Release untill date in past In QIR

Hi All,
I am facing on problem,
The materail has inspction type 01 as active. The QM procurement is active with control key 0000. The QIR has a setting as NO INPECTION. The release until date in QIR is in past but still the PO was created, When we create the PO it shows the stock type as QUAlITY but when we make GR it is posted to intesricted and no inspection lot is created.
AS the release date is in past
1) PO should not be created.
2) System should take quality settings from material master and not from QIR as the release untill date in past.
Can you please advice how to achieve this?
Thanks.
S J

You have selected 0000 as the control key. This basically means the QIR release date has no affect. You need to use a control key where at least "release required" is set in the control key such as "0001".
As far as the lack of an inspection lot, you have the vendor as being a certified vendor and no inspection is required. This is always in effect regardless of the release date of the QIR. SAP assumes you wouldn't be able to create a PO because of the release date to start with. So the insp. control never comes into play. But because you had a 0000 control key, the release date isn't in play, but the insp. control still is.
I.e. The insp control does not check the release date.
FF

Similar Messages

HT4059 Pre-ordered book & released date has past. Won't download.

Pre-ordered book. Released date has past & it won't download.

Hey Talibabs,
I see that you are seeing an issue with a book you have purchased in the iBooksstore. Use the following article to help you report this issue and receive assistance:
Report a problem with an item purchased from the iTunes Store, App Store, Mac App Store, or iBooks Store - Apple Support
https://support.apple.com/en-us/HT204084
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

QI record Release By Date

Dear SAPIENTS,
I would like to know is there any setting for maintaining Release By date on release tab of quality info record.
The date its taking for all vendor is 01.01.2999. If I am taking different date then in PO the error come QI record not maintained for the particular vendor.
I wan to know the complete setting for this field.
Regards,
Kaushal Rai

Hi Kaushal,
I think you are asking about the field 'Release Until".
it represents the date up to which the Q - Info Record for Material-Vendor-Plant is valid.
Now to rectify your query change this date and set it prior to the PO creation date.
Let me know how are you maintaining the Q - Info Record creation on SAP. If it is through LSMW then check, is this field is made default???
Regards,
Shyamal

HT204088 how can I get my order # on a pre-ordered album ? it's been paid for, but album doesn't release until May 21.

how can find the order # on a pre ordered album. It's been paid for, but the album isn't released until May 21. I need the order number now, for a contest promotion. thanks.

Hello MaineMoxie,
This information from the iTunes Store explains the Pre-order process:
http://help.apple.com/itunes/mac/10.0.1/interface/index.html#itns3165
To pre-order an item, click the Pre-order button next to the item. When the item is available for download, you receive an email notice. You aren’t charged for the item until you download it.
To download a pre-ordered item, click the link in the email notice or open iTunes and choose Store > Check for Available Downloads.
To view, cancel, or see the expected release dates for pending pre-orders, choose Store > View My Account, and click Manage Pre-orders.
Hope this helps!
- Judy

Delivery date in past in scheduling agreement

Hi
In ME38 , when I try to change delivery schedule for a line item from 05/07/2008 to 02/08/2008 , system is giving below error .
*Delivery date is in past *
I am ignored this message and pressed enter and saved the scheduling agreement .
Just I need to know , does this error has any ramification in any way .?
Thanks in Advance

Hi,
In SAP the delivery date is not taken in Past,so it is showing you warning/error message.
It is not advisable to have delivery date in past.This is inturn cause problem when you going forward & want to evaluate vendor on delivery performance.
Thanks,
AMIT

Start date in past

Hi all ,
What for the need / concept of the Stat date in past has been given in Scheduling paramters ?
or why i have to create the order in past date when practically i can not mfg the prodcut in past ?
Thanks in adv .
Regards

Hi,
For every production order we are scheduling with some cushion time because of many interruptions. These cushion timings given in schedule margin key.
As per system schedule , production start date in the past. We can not start production from the past date.
But with these cushion timings float before production, opening period we can eleminate & possible to start production from today.
So no need to reschedule the order.
Hope this helps you.
Regards,
Dharma

How to get out of pause until date if target is achieved?

Hi,
We are developing a SharePoint Designer 2013 platform workflow on Office 365 SharePoint Online. Following is what we are trying to achieve:
Document Library workflow.
There are 3 users involved e.g. UserA, UserB and UserC.
There are 2 content types e.g. Notification Letter and Statement Method.
As soon as UserA uploads/adds a document the workflow kicks-off.
An email is sent to UserB where he verifies it and select a dropdown verification complete.
This workflow also kicks-off on item change hence it creates a task process and assign UserC a task.
If UserC rejects the task, the email is sent to UserB and he has to resubmit.
However if UserC approves it then it goes to the approval folder.
In the above process we need to have reminders/notifications to UserC. There are 3 reminders. As soon as the document is added the document should be sent to the approval folder within 30 days (cut off) from the item creation date. First reminder 7
days before the cut off date. Second reminder 2 days before the cut off date. Finally the last reminder on the cut off date itself.
If I set Pause Until Duration event then the workflow as expected doesn't do anything till the date. How to break the Pause Until Duration if the UserC approves the task within the date range before cut off date.
I was thinking of loop but couldn't figure out how to achieve it in a better way.
Thank you
Tanzim
Tanzim Akhtar

http://blog.qumsieh.ca/2012/01/27/sharepoint-designer-workflow-pause-until-date-change/
Here the user break the pause duration using code. if you don't want to code means just split the workflow into two
One for managing approval
One for managing Email
So that the pause state in email workflow will not affect the approval workflow.
Also in Email workflow we have check the approval and moved status so it will not send the remainder mail to approved request
Ravin Singh D

In Windows 7 using Adobe Reader XI (11.0.07) was able to copy an item (name, number, date) and paste in another document. In Windows 8.1 using same version of Adobe Reader XI (11.0.07) not able to do this. Any solutions?

