Release Value not Updated to Value Contract
Hi,
I'm trying to set up a value contract and subsequent sales order (release or call off orders).
My document flow and copying control have been set up such that after I have created a value contract, I can create a sales order with reference to the contract. The contract data and items get copied over to the sales order. But after I have saved the sales order, the release value is not updated. Also the reference status in the contract item is 'Not reference'.
Did I miss out any important configuration?
Help would be greatly appreciated.
Thanks,
HweeLing Tay
Hi,
Yes the update document flow indicator has already been checked 'X'.
The contract item category completion rule has already been set as 'E'. I have tried with C or D but still doesnt work.
Any suggestion?
Thanks,
HweeLing Tay
Similar Messages
-
Contract value not updated in open order value of credit management
My requirement is i have created the contract and activated the credit management by assigning credit group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
But when i create the contract , the open order value is not updated .
i do not want the credit to be active at order level.
Dear guru's
please let me know where i am going wrong
thanks in advancehi,
open sales orders value not updating currectly in sales value of CM
http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
i think you have to run a report which is under the link number 1.
regards,
balajia -
Statistic condition values not updated during Sales order Settlement
Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
ThiruHi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh . -
Multicolumn listbox value not updating
we are vi in which we need to update values to listbox, from subvi to main vi, there are several buttons in our subvi and for every subvi there is further one low level vi which appears as popup window, what shold happen is when i calling the lowest level subvi, it has some controls and indicators, those values should get updated to the subvi for every low level vi i have to add value to listbox instead of replacing, it is updating correctly if some element is already there in listbox but if we are clearing that listbox after than trying to add value to it, it is not updating the value. There are 2 columns in listbox , to the first column we want to add the serial number for each device and to the second column we want ti add item description, but the only problem we are facing if listbox is empty it is not updating the value.
below i am attaching the program, this problem is coming in instrument vi( which is subvi to top level vi,) and all other low level vi( every control on instrument vi is low level vi)
Attachments:
Automation start.zip 1069 KBThank you for reply,
below i am attaching the same vi in lower version, i am not getting solution to this problem, why this listbox is not updating if it is not initialized to any value.
Attachments:
Automation start.zip 753 KB -
Subscription value not updated despite payment made days ago
Please help this is frustrating have been waiting for 3 days now payments have been made but subscription value not updated on skype account
Hello and welcome to the Skype Community.
You have totally different issues. ALWAYS start your own topic please.
1.0. Philippines Subscription.
Your account shows that you have used your full minutes allocation in your current billing cycle and your next minutes will be added to your account when your next billing cycle starts on July 17th 2015.
Renewing your monthly Subscription before your billing cycle ends has no effect on the date upon which your minutes allocation will be added to your account.
To continue calling until your next minutes allocation is applied to your account please purchase either a Subscription but with a different amount of minutes or Skype Credit.
2.0. Your account shows that you are calling a cellphone in Austria. Please note that only calls to landlines in Austria are included in the Unlimited World Subscription. -
Discount value not updating at contract header level
Dear Friends
I am facing problem of updating discount value at contract header level. The scenario is u2026. my client used to provide certain service to their customer. For that they maintain quantity contract & bill them as per billing plan. When customer avail three or more services they get 10% extra discount. Now the problem is after continue for some days if some customer wants to drop one item we are cancelling the line item by assigning proper cancellation procedure but the system is not reversing the 10% discount.
Example u2013
Contract valid for 1st Jan 2009 to 31st Dec 2010(Value for each service = 10)
(Total no of item-3)
(Discount-10%)
Here bill value for each month is 10x3-(30x0.10) =27
At the month of march 2009 customer decided to drop for one item so hence forth the bill value should be 10x2=20
But the system is calculating 10x2-(20x0.10)=18
We need to update the value at contract header level only to satisfy some CRM functionality.
Please suggest how to solve this issueHi,
If that is item condition then you can not change it at header level
check in M/06 make it at header level in change which can be made tab
Regards
Kailas Ugale -
Release PO value not updated to GOA
Hi Gurus,
when I create a PO on ECC releted to an SRM GOA, the release value is not update to SRM.
When I creat a PO, the outbound idoc form ECC is created correctly but the inbound idoc on SRM show an error like "object linkage not found"
Pls help.
Thanks,
MarcoHi Marco,.
We had similar issue , resolved by application of OSS notes : 656181
1028659
Thanks , Sunil -
Not Updating the Values in the JComboBox and JTable
Hi Friends
In my program i hava Two JComboBox and One JTable. I Update the ComboBox with different field on A Table. and then Display a list of record in the JTable.
It is Displaying the Values in the Begining But when i try to Select the Next Item in the ComboBox it is not Updating the Records Eeither to JComboBox or JTable.
