Release strategy  tab not appearing in purchase order

Hi Experts,
I have customized release strategy for purchase order that is created characteristic  value & pur organization , created class ,assigned char to class , define rel grp, rel codes , rel strategy and checked everthing is showing in Green  in developent client , then i  Transported  to testing client , here I have created same char & class , assigned & also i have checked in Cl24 N
Now i when i create Purchase order& save it  in testing client , Release strategt tab is not appraring in PO
Please help me in thids regardby your valuable suggestions

Hi,
Please check carefully note 365604 on release strategies in purchasing
which includes some common problems with release strategies.
If the trx CL30N is ok,  It could be that the release strategy was not determined due
to missing code in the user exit EXIT_SAPLEBND_002 in the include
MM06EF0S_STRATEGIE_CEKKO.
In this case the code e_cekko = i_cekko should be missing  Please
include this line in your user exit and then retest your scenario.
I hope this helps you
BR
Nadia Orlandi

Similar Messages

  • PO Release TAB not trigered in Purchase Order

    Dear all,
    We have created a Release strategy in our test system.Its works fine.But when we create the same in our clients development
    system the "Release Strategy "Tab is not triggered in Purchase order.We did the following steps while creation
    1) Created new characteristics and class and when we had assigned it to new user group system gives following error
        "Please check release classes (see long text) Message no. ME492".....
    2) So we used the existing class in clients system and assigned new required values in characteristics (Plant,Purch.Org,
       Company code,total net order value,Purch.Group).
    3) In classification tab we get all the required value and no problem to release strategy.In "CHECK RELEASE STRATEGIES"
         system shows green signal for Release code and release strategy..
    Kindly suggest were we went wrong????
    Regards
    Sachin

    Hi,
    You should use only release class for PO.Hope one release class assigned to release group(TR transported to dev-client) & now you created another  release class and want to assign to release group, so you are getting the error. Now create same release class  which assigned to release group & design release strategy and you will have release TAB in PO.
    Note:Better to keep one release class always for purchasing documents....ie.......one release class for PR, one release class for PO, one release class for Contract & one release class for SES.
    Regards,
    Biju K

  • Purchase Order History not appearing for Purchase Order with service items

    A purchase order with a service item has been created.  A SES has been created and Miro transactions as well. When tcode ME2L is executed, the Purchase Order History field is blank. Any configuration missing or is there an applicable OSS note to fix  this?

    Hi,
    It is a coding error.
    Could you please check if you have applied the note 1049031 with the latest version 13?
    Regards,
    Edit

  • Condition Type Value Not appearing in Purchase Order

    Dear All,
    I have created a condition type and assigned it to a Pricing Procedure. Correct value is being captured in <b>Scheduling Agreements</b> but in <b>Purchase Orders</b> the Condition value is being captured as zero (All fields for SA and PO have same values). I have already assigned Correct Pricing Procedure to Purchasing Docs (As correct PP is being captured in SA and PO). Please Assist even if you have a slight idea.
    Regards,
    Sudhanshu

    Hi Sukdev,
    Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
    Regards,
    T.R.S.Praveen

  • PR Release Strategy tab processor field is not getting displayed

    Hi Experts,
    While creating Purchase Requisition, In the Release Strategy tab processor field is not getting displayed which should be showing the name of the user id which has been configured in the SPRO.
    SPRO--> Rel Proc for PR > Rel Group> Rel Code--> Object type (US) and --> Agent (User id who has to approve the PR).
    release strategy - Release code  -work flow 1
    That processer name is not displaying
    Thanks
    chandoo

    This is the workflow forum.

