Releasing GR Blocked Stock to any unrestricted storage location

We have some stocks in non-valuated GR blocked stock which was posted from Purchase Order with movement type 103
Now, the decision is to dispose the material. We have dedicated scrap location in system. Before disposing physically the material need to be cleared from system under GR blocked stock, even though it does not appear in any storage location in SAP
Our Material Planning suggested that stores shall post release of GR blocked stock with movement type 104 so it will reverse the 103 movement previously, and clear the qty from system. But this in my opinion is against control viewpoint..i.e. stores should not use this way to clear system assigned stock to clear from system
My suggestion was to use the following steps :
1. MIGO>> Release GR blocked stock
2. Put Material Document number (while posting 103), material details, qty, other references will be retrieved automatically
3. The movement type is seen to be default as 105, change it to 910 (Release GR blocked stock for warehouse)
4. Change Stock type from QM inspection to Unrestricted
5. Assign Storage location to desired one (in my case I assigned SCRAP location)
5. Select Item OK indicator to activate
6. Check & Post
Since the item has PO reference, my question to my expert friends is that will the above release from GR blocked stock post qty only to SCRP location or will it post Qty + value ?????
I don't want Value to be posted to the scrap location.
If the above process to move the stock qty (only) from GR Blocked stock to Scrap is success, I can ask accounts to post adjustment to clear scrap qty by 702 movement type.
Thanks, Sunil

Just set this que is complete so no one will try to open

Similar Messages

  • Movement type 671 (copy) to blocked stock instead of unrestricted use

    Hello,
    I want to post the stock from a return delivery (created with reference to return line of a stock transport order) to blocked stock instead of unrestricted use stock.
    Standard SAP uses delivery item category NLRN (Return StockTransItm) and movement type 671 (TR to stock in transit).
    I want to do the same thing that movement type 671 does but post the GR to blocked stock.
    Any ideas,
    Best regards,
    Dominik

    Dear ,
    Normally the process for intercompany 'return' stock transfer is as               
    follows:                                                                               
    1) Create an intercompany stock transfer order with flag 'Return'                 
       (transaction ME21) or an item with the return flag (field RETPO)                                                                               
    2) Create a delivery with VL10B (or VL04)                                         
    Cross-company, delivery type NCR, item category NCRN                              
    Intra company, delivery type  NLR, item category NLRN                                                                               
    The delivery type will be assigned via Customizing IMG -> Materials               
    Management -> Purchasing -> Purchase Order -> Returns Order -> Store              
    Return                                                                               
    3) Create with the transaction MIGO a goods receipt from the receiving               
       plant (the plant that created the NB purchase order for return -                  
       therfore the quantity is negative) with movement type 101                         
       (this step is only necessary with the two-step procedure).                        
       The goods receipt will NOT be created with reference to the delivery,             
       that means, that the returns delivery will not be updated. In                     
       the system posts a goods issue with reference to the                              
       returns purchase order that is the system converts                                
       the movement type due to the returns indicator.                                   
       Cross company   161                                                               
       Intra company   161                                                               
       If the one-step procedure is used, step 3 needs not to be performed,              
       automatically posts the negative goods receipt when performing step 4             
       The quantity is then transferred to the transit stock.                                                                               
    4) Posting of goods issue via the delivery; Button 'Goods issue' -      
       starting with 4.6 the button is changed to 'Goods receipt'.                                                                               
    In background a goods receipt is performed                                                                               
    Cross company                                                        
       Two step procedure 673                                               
       One step procedure 675 (step 3 with mov.type 161 is automatically    
       posted)                                                                               
    Intracompany                                                         
       Two step procedure 671                                               
       One step procedure 677 (step 3 with mov.type 161 is automatically    
       automatically posted)                                                                               
    5) Create a credit for it                                                  
    6) and check this credit.                                                                               
    In the standard it is not foreseen that the returns of cross-company       
    stock transport orders arrive a blocked returns stock. As you found,       
    in Note 430074, the relevant movement types for this process are 671,673   
    675 and 677. As indicated in the documentation you have, these movement    
    types transfer returns into unrestricted-use stock. Therefore, if you      
    wish to place these particular returns in blocked stock, you will need     
    to perform another movement from unrestricted-use stock once the return    
    has been received as such.                                                                               
    I am sorry I can not provide a more satisfactory solution.

