Release stratgey on Cost Centres

I want to make release strategy with Cost centre on purchase orders.but in CEKKO table there is not filed of cost centre..How i make characterstics of cost centere? More over I want to know that is it necessary to enter table name and field name while making characterstics.? How system know for cost centres if no linkage is made.?

Hi,
Create characteristic CEKKO  with KONNR,
Use user exit enhancement M06E0004 to populate value for KONNR based on the cost centers & for the value in EKPO - KOSTL ,get the department name from custom table and pass to CEKKO-KONNR.
For more check SAP Note: 493900
Or
You can thought of keeping purchasing group as release characteristic & create  purchasing group  as department and create a cost center & assign department to cost center in KS02 in basis data TAB.
Regards,
Biju K

Similar Messages

  • MM Release Strategy with Cost Centre

    My characteristics for the release strategy is Accnt Assigmnt (KNTTP), Cost Centre (KOSTL) and Amount (GSWRT). I link all to the ceban straucture, and for the cost centre, I entered in the value tab the cost centres that I am using, and I entered the cost centres in the release strategy. Everything seem OK for the release strategy, but the release strategy is only selecting the strategy according to the values and not considering the cost centre, what can I do let it consider the cost centre and the value. I have been struggleing with this problem more than a week now. I tried everything that I can think of. Can someone assit me in this matter. I am on ECC 6.
    Thank you.

    Refer OSS Note :: 52225
    Solution ::
    Summary
    Symptom
    Purchase requisition release strategy with classification does not work as expected when the characteristic for cost center KOSTL is included.
    Message  ME297 is displayed.
    Additional key words
    CEBAN-KOSTL, KOSTL, Cost center, Release strategy, OMGQ, ME297
    ME51, ME52, ME53
    Cause and prerequisites
    Numeric values used for the cost center characteristic in the purchase requisition release strategy with classification is not recognized. CEBAN-KOSTL is a CHAR field of length 10.
    Solution
    Enter leading zeros for the cost center value in the release strategy. eg. If the cost center value is 123456, while entering this value for the cost center in the release strategy, enter it as 0000123456.
    Cheers !!!!!!
    Biswajit

  • Rel. strategy is not triggered while creation of PR with cost centr

    Hi Gurus,
    While creation of PR release strategy is not getting triggered with cost centre BCWSV870. But release strategy of PR triggered for cost centre BCWSV852 (In PR changed only cost centre as BCWSV852 instead of BCWSV870). Both cost centres are similar and the both cost centres are exist in characteristics value in CL20N for the same release strategy.
    My question is why for one cost centre triggers release strategy triggers and for other cost centre release strategy is not triggered. Can you please tell how come this and rewarded for answer this.
    With regards,
    C. Sundar Rajan

    Hi,
    In regard to problematic PR with cost center BCWSV870, was your PR maintained with only one line item? or multiple line items?.  In additions, when defining cost center as part of the release strategy structure, did you enter all cost centers with leading zeros?  Tak a further look into OSS Note 365604 for your further investigation.
    Cheers,
    HT

  • Purchase Requistion with respect o cost centre

    Hi,
    My client is asking for a specific reqmt.
    Is there any possibility of configuring the release process for Purchase requistions with respect to cost centre threre are some where around 100 cost centres. if it is so how can i go ahead?
    Can any one guide me.
    Sunil

    Hi Sunil
    you can do like that what is your client requirment
    for this requirement you will have to create the Characteristic for Cost Center and assign this Cost Center Characteristic to Class
    That is the similar Process whatever you have create for item value and Plant only you will have to create the Characteristic with respect to cost center
    and all cost center to whom do you want to include, you will have to define in Classification tab
    all the process is same
    i hope this will make you more clear
    Thanks

  • Mapping of users to cost centres

    Hi Experts,
    How to mapp users as approver and substitute approvers for cost centres in PR Release Strategy
    Please help.....
    Thanks in Advance
    Prashanth

    Hi
    Check these links.
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE
    PR Release Strategy for Cost Center and Asset

  • How can we create cost centres in SAP B1

    please advise how we can create cost centres in SA P-B1 as we do in tally.

