Release stratergy doesnt appear.

hi,
    I have noticed that some times when user creates a PO, release stratergy doesnt appear.
when he deletes it, and creates a new PO with same data, the release stratergy appears.
i am clueless why this happens??
i would be grateful if you could throw some light.
thanks and regards
rahul.

Check the data what he is inputting when release strategy appears and when release strategy doesnot appear. There may be some data different in input. Release strategy works in combination of characteristics. If one characteristic is missing, the release strategy does not appear.
In your case look up, in classification tab of release strategy, will tell you what characteristics are maintained there and then see the PO where release strategy didnot show up, there should be one of the characteristic missing in that PO, which is not letting the release trigger.

Similar Messages

  • I connected my new iphone 4 to itunes but now it wont recognise my old 3gs. My name doesnt appear on the left. i want to transfer all my songs to my new one but cant sync now. can anyone help

    i connected my new iphone 4 to itunes before backing up my old one but now it wont recognise my old 3gs. My name doesnt appear on the left. i want to transfer all my songs to my new one but cant sync now. can anyone help

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing.

    I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing the existing. This is irritting.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • HT2905 The function to show music duplicates doesnt appear on my ITUNES version 11.0.2.26

    I have many music files duplicates and I want to delete these files to organize correctly my library. The ITunes Help tells about a function that doesnt appear in my version, which is "File>Display Exact Duplicates".
    And, further more, are there other options to do that? For instance, may I reload an entire library, and configure Itunes to use only that new one library?
    Thank you all.

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Note with iTunes 11 an "empty" library may show all your purchases with cloud icons that allow them to be streamed or downloaded from Apple's servers.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    If, for some inexplicable reason, the media has been removed from your computer see Recover your iTunes library from your iPod or iOS device.
    tt2

  • Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
    If not successful, then time for an appointment at the Genius Bar of an Apple store.

  • Transaction type of sales order under Account overview doesnt appear

    Hi Experts,
    Need help, We are implementing the replciation of sales order from CRM 7 to ECC. Now i already manage to maintain the transaction types and created a link in navigation tool bar.
    Now the problem is the assignment block of sales order and quotation under account information create new button doesnt appear the transaction types i maintained under CRM->transactions->settings for sales transactions->define profiles for ERP transactions. and the sales order created doesnt appear on that assignment block as well..
    Any suggestion or ideas is welcome.. thanks in advance
    best regards,
    etrafanob

    Hi Etrafanob,
    New button on sales order assignement block in account overview page shows the list of transaction types which are maintained via below customizing.
    Spro->Customer Relationship Management->Define Transaction Types..
    All the transaction types which are active and defined in leading transaction category "BUS2000115 Sales" for the same Channel will be displayed.
    Not sure if defining those transaction types under erp sales order will help in this scenario..
    Hope this helps..
    Cheers,
    Sumit Mittal

  • Printer doesnt appear in the print options window when printing from an application like word etc

    Ok  this topic is all over the help forums but I have a couple of different observations not previously covered and all remedies that have been posted and worked for most havent worked for me
    First of all the Printer used to work with USB or NET connection and then suddenly unexpectedly stopped working. I cant say with 100% conviction whether this was when the upgrade to windows 7 occured or not
    things I have tried:-
    I have used the hp install wizard
    I have a downloaded the windows 7 update. 
    I can ping the device
    I can print a test page.
    The icon appears in the device and printer window but with an exclamation mark.
    I have tried NET STOP SPOOLER / NET START SPOOLER.
    I can scan docuemnts OK
    here is the part that I believe appears to be different from the other case on the forum.
    If I open a word document and select print the printer preferences dialogue window opens but no printer is visible to select. When I select add printer it shows my network then double clicking this opens a window showing a printer icon but its a previous version?? so when I select it as a printer to add nothing happens and it still doesnt appear as a selectable printer in the printer preferences pop up window. So doesnt print any thing
    Im lost for any other ideas to try

    I had already tried this and it didnt work on your advice I repeated the process with same results it appears in devices list but with an exclamation mark but trouble shooter fails to find any problem
     I refer you to the things tried and status in my first post i.e. I can ping the IP, I can scan. So my thoughts are now it must be something on my PC side that is the issue and not the printer or printer software.
    Could it be a security level issue that's the reason why  manual selection of add printer comes back access denied ??. Possibly  I need admin login. However I am the admin and single user of my PC anyway so I should have access.
    or some other PC setting why it doesnt see the printer in the printer settings when printing from an application ?

  • How do I retrieve a ringtone that I purchased before IOS7 but does not appear on my phone to activate? store that doesnt appear on my phone?

    How do I retrieve a previously purchased ringtone from the apple store prior to ISO 7 that doesnt appear on my phone as an option?

    You cannot retrieve ringtone for free. You need to buy again if you forget to transfer the ringtone from iPhone to computer iTunes.