  • Release GR blocked stock 105 from 103 twice

    i received my stock to gr blocked stock 103 after that i want to release it partial with 105
    i want to release one 103 document to many 105 document (fi famous problem account  .problem is :line items which already released comes again is it possible when i release gr blocked stock  with reference to material document to retrieve unreleased line items only?

    Hi
    At my end system gives error if I try to released material document which is al;ready released before.

  • Release GR block stock

    Hi MM Consultants
    while releasing GR blocked stock (103 to 105) error is coming Item is not available for reference to excise invoice , deselect item. please tell me how can i resolve it.
    Regards
    Anubhav

    Hi Jeyakanthan
    thanks for your reply.
    i will capture excise invoice at the time of 105 (release GR block stock) posting ,
    i have reversed material doc , but problem is that when i am canceling excise invoice system is showing " Reverse the material document before cancelling the excise invoice. Message no. 4F147" .
    status of excise invoice showing IN PROCESS. and in this excise invoice total 6 material codes and system allowing only for 1st material code and throwing error for remaining material code
    Pls suggest me .
    Regards
    anubhav

  • Stock Transfer between 2 Storage locations

    Dear All
    I want to configure Stock Transfer between 2 Storage locations.
    I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
    Regards
    Vaibhav Mahajan
    Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

    Hi
    Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants  doc type UB), just goto MIGO
    There are 2 options are there for Stock Transfer between 2 Storage locations
    1. one step procedure movement type 311(from unrestricted to unrestricted)
                                                                   323(from quality to quality)
                                                                   325(from blocked to blocked)
    2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
    During this transfer no accounting document will generate because you are transferrring the stock within the plant,
    Thanks

  • Stock transfer between Plant/Storage location to Plant/Storage location

    Dear Experts,
    This is a MM component of SAP Retail.
    We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
    To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
    When we run replenishment  planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
    I do see the following set up in SPRO and I have done the following.
    Step1: Activate Stock Transfer between Storage Locations
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
    Step2: Assign Delivery Type and checking rule according to storage
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
    Step3: Define Shipping Data for Stock Transfer between Storage Locations
    SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations

    Step4: Define Rule for Determination off Shipping Point
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
    Step5: Shipping Point Assignment According to Storage Location
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
    Question.No:1- After completing the above set up  in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
    Question.No:2
    I do see the following setting.
    Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
    Display the IMPLEMENTATION
    Double click on the method GET_SUPPLYING_SL
    Click the Execute button
    Click the detail button on IF_EX_MD_EXT_SUP
    Execute GET_SUPPLYING_SL
    There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
    Kindly provide your inputs.
    Thanks,
    Vasanthan

    Dear,
    Have You configure MRP in second plant (where you want to transport the Material).
    Please try with this and do again Po for stock transport.
    Regards
    Piyush Patel

  • Can we block a material for particular storage location ?

    We can allow material to storage locations by MMSC. Can we block a material for particular storage location ?
    Please share ur view.

    Hi,
    If you want a material to be blocked, go to the Basic data 1 view of the material,there in the genral data you have " X-plant material status ". Also in Cost estimate 1 view of the material you have Plant Specific Material status. Use the options available to block the material in these two views.
    Also u can goto MM06 where put material,plant,storage location.When u select enter just tick the check box of material,plant and storage location and save it.
    Pls reward if found useful.
    Regards,
    Indranil
    Message was edited by:
            INDRANIL BHATTACHARYYA

  • Stock determination finds deleted storage location

    Hello gurus,
    we are using stock determination in MIGO for goods receipts to automatically determine the correct storage location for delivered goods.
    Now we deleted one storage location and moved all materials stored there to another one.
    But still, for certain materials, the stock determination gives the old location. Then, when we try to post the receipt, there is (of course) an error because the storage location has been deleted.
    We use only one very simple stock determination strategy with just one item:
    Special stock indicator: F (unrestricted-use stock)
    Priority indicator: 1
    Any ideas, why the old location could be found?
    Thanks
    Alicia

    Hi Jürgen,
    no, I did not remove that item, because it was not even there in the first place.
    As I wrote in my OP, there is only one item with
    Special stock indicator: F (unrestricted-use stock)
    Priority indicator: 1
    The storage location is blank!
    I never used stock determination before and I know it is normally used for goods issue only, but in this system, there definately is an button called "stock determination" in MIGO for goods receipts. And when I click on it, the system determines a storage location where the material is stored. This works perfectly, except for the materials with blocked locations.
    Alicia

  • Stock report based on stock type with a storage location

    Is there a standard SAP report that will give me the stock information based on the storage location and stock type (unrestricted, QI, blocked, etc?)...for instance if I want to find all QI stock in a certain plant/storage location?  I want it to show a list of materials and their quantities, not on an individual basis as in MMBE.
    Thanks!