  • Purchase requisition release strategy tab missing

    Hi all
    I configured purchase requisition release strategy and ME51N is working issuing no error but it is not displaying Release Strategy Tab , please help me where i am wrong.

    hi,
    check few reasons:
    1. There might be more than 1 release strategy using the same class, due to which it is not possible for sap system to determine the unique rel. strategy..this normally happens when you copy the exsisting class and assign it to own new one...
    2. check the release strategy OMGSCK, is there any problem with your release strategy...
    3. Check whether you have maintained all the classified field in the document or not..
    4. check whether the release is assigned to any workflow...if so, then check the inbox pls...
    regards
    Priyanka.P

  • Not able to view release strategy tab in pr(change mode)

    Hi,
    i have created a pr at DEV and i am not able to view release strategy tab in change mode at DEV. please help???

    Hi,
    Please check if you activated the user exit EXIT_SAPLEBND_004
    (Include ZXM06U31) This exit is relevant for the overall release.
    If you activating the userexit, please ensure that you implement
    the coding line E_CEBAN = I_CEBAN. in the include
    . Please refer to point 3) of the attached note 365604.
    BR
    Nadia Orlandi

  • Release Strategy Processor Names under Release Strategy tab for a PReq

    Hello Experts,
    We have situation in Release Strategy for Purchase Requsitions in which we need to display all approvers names under the Release strategy tab for a Purchase Requisition.
    Senerio work as follows.
    Based on the Release strategy customization settings,Purchase Requisition subjected to release strategy selects the approver names from a custom table.
    In the Custom table we have names of the approvers with release codes.
    Purchase Requisition displaying the names of the approvers according to alphabetical order.Hence it displays First one user or approver name under the release strategy according to the approver alphabetical order from the custom table.
    Can we display name of all approvers in one line according to initial investigation there is room for 40 characters under the release strategy tab.
    Let me know if any Standarad OSS notes available for this.
    Amogh

    Hi amogh if you configure with workflow the strategy and the name of the persons are in transaction SU01, you don´t need to put nothing. The release strategy shows the names of the persons that release the document, but if you change one person in the release strategy, the system don´t save history for this, all old documents that have been released for this person, release strategy is blank. You have to do a non standard report that shows what person releases what document.
    I hope that this information help you
    Rose

  • ME29N - Release Strategy tab

    Hi people! I need help.
    When I have an Purchase Order released with 1 message green status and add 1 new message copyng from other and save, the release strategy tab dissapear...somebody can help me?
    thanks a lot!

    Please see the charecteristics in the release strategy if your have User ID or roles defined for the change. If the PO is changed by a user who is not defined as values then the problem occurs.
    Please advise how is your design of the release strategy
    Thanks

  • Release Strategy is not picking up in the PO.

    Hi All
    I have defined a Release Strategy for the Purchase Order.
    The Characteristics are
    PO category
    Pur Org
    Total Net Order Value
    All the lights are green which i check the release strategy.
    But the Release Strategy is not picking when PO is created.
    Kindly let me know what is the mistake i have dont or i need to make any corrections.
    Thanks in advance
    Renukaprasad.

    Hi Renuka,
    im using ECC6, my PO rel strategy dont have PO catergory,
    but you can try this:
    Maintained PO characteristics:
    PO doc type
    PO Plant
    PO Pur Grp
    PO total Value
    Once your PO meet this, Rel Strategy triggres.
    When you define the Rel Strategy, there is rel indicator Approved and Block, configure based on your requirement.
    Hope this helps a little
    Regards,
    Maia

  • New release strategy should not trgger for PO released with old Rel Strategy

    Hi All,
    Please suggest. Po has been fully released with Release Strtgy V1 XX. Now I m replacing release strategy  XX with ZZ. If I change any po which has old rel str XX , system will reset new release strategy as in config changeability indicator 4 maintained.
    But requirement is if there is  any change or value decreasing in fully released Pos with old strategy  it should not retrigger new release strategy. If value Increases then New strategy should retrigger.
    Please help me on this.
    regards,
    Rohit

