Releasing standard network automatically when integrated in released proj.

Hi Guys,
I am facing the following problem:
In the PS module we have created several Def/WBS standard structures with NW and activities.
Once we have copied the standard template in a new operative structure, we add some new standard networks and rebuild the structure in order to fulfil the new operative project needs. Once done we release the project definition in order to release all objects in the projects, i.e. WBS, Networks, activities and material.
For some reasons and after the releasing phase we have to had new standard networks somewhere in the project structure on WBS level.
The problem we face then is that the new network and all the related activities do not get the release status as all other objects but still remain in the open status. How is it possible to set automatically the release status in the new network, as far as the project definition is released?
Thank in advance for your precious inputs/solutions.
Best regards

Hi Pierre,
Check the option in OPSC to release the networks immediately after the creation. This will release the networks as soon as they are created.
Hope this helps you.
Regards
K Ramaiah

Similar Messages

Assignement of Material componets in standard network

Hi,
What is meant by assignement of material componets by Material BOM and By Standard BOM in the standard network and when to use the same.
Rgds,
Prasad

Hi,
The only way to assign materials to an activity of a standard network is via a BOM. When linking a BOM to thehe activity, the items of the BOM are automatically assigned to the activity.
You can link a material master BOM, but you can also link a kind of dummy BOM (standard BOM). The standard BOM is especially created for a particular assignment. When creating the standard BOM starting from the standard network you will see that a BOM is created with a header that has a reference to the standard network number (this is the standard object). There exist no master data record for the standard object.
Regards,
Paul

Why is it that when i upgraded to ios 6, my ipad 2 no longer connects to known networks automatically

why is it that when i upgraded to ios 6, my ipad 2 no longer connects to known networks automatically?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How can java programs execute automatically when it connects to network

Good Day dears...
How can java programs execute automatically when it connects to network.
Thanks in Advance friends Shackir

884924 wrote:
Good Day dears...
How can java programs execute automatically when it connects to network.What is "it"? That is, execute when what connects to the network?
Your computer? If that's what you mean, this is not a Java question. It's an OS operational/administrative question. Executing any program, whether written in Java or not, based on some system event has to do with that system, not with the program. If it's possible to do this, you'd do it exactly the same way for a Java program as you would for any other program.
Or is "it" the program itself? If this is what you mean, then it's a nonsensical question. For the program to connect to the network and detect that it has connected to the network, it must already be executing, so asking how to execute it at that point is meaningless.
Finally, I'll point out that "connecting to the network" is a pretty meaningless phrase. Or rather, it has so many potentially valid meanings that it's impossible to know which one you're referring to when you use that phrase. And I'd be willing to bet you don't have a clear picture of that yourself.

HT1222 Hi Does anyone know how can I stop my iPhone 4s downloading automatic system update so reducing my network speed when plugged in to charge or connected to the pc ??? I'm really ok with my iOS 5.0.1 and I don't need 5.1

Hi Does anyone know how can I stop my iPhone 4s downloading automatic system update so reducing my network speed when plugged in to charge or connected to the pc ??? I'm really ok with my iOS 5.0.1 and I don't need 5.1

Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Standard network not creating project and WBS automatically

Hi,
I have a standard network with a standard WBS assignment at BOTH header and activity levels.
I created a link to a material in CN08 with this standard network.
Assembly processing has been configured.
When creating a sales order, entering the material... the network create screen appears and the system requests a WBS element.
At this point the system should have created the WBS element.
When I insert an existing active WBS element as a test..., the system message indicates that the network is already assigned to a Std WBS element.
Why is the system not using this assignment to create a project and WBS element form the standard structure?
Thanks

Hi,
As a test...
I've removed the linking of the material and standard network in CN08 - and the system now displayed a screen asking for standard network details.
I create the material and standard network link again in CN08 - and I'm back to the original issue of the network create screen appearing, but the WBS field is blank. The system is not generating the WBS.
So - the system is recognizing the link of the material entered in the sales order and the standard network via CN08. But its not using the Standard WBS used in the standard network AND CN08 setup....
Note: The Std WBS has the planning and billing indicator ticked.
Once again, when creating the sales order, I get the network create screen asking for a WBS element. If I insert an existing WBS element I get the message below. The issue is - I know the standard WBS assignment exists, why isn't the system generating a new operative WBS at this point?
An assignment to a standard WBS element already exists
Message no. CN044
Diagnosis
You have created a network by copying from a standard network. The standard network is assigned to a standard WBS.
However, at the same time, you have made your own assignments to WBS elements.
System Response
When you manually make assignments to WBS elements, the system does not necessarily take the asignments in the standard stuctures into account.
Procedure
When you call up the function replace standard WBS or when you save the network you decide whether the manually created WBS assignments or those fronm the standard structures are copied.

