Releasing Transport Request Error.

Hi all,
I have created the Query Objects under a Transport Request in Development System and has to be transported to the QA system.
One thing i have observed is, when u create a Transport request for an Object.
Two Transport Requests will be created,
For Example,
If "A" object is assigned a new transport request 1, two Requests will be assigned to this Object "A".
Those requests would be 1 and 2.
But here 1 request is empty and 2 request is holding the Object "A".
So while transporting the request 2, even since 1 is assigned to the object, even it should be transported,
but im gettin the following message as below and hence the Transport cannot be done,
"Task 1(TR 1) is unclassified and does not contain any objects,
As soon as you include objects in the task/request, the SAP system automatically assigns a type to the task"
So can any1 plz help me out what was the error and my next steps to be followed.
Thanks,
Sowrabh

Sowrabh,
It's like creating Task under one perticular Request no...
Go to RSA1-Transport comnnection _ Drag the query you are intended to transport and check whether all objects are under same request..If not change the Owner of the object to you userid and then try to create a request..
Cheer's
HVr.

Similar Messages

  • Error while releasing transport request

    Hi,
    When i tried to release the transport request, it returning with code = 8 (error) so transport has not done. When I digged into the transport request, error message is
    'unimplemented function REPC_OR_DELETE DOCUMENTATION'.
    Thanks in advance.
    Arvind...

    Hi,
    This is more related to the BASIS side,
    still have found one solution in one of the thread. Still contact you BASIS administrator for it.
    Solution.
    Is the error pointing at TP or R3trans?
    In this phase, we get error coz of r3trans.
    Please try following the note 206168. which tells you to change the r3trans.
    If you have changed the r3trans earlier, then try using the same r3trans as provided in the kernel CD.
    Jayant Sahu

  • Unable to release transport request because of control program tp

    I have create a customized transaction type as a copy of urgent correction SDHF. I am not able to release the transport requests using the action in the toolbox 'Release Transport Request' and I obtain the following error in the log:
    could not start transport control program tp
    But if I directly execute the task 'Release Transport Request' in the task list, it works.
    Another strange thing is that at the beginning both ways worked, but after some days I started to have this problem.
    Thanks
    Antonello

    I did not find any note about this error.
    Someone can help me?
    Thanks.
    Antonello

  • Urgent Correction: Release transport request (transport is red)

    Hello!
    Has some one experience to solve the problem bellow:
    By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
    If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
    AGR_1016 table class is 'C'. Entries are only imported to client '000'.
    AGR_1016B table class is 'C'. Entries are only imported to client '000'.
    AGR_PROF table class is 'C'. Entries are only imported to client '000'.
    AGR_USERT table class is 'C'. Entries are only imported to client '000'.
    AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
    Main import
    End date and time : 20071115141115
    Ended with return code:  ===> 8 <===
    The question is:
    I would like to copy some existing role to  cutomer's namespace Z... save the rolle and transport the role via CharM.
    Is it usual to get the error I get?
    Thank you very much!
    regards
    Thom

    Hi Liza:
    You cannot delete released transport requests.
    Don't import them into QAS or PROD.
    If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
    As you know if you released a request, you can ignore it without moving it anywhere.
    Ram Chamarty
    Message was edited by: Ram Chamarty

  • Is it is possible to delete released transport requests...

    Hi Experts,
    I had created transport request and it is released, moved to quality with errors. I dont know why I am getting errors while transporting the request, Now I am creating another transport request. Is it any possibility to delete released transport request or is there any solution for this. why I am getting errors while transporting from dev to quality.
    Thanks & Regards,
    RAJ

    HI,
    Its not possible to delete the released transport request. You should have to follow transport procedure .
    T-code for Transport Connection- Check in SE09/se10 for creating requests.
    For collecting objects you have go Transport connection without missing the objects.
    SE03 for checking the Request objects.
    Go to transport connection in RSA1 Select u r Data target or report what ever it may be in development sys & select only necessary objectsu2026 click on transport optionu2026u2026it will ask the transport request create new req. go to SE-9 release the objectu2026go to STMS import u2026RELEASE The objects in quality sysu2026same procedure to production sys.
    Thanks
    sudhakar.

