Release Strategy- two levels getting released at the same time

I have created PR release startegy using 4 levels of $$.
The first level (L0)is $0.00 to 1.00
The second level ( L1) goes from 1.01 to 500.00 etc
The level2 and 3 work fine but the problem I am running into is when I release level L0 the system automatically releasaes level L1 along with L0.
Has anyone seen this before? what am I doing wrong.
(my original system had L1, L2 and L3 and that worked fine but I had to add in L0 for buyre review so I created lower level dollar limit and I am now running into this dual release problem)
Need ideas/ help thanks
Raj

Hi,
Please check settings for release prerequisite in PO release strategy for L0 & L1.
Regards,
Manish

Similar Messages

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

Is there a way to work with two or more app at the same time on iPhone or iPad

Is there a way to work with two or more app at the same time on iPhone or iPad?

What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.

Can I connect my Mac to two separate wireless networks at the same time?

Need some assistance with some advanced wireless networking please....
Upstairs I have a D-link wireless router connected to the internet and wired to a couple of PCs. Downstairs I have a minimac linked to my hifi via an airport express. I have bought a D-Link DWL-G122 usb wifi dongle.
So I want the mini mac to connect to the airport express on one wireless network (strong signal) and to be able to connect to the internet on another network (weak signal) via the usb wifi /router.
But the airport software and the d-link driver seem to conflict and both try to take control of the two wireless devices.
Is there any way round this to be able to run one mac with two wireless network devices at the same time?
Thanks

While those with more experience may be able to correct me, I'm pretty sure that you can only connect to one wireless network at a time with your Mac Mini, unless D-Link provides their own proprietary software that bypasses the computer's Airport settings.
Using the AirPort hardware you can only connect to a single wireless network at any given time. However in this situation the 2 attempted connections are via USB and AirPort. Therefore this requires nothing special of the AirPort drivers or settings.
It does require that the Mac OS and applications have the capability to use either network connection (USB or AirPort) depending on what data they are trying to get. In general I understand how it is theoretically possible but I have no idea if you can configure OS X to do it.
...I believe one of the options when setting up the Airport Extreme Base Station is that you can extend a wireless network already in place.
True but the D-Link is not compatible with Apple's WDS therefore this is not possible in this situation.
If you have a newer Airport Extreme Base Station with a USB port on it...
FYI, every AirPort Extreme base station (AEBS) has a USB port.
BTW, birky has indicated that he/she is using an AirPort Express (AX) not an AEBS.

How to create a proxy that accept requestes get/post in the same time?

Hi everybody,
I have two questions with Service Bus 11gR1.
I have to create a proxy in https that accept request get/post in the same time, also this proxy should be able to recognize the common name of the certificate.
Is it possibile?
Thanks a lot.
Ettore

The approach I mentioned is part of correctly configuring client cert authentication. For client cert authentication to succeed weblogic expects the user derived from the certificate by the user name mapper class to exist ( just exist , it wont check the password) in its security realm. The problem you have mentioned is common for any type of 'authentication' and not just specific to this approach.
The user name mapper class can be configured to accept any attribute in the certificate DN as the mapped user. Since the thread starter is interested in CN, then he has to set CN as the mapping attribute.
Edited by: atheek1 on Nov 10, 2010 1:33 AM

Can two subVI show up at the same time?

Can two subVI show up at the same time?

Hi,
Save the vi as a template (*.vit), then you can open it (dynamically) as
often as you want. If you make the vi "floating", you get the best results.
Regards,
Wiebe.
"smal" wrote in message
news:[email protected]..
> Hi,
> What if the subvi has to be called dynamically (hence using call by
> refrence node).
> In fact I want to run a subvi each time a button is clicked
> independent of the others(it gets just some parameters from the caller
> vi & must continue running so the user can interact with it via its
> front panel )
>
> Thanks for your attention in advance.

Can iCloud on a Windows 7 PC be used with two different Apple accounts at the same time?

Can iCloud on a Windows 7 PC support two different Apple accounts at the same time?

You should be able to do this by using the Multifox add-on - http://br.mozdev.org/multifox/

How do you keep two users logged in at the same time?

How do I keep two users logged in at the same time to be able to access home sharing?

Fast User Switching in Users & Groups or Accounts preferences in Login Options.

One computer, but two user-accounts active, at the same time, in 10.6?

I'm contemplating this setup: A current generation MacPro (running SL), with two monitors. Can I have two separate user-accounts (the Admin account and one additional user-account) active and running simultaneously from the MacPro, but, of course, displayed separately to the monitor corresponding with that user-account?
Thank you!

you can have two accounts logged in at the same time via fast user switching but there is no way to display them at the same time on different monitors.

Can you use two duetts on logic at the same time

can you use two duetts on logic at the same time so i can have inserts

tracktor wrote:
can you use two duetts on logic at the same time so i can have inserts
Before going ahead on this you should definitely check with Apogee as I think they do not recommend using their interface(s) in an Aggregate device.
Maybe that's changed.. not sure.
pancenter-

HT203167 I downloaded two movies from itunes at the same time (both free digital copies from a dvd) and when they finished downloading... they disappeared. I've not been able to re-download them or find them.. anywhere. Any suggestions for tracking them d

I downloaded two movies from itunes at the same time (both free digital copies from a dvd) and when they finished downloading... they disappeared. I've not been able to re-download them or find them.. anywhere. Any suggestions for tracking them down?

