Releasing transport requests with job roles take forever after upgrading to Netweaver 7

Dear experts,
Some time ago we've out SAP ECC 5 system to ECC 6. Since then, it takes a very long time to release transport requests containing job roles.
For example, a request containing 154 job roles (1 template and 153 derived roles) took 4 hours to release in our DEV system. Before the upgrade this only took a couple of minutes.
Afterwards, the import in our QAS and PRD system don't take longer than normal.
Apparently this time is taken by the Export phase:
Checks at Operating System Level
17.04.2014 09:50:03
(0) Successfully Completed
Pre-Export Methods
17.04.2014 09:50:37
(0) Successfully Completed
Export
17.04.2014 13:51:02
(0) Successfully Completed
Does anyone know what causes this and how to solve?
Kind regards,
Nicolas

Hello Nicolas,
What I understood from your description is that ,it takes very long time to release the job. Once it is released, execution does not take much time.
To me it seems to be background job/work process issue. Maybe all the background work process are busy to execute current jobs and no free work process available for the jobs which are in the queue. In that case, if possible try to increase number of bg work processes.
Check for any performance issues during that period. Check if there is any locking issue and jobs are stuck because of that.
Hope this helps to investigate the issue
Regards,
Archana

Similar Messages

Releasing transport request has an error during the 'export' step.

Hello Everyone,
My environment is ERP 6.0 EHP6, AIX 6.3, Oracle 11g.
We have a transport request that was created in our development system by deleting some obsolete roles. When we try to release the transport request to our q/a system it terminates with errors in the export step.
The errors are.
   End of export R3TRTABUUSR10
   no E071K or E071K_STR entries found for R3TRTABUUSR11
   Start export R3TRTABUUSR12 ...
   no E071K or E071K_STR entries found for R3TRTABUUSR13
Of course we cannot create a new transport request because the roles were deleted.
Can someone please explain to me what could have cause this type of error and possibly how to resolve it?
Regards,
Ron

Hi Ron,
As per your log, no E071K or E071K_STR entries found forR3TRTABUUSR11
no E071K or E071K_STR entries found for R3TRTABUUSR1
Looks like there is no entry found for E071K or E071K_STR in table USR11 and USR13.
Please check those table and make sure the above entries are there, if not that could be the issues.
Also, please check if these tables (USR10, USR11, USR12 USR13) are active in SE14.
Thanks
Adil

Releasing transport request taking long time

Hi All,
I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
In SM50, i didn't find any processes running.
Can anyone tell me the solution.
Thanks & Regards
Uday

Hi Uday,
>> I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
You didn't note what release your are running on, but you can check the note 1541334 - Database connect takes two minutes
>> In SM50, i didn't find any processes running.
It is normal, because the system exports the transport request by "tp" command at the OS level, after TMS complete its job on a DIALOG wp.
Best regards,
Orkun Gedik

Urgent Correction: Release transport request (transport is red)

Hello!
Has some one experience to solve the problem bellow:
By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
AGR_1016 table class is 'C'. Entries are only imported to client '000'.
AGR_1016B table class is 'C'. Entries are only imported to client '000'.
AGR_PROF table class is 'C'. Entries are only imported to client '000'.
AGR_USERT table class is 'C'. Entries are only imported to client '000'.
AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
Main import
End date and time : 20071115141115
Ended with return code: ===> 8 <===
The question is:
I would like to copy some existing role to cutomer's namespace Z... save the rolle and transport the role via CharM.
Is it usual to get the error I get?
Thank you very much!
regards
Thom

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

Is it is possible to delete released transport requests...

Hi Experts,
I had created transport request and it is released, moved to quality with errors. I dont know why I am getting errors while transporting the request, Now I am creating another transport request. Is it any possibility to delete released transport request or is there any solution for this. why I am getting errors while transporting from dev to quality.
Thanks & Regards,
RAJ

HI,
Its not possible to delete the released transport request. You should have to follow transport procedure .
T-code for Transport Connection- Check in SE09/se10 for creating requests.
For collecting objects you have go Transport connection without missing the objects.
SE03 for checking the Request objects.
Go to transport connection in RSA1 Select u r Data target or report what ever it may be in development sys & select only necessary objectsu2026 click on transport optionu2026u2026it will ask the transport request create new req. go to SE-9 release the objectu2026go to STMS import u2026RELEASE The objects in quality sysu2026same procedure to production sys.
Thanks
sudhakar.

Creation date for released transport request

Hello everybody!
Does anyone know how to find the CREATION date for a released transport request? I've already checked table E070CREATE and it only has entries for modifiable requests.
Best regards,
Luís Andrade.