Safari starts automatically when restarting (Snow Leopard)

Two days ago, Safari began to start automatically when restarting the system (iMac, Snow Leopard). I checked in Accounts>Login Item and it doesn't appear there. I also right-clicked the icon in the dock and the option to open when starting session was disabled.
¿Anyone knows how to solve it?
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, launch the application(s) and test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

How to create and use templete or standard network / activity and wbs

dear
i have define the structure for my project which have WBS elements, network and activties. the strucutre is same for all the projects that i define.
i wanna know whether to use templete or standard wbs network and activities as templete for the project.
for a network there are almost 150 activties across 10 wbs elements i want this structure as a templete what can i do create it.
Further, how can i use LSMW to create relationship for ativities?
regards
saqib usman

I have create std wbs level 1 5 wbs further i create std nwrk and activities and assignMENT are as follows
h1.*Create std wbs from CJ91 *
STD DEFINITION IS
E00-BSS-CO-BTS-0000              STANDARD BTS
LEVEL 1 WBS ELEMENTS
E00.BSS.CO.BTS.0000.RFP     RADIO FREQUENCY PLANNING
E00.BSS.CO.BTS.0000.SA     SITE ACQUISITION
E00.BSS.CO.BTS.0000.TXN     TRANSMISSION
E00.BSS.CO.BTS.0000.CW     CIVIL WORKS
E00.BSS.CO.BTS.0000.PMO     PMO
RELEASE THE STD PROJECT OPTIONAL BY EDIT > STATUS > RELEASE
h1.CREATE STD NETWORK FORM "CN01" tcode
NEWORK HEADER WITH FOLLOWING SETTING
9000000    STD NETWORK CORPORATE BTS 0001
Network usage     UNIVERSAL
Planner group   1      1
Network status     RELEASE (GENERAL)
Std.WBS element     E00.BSS.CO.BTS.0000.BSS
Predefined plnt      CO01
press activity overview button or (shiFt+F7)
I ASSIGN ACTIVITY TO STD WBS ELEMENTS
ACTIVITY    OPR. SHORT DESC STD WBS ELEMENT
A01            ZERO VERIFICATION   E00.BSS.CO.BTS.0000.RFP
A02            DESIGN DOCUMENT   E00.BSS.CO.BTS.0000.RFP
B01            SITE SURVEY 1          E00.BSS.CO.BTS.0000.SA
B02            SITE SURVEY 2          E00.BSS.CO.BTS.0000.SA
C01            CIR Doc Input              E00.BSS.CO.BTS.0000.CW
C02            CIR CW Input by RM    E00.BSS.CO.BTS.0000.CW
D01            CIR Doc Input              E00.BSS.CO.BTS.0000.TXN
D02            CIR TXN Input by RM    E00.BSS.CO.BTS.0000.TXN
E01            Rollout Month               E00.BSS.CO.BTS.0000.PMO
E02            ON Air Date                 E00.BSS.CO.BTS.0000.PMO
h1.PREREQUISITE FOR ASSIGNMENT OF STD NETWORK and WBS are:
