Releasing forecast to PP/DS directly from an infocube

Hi,
has anyone of you ever tried to release an forecast directly from an infocube (i.e. without using DP), is that possible? Maybe there is already a report?
Thanks in advance,
Niko

May we know what that report is? Did you try the transaction /SAPAPO/REL_TO_SNP - Release InfoProvider to Supply Network Planning (program /SAPAPO/RELEASE_CUBE_TO_SNP)?
Thanks.

Similar Messages

Error logs in job releases forecast from DP to SNP-"Matl does not exist"

Hi Everyone,
I am facing error logs in the batch job which releases forecast from DP to SNP
Forecast release job - Weekly - Through background job
Forecast category - FA
Error 1: - Characteristic combination appears on batch job log with an error that
"GMC does not exist " Even though it exist in R/3 and APO
All products with error message "Product does not exist" from do exist and have Forecast in Product View
Error 2: - Deleted KCC keep showing up on the Demand Forecast release job log as errors even though they are invalid KCC and were deleted previously. How do they get removed from error log so they don't get created again
Material does not exist on the APO Product Master, in R3 there is a delete flag and the MRP type is set to X1 ,it does not exist in the APO Product Master and does not exist in R3.
Request you to kindly provide any way forward which may be causing error logs of the job
Thanks in advance,
Mrigendra Sharma

Hi Mrigendra,
Please re-initialize the SNP planning area (program : /SAPAPO/TS_PAREA_INITIALIZE) and then check the consistency by executing the program: /SAPAPO/TS_LCM_CONS_CHECK. If you observe any inconsistency in the log/spool, then re-run the program: /SAPAPO/TS_LCM_CONS_CHECK to observe all green.
It is recommended to run the consistency program after any master data change. The initialization program should be run at least weekly.
Try transfering the data again from DP to SNP to see if the error reappear.
Hope this helps.
Regards,
Nawanit

Release forecast from DP to R/3

Hi Experts,
In DP, I have lowest periodicty is month but in R/3
What is the possible way to release forecast from DP to R/3 from Monthly to daily bucket?
Thanks in advance...
Thanks & Regards
Sujay

Hi Sujay,
Is it possible for you release from APO DP to SAP R/3 in monthly bucket and then disaggregate in daily buckets?
There is also a BADI in APO BADI /SAPAPO/SDP RELDATA , which can be checked for your requirement,
Regards
Datta

Retrieve XMLP documents directly from BLOB fields in E1; Tools Release 8.97

Hi,
I want to be able to retrieve XML Publisher reports (PDF, RTF, HTML) directly from the database BLOB fields in EnterpriseOne. Instead of making users manually save each report to get a soft-copy of the report, I wanted to be able to retrieve the reports from a BLOB field, create a new external file for it, and open the file with the related editor (MS Word, Adobe, IE, etc.).
We are on Oracle 10g, and I was able to get a file populated with some BLOB data for a particular RTF file. However, when I try to open the file in MS Word, all I get is junk.
Does anyone know if JDE stores these documents differently into BLOB fields than standard?
Here is the code I used using PL/SQL...
DECLARE
xmlstr BLOB;
warn VARCHAR2(400);
v_file Utl_File.file_type;
line_buf RAW(32767);
maxbufsize BINARY_INTEGER := 32767;
amount BINARY_INTEGER;
offset BINARY_INTEGER;
dir varchar2(50) := 'XMLP_DIR';
filename varchar2(50) := 'JPARK_TEST.rtf';
bsize NUMBER;
BEGIN
v_file := utl_file.fopen(dir,filename,'wb',maxbufsize);
SELECT xorpdxpblb INTO xmlstr FROM sy812.F95631 WHERE xorpdorgud = '2115630440008e-SMNQTWZCFI-YEKRWCIOUA';
--SELECT xdrpdubblb INTO xmlstr FROM sy812.F95630 WHERE xdrpduogud = '21080156900001-SMNQTWZCFI-ORORNYFSYJ';
bsize := dbms_lob.getLength(xmlstr);
dbms_output.put_line(bsize);
amount := maxbufsize;
offset := 1;
WHILE (offset<bsize) LOOP
DBMS_LOB.read(xmlstr,amount,offset,line_buf);
utl_file.put_raw(v_file,line_buf, TRUE);
offset := offset+amount;
--utl_file.fflush(v_file);
--Dbms_Output.put_line(offset);
END LOOP;
utl_file.fclose(v_file);
EXCEPTION
WHEN OTHERS THEN
UTL_FILE.FCLOSE_ALL;
DBMS_OUTPUT.PUT_LINE('WHEN OTHERS');
dbms_output.put_line(substr(sqlerrm,1,254));
END;

the database and blob fields are identical. In the 11i (eBusiness suite) we would store this information in fnd_lobs.
Ike Wiggins
http://bipublisher.blogspot.com