  • Database tables holding details for a non - released transport request

    Dear All,
    We are implementing SAP ECC 6.0 u2013 ABAP stack, on IBM iSeries / System i, i5/OS V5R4 -
    SAP kernel release 7.00, kernel patch number 173
    Could someone please guide me to the database tables holding the details for a non u2013 released transport request.
    The problem is the following :
    We encountered some data corruption in the database of our development system, so we did a restore from the previous day's backup (RSTLIB  command) for the database library : R3DEVDATA, without restoring the /usr/sap/trans  directory, then we did an APYJRNCHG command for the journal receiver spanning from the previous day's backup until the corruption time (remote journal on a remote system.)
    We are now facing the following conflict :
    One of our programmers is now un-capable of updating an ABAP program, which he previously added in a transport request, which he did not release.
    ( This was done during the day of the data corruption)
    When the programmer is trying to update the ABAP program through the ABAP workbench, he receives the error :
    'Request lock on non u2013 existent task / request DEVK921426'
    No details for the transport request DEVK921426 exist in either of the two directories :
    /usr/sap/trans/data   , /usr/sap/trans/cofiles
    The way I see to solve this conflict (eliminate this lock) is to delete the different entries related to the un-released transport request from the database tables.
    Any clues would be highly appreciated.
    Thank you in advance for your cooperation.
    Best regards.
    Reda Khalifa

    Dear Volker,
    Thank you very much for your interest.
    The transport request of interest did not appear in transaction code SE03
    Eliminating the record from table TLOCK indeed did solve the problem.
    Thank you again.
    Best regards.
    Reda Khalifa

  • Releasing Transport Requests

    Hi,
       I want to release trasport requests weekly once,guide me for the same.
    Thanku

    Hi Harshit,
    Releasing a transport request automatically is not a recommended practice .
    It can lead to number of errors and inconsistencies .
    Who will monitor the logs or may be developer want to add some more stuff in same TR.
    So there should be no suggestion  like releasing transport request automatically from consultant end.
    Still if you need you can get some idea from here
    Re: Automatic Release of Transport Request: By ABAP Program
    Regards,
    Gagan Deep Kaushal

  • Releasing transport request taking long time

    Hi All,
    I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
    In SM50, i didn't find any processes running.
    Can anyone tell me the solution.
    Thanks & Regards
    Uday

    Hi Uday,
    >> I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
    You didn't note what release your are running on, but you can check the note 1541334 - Database connect takes two minutes
    >> In SM50, i didn't find any processes running.
    It is normal, because the system exports the transport request by "tp" command at the OS level, after TMS complete its job on a DIALOG wp.
    Best regards,
    Orkun Gedik

  • Problem of calling BAPI to release transport request

    Dear Friends,
    I want to automatically release Transport Request using BAPI (BAPI_CTREQUEST_RELEASE), but I met a difficult during the process that only TR TYPE 'K'or 'W' can be release using this BAPI, if I create an addon program which TR Type is 'S' (stand for Development/Correction), then this BAPI does not work. 
    BTW, you can refer table E070.
    Could you please kindly give me some idea to solve this problem?
    Thank you in advance.
    Best regards,
    Nick

    Dear Li Nick,
    The reason that you cannot release a request of type 'S' is that type 'S' names a local correction, which cannot not be transported (and therefore of course not released).
    Regards, Tino

  • PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

    Dear all,
    I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
    I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
    Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
    Helpful contribution will be duly rewarded.
    Thanks & Regards,
    VICKY

    hi
    vicky just went through your Query regarding release
    of requests..first of all U be sure of TMS configuration
    see whether it is consistent or not.then after Refresh
    the system and then come to release of requests.
    its true that we can transport through scc1 but first
    check about STMS configuration and the way you set
    that.
    Regards
    manjula.