PROCESS TRANSACTION "CJ20N" TO INCLUDE STD NETWORK ALONG WITH ASSIGNED ACTIVITIES AND STD WBS.
FURTHER, I WANT TO COPY STD NTWORK SEVERAL TIMES with different network number. EACH TIME I COPY STD NWK TO OPERATIVE STRUCTURE THE SYSTEM SHOULD PROMPT NEW NUMBER FOR NETWORK AND ALSO PROMPT TO ENER ASSIGNED STD WBS ELEMENTS WITH REPLACE OPTION for operative WBS NUMBER.
STANDARD WBS                                               OPERATIVE WBS
E00.BSS.CO.BTS.0000.RFP     REPLACE BY     E00.BSS.CO.BTS.0003.RFP
E00.BSS.CO.BTS.0000.SA     REPLACE BY     E00.BSS.CO.BTS.0003.SA
E00.BSS.CO.BTS.0000.TXN     REPLACE BY     E00.BSS.CO.BTS.0003.TXN
E00.BSS.CO.BTS.0000.CW     REPLACE BY     E00.BSS.CO.BTS.0003.CW
E00.BSS.CO.BTS.0000.PMO     REPLACE BY     E00.BSS.CO.BTS.0003.PMO
IN MY OPERATIVE STRUCTURE
I HAVE TWO LEVEL FOR WBS I.E.:
E00.C0.BSS            LEVEL 1
     E00.BSS.CO.BTS.0001    LEVEL 2    ASSIGNED NWK 0001 WITH ACTIVITIES AND WBS
     E00.BSS.CO.BTS.0002    LEVEL 2    ASSIGNED NWK 0001 WITH ACTIVITIES AND WBS
     E00.BSS.CO.BTS.0003    LEVEL 2    WHERE I WANT TO ASSIGN STD NWK AND WBS
                                                              (I HAVE CREATED EXTERNAL NUMBER FOR NETWORK)
I GO TO THE TEMPLETE AREA AND CLICK ON STD NETWORK BUTTON AND DRAG STD NETWORK 09000001-1 TO E00.BSS.CO.BTS.0003. ENTER NAME FOR NETWORK "BTS 0003". SYSTEM PROMPT TO ENTER EXTERNAL NETWORK NUMBER I.E.
Enter network number
WBS elem:E00.BSS.CO.BTS.0003
Copy from network:
E00-BTS-0003
h1.CLICK CONTINUE BUTTON NOW REAL PROBLUM COMES A DIALOG BOX APPEARS
Include standard network
You want to include a standard network that has assignments to standard WBS elements. However, the selected WBS element does not correspond to the standard WBS element.
               Copy Assignment                            Ignore Assignment
In case, if i select button Copy assignment or select Ignore Assignment then:
New network created E00-BTS-0003 under WBS     E00.BSS.CO.BTS.0003 with all assigned activitites but no WBS elements i.e.
STANDARD WBS                                               OPERATIVE WBS
E00.BSS.CO.BTS.0000.RFP     REPLACE BY     E00.BSS.CO.BTS.0003.RFP
E00.BSS.CO.BTS.0000.SA     REPLACE BY     E00.BSS.CO.BTS.0003.SA
E00.BSS.CO.BTS.0000.TXN     REPLACE BY     E00.BSS.CO.BTS.0003.TXN
E00.BSS.CO.BTS.0000.CW     REPLACE BY     E00.BSS.CO.BTS.0003.CW
E00.BSS.CO.BTS.0000.PMO     REPLACE BY     E00.BSS.CO.BTS.0003.PMO
After all my finding i am not able to bring activity assigned WBS elements. Kindly help and provide information to resolve the problum.