    HI Rohit
    A reset of the release strategy only takes place if
           -  the changeability of the release indicator is set to '4' in
              case of a purchase requisition and '4' or '6' in case of
              another purchasing document (purchase order, request for
              quotation, contract, scheduling agreement),
           -  the document is still subject to the previous release
              strategy,
           -  the new TOTAL NET ORDER VALUE is higher than the old one.
    The most important thing to consider in to avoid changes to release strategy customizing once the release strategy is used.
    The commom steps are:
    1- make sure all of the old POs should have been released.
    2- don't delete/change the original release strategy. create a new release strategy with copy function, then the old release strategy will not be replaced.
    3- if you delete the original release strategy and add a new release strategy which the characteristics in classification is same as old release strategy then the PO (have been approved) will be replaced with the new release strategy.
    Kind regards,
    Lorraine

  • PO release strategy is not triggering if Quantity pre.Qty

    Standard SAP design will trigger the 'PO release strategy' if Total net order value (GNETW) is more than set. Lets take if PO created with Qty 100 and Price 50 then first time 'PO release strategy' is triggering when you save the PO. Next time when you change Qty less than the previous value like 80 from 100 then 'PO release strategy' is not triggering but if you enter more than previous value as 120 then its triggering. Ofcourse it makes sense but our user wants to trigger if any changes happened to QTY or PRICE. Is there anyway to trigger?
    Found user exit - EXIT_SAPLEBND_002 but not sure what needs to be changed. Can one let me know the solution, if you have any.

    Hi.
    According to  note 493900, question 4, release strategy is reset only
    for some specific case. Alternatively, please question 5 from this note
    release strategy might be redetermined. However in order to determine a
    new release strategy the field that is changed in PO must be included
    as one of the fields in the strategy. Thus there is no standard way
    for resetting/redermining release strategy for a change of e.g. text
    on header or item level.
    Please also kindly refer to other 2 useful notes for this area:
    662993     Resetting an already occurred release
    365604     FAQ: Release strategies in purchasing
    BR
    Nadia Orlandi

  • Shipping tab not appearing in PO

    Dear Sir,
    I hv made all the relevend configuration and vendor creation for PO but still shipping tab not appearing in po.
    I dont know wht step i hv missed out, please advise what should i do.
    Looking forward for your quick response on th same.
    Regards
    Parul

    Hi Parul
    Pls check the following settings.
    1.     Define receiving plant for sto. (Storage location also for this plant if required).
    2.     Assign receiving plant to company code.
    3.     Assign receiving plant to the supplying plants sales org, distribution channel.
    4.     Assign shipping point of supplying plant to receiving plant.
    5.     Maintain purchasing organization and assign it to receiving plant and company code.
    6.     Create receiving plant as a customer in supplying plant (normal customer creation).
    7.     Define shipping data for plants: imgu2014mm-----po-----setup sto.
                         Select receiving plant and assign customer number (previous step number)
                         Assign the sales area of supplying plant.
                         Select supplying plant assign the sales area of supplying plant
    8.     Assign delivery types and checking rules (imgu2014mm-----po-----setup sto)
    9.     Assign document types, one-step procedure, under delivery tolerance. (same above path)
    10.     Extend the material to the receiving plant.
    11.     For Second plant assign manual shipping point as of first plant (OVL2)
    Br.
    Ramana

  • Vendor evaluation tab not appearing in ML81N

    Hi,
    Vendor evaluation tab not appearing in ML81N.
    Please suggest

    Hello,
    Please maintain vendor evaluation for related purchasing organization. Afterwards, vendor evaluation tab will be appeared in ML81N.
    Thanks.
    Regards,

  • Preq release strategy tab disappears

    We are having an issue where a few odd times, we will find that a Preq is missing its Release Strategy Tab. Here is an example, and my findings so far below the image.
    Checking the Workflow, I see there was a workflow started, so I know the release strategy must have kicked in.
    I see that the workflow went to error, with the error saying "No Authorization to Release"
    However I checked the user, and they do have the correct Release Level Role.
    So I'm not sure where to check next?

    Our release strategies are just on PR value, see screens below.

Maybe you are looking for