  • Releasing transport requests with job roles take forever after upgrading to Netweaver 7

    Dear experts,
    Some time ago we've out SAP ECC 5 system to ECC 6. Since then, it takes a very long time to release transport requests containing job roles.
    For example, a request containing 154 job roles (1 template and 153 derived roles) took 4 hours to release in our DEV system. Before the upgrade this only took a couple of minutes.
    Afterwards, the import in our QAS and PRD system don't take longer than normal.
    Apparently this time is taken by the Export phase:
    Checks at Operating System Level   
    17.04.2014 09:50:03
    (0) Successfully Completed
    Pre-Export Methods                 
    17.04.2014 09:50:37
    (0) Successfully Completed
    Export                             
    17.04.2014 13:51:02
    (0) Successfully Completed
    Does anyone know what causes this and how to solve?
    Kind regards,
    Nicolas

    Hello Nicolas,
    What I understood from your description is that ,it takes very long time to release the job. Once it is released, execution does not take much time.
    To me it seems to be background job/work process issue. Maybe all the background work process are busy to execute current jobs and no free work process available for the jobs which are in the queue. In that case, if possible try to increase number of bg work processes.
    Check for any performance issues during that period. Check if there is any locking issue and jobs are stuck because of that.
    Hope this helps to investigate the issue
    Regards,
    Archana

  • Creation date for released transport request

    Hello everybody!
    Does anyone know how to find the CREATION date for a released transport request? I've already checked table E070CREATE and it only has entries for modifiable requests.
    Best regards,
    Luís Andrade.

    I think transport is released date field in E070 is overwritten with the releasing date.
    a®

  • Delete Release transport request

    Hi Gurus,
    I need to delete a transport request which is already release. Please let me know what is the best way to do that.
    Thanks
    Liza

    Hi Liza:
    You cannot delete released transport requests.
    Don't import them into QAS or PROD.
    If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
    As you know if you released a request, you can ignore it without moving it anywhere.
    Ram Chamarty
    Message was edited by: Ram Chamarty

  • Is it possible to delete a released transport request

    Hello
    I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

    You can but you have to chnage status of the request:
    Use transaction SE38 or SA38 and run program: RDDIT076
    Set your request number and run the program
    After request is shown double click on it
    You should be able to change status from R to D
    And now, you can delete the transport for example in transaction: SE10...
    Help on ABAP: Few Tips for Transport Request Manipulation

  • Error while releasing Transport request number

    Hi Friends,
                       Whenever i release the Transport request from SE01 i am getting the following error. Please view the attached image . Could you please explain about that error ? and how can i prevent it in future ?

    At starting it shows warning like " Your object contains error continue or cancel " but if i proceed with continue after completion of the releasing process it shows (0) successfully completed but not with an error message. As Krishna Chaitanya said i might have used any dependent object. by reading all of your answer i could understand that this is not sever problem. But i would like to understand this process very clearly . All i want to know is
    how to release the request without any inconsistencies?
    and which is the best way, ?
    is there any  requisition before i initiate releasing ?

Maybe you are looking for

  • FI Substitution exit to Business area not possible in the Standard SAP

    Hi Experts I need to derive the business area from the funds centre (local government) in the FI Substitution.  This is allowed in the Co Substitution though but it must come ahead of OKB9. We get the following with loading the Bank Statement FF_5. E

  • RemoteFX Poor Performance

    Hello, I am experiencing poor performance with a virtualized Windows 8.1 Enterprise. When I do not have the "RemoteFX 3D Video Adapter" added to the VM Windows 8.1 is more responsive (with simple things like moving windows around the desktop) but of

  • Reports Alignment Problem

    In a data model,parent query is: select distinct tr_st_loginid from TR_SWAPDAILYTRANS where 1=1 &empno And a child query is, SELECT TR_ST_LOGINID, nvl(time_in,d), nvl(to_char(tr_st_logintime,'HH24:MI:SS'),'0') tr_st_logintime FROM (SELECT TO_DATE(:P_

  • Seeing full URL in the address window

    When using Weblogic, is there a way to not show the full URL of pages within an app? After logging into an application, I can copy the URL displayed, open a new IE session, paste the URL in the address box, and be taken directly into the application

  • Where to Create New ChangOver Method Rule

    Dear All, I would lke to create a new Changeover Method Rule in IMG. I understand that there are 3 Changeover Methods as follows in standard SAP which allows user modication: X     Free for user modification 1 Y     Free for user modification 2 Z