If you downloaded them on your computer's iTunes then they should have gone into the Movies part of your iTunes library, if on a device (iPad, iPhone or iPod Touch) then into the Videos app - they haven't appeared there ?
If you downloaded on your PC and they don't show in the Movies section then you could try searching for them by name (or part of their name) via windows explorer and see if that finds them. Or if you downloaded them on a device and they aren't in the Videos app then have you got a film age rating set in Settings > General > Restrictions that is hiding them, and if not can you find them via the device's spotlight search screen (swipe your first homescreen to the right) ?

Having two oracle clients installed at the same time

Hi, I was wondering if there is a way to have two oracle clients installed at the same time on one computer, and if there is a way to be changing the default client between the two. I need to have installed the oracle client 10g and 8 versions on the same computer, because we have a problem with a legacy application that for some reason only works with version 8, and we need the 10g because our new applications requires 8.1 or later. We are still migrating to the new system but we developers need to have the two clients. Any help is appreciated. Thanks in advance.

Is it possible, sure.
Technically, clients before 8.1.5 were not multi-home compliant, so having Oracle 8 and Oracle 10g clients on the same machine is almost certainly not supported. On the other hand, I know that a number of developers at Oracle had combinations of Oracle 7 clients Oracle 8 clients, Oracle 8i clients, and Oracle 9i clients on their development machines at the same, so you shouldn't have too many major issues.
Most "default client" issues come down to which ORACLE_HOME is first in the system's PATH. Ideally, you would leave the Oracle 8 ORACLE_HOME first in the path and explicitly reference the 10g ORACLE_HOME when configuring anything that relies on the 10g client.
Justin

Two Calendar Windows open at the same time?

I would like to have two calendar windows open at the same time (with different months shown). Is this possible?

Nancy,
That is not possible with the current version of iCal.
If you find a need for that feature, I would invite you to Provide iCal Feedback.
;~)

Two records getting inserted with the same timestamp...

          hi all,
          I am trying to submit a form . Now whenever I click submit before I insert any
          data sent in that form I make a check (SELECT stmt. to see if that record can
          be inserted ...few business validations..) and if the check is successful I then
          proceed for the necessary insert into a table the Primary key for which is a running
          Oracle sequence.
          But if I click on the Submit button twice in close succession I have observed
          may be 1 in 1000 attempts I am able to submit two records with the same time stamp
          for the date of insertion . We are using Oracle 8 with weblogic 5.1. And I don't
          think ORACLE's date precision is beyond seconds.
          So any suggestion ..what is the best way to handle such things : one can be
          to place the same business validation check just before the ending brace of the
          method , or secondly sucmit the form thru javascript and don't submit it twice
          even if the user clicks the submit button twice... any suggestion which u can
          give .. are welcome.
          thnx in advance
          sajan


Is the pkey a timestamp or an Oracle sequence? The latter will always work,
          since no two requests to a sequence can get the same value (rollover
          excluded). If you must use timestamp, then you must auto-retry the insert
          if the first attempt fails. Oracle does have higher precision than seconds,
          but I can remember the exact precision ... I am pretty sure it works out to
          at least two or three digits though.
          Peace,
          Cameron Purdy
          Tangosol, Inc.
          http://www.tangosol.com
          Tangosol Server: Enabling enterprise application customization
          "Sajan Parihar" <[email protected]> wrote in message
          news:[email protected]...
          >
          > hi all,
          > I am trying to submit a form . Now whenever I click submit before I
          insert any
          > data sent in that form I make a check (SELECT stmt. to see if that record
          can
          > be inserted ...few business validations..) and if the check is successful
          I then
          > proceed for the necessary insert into a table the Primary key for which is
          a running
          > Oracle sequence.
          > But if I click on the Submit button twice in close succession I have
          observed
          > may be 1 in 1000 attempts I am able to submit two records with the same
          time stamp
          > for the date of insertion . We are using Oracle 8 with weblogic 5.1. And I
          don't
          > think ORACLE's date precision is beyond seconds.
          > So any suggestion ..what is the best way to handle such things : one
          can be
          > to place the same business validation check just before the ending brace
          of the
          > method , or secondly sucmit the form thru javascript and don't submit it
          twice
          > even if the user clicks the submit button twice... any suggestion which u
          can
          > give .. are welcome.
          >
          > thnx in advance
          > sajan

How can I get two cameras to aquire at the same time rather than one after the other

I've got (2) PCI-1428 cards, Two Uniq Vision cameras with power supplies, cameralink cables, and IMAQ-D6804 cables. Both cameras are being triggered by the same switch, but they are not grabbing images at the same time. Right now it is triggering one camera as desired, but the other doesn't aquire until after the time-sensitive event. On the next test, the two camera will trade these roles. I am using 2 cards, so they should acquire at the same time. How do I change it so that they grab images at the same time? Thank you for your help.
Deater

Hi Deater,
Thank you for your post. Triggering from two cameras at the same time may be a little trickey, but it can be done. There are multiple ways to tackle this problem. If you have a RTSI cable, you can RTSI the two PCI boards together internally to lock them in HW. You should also be able to use the triggering line on each board.
One of the best methods for triggering multiple boards is called GenLocking. The following Developer Zone page describes GenLocking more fully and has several examples to help you out: http://zone.ni.com/devzone/conceptd.nsf/webmain/a387b5c0ac6f6f4e86256c87005fcddf.
The "HL Grab with two boards.vi" shipping example is also a good example of the code needed to trigger two individual boards in LV. I found a similar post that may be of some help as well: http://forums.ni.com/ni/board/message?board.id=230&message.id=2691&requireLogin=False
Hope this helps!
Thanks,
Scott Savage
National Instruments
Applications Engineering
www.ni.com/support

Release Strategy- two levels getting released at the same time

Similar Messages

Maybe you are looking for