Does anyone else think the new iPhoto is not very good? you can no longer burn photo cd's directly from it!

I do not like the new iphoto, it will not let you burn a photo cd directly from iphoto like it used to. It use to be simple, now it's not. I also think the faces feature is a waste of time and you can't disable it. Overall i am not happy with this new product i had to pay for. I had to update the iphoto i loved because they stopped letting you send your photo's to be printed from it. Apple is failing. It seems they are more after new sorces of revenue then keeping a good product.

Did you have a question?
I don't use the Faces feature, nor the Places one either, but I don't find them a waste of time. There's nothing to disable, just don't use them. Burning to optical media is going the way of the floppy disk. New computers of every brand are showing up now without optical drives. In five years you'll have trouble finding a computer with a built-in drive to buy and in 10, you'll find it hard to get a drive that will play optical media at all. iPhoto 08 was released in 2007 and that means they supported online printing services for 6 years. The installed base of iPhoto 08 is so small now that it's not worth their while. How you get from your inconvenience to "Apple is failing" is not clear to me. iPhoto 11 is a much more capable application that 08, complete with full non-destructive editing.

Can i send email directly from bridge cs6 and cc ?

hi
can i send emails directly from bridge cs6 or cc directly from bridge?
i found this scripts http://kb2.adobe.com/community/publishing/894/cpsid_89450.html
but i run cs6 and cc under windows 7 sp1 64bit and windows 8.1 64bit
and i have thunderbird email client
is there a way to make it work?
maybe i can install another email client
thanks

// consult MAILSEND in here: https://github.com/muquit/mailsend and download the app 'mailsend.exe' for windows7 in here:
// https://github.com/muquit/mailsend/releases/download/1.17b15/mailsend1.17b15.exe.zip
// unzip it and put the app .exe where you want to use it.
// I have tested using Bridge to send e-mail using my gmail e-mail account and it works. I only needed to
// I needed to send e-mails from Bridge using my google account, but first I needed to put on my network the app 'mailsend.exe'(i'm using PCs windows7 , CS6 and a network)
// All my 20 people team is using it, so I decided to put the app 'mailsend.exe' on a common place on network. I you are using it only on 1 PC you don't need you can put it on its disk.
// Solution: All you need is to create a bat file that tells 'mailsend.exe' what to do:
var mailsendBat=File(Folder.temp +"/mailsendBat.bat"); // creates a bat file on the temporary folder
mailsendBat.open("w")
// the place where app 'mailsend.exe' file is
mailsendBat.writeln('"X:\\[someFolder]\\mailsend.exe" \^');
// my gmail
mailsendBat.writeln('-t [email protected] -f [email protected] \^');
// the title can have encoding or not (-enc-type "base64")
mailsendBat.writeln('-cs "utf-8" -mime-type "text/plain" -enc-type "base64" -sub "Ich lerne seit ungefähr zwei Jahren Deutsch" \^');
// this works for the smtp gmail
mailsendBat.writeln('-starttls -port 587 -auth -smtp smtp.gmail.com -user "[email protected]" -pass "[myPassword]" \^');
// If I want to send an image attachment I use this 1, 2, or more times. If content-type is "multipart/mixed" the inline images don't work. Instead the images will be sent as attachment.
mailsendBat.writeln('-content-type "multipart/mixed" -attach "C:\\Users\\Public\\imagens\\myImage.jpg" \^');
// this is the line to send a simple text line with no encoding specified
mailsendBat.writeln('-enc-type "none" -mime-type "text/plain" -M "one line attachment 1" \^');
// you can sen inline html that can also have links to inline images
mailsendBat.writeln('-mime-type "text/html" -enc-type "none" -M "<b>this is a test</b><br><img src="http://[any_online_image.jpg],image/jpeg,i">" \^');
// sending text line with special encoding
mailsendBat.writeln('-cs "utf-8" -mime-type "text/plain" -enc-type "base64" -M "Ich lerne seit ungefähr zwei Jahren Deutsch" \^');
// endind it
mailsendBat.close();
// executing
mailsendBat.execute();
// there are also other kind of commands (consult https://github.com/muquit/mailsend)