    Hi
    You can Download the e-learning File in SAP Customer portal regarding cost Accounting
    Go to [http://service.sap.com]
    Customer portal =>Education=>Release 2007 => Finance=> cost and Budgeting
    Regards
    Balaji

  • PR approval via cost centre / Budget alignment

    Hi ,
          How does the cost center structure need to be set up to enable PR approval via cost center/budget alignment?

    Hi,
             Currently i am using PR Release strategy without classification and now I want to shift from without classification to with classification as we want to alogn the PR approval process to cost centre.And also want approval of PR should on total basis not line by line item.I think with classiifcation we can align PR Approval process by total .
    What is your opinion and suggestion?
    Thanks
    AC

  • Resrticting Goods receipt based on cost centre in EBP Version 2.0

    Hi,
    I am working with EBP2.0 version & I need to know whether I can restrict the GR with ref. to cost centre in EBP. (ie. Receive any order functionality. We have not defaulted any cost centre & the user will enter the cost centre & GL a/c at the time of creation of shopping cart only.
    Is it possible to restrict the Goods Receipt with ref. to cost centre in EBP2.0 version. If so then please let me know how to go about it.
    Your immediate response is very much appreciated.
    Regards
    Raghu

    Hi  S.R.P.         
        There is no control  between GI and GR, you have to make a control using UDF
    for example
    1.Add UDF in GR called GI Number
    2.and make this field mandatory using SP
    3.Ask the user to enter GI number
    4.If user enter GI number in GR then choose the item code in GR means,using FMS you can also do automatically load a Warehouse,price,Account code what ever in GI.
    5.using sql query report u will get control
    Edited by: Prasanna s on Sep 16, 2009 10:33 AM

  • Automatic settlement to particular combination of cost centres and gl codes

    HI,
    A company uses Plant Maintenance for Engineering overhauls. MM is used for Engineering spares only (i.e. not for goods for resale etc).
    The requirement is to set up ongoing Plant Maintenance Orders, one for each item of plant (only 600). The plan is just to leave them open, as they are only used at a simple level.
    Anyway, for each PM order, the requirement will be to settle automatically, and to a particular GL code and a particular cost centre.
    So, for three different works orders:-
    Cost Centre -
    >   333     334     335
    GL code
    1234----
    >(X)
    1235----
    >(Y)
    1236----
    >(Z)
    1) What is the best way to achieve this? I am thinking that GL code will be specified by order type (therefore I will need about 10, corresponding to the GL codes) and cost centre will be specified by Work Centre in each order.
    2) How do I set up automatic settlement? Can this be at period end only or instantly when good are booked to the order by the stores.

    Hi ,
    For Plant Maintenance with FICO , you need Settlement rule & settlement profile.　
    The settlement rule determines what portions of a sender's costs are to be settled to which receiver(s).
    In thesettlement profile you determine to which objects orders of this order type can settle to. You can also assign an order type to a settlement profile at a later date. You can change the settlement profile in the order.
    After you create the settlement profile , you need to save the profile to particular order type.
    Inside the settlement profile , you will define the control parameter of how is the way to settle included which cost center to post.
    For automatic settlement , i think you need user exist - Please refer to userexit IWO10027 or COOM0003 with your abaper.
    Thank you.