  • Purchase order Release Stratergy-Error in Class CL01

    Purchase Order Release Stratergy:
    In CL01(create class) i have created the class FRG_EKKO and saved.Then in CL02(change class) under Basic data-Administrative data we found Assignment field tick is not selected and that is not in changeable mode.
    Because of that reason Error occured like Error in Class in SPRO release stratergy. Release is taking place in Development Server but not in Production server.
    Regards,
    Wilson Babu G

    Hi
    This indicator shows that objects are assigned to this class.
    The indicator is set automatically by the system.
    once you assign the class to any objects then this flag will come automatically.
    Please check if you have assigned the characteristics to the Class in CL02
    Please check if you have assigned the release strategy to the Class in CL24N
    Thanks & Regards
    Kishore

  • Dynamic text doesnt appear chinese word!!!!

    dynamic text doesnt appear chinese word.
    i have try to set to arial unicode but still cant.
    Pls help.
    THx

    I change that line but is the same result....
    If I have one event it look like this:
    and if I fill all events look like this:
    as you can see it doesnt align vertical....its the same alignment on the two images.... here is my code again...
    var urlLDR:URLLoader=new URLLoader();
    urlLDR.addEventListener(Event.COMPLETE,f);
    urlLDR.load(new URLRequest("hallsXML.xml"));
    function f(e:Event) {
        var xml:XML =new XML(urlLDR.data);
        TXThall.autoSize = "center";
        TXThall.text = "";
        for(var i:uint=0;i<xml.hall.length();i++){
            TXThall.appendText(xml.hall[i]+"\n");
    TXThall.y= Math.floor((stage.stageHeight - TXThasll.textHeight) / 2);
    My page size of the project is 768 * 1024 and the position & size of the dynamic text is X: 384.0    Y: 332.5  W: 664.0    H: 405.9...
    I dont know if it helps that data....
    Thanks for responding and I hope you can help me figure out this...

  • HT204291 airplay turned on but mirroring option doesnt appear

    I have turned on the Apple TV option via Airplay but the toggle to turn on Mirroring doesnt appear in my Itunes on my computer. I have a 2nd generation Apple TV with up to date software and an IMAC computer version 10.7.4 with up to date software. Any help?

    Yes, OK but - it seems to me that when a new software item is launched Apple has a history of singing the most exuberant praises to the latest capability they now have developed and only after demand has reached boiling-point do they, gradually, hint that you actually need to upgrade in order to take advantage of their new trinket. And - yes,... - well,, you know - you may have to, under certain circumstances, actually, in fact pay, you know...money...  That strikes me as dishonest, and links up with a very basic corporate strategy. First you lure them onto the caroussel, then you charge them. ITunes, for instance, is not for listening to music but for buying stuff - from Apple! Air Play and Home sharing is very strategically developed and limited in order to enable people in the Windows camp to include Apple items in their setups, but never to make it feasible for Apple users to jump ship and go for Windows Media Center or Android phones.
    Yes, Mirror was a key feature of Moubntain Lion. Less key was that it would not work with anything less.
    The strange thing is that since I switched from Windows rto Apple a few months ago I find myself at every turn a little more disillusioned by Apple and a little less inclined to act from any form of loyalty or trust - rather than what I expected, more and more confidence in the new environment where everyting is taken care of and solutions are part and parcel of this excellent colour-coordinated universe.
    And yes, I could buy Air Parrot, I guess, and it might work. But then again it might not. And at the next juncture I'd find myself having to make the choice again - paying to stay abreast of new developments and media or standing my ground and patching up my trusted set-up with another piece of gum...and another...and another...
    The price of Mountain lion is higher, but not that much higher, and I have to trust(?) that after that upgrade everything will work. If not I'll just have to look around for another...isn@t there something called Leopard?

  • Im From United Arab Emirates and I would like to purchase mini Ipad, however, the option for buying doesnt appear for me ?! is there a list of countries !!!!!?

    Im From United Arab Emirates and I would like to purchase mini Ipad, however, the option for buying doesnt appear for me ?! is there a list of countries !!!!!?

    Unfortunately, Toshiba USA doesn't ship there, and it's not available to download. You'd have to see if there's a third-party that could sell you it or have someone you know in the US order it and then ship it to you. Sorry.
    - Peter

  • My account doesnt appear in the drop-down box

    Hello!
    i forgot a password to one of my accounts (navladaster) and now im trying to get a new one using my email. i receive token and a security code, but when i enter it, the account i need doesnt appear in the drop-down box. This account used to be connected to another email address, though i remember changing the email on that account successfully. is there any way to get a new password now or at least to check to what email address it is connected now if didnt pay for skype services?
    Thank you so much!
    navladaster

    using another account, open the Add a Contact window and enter the possible email address/es that you may have registered in that account in the email address field.  Once you entered the right email address, the results will show the username of the account in question.  
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
    SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
    | skypefordummies.blogspot.com | 

  • What to do if the iphone icon doesnt appear on my pc when hooked to my iphone5s?

    what to do if the iphone icon doesnt appear on my pc when hooked to my iphone5s 16gb.
    I have tried diff usb cables.

    It should show up under DEVICES left side of the iTunes window in the source list. It's not an icon. It will say:  (your) iPhone
    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for OS X

  • Release stratergy

    Hi all,
    We r processing PO through Release stratergy.
    some time we need to change the  payment terms after the release of PO.
    So its amendment of PO & we need to process the PO again through Release process.
    but its not happening so.
    Regards,
    Supriya.

    Hi Supriya
    Did you have a characteristic for the field Payment terms as a char? I guess not. Please remember release strategy will work (again) provided you have the characteristics for the filed you wish to change in your rel class and in turn if it is assigned to your rel. group. You also have to set the release indicators as 6 for re_appear of the stg if you change the char value. Please use chars. which you can validate and change often and more importantly exists in CEKKO structure.
    Regards

Maybe you are looking for