STO does not trigger forecast consumption unless re-releasing forecasts

Hi,
We need Scheduled Agreements, Customer Orders and STOs to consume forecast. While the first two work fine, the last one (STO) shows strange behavior. When an STO is created in R/3 and CIF-ed to APO, it does not consume forecast until we release forecasts from demand planning again. It is not only the Planning book where forecasts are not consumed, but tx /n/SAPAPO/RRP3 has the same values. Or, to be correct, there are some date differences, which are strange as well, but maybe have nothing to do with the original issue.
Thanks for the instructions in advance!

Hi John,
We have a similar requirements. We have build our own business rules for plant determination. Instead of specifying a plant per customer material, the delivering plant can be specified per product or product group and per ship-to, customers region or country. Thereby the rules are time dependent.
This logic is used in R/3 in sales order creation and in BW when demand is copied to an infocube containing plant. Finally it is also used in copy management in APO.
For us it is very important to have the same business rules in planning and operations.
Up till now we could not find a better solution.
grt
Jean

LR displays "no preview available" upon import direct from camera after last update. How do I fix this?

I have the latest LR update with Nikon D700 and import directly from camera. I purchased a new CF card in case the old one was the problem but I get the same thing with the new card. Is there a bug in the last update or is this a problem with my equipment?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Dialing direct from PDF

Hi guys,
We have just switched our fleet from iOS devices to Android devices and we are having a real issue with sending PDF's with phone numbers contained in them. With iOS, basically any number that fit the format would be recognised as a phone number and could be dialled directly from the app.
With the Android app I'm struggling to find a format that allows us to do this.
I've tried adding it as:
tel://00000000
tel://+00000000
+00000000
00000000
Unfortunately most of the guys create these PDF's using Word and then printing to PDF (using PDF creator) though they do have access to Acrobat Professional if it is required.
Any help is greatly appreciated!
Thanks
-Matt

Hi!
Adobe Reader on Android currently doesn't support this feature. We just support http links currently. We have taken note of your feature request and would try to address this in one of our future releases.
Thanks
Adobe Reader Team

How to make a CD Jacket and print out Song order directly from playlist

I was wondering if there was a way to make a CD Jacket with artwork from songs selected and also how to make a same size sheet to fit in the CD holder that has the exact song order and titles by printing out directly from your playlist.
I am not sure I worded that right but hopefully you will know what I mean.
Any help would be greatly appreciated.
Thanks

There is a pretty basic CD insert that you can print from iTunes, if I remember correctly it will print whatever artwork is attached to the first song in the playlist.
Open iTunes, highlight the playlist in question, go to File>Print and choose the CD Jewel Caser Insert radio button. Theres also a little Theme menu.
However you can get much more flexibility from a dedicated CD Cover program. I use Cover Star, it's inexpensive and makes good quality CD booklets, back covers and disc overlays. It will generated artwork for you or you can drag your own picture files to it. You can download a trial version from this link: http://autostylus.com/coverstar.html. It's fully functional apart from printing so you can play around with it and save the inserts until you decide if it's for you. Purchasing a license then releases the final function and anything you saved previously can be printed off.

I have just updated to LR5. I also have a new Camera. Nikon D800. Trying to import directly (from camera) into LR. But unsuccessful. Getting the following message. "The files are from a camera which is not recognised by the raw format support in Ligh

I have just updated to LR5. I also have a new Camera. Nikon D800. Trying to import directly (from camera) into LR. But unsuccessful. Getting the following message. "The files are from a camera which is not recognised by the raw format support in Lightroom." How can I import please?

Hi,
I assume you mean the Nikon D810 because D800/800E support has been there since Lightroom 4.1
Currently, because it is a new camera (D810) the only support is in a RC of ACR 8.6 for Photoshop CS6 and CC, as the RC runs out on 31 August it is expected support will be there in the next dot release of Lightroom.
Current limitations are that only full sized NEF is supported.
If you wish to import to Lightroom 5.5. you will need to download the DNG Converter v8.6RC and convert the NEF files (full size RAW ony) to DNG then import into Lightroom 5.5

Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?