How to send e-mail notification automatically when a record is inserted?

Dear All,
Could anyone kindly tell me how to send e-mail notification automatically when a record is inserted through a form in Oracle Portal Release 2?
Regards,
Ridwan.

Hi,
If you are writing a form on a table then you can call the mail API from a database trigger on the table. If it is a form on a procedure, you can make the email call from the procedure. To know more about sending mails from plsql go to
http://www.quest-pipelines.com/newsletter-v2/smtp.htm
Thanks,
Sharmila

How do I stop the task panes from opening automatically when I open a PDF?

How do I stop the task panes from opening automatically when I open a PDF?
When I open some of my PDFs the task panes open too. I do not want them to as I have never used them in reader for any purpose. I use reader to READ PDFs. I don't need the task panes and don't want them opening when reader starts.

Adobe seem to have decided that they are so important that you must see them. Perhaps because it is their chance to sell you stuff. It seems to vary between releases, are you on the latest? Curiously, many people have no idea how to open and close these panels.

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

Suggest that you perform a Factory Default Reset as follows:
Pull the Express from power
Wait a few moments
Hold in the reset button and keep holding it an additonal 8-10 seconds while you plug the Express back in to power
Release the reset button and allow 40-45 seconds for the Express to restart
Apple's instructions to do what you want are here:
It will often help to temporarily connect an Ethernet cable from your Mac to the AirPort Express for the setup. Once the Express is configured, you can disconnect the Ethernet cable and move the Express to the desired location.
http://support.apple.com/kb/HT4259
Although an AirPort Extreme is shown as the extending device in the example, the setup for an AirPort Express is exactly the same

How can i stop firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages

How can i stop Firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages
i use Firefox 22.0 on windows 7
it's about one week that it ask for "Network Connections" when i'm offline and disconnected from the internet even when i don't open a save page and just opening Firefox with a blank page
Image of the Error:
http://home.sums.ac.ir/~rowshansh/firefox.png
http://www.sums.ac.ir/~rowshansh/firefox.png

Did you check the network setting?
Sounds that you have set to connect automatically when a connection is not available.
*http://kb.mozillazine.org/Autoconnect
*http://kb.mozillazine.org/Browser_attempts_to_connect_when_already_connected

Bluetooth no longer loads automatically when the computer starts

I have the Bluetooth Stack version 2.01.21.1. It was working fine. When the laptop booted up, the bluetooth mouse was automatically connected.
All of a sudden the icon no longer appears automatically in the system tray and so I have to manually connect the mouse each time
It is still listed in the startup menu on the desktop and it is still checked in startup in the msconfig.
How do I fix this?
Thanks in advance

I have just gotten off the phone with a microsoft tech who actually seems to have fixed this somewhat
He went to start/run to get to services.msc.
He chose "SSDP Discovery Services" which "enables discovery of
UPnP devices on your home network" and DISABLED it.
Go figure
The BT icon now appears in my system tray and starts up automatically when the computer starts.
I say somewhat because It still disconnects if left idle for a long period, which it did not do previously, but at least it is there when I log on.
I want to mention that I have a Dell, not a Toshiba (did not realize this forum was for Toshiba laptops rather than Toshiba software) but perhaps
you will find this information useful.
Also, at http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx you will find an autorun tool that lets you fix what is or is not
in the startup menus. It seems to work better than using msconfig which on my laptop was not making a difference as to what started up and what did not.
It is meant for IT professionals so I would not mess with it too much. However if you just check or uncheck in the startups for the BT manager you will
not do any damage.

How i can export and distribute setting; network.automatic-ntlm-auth.trusted-uris" to all computers in the network (With Folder Rederiction enabled)?

Hi,
We are about to enable SSO in our environment. As a result, I need to modify the value for user_pref("network.automatic-ntlm-auth.trusted-uris", "my domain");>>prefs.js.
I created a simple .bat file to make the necessary mod and add the line to pref.js. When I run the file it outputs the prefs.js to the same location, not the Mozilla AppData folder. We are a Win7 environment with folder redirection enabled. Therefore, our user's Mozilla AppData folder is located at \\my domain\dfs\XenDesktop\Profiles\username\AppData\Mozilla\Firefox\Profiles\default (random default profile name). My question is what is the best course of action to add this pref. to all PC user's pref.js file? keep in mind the pref.js is located on the hidden network path I included above. I apologize if my question is not easy to understand.

cor-el, thanks for you reply.
Yesterday, prior to my post, I did try the mozilla.cfg method. I read your reply to another FF user's, similar question. Here are my complete steps.
1. created a txt file with the following info: defaultPref("network.automatic-ntlm-auth.trusted-uris", "ngs.org"); // set new default value
2. saved the file as mozilla.cfg
3. dropped the file in C:\Program Files (x86)\Mozilla Firefox
4. Created local-settings.js with the following info:
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
5. dropped the file in C:\Program Files (x86)\Mozilla Firefox\defaults\pref
When I launch Firefox the network.automatic-ntlm-auth.trusted-uris should say ngs.org, but the value is still blank.
Any help is greatly appreciated.

How do I make the plugin run automatically when a photo is imported?

I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
How do I make the plugin run automatically when a photo is imported?
Thanks for your help!
Regards,
Prosenjit

psaha84 wrote:
What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
psaha84 wrote:
How do I save the custom metadata with the image file?
Lightroom 5 has the limitation, plugin cannot link the custom metadata fields to XMP file or save them with image file.
So, is there any alternative way to save the custom metadata?
Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
Good luck,
Rob

Releasing standard network automatically when integrated in released proj.

Similar Messages

Maybe you are looking for