Release Strategy Triggered even if the characteric values were not correct.

Hi,
I have configured release strategy based on characteristics
Purchasing group and
Document type
It has 2 release indicators with 3 levels of release.
There are 2 release strategies assigned to same group 01 but have different release codes namely 01,02,03,04
Release Strategy A1has
Doc type NB and Purchasing group 120
Release Strategy A2 has
Doc type ZINT and Purchasing groups 130,131,132,134,135,136,137,138,139
However a strange thing happened.The release strategy was triggered for doc type NB and Purchasing group 190.
This purchasing group is not listed in either of the 2 strategies
Can any one explain why the release strategy got triggered?

That means the old release strategy is not cleraed from the system
do one test
Go to CL30N tocde and enter you release class and class type 032
hit enter
now here enter the value of your char which is in the PO and hit Find in initial class from header
see which release strategy is pulled by the system
here you will see the release strategy and make sure that is not other than what you expect

Similar Messages

OSD fails during WinPE Install drivers - "The hash value is not correct"

Hello everyone,
We are facing a strange problem during OSD for one of the hardware models. We are on SCCM 2012 R2, and mainly build Windows 7
x86 machines on various Lenovo models.
I can see this problem I have encountered has been discussed elsewhere on this forum (especially SCCM 2007 threads) but not really sure what I have
observed is the issue being discussed. Here is the problem....<o:p></o:p>
We have a laptop (Lenovo x240) which has been building perfectly fine for as long as I can remember. However since last 2 days when I try to build
the same model, we get the above error during the driver installation stage (in WinPE).<o:p></o:p>
I referred to some of the other threads and MS blogs where they say file names with extended ASCII character may break the hash of the files (packages)
being downloaded during OSD resulting in the error(http://blogs.technet.com/b/smsandmom/archive/2008/10/09/configmgr-2007-smsts-error-hash-could-not-be-matched-for-the-downloaded-content.aspx).
The point is I have manually gone into the Command prompt (F8) during driver downloading stage (right after apply OS image) and checked that the drivers are getting downloaded fine (but there is not enough time for me to check individual sub folders for the
extended ascii character problem). When it comes to installing the drivers, the TS fails and immediately the whole of the driver packages folder under D:\_SmsTaskSequence\Packages\PackageID folder becomes empty.
There is nothing much logged in the ts log either.<o:p></o:p>
Any thoughts? The only thing that has changed in our environment in the last 2 weeks is that we have upgraded from SCCM
2012 SP1 to R2(CU3). All the other models have built ok since and only X240 is running into this issue.
Would recreating the driver pack be an option here? I also understand that we also can configure the TS to refer to the package media directly from
the DP share (instead of downloading) but we would rather not get into that at this stage as we have not tested the TS with that configuration (it might open another can of worms with package command lines etc.)
One more point - This "The hash value is not correct" error message is only logged on the SCCM status messaging system (which can be viewed
under the Monitoring wunderbar - Status Message Queries). I do not find it on the ts log file interestingly.
Any help is much appreciated.<o:p></o:p>

I've only seen this once before in a ConfigMgr 2012 RTM environment and after fighting it for a few days I ended up simply recreating the driver packages.
-Nick O.

Release Strategy to work on PO Gross value (inclusive of taxes)

Dear MM Gurus,
We have configured the PO Release strategy as under:
1) < 500000
2) > 500000
After checking the PO, we now find that the release strategy gets
triggered on the basic price only. Any additions to the amounts in the
condition tab also adds it to the Basic price and the release strategy
is properly working.
But when the user defines Tax code under Invoice tab, the Tax amount
gets added to the PO value. But in this case, the Release strategy
functionality does not work.
Requirement is that the Release strategy should work on the total PO
value (including Tax amounts). Any addition to the PO value by either
Condition amounts and/or Tax amounts should activate the Release
Strategy functionality.
Currently, it works only for the Net order value. Please let us know
how to configure for the PO Gross order value.
Thanks in advance
M

How can you include tax amount in the release strategy process. Approvers are doingthe approval/rejection through release strategy only for goods that are being purchased and it is value and tax amount is not relevant here at all.
Explain to your customer that this requirement cannot be implemented. If he still insists thatn tell him that only if they convert the tax amount into a price component, then it is possible. But then doing this means it is not tax, so basically the requirement is crazy.