  • BI FI and Cost Centre Reconciliation

    Hi
    I have a requriement to create a GL reconciliation report between Finance and Cost centre data, i have a multi sitting over the relevant cubes and the data is coming through.
    The report is as follows
                     |_FI Total__|___Cost Centre Total__|__Difference_(should = 0)
    GL Account |                  |                                  |                   
    For the cost centre data the report should bring through the data where the cost element = GL account in the row,
    ie GL Account - 60000
    FI Total - GL Account - 60000
    CC Total - Cost Element - 60000
    Difference - FI - CC
    Any ideas on how i can do this or if this is possible?
    Thanks
    Josh

    Hi Harshal
    Yes i was able to create this report, i had to create an infoobject ZFI_GLCE with 0GL_ACCOUNT as a ref. characteristic.
    Then i created a cube and had transformation going from YCOOM_C02 (CO-OM: Costs and Allocations (Delta Extraction)) to the cube where i mapped the Cost Element to ZFI_GLCE and then also had another transformation from YFIGLO02 (General Ledger: Line Items) to the cube mapping the GL Account to ZFI_GLCE.
    Could you further explain the problem you are having with the GL Accounts?
    Josh

  • Limit SC showing Zero value in report SC per cost centre in SRM portal

    Hi SRM Gurus,
    On executing SC per cost centre report avaialble in SRM 5.0 Portal I am getting value of limit SC as zero. while in all other follow on documents i.e. PO and Invoice its displaying the value.
    Is it due to the fact the for Limit Items we don't have any GR/confirmation i.e zero quantity? and the value column field has Sigma symbol on it. so maybe it is multiplying quantity with the value here?
    Is this SAP SRM standard for limit items to show zero value in this report ?
    Please let me know. Thanks for the help.
    Regards,
    Varun Dhawan.

    SRM experts please help in this regard. Any insights on LIMIT Shopping carts??

  • How to assign search help for custom cost centre field in SRM 7.0

    Hi Experts!!
    We are currently working in SRM 7.0.As per our business requirement, in account assignment tab we need to use a custom
    cost centre field (ZCOST_CENTRE) instead of standard cost centre field.It is observed that for standard cost centre field there is a standard web-dynpro search-help assigned where it will return the F4 search help values from backend.
    Can any one of you please help me how can I assign the search-help for the custom cost centre field. Is there any FM to call the backend cost centre search help for custom field or any other way how can I achieve this?
    Thanks in advance.
    Regards,
    Kalyani

    kalyani,
    i can see your requirement in below way..
    as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
    so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH                        
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH     INTERFACECONTROLLER
    so you can replicate the same functionality for your z field.
    but can you clarify one thing.. why are you going for this z field in place of standard field ?

  • Po with account assignment cost centre

    dear friends,
    When creating PO with account assignment cost centre, system should default GL account (i.e G/L will be picked automatically instead of entering manually.
    How this can be customized?
    regards, thanks

    The following configs are required.
    1. SPRO -> MM -> Purchase -> Material Master -> Entry aids -> here you maintain all relevant material groups, corresponding valuation class and Purchasing valuation key
    2. Then in OKB9, you will maintain company code, cost element, and cost center
    3. THen in OBYC, Valuation group code, valuation class and GL account.
    With the above settings, the system will automatically detemine the GL account.
    Thanks and warm regards,
    Jagadeesh

  • Field cost centre is a required field for GL account Error

    The error that I get during a sales transaction is: Field cost centre is a required field for GL account Error. Where or which transaction in FI do I use to maintain this setting.
    Thank you.

    Hi,
    Goto Tcode - OKB9. Search for that G/L account number under your co. code. There select the row, you can maintain the cost center directly. Else for Account assignment detail column, keep it as 1(Valuation area mandatory). Then under new entries maintain the valuation area, which is nothing but the plant, and against that maintain the cost center.
    Hope this resolves your query.
    Please let me know if you need any additional information.
    Thanks,
    Prithwiraj.

  • Split Cost centre - PO Commitment

    Hi ,
    I have a SC - PO with multi account assignment ( 50 % split on 2 cost centres) , this was raised by mistake and i want to Delete the PO to put the commitment back .I can't delete the PO in the back end based on the deployment scenario.I have done the Confirmation for Zero quantity to put the money back but this did not happen.Generally it works for Zero Quantity confrimation every time for single account assignment.
    Is there any way to put the commitment back ?
    Regards,
    Richy

    I have a similar issue, can you tell me how did you resolved this one?

Maybe you are looking for