In Windows 7 using Adobe Reader XI (11.0.07) was able to copy an item (name, number, date) and paste in another document. In Windows 8.1 using same version of Adobe Reader XI (11.0.07) not able to do this. Any solutions?

With computer running Windows 7 using the curser can select an item, then right click and select copy. With computer running Windows 8 there is a hand instead of a curser therefore unable to select an item, therefore unable to copy. Is there a way to have a curser rather than the hand?
Eureka!!! Just found by right clicking on the hand can then select “Select Tool” and then copy. Hurray!!!

Logic required to findout "Release To Date" of the Purchase order

Hi
We are developing a custom program to release purchase orders as per clients requirements. In that, in the output, we need to display the "Release To Date" of the purchase order. Consider the release codes are R1,R2& R3, and currently the PO is released by R1, then we need to show "Release To Date" as R1. Simillerly once R2 also released the PO, we need to show "R1 R2" in the Release To Date field. This you can see in the Release Tab of the PO.
Now we need to adopt the same logic in our custom program also. Which table i can find the release to date details. The latest release code of the PO also good enough to build the logic to findout the "Release To Date"
Any pointers would be of great help.
Thanks
Venkat.

Hi Venkat,
Check up these tables
T16FC, T16FD, T16FG, V_T16FC
Regards,
Hareesha
If it's help's reward the pts

Order confirmation with delivery date in past

Hello everybody,
In the SNC portal, we have a lot of old Purchase order which are not confirmed, and when we try to confirmed them, we have the error below :
Order XXXXXXXX, item 00010, schd. line 0000000002: delivery date lies in past
My client wish create a super user (admin ?) who can confirmed a Purchase Order item with a delivery date in past (for example 06/08/2011).
Is it possible to create such profiles? If so how to configure it in SNC.
Are there other solutions ?
Thank you very much for your help.
Stéphane.

Hi Stéphane,
Normally in a standard SAP settings Purchase order confirmation in past gives warning message but you can have PO confirmation in past from warning to error or Information.
Go to SPRO>Supply Network Collaboration>Basic Settings>Validation>Own Settings-->Maintain Settings in Validation Profiles
Maintained below setting if you want message as information (No error or warning message)
Profile:POC2
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:I
Save Mode:Save Message as Valid
Continuation Mode:Continue checks
Profile:POC3
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:I
Save Mode:Save Message as Valid
Continuation Mode:Continue checks
Maintained below setting if you want message as error
Profile:POC2
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:E
Save Mode:DO not Save Message
Continuation Mode:Discontinue checks
Profile:POC3
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:E
Save Mode:DO not Save Message
Continuation Mode:Discontinue checks
Maintained below setting if you want message as warning
Profile:POC2
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:W
Save Mode:Save Message as Valid
Continuation Mode:Continue checks
Profile:POC3
Validation check:PO_DELVRY_DATETIME_IN_PAST
Msg.Type:W
Save Mode:Save Message as Valid
Continuation Mode:Continue checks
Above setting is a generic setting for all user and If you need User specific setting then it is a customization required.
Regards,
Nikhil

How to compare current date with past date

Sample code for comparing current date with past date
i dont want to Calender.set method to compare it.
How can i do it?

PLEASE stay with ONE thread:
http://forum.java.sun.com/thread.jspa?threadID=5143991&tstart=0

Document date in MIGO takes any date in past and future

All SAP Gurus,
We have a problem with Document date in MIGO taking any date in past and future.
We want to restrict this date, although this (document date) has no relation with posting of the document.
Can it be done?
Regards,

Hi
Check the below message setting if it works and set it to E mode
in mm-->Purchasing->environment data-->Define Attributes of System Messages->system messages----> New entries
00 06 028 Purchase order date is in the past
For future you may have to go for an enhancement. Check out
Regards
Edited by: samuel mendis on May 22, 2009 9:02 AM

Regarding PR release level dates

Hi All
In a Z Report , I want to take the Release date for a PR. In EBAN , table , last level approval date is available.But , I want to have all release level dates. How to acheive this??
Regards
Karthikeyan

Hi
Thnx for your reply.If the PR has 3 release levels , R1 on jan1 , R2 on Jan 3rd , R3 on Jan 5th
I want to capture these 3 dates. Can u tell how to retrieve these dates?
Regards
Karthikeyan.P

Release note data retrieve

hai experts,
the issue is dealt with retrieving the data of the release note when the purchase order is rejected by any autority they will give the reasons of rejection in the release note under the text tab at the heade level of purchase order
when the same release is reset by the end user or originator of purchase order they will do the necessary changes according to the rejection reasons and reset the po
but the issue is the originator can able to edit or delete the text given by the rejection authority by which it is difficult know the actual reasons of rejection and traceability of the release text data
please suggest me how to trace the data given in the release note if it is edited or deleted by any person who is have the authority of change purchase order
with regards
Uday

Hello,
The release notes have been updated. http://helpx.adobe.com/en/flash-player/release-note/fp_12_air_4_release_notes.html
Maria

MDBT with planning date in Past "01.01.2010".

Hi Guru,
I need some help.
Scenario: We made one variant in MDBT with planning date in Past "01.01.2010". But I could not Analise the effect of same.
Can any one share what is the effect of planning date in Past.
Thanx & Regd
PNU

Hi,
creation of varient in the past date will not have any effect. All that effects is scheduling the varient.
Correct me if i ma wrong.
Thanku
krishna

Release untill date in past In QIR

Similar Messages

Maybe you are looking for