MY CODE is this
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.DefaultComboBoxModel.*;
import javax.swing.table.*;
import java.sql.*;
import java.util.*;
public class SearchBook extends JDialog implements ActionListener
private JComboBox comboCategory,comboAuthor;
private JSplitPane splitpane;
private JTable table;
private JToolBar toolBar;
private JButton btnclose, btncancel;
private JPanel panel1,panel2,panel3,panel4;
private JLabel lblCategory,lblAuthor;
private Container c;
//DefaultTableModel model;
Statement st;
ResultSet rs;
Vector v = new Vector();
public SearchBook (Connection con)
// Property for JDialog
setTitle("Search Books");
setLocation(40,110);
setModal(true);
setSize(750,450);
// Creating ToolBar Button
btnclose = new JButton(new ImageIcon("Images/export.gif"));
btnclose.addActionListener(this);
// Creating Tool Bar
toolBar = new JToolBar();
toolBar.add(btnclose);
try
st=con.createStatement();
rs =st.executeQuery("SELECT BCat from Books Group By Books.BCat");
while(rs.next())
v.add(rs.getString(1));
catch(SQLException ex)
System.out.println("Error");
panel1= new JPanel();
panel1.setLayout(new GridBagLayout());
GridBagConstraints c = new GridBagConstraints();
c.fill = GridBagConstraints.HORIZONTAL;
lblCategory = new JLabel("Category:");
lblCategory.setHorizontalAlignment (JTextField.CENTER);
c.gridx=2;
c.gridy=2;
panel1.add(lblCategory,c);
comboCategory = new JComboBox(v);
comboCategory.addActionListener(this);
c.ipadx=20;
c.gridx=3;
c.gridwidth=1;
c.gridy=2;
panel1.add(comboCategory,c);
lblAuthor = new JLabel("Author/Publisher:");
c.gridwidth=2;
c.gridx=1;
c.gridy=4;
panel1.add(lblAuthor,c);
lblAuthor.setHorizontalAlignment (JTextField.LEFT);
comboAuthor = new JComboBox();
comboAuthor.addActionListener(this);
c.insets= new Insets(20,0,0,0);
c.ipadx=20;
c.gridx=3;
c.gridy=4;
panel1.add(comboAuthor,c);
comboAuthor.setBounds (125, 165, 175, 25);
table = new JTable();
JScrollPane scrollpane = new JScrollPane(table);
//panel2 = new JPanel();
//panel2.add(scrollpane);
splitpane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT,panel1,scrollpane);
splitpane.setDividerSize(15);
splitpane.setDividerLocation(190);
getContentPane().add(toolBar,BorderLayout.NORTH);
getContentPane().add(splitpane);
public void actionPerformed(ActionEvent ae)
Object obj= ae.getSource();
if(obj==comboCategory)
String selecteditem = (String)comboCategory.getSelectedItem();
displayAuthor(selecteditem);
System.out.println("Selected Item"+selecteditem);
else if(obj==btnclose)
setDefaultCloseOperation(JDialog.DISPOSE_ON_CLOSE);
else if(obj==comboAuthor)
String selecteditem1 = (String)comboAuthor.getSelectedItem();
displayavailablity(selecteditem1);
//System.out.println("Selected Item"+selecteditem1);
System.out.println("Selected Author"+selecteditem1);
private void displayAuthor(String selecteditem)
try
{ Vector data = new Vector();
rs= st.executeQuery("SELECT BAuthorandPublisher FROM Books where BCat='" + selecteditem + "' Group By Books.BAuthorandPublisher");
System.out.println("Executing");
while(rs.next())
data.add(rs.getString(1));
//((DefaultComboBoxModel)comboAuthor.getModel()).setVectorData(data);
comboAuthor.setModel(new DefaultComboBoxModel(data));
catch(SQLException ex)
System.out.println("ERROR");
private void displayavailablity(String selecteditem1)
try
Vector columnNames = new Vector();
Vector data1 = new Vector();
rs= st.executeQuery("SELECT * FROM Books where BAuthorandPublisher='" + selecteditem1 +"'");
ResultSetMetaData md= rs.getMetaData();
int columns =md.getColumnCount();
String booktblheading[]={"Book ID","Book NAME","BOOK AUTHOR/PUBLISHER","REFRENCE","CATEGORY"};
for(int i=1; i<= booktblheading.length;i++)
columnNames.addElement(booktblheading[i-1]);
while(rs.next())
Vector row = new Vector(columns);
for(int i=1;i<=columns;i++)
row.addElement(rs.getObject(i));
data1.addElement(row);
//System.out.println("data is:"+data);
((DefaultTableModel)table.getModel()).setDataVector(data1,columnNames);
//DefaultTableModel model = new DefaultTableModel(data1,columnNames);
//table.setModel(model);
rs.close();
st.close();
catch(SQLException ex)
}Please check my code and give me some Better Solution
Thank youYou already have a posting on this topic:
http://forum.java.sun.com/thread.jspa?threadID=5143235 -
Hi,
One customer has risk category as medium and in OVA8 like as below
No credit check 0
Deviation in % 0
Item check X
Static C Open orders Open deliveries
Dynamic X Horizon 0 T
Document value B Max.doc.value 3,000,000.00
Critical fields A
NextReview date Number of days 0
Open items A Max.open.item % 1 NoDays openI 1
OldestOpenItem > Days oldestItem 0
now my question is if i make any changes in any open sales order or partial deliverd order or being processed sales orders..
system is not showing impact in variation of sales value or credit exposure value in FD32.
plz advise , how to solve this issue?