I think transport is released date field in E070 is overwritten with the releasing date.
a®

Is it possible to delete a released transport request

Hello
I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

You can but you have to chnage status of the request:
Use transaction SE38 or SA38 and run program: RDDIT076
Set your request number and run the program
After request is shown double click on it
You should be able to change status from R to D
And now, you can delete the transport for example in transaction: SE10...
Help on ABAP: Few Tips for Transport Request Manipulation

List of transportation requests with date.

Hi,
how obtaining a list of transportation requests with related date?
Best regards

Hello,
You can listout the transport requests for a selected date.
For that you have to run the T.Code: SE10 /SE09.
then, you will get Transport Organizer
under the Requistion status:
--> Modifiable
--> Released beside Select a Date (i.e.in that choose a date from which you want list of TR's).
And then,
Press the below
Display button.
you can see the list of TR's for that /from that Date.
Hope this will clarify you,
Reward, if it helps,
Regards,
Srin.K

Unable to release transport request because of control program tp

I have create a customized transaction type as a copy of urgent correction SDHF. I am not able to release the transport requests using the action in the toolbox 'Release Transport Request' and I obtain the following error in the log:
could not start transport control program tp
But if I directly execute the task 'Release Transport Request' in the task list, it works.
Another strange thing is that at the beginning both ways worked, but after some days I started to have this problem.
Thanks
Antonello

I did not find any note about this error.
Someone can help me?
Thanks.
Antonello

Problem of calling BAPI to release transport request

Dear Friends,
I want to automatically release Transport Request using BAPI (BAPI_CTREQUEST_RELEASE), but I met a difficult during the process that only TR TYPE 'K'or 'W' can be release using this BAPI, if I create an addon program which TR Type is 'S' (stand for Development/Correction), then this BAPI does not work.
BTW, you can refer table E070.
Could you please kindly give me some idea to solve this problem?
Thank you in advance.
Best regards,
Nick

Dear Li Nick,
The reason that you cannot release a request of type 'S' is that type 'S' names a local correction, which cannot not be transported (and therefore of course not released).
Regards, Tino

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How to create transport request with Transaction Code

hi,
i have made a Report and then i have transport it to QAS server but mistakenly i transport the request without T-Code.
Now i want to make a new transport request with T-Code but can't understand where i can make this new request because when i go to this path*UTILITIES -> VERSION MANAGEMENT -> * it shows me the request which i have transport it.So i want to make a new request with Transaction Code included in that request.Kindly guide me where i can make this request.
Thanks.

hi,
Goto se93 give your tcode and press chagne,after entering into it make some change and click on save, it wil ask for TR. Save it and export it to quality.
Regards
harris

Database tables holding details for a non - released transport request

Dear All,
We are implementing SAP ECC 6.0 u2013 ABAP stack, on IBM iSeries / System i, i5/OS V5R4 -
SAP kernel release 7.00, kernel patch number 173
Could someone please guide me to the database tables holding the details for a non u2013 released transport request.
The problem is the following :
We encountered some data corruption in the database of our development system, so we did a restore from the previous day's backup (RSTLIB command) for the database library : R3DEVDATA, without restoring the /usr/sap/trans directory, then we did an APYJRNCHG command for the journal receiver spanning from the previous day's backup until the corruption time (remote journal on a remote system.)
We are now facing the following conflict :
One of our programmers is now un-capable of updating an ABAP program, which he previously added in a transport request, which he did not release.
( This was done during the day of the data corruption)
When the programmer is trying to update the ABAP program through the ABAP workbench, he receives the error :
'Request lock on non u2013 existent task / request DEVK921426'
No details for the transport request DEVK921426 exist in either of the two directories :
/usr/sap/trans/data , /usr/sap/trans/cofiles
The way I see to solve this conflict (eliminate this lock) is to delete the different entries related to the un-released transport request from the database tables.
Any clues would be highly appreciated.
Thank you in advance for your cooperation.
Best regards.
Reda Khalifa

Dear Volker,
Thank you very much for your interest.
The transport request of interest did not appear in transaction code SE03
Eliminating the record from table TLOCK indeed did solve the problem.
Thank you again.
Best regards.
Reda Khalifa

Delete Release transport request

Hi Gurus,
I need to delete a transport request which is already release. Please let me know what is the best way to do that.
Thanks
Liza

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

Releasing transport requests with job roles take forever after upgrading to Netweaver 7

Similar Messages

Maybe you are looking for