PR Old Release Strategy - triggering NEW Release strategy any change OLD PR

Dear Gurus,
We have implement item level PR release strategy,
characteristic used: 1. Document type, 2. PR item Value, 3. Material Group, 4. Change date & 5. Account Assignment Category.
BEfore the above implementation, there is a OLD PR release Strategy existing in the system at one level release.
Now the issue, the OLD release Strategy status is release completed, now the user goes and change the PURCHASING GROUP in old PR, new release gets triggered. How to Stop this, system should not trigger NEW STRATEGY,
Please advice
REgards
RS

HI,
If i use date created as a characteristic, then Old release strategy get reset and the no release strategy will be trigger henceforth, the status of the PR will be INACTIVE.
ANy charateristic we use, there will be only 2 options for old released PRs, 1) It will reset the strategy to new one or 2) the old strategy will be reset and make the PR status as INACTIVE.
Is this is standard behaviour? pleae advice
Regards
RS

Release strategy: problems after changing the price

HI Experts,
I have the follwing problem.
I´ve setup the release strategy for Purchase reqs.
The strategy includes 3 approval levels.
release indicator with changeability 4 and a value of 0,1% for the first two approval levels.
I´m able to release it, but if I release the first two appoval levels and change the Preq the release strategy goes back to the first level. Fine.
But the problem is now that I´m able to release the first level but if I try to release the second one I get a error message.
I guess the problem is the changeability - but how can I solve this issue?
The system have the cancel all approvals if someone changes the price.
Any ideas?
Thanks
Alex

HI RJ,
the exact message is "Release prerequisite not fulfilled".
The system should act in the following way:
Approval levels:
1. Supervisor
2. Manager
3. General Manager
1 and 2 is approved.
Then the requisitioner changes the price.
Release will be changeled (Releases already effected will be cancelled).
OK that work, now the release process starts with level 1.
1. Approved --> OK
2- try to approve and get the message "Release prerequisite not fulfilled".
1 and 2 have the same release indicator with 4 and 0,1%.
Thanks
Alex

Checkbox error "The Entered Value is Not on the List of Valid Values".

Hi All,
I have a check box attribute inside a node which is bounded to a field of type CHAR 1. I have given the property and value for the attribute as follows:
Attribute Name     ZCHECK
Type assignment     Type
Type                          ZTABLE-ZCHECK
Read-only                         0
Default Value
Null Value                           0
Input Help Mode     Automatic
Determined Input Help     ZCHECK
Type of Input Help     Fixed values for domains
Formatting
Compression     Default Value
I have created an onToggle Event for it.
Now when i execute my component i do the following.
First i click on a button called 'EDIT'. Now the check box comes to edit mode. Now when i click on the checkbox i get the following error. "The Entered Value is Not on the List of Valid Values".
When i try to debug, there is no problem in the 'INIT' method. The error is throw even before going inside the onToggle Event for check box.
Please explain how to over come this.

Hi,
Check your field ZTABLE-ZCHECK, if it is of type CHAR1 then only possible values for checkbox should be 'X' and ' '.
May be your domain has some other values in Fixed Value List.
its better to bind checkbox with attribute of type boolean
Also, the input help for attribute bound to checkbox doesn't makes any logic.
Regards
Manas Dua
Edited by: Manas Dua on Feb 26, 2010 3:11 PM

Why the default value is not the Oracle recommended?

Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?

>
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?
The default database blocksize of 10g is 8k.
>
8 * 128 = 1024
128 >= 2
At least twice the size does not mean exactly the doubled size.
There is no contradiction between the documentation and your observation in this case.
Kind regards
Uwe
http://uhesse.wordpress.com

Data type of the base attribute or the base value does not match...

...the assigned expression.
Hello all,
I always get the Error
+<ERROR+
TEXT="'DWH.CUB_REGISTRATIONS_AW.REGISTRATIONS': XOQ-02517: Der Datentyp des Basisattributs oder der Basisgröße stimmt nicht mit dem zugeordneten Ausdruck überein.
XOQ-01400: Ungültige Metadatenobjekte"/>
The English message must be something like this:
The data type of the base attribute or the base value does not match the assigned expression.
when I run my mapping. The attribute REGISTRATIONS is NUMERIC (12,2) in the Cube and I map a NUMERIC(12,2) constant in it.
I use a simple OWB-Mapping for loading, but I don't understand why it doesn't function. Other mappings where the attributes are out of a
table I put in a cube are running well.
I tried different things, but nothing fixed my problem. Any idea ?
Thanks a lot for help
Michael