    Thanks again for your response.  I've used your last mentioned method before but with MMBE you have to enter a material number.  We want a report of all materials in a particular stock type.
    I was able to achieve this by goign to MB52 and setting up a filter on a layout.  My users can now select that filter on the selection screen to get the desired result.
    Thanks again for you attempts to help!

  • Stock on posting date -storage location and batch wise

    Dear All
    I need to developa report exactly same as MB5B but with storage location and batch wise.
    We need  storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
    I have gone through some history tables like MCHBH and MBEWH.
    But all the history tables are having fileds for period wise but not date wise.
    Any focus on this?

    You have to read the coding of MB5B to see how SAP is doing it.
    The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

  • Inspected stock posting to multiple storage location without batch

    Hi,
    At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
    Quick response will be appreciated.
    Anandkumar KS

    The scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
    A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use.  You obviously aren't using the 553 movement type as that writes off the material.  That could give you two lines to use for your scraping.  I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today.  If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
    Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
    You can also change the displayed names of the stock posting lines.  That's explained in the config file as well.
    Craig

  • Downlading Material stocks and its Value, storage location wise

    Dear Experts,
    As we are reimplementing SAP, we need to download the
    a)     stocks Plant and storage location wise for all the materials. Bcoz stocks are maintained in different storage locations.
    b)     Value of stocks for each material in the Plant and storage location wise, Bcoz stock qty will be different in different location and hence the value will be dependent upon the qty ?
    How can we extract this ? From which tables do we need to extract  this ?
    Can any one guide on this ?
    Regards     
    Javeed Ahamed.

    Goto MB52 report ,change the layout asper your requirement and extract to excel.To extract follow this
    go to menu bar
    system-- list-- save -- local file
    alternatively you can take it MBEW table also(se16n)

  • Stock Transport order issueing storage location determination

    Folks,
    In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
    Regards,
    MdZ

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • Stock transport order between storage locations and assignment category type E not in MRP

    Hello Gurus,
    I have a stock transport order between 2 storage location which belongs to the same plant. Besides the stock transport order is allocated to a sales order (account assigment category E). When I run the MD03, the system take into account the quantity of the stock transport order as a future entry and this is wrong. I need that the MRP has not into account the stock transport order as an entry.
    As an important information, If I modify the stock transport order removing the account asignment category E (sales order), then the MRP doesn't take into account it, so this is correct.
    Could anybody tell me how to get it?
    Thanks in advanced.

    Laura,
    It is normal that MRP will consider an STO as a receipt element; this is basic planning.  It is unclear to me why you think you do not want it to do so, but I will assume you have some logical reason.
    Contrary to what some others may have suggested, changing the scope of check for availability checking has no effect on which elements are considered for MRP.  MRP is a completely separate functionality from Availability Check.
    For Location > Location STOs (within a plant), then, you normally have the receipt element of the STO in the destination storage location, and the requirements element of an equal amount in the source storage location.  Net of these two elements is zero, unless you have already issued the STO at the source location.
    Changing the Account assignment from "E" means that the STO will not be relevant for your Sales order (in other words, when you receive this STO into the destination storage location, it cannot be used for your sales order).  In a general MTO scenario, it also means that the proceeds of this STO (the stock you received) cannot be used for ANY sales orders.
    One way that some people make an STO 'not relevant' for MRP is to alter the destination storage location such that it is not relevant for MRP.  You can change the MRP relevancy of the storage location in MM02 > MRP4 tab
    Best Regards,
    DB49

  • Stock valuation down to Storage location level

    Dear all,
    System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
    Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
    For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
    Could you please comment if there are tables store these data? Kindly comment.

    Hi Afshad Irani,
    Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
    My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
    Could you please advice further?

Maybe you are looking for