Hi,
I have installed Oracle 11g database.
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I want to update the patch.
Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?
Is any impact on the database?
Kindly suggest,
Regards,
Sachin

11.2.0.4 is nothing but a patchset of 11.2.0.3, in-place upgrade is allowed :
http://docs.oracle.com/cd/E11882_01/server.112/e23633/preup.htm#UPGRD12370
"You cannot install the new software into the same location for Oracle home as your current release, unless you are installing an Oracle Database 11g patchset release. For a patchset release, you can use the same Oracle Database 11g Oracle home."
And since it's a patchset, a direct upgrade is ok.
Lastly, yes, every upgrade has an impact (e.g. perf.), it has to be tested.
Nicolas.

Has anybody coded the Release Forecast to APO UE - ZXDMUSERU17???

Transaction MC90 releases forecasts/demand plans from DP to SNP. This user exit ZXDMUSERU17 is supposed to allow me to affect the resulting orders on the RRP3 screen, but for the life of me I can't figure out how this is done.
I'm looking for code examples where somebody has done anything with the SCHEDULE_LINE_TAB table within this UE.
Shoot, I'd be happy to see ANYTHING that anybody has done with it.
Any helpful information would be awarded with points.
THANKS,
Chad

Figured this out on my own. UE's and BADI's were useless for what we needed. Debugged the MC90 program stack and found what we needed in an implicit enhancement to fill_schedule_tab.

It is better to buy direct from the producer!

For example: "the "Chronories" App is made by Synium. You can buy the APP in the AppStore or direct from Synium. If the APP is from the AppStore NO update is available. If it is from the producer direct, you have the updates for free. Today they have launched two. But my form the APPStore is still the old. Do we have two-class-clients? And APPStore clients are in the second class? I think so

Your experience is interesting because I bought another Synium product through the Mac App Store and also have received an update to it via the Store, reassuring me that the process works flawlessly and that all companies and developers should be capable of applying it.
Usually developers charge for 'major' releases (eg V1, V2, V3, etc) while 'dot' releases (eg V1.1, V1.2) are free to holders of the appropriate 'major' release (V1 in this example). Is it a 'major' or 'dot' release that you're questioning?
It is worth checking with Synium regarding your particular product and experience because my experience is that the process worked as it should, removing the need to go hunting for updates and making me feel 'first class' using the Store!

[iPhone development] How to load the App Store directly from an app?

I need to figure out how to load the app store from one of my applications by clicking a button. The code is relatively easy to load say a website. But when I use this code:
-(IBAction)goToAppStore;
[[UIApplication sharedApplication] openURL:[NSURL URLWithString:@"http://itunes.com/apps/appname"]];
it does not work, because it says too many redirects occurred.
Is there a way to load the app store (and load into a specific app info view) directly from the app, instead of loading a website to load the app store?
Thanks very much,
LOQ123

Thank you.
But I using the one line code I had too many redirects. So, I needed the latter code, which didn't load the app store until all the redirects have happened. Unfortunately I don't understand this code:
// Process a LinkShare/TradeDoubler/DGM URL to something iPhone can handle
- (void)openReferralURL:(NSURL *)referralURL {
NSURLConnection *conn = [[NSURLConnection alloc] initWithRequest:[NSURLRequest requestWithURL:referralURL] delegate:self startImmediately:YES];
[conn release];
// Save the most recent URL in case multiple redirects occur
// "iTunesURL" is an NSURL property in your class declaration
- (NSURLRequest *)connection:(NSURLConnection *)connection willSendRequest:(NSURLRequest *)request redirectResponse:(NSURLResponse *)response {
self.iTunesURL = [response URL];
return request;
// No more redirects; use the last URL saved
- (void)connectionDidFinishLoading:(NSURLConnection *)connection {
[[UIApplication sharedApplication] openURL:self.iTunesURL];
I'm know where to implement the code, however I don't know where to put my link in inside the specific code up above.
Please help me
Thanks very much

Releasing forecast to PP/DS directly from an infocube

Similar Messages

Maybe you are looking for