Technically this is a 'warning' from the server, not an 'error'. This means that the change you made should have been submitted, but you get an warning message on the client. AWM would suppress this warning, but evidently OWB does not. Can you switch to use AWM?
Here is the definition of the warning along with 'cause' and 'action' sections. (Unfortunately these sections are not translated into German for some reason.)
>
02517, 0, "The data type \"%(1)s\" of the base attribute or base measure is different from the mapped expression \"%(2)s\"."
// *Cause: Either the base attribute or base measure with the mapped expression was set to an inconsistent data type, or it was mapped to an expression of a different data type from its fixed data type.
// *Action: When changing a mapped expression for a base attribute or base measure, ensure that the expression has the same data type; otherwise, set the data type of the base attribute or base measure to NULL first. When a base attribute or a base measure has an existing mapped expression, do not set it to a different data type.
>
It is probably safe to ignore this warning, but if you can post the relevant XML for the cube, then will probably be able to spot the problem. I assume that REGISTRATIONS is a measure in the cube CUB_REGISTRATIONS_AW, so this is what you can look for in the XML:
(1) The definition of the base measure along with the datatype. It should be something like this
<Measure>
<BaseMeasure
    SQLDataType="NUMBER(12,2)"
    ETMeasureColumnName="REGISTRATIONS"
    Name="REGISTRATIONS">(2) The mapping info for the measure, which should looks something like this:
<MeasureMap
Name="REGISTRATIONS"
Expression="...">
<Measure Name="REGISTRATIONS"/>
</MeasureMap>I don't know if you can get the XML directly from OWB. If not, then DBMS_CUBE.EXPORT_XML should work (assuming you are in 11.2). You could also attach AWM and save the cube to an XML template.

Error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap

Hello Experts
The error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap occurs after manager’s following actions:
selected detailed Team View ;
selected hierarchy;
changed style of the hierarchy to any other (for example, the vertical);
the error occurs after attempting to do any action.
Our system is EHP7.
If someone faced with this error, please give me advice how can i resolve this problem.

Hi John,
Sorry for the delay in replying. No, we do not have the same problem if we understand you correctly.
"We have bypassed the MSS Home Page and just embedded the Detailed Team View as a standalone application in our MSS portal role" - we also made for the our customer. BUT we have error «The entered value is not on the list of valid values» in our standard system.
Regards,
Andrey

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

Even if the if condn is not satisfied, I want to move & append internal tab

Hi!
Please give me a solution to this problem.
In this, I want to move and append the contents into ist_vbap_ot even if the if condition is not met.
Please give me a simple solution as to how do I do it?
The code is as follows
Loop at ist_vbap into wa_vbap where matnr = wa_vbap-matnr.
Read table ist_vbap into wa_vbap with key matnr = wa_vbap-matnr
                                            matkl = wa_vbap-matkl.
    if wa_vbap-matkl eq 'ZCHCLUBFE'.
     wa_vbap-otext = '3. Club House Fee'.
      wa_vbap-otamt = wa_vbap-fakwr.
    endif.
if wa_vbap-matkl eq 'ZCHELWASA'.
    wa_vbap-otext = '4. External electrification, water & sanitary connections'.
    wa_vbap-otamt = wa_vbap-fakwr.
   endif.
if wa_vbap-matkl eq 'ZCHPROPAS'.
    wa_vbap-otext = '5. Property Assessment & Khatha Transfer charges'.
    wa_vbap-otamt = wa_vbap-fakwr.
endif.
if wa_vbap-matkl eq 'ZCHREGSDT'.
    wa_vbap-otext = '6. Stampduty, Registration (on prevailing valuation)'.
    wa_vbap-otamt = wa_vbap-fakwr.
endif.
if wa_vbap-matkl eq 'ZCHLEGFEE'.
    wa_vbap-otext = '7. Legal Fee'.
    wa_vbap-otamt = wa_vbap-fakwr.
endif.
if wa_vbap-matkl eq 'ZCHMAINTC'.
    write: wa_vbap-fakwr to ch_value1.
    write: wa_vbap-kwmeng to ch_value2.
    CONCATENATE '8. Maintenance Charges (Rs.)' ch_value1 '/-per sft. x' ch_value2 into wa_vbap-otext.
    wa_vbap-otamt = wa_vbap-fakwr * wa_vbap-kwmeng * 12.
endif.
if wa_vbap-matkl eq 'ZCHCORPFU'.
    wa_vbap-otext = '9. Corpus Fund equivalent to one years maintenance'.
    wa_vbap-otamt = wa_vbap-fakwr.
endif.
if wa_vbap-matkl eq 'ZCHPOPCHA'.
    write: wa_vbap-fakwr to ch_value1.
    CONCATENATE '10. Towards Park & Open space @ Rs.' ch_value1 '/-per sft.' into wa_vbap-otext.
    wa_vbap-otamt = wa_vbap-fakwr * wa_vbap-kwmeng.
endif.
    move wa_vbap-matnr to wa_vbap_ot-matnr.
    move wa_vbap-matkl to wa_vbap_ot-matkl.
    move wa_vbap-otext to wa_vbap_ot-otext.
    move wa_vbap-otamt to wa_vbap_ot-otamt.
    Append wa_vbap_ot to ist_vbap_ot.
   sort ist_vbap_ot by otext.
endloop.

