents:
Purchase Requisition
The external purchasing documents purchase order (PO), contract, scheduling agreement,request for quotation (RFQ), and service entry sheet
Release Procedure for Purchase Requisitions
Two different procedures are available for requisitions:
With classification
With this procedure, requisitions can be released both at item level (i.e. item-by-item)and in total. The latter approach is also termed overall release.
 Without classification
With this procedure, requisitions can only be released at item level.
The two procedures are mutually exclusive (that is to say, you must decide in favor
of one of them only - you cannot use both).
Release Procedure for External Purchasing Documents
External purchasing documents (i.e. purchasing documents other than requisitions) are released at header level. Item-by-item release is not possible. These documents can only be released using the release procedure with classification.
Procedure Without Classification (Requisition Items Only)
The conditions can be based on one of the following item characteristics or a combination of
these:
 Account assignment category
Material group
Plant
Total value
Hope this will answer your question
Thanks
Arun agrawal.

Release strategy for purchase requization on basis of document type

Hi All
can somebody can explain me the procedure for creating releasing strategy on basis of doc type
Nabil

Hi,
The below link will help you to understand the process.
Please open the below link and u will get the complete process to have the Release stretegy on the basis of Doc. Type.
http://www.sap-img.com/materials/release-procedure-for-purchase-requisitions.htm

Release strategy for Purchase order

Similar Messages

Maybe you are looking for