Thanks in Advance..
MkHiii
in Transaction OVA8, there is one option there under Released document still unchecked "Number of Days" make it 0.
Hope it will solve your problem.
Regards
Shambhu Sarkar -
Letter of Guarantee Value not Updating with Payments
Dear Expert
The requirement from the user is that when a payment is made , the system should deduct the amount paid and refresh the new available value for the customer.
For Example : A Financial document is created with 1000 value . And Sales order created for 8000 . Therefore now the open value is 2000. This means that the customer can order goods worth 2000 only.
In the meanwhile the first order is delivered and billed . And the customer has paid 8000 when he received the bill. this means that now he has paid so he can now order more goods worth 8000.
but in the system it still shows open value as 2000 , although now that the customer has paid, it should be updated with the payments made so the value can be used by the customer that he had paid.
If any of you has any idea how to tackle this ( it works same way in credit management ) but not in financial documents.
we were thinking of another work around , i.e by closing the Financial document that has been paid and creating a new one by adding the remaining balance. i.e 2000+ 8000 , this way the customer can again use his value. but then how can we automate the system to alert the sales user that the payment has been made for a certain invoice for a certain LG.
your idea's and suggestion are highly welcome
Best regards,Dear ATGSD,
The functionality in GTS is designed for modelling of a single financial document for which the initial value is not updated.
I understand your user's requirement, but surely that is dealt with simply by setting a credit limit in the SAP ERP system? There should be no need to use the GTS functionality at all. In the ERP system, the credit limit is updated by the account payments, exactly as your user requires.
Please let us know if that would work, or if there are more detailed requirements that are not apparent from your post - thanks.
Regards,
Dave -
Dear all,
We have found that excise base value is not updated after creating excise invoices,later we corrected it,
excise base value started updating in table J_1IEXCDTL,
Intially for 2 months excise base value is not updated in table,
Is there any problem will arise in future ?
or
How to solve this issue ?
JeyakanthanAwaiting valuable replies.....
Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM -
Automatic Product Selection item value not updated in S067
Hello,
We have a requirement for Automatic product selection based on ATP with pricing at item level. This is working fine.
But the value of the subitem is not updated in open delivery value S067 after saving the delivery.
The item category is marked as credit active. update group is 15.
If i do main item pricing then the value is getting updated successfully.
I check several notes but nothing helped.
Pls. help.
Regards,
Praveenassigned it in sales order at item level in Billing tab
Assign the same at header level billing tab in sale order.
thanks
G. Lakshmipathi -
Open order value not updated in F.35
Hi
While using item category Tas ( Third party item ) in Sale order, it is not updated in open order value at F.35.
please give your suggestions. thanks.
Regards,
Tirumal.R1/ Check your credit control area settings
2/ Check your sales order config, if it works for one sales order type and not the other compare the two/ -
Invoice correction request (net value not updating)
Hi guys,
I have a problem when creating an Invoice correction request (RK).
When I change the Target quantity in the item (L2N), the Net value is not updated. So I have to go to Conditions and Carry out new pricing.
Any idea to fix this.
Best regards,
EduardoHi Eduardo
Check the copy control VTFA , what is the pricing type it is being used and what is the quantity field maintained -ve or +ve or kept blank .
Even Go to item data->conditions tab and click on analysis you will know the problem why it is not changing the gross price
Regards
Srinath -
Invoice value not updating for limit PO
Hi Experts,
SRM 5, SP 10 ECC 6.
Limit PO is created, invoice posted in ECC, the invoice vaue is not updating in the Statistics tab at item level of PO,Calculated Value is showing 0.00 only
any idea.
ThxHi David,
The problem is coming for limit order only, not for normal order and bbp_get_status is running fine for confirmation and normal po, so no need to run again
Maybe you are looking for
-
I just updated my iPhone and would like to change the color of the bubble for the text reply. Mine is now GRAY and it is much more difficult to read. The outgoing text bubble is still blue. Can I do this?
-
Sales Order Error Message 'Product does not exist in system'
Hi Gurus, we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before). Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully. Becaus
-
Display of non-English letters in Web Analysis
Hi! I have Hyperion Web Analysis displaying "?" symbols instead of non-English letters in dimension aliases in reports. I would be very grateful for any hint on how to solve this problem! Edited by: user10129034 on 27.01.2010 1:19
-
Dynamic Parameter - Login Prompt
I created a command which has a paramenter in it. Crystal Reports automatically created the paramenter in the report. My problem is that when I run the report in infoview I am prompted for the database username and password. I have already set the da
-
How to count number of vehicles using image processing tools in LabVIEW
anyone can give me idea that how to do counting of vehicles using image processing tools