Hi,
See I want to append into internal table ist_vbap_ot the contents of wa_vbap_ot especially the otext field along with the amount which will be zero even if the condition is not met.
For eg:
My ist_vbap_ot should contain
3. Club House Fee                                        0000.00
4. Extern elect.....                                         450065.00
5. Prop ....................                                    00.00
6. Stamd.....................                                 68752.00
10.         ............................                         12563.00

MDSModelDeploy Operation Failed, clone cannot be deployed, The Attribute Value is not valid

I've created a model containing a customer entity with various domain based attributes. I've populated the entities via a combination of manual entry and the staging tables. In the source system I have approx 950 customer records, all of which
fail validation on the source system as some of the attributes will be maintained only in MDS and are not in the source systems I'm pulling the initial data from.
I ran the MDSModelDeploy.exe to create a package containing data on the source system. I then ran the package to apply the package using the -deployclone option on my target system. I piped the output into a flat file for review.
Here is the error I'm receiving.
MDSModelDeploy operation failed. Elapsed time: 00:01:00.2314612
Error:
A clone of the "Subzero_1" model cannot be deployed.
An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
Package deployment failed with 344 errors
The attribute value is not valid.
The attribute value is not valid.   (repeated 344 times)
Any ideas what the issue might be? I have tried verbose logging as well and did not find anything that would point me in the direction of the problem. The end result was that the model was not deployed to the target.
I have also created a package without data, deployed that, then applied the data. This gets the model to the target and the data also appears to be there but I did receive this error on the deployupdate.
This is on SQL Server 2012.

I am seeing the same error. Created a model, Cloned the model. Made changes to the clone (Schema and Data), and used MDSModelDeploy UpdateModel to update the primary (not cloned) model. In looking at the log, I see the error shown below, but I do not
see anything that points to what was happening at the time.
I tried running a SQL trace to see if one of the SQL commands received an error, but none of the commands did.
In looking at the model that was updated, I can see all of the schema changes were made, and most of the data was updated. There is one table that did not update completely. The attributes in the table consist of Domain Specific and text attributes only.
I also verified that everything on both models was validated before starting.
In the weblog I see the error listed below, but there is nothing in the data that would match that value
Not sure were to go from here....
Chad
--- MDSMODELDEPLOY ERROR RECEIVED ---
MDS Error: 0 : Microsoft.MasterDataServices.WebUI.ServiceAdapterObjectInvalidException: An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.InspectResponseForErrors(MessageRequest request, MessageResponse response)
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.ExecuteRequest[TRequestType,TResponseType](MdmServiceOperation`2 operation, TRequestType request)
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.DoEntityMembersMerge(EntityMembers entityMembers)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.BatchEntityMembersMerge(Collection`1 masterData, Boolean membersOnly, Int32 batchSize, Int32 totalBatches, Collection`1 errors)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.UpdateData(Collection`1 masterData, Warnings errorsAsWarnings)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.DeployUpdate(Package package, Boolean includeData, Identifier targetVersionId)
   at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.DeployUpdate(String serviceName, String packageFile, String versionName)
   at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.Main(String[] args)
    DateTime=2014-02-06T16:03:17.8405277Z
-- WEB ERROR RECEIVED --
MDS Verbose: 0 : Unable to convert value of query string parameter Id = VID to an integer
    DateTime=2014-02-06T17:18:00.7367274Z

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

Error in InfoView "The Parameter Value is not Valid"

Hello,
I have developed a Crystal Report in CR2008 and uploaded in the InfoView. Now when i run the report via scheduling or load the report with the data and try to change the parameter (editable set in CR) from the drop down list and hit apply i get an error dialogue box "The parameter value is not valid" and message says "null".
Also another issue is that i cannot execute the report directly in InfoVIew, i have to schedule it to run the report. Report is connected to the SAP InfoSet.
Any input would be much appreciated.
Thanks.

We have rebuild new servers for InfoVIew and it just works fine. Both the problem solved.

The JCE Ffiles were not found

Hello,
I am sorry if this question was asked before. I did a quick glance and did not see a similar post. I am trying to run a command line tool, and it is giving me
"The JCE files were not found.
Please check that JCE files have been installed in the correct directory."
Please let me know where I should the JCE files and how to install them.
Thanks in advance,
Mustafa

I have never seen this message. It is not even clear to me when you get this message.

Release Strategy Triggered even if the characteric values were not correct.

Similar Messages

Maybe you are looking for