Reliability monitor reports hardware error

was going through my event viewer to try and find a glitch I've been having. came across an entry in the reliability viewer that has me concerned. excuse the mess below but your editor won't let me clean it up
Source
Windows
Summary
Hardware error
Date
10/16/2014 6:47 PM
Status
No solution available
Description
<dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir><dir></dir></dir></dir></dir></dir><dir></dir></dir></dir></dir><dir><dir></dir></dir></dir></dir><dir><dir><dir></dir></dir></dir></dir></dir><dir><dir><dir><dir></dir></dir></dir></dir></dir></dir><dir><dir><dir><dir><dir></dir></dir></dir></dir></dir></dir></dir><dir><dir><dir><dir><dir><dir></dir></dir></dir></dir></dir></dir></dir></dir><dir><dir><dir><dir><dir><dir><dir></dir></dir></dir></dir></dir></dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir><dir></dir></dir></dir></dir></dir></dir></dir></dir></dir></dir></dir></dir>
A problem with your hardware caused Windows to stop working correctly.
</dir>
Problem signature
<dir>
</dir><dir></dir><dir></dir><dir>
Problem Event Name: LiveKernelEvent
Code: 141
Parameter 1: ffffe000a23574d0
Parameter 2: fffff8010d748dac
Parameter 3: 0
Parameter 4: 33b8
OS version: 6_3_9600
Service Pack: 0_0
Product: 256_1
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 1033
</dir>

ZigZag3143x
28,210
Points
Top 0.5
ZigZag3143x
MCC, MVP
Joined Apr 2009
5
9
20
ZigZag3143x's threads
Show activity
I just deleted the post of the error file. When I posted it, it came up with a photo of a moon. Even though when I looked at it in onedrive it opened the log file. trying again.https://onedrive.live.com/redir?resid=2C896D862E3B4B36!6188&authkey=!ABHRn3oDiA7wdn8&ithint=file%2cevtx

Similar Messages

X220, dmesg reports hardware error, powertop abnormal power consumption by some devices

Hi, Linux dmesg command reports this: [ 2072.470923] CPU1: Package power limit notification (total events = 1) [ 2072.470926] CPU0: Package power limit notification (total events = 1) [ 2072.470929] CPU3: Package power limit notification (total events = 1) [ 2072.470932] CPU2: Package power limit notification (total events = 1) [ 2072.476690] CPU3: Package power limit normal [ 2072.476697] CPU2: Package power limit normal [ 2072.476717] CPU0: Package power limit normal [ 2072.476726] CPU1: Package power limit normal [ 2096.847029] [Hardware Error]: Machine check events logged [ 4569.973367] CPU1: Package power limit notification (total events = 2) [ 4569.973378] CPU0: Package power limit notification (total events = 2) [ 4569.973391] CPU3: Package power limit notification (total events = 2) [ 4569.973401] CPU2: Package power limit notification (total events = 2) [ 4570.018411] CPU2: Package power limit normal [ 4570.018415] CPU0: Package power limit normal [ 4570.018417] CPU1: Package power limit normal [ 4570.018419] CPU3: Package power limit normal [ 4643.555059] [Hardware Error]: Machine check events logged [ 4979.410447] CPU1: Package power limit notification (total events = 20) [ 4979.410458] CPU0: Package power limit notification (total events = 20) [ 4979.410471] CPU3: Package power limit notification (total events = 20) [ 4979.410481] CPU2: Package power limit notification (total events = 20) [ 4979.416993] CPU0: Package power limit normal [ 4979.416997] CPU1: Package power limit normal [ 4979.417000] CPU3: Package power limit normal [ 4979.417002] CPU2: Package power limit normal [ 5092.974067] [Hardware Error]: Machine check events logged powetop reports this power consumption, I think that usb, biometric coprocessor and network interface (interfaz de red) are very high. 9.49 W 100,0% Dispositivo USB: Biometric Coprocessor (UPEK) 6.65 W 100,0% Códec de audio hwC0D0: Conexant (pulseaudio ) 100,0% Códec de audio hwC0D3: Intel 5.70 W 100,0% Display backlight 5.70 W 100,0% Display backlight 3.94 W 100,0% Dispositivo USB: F5521gw (Lenovo) 2.61 W 36498 pkts/s Interfaz de red: eth3 (e1000e) Would somebody at Lenovo check this, please? Regards. PD: I'm the guy that hods number of motherboard changed record, three in two months,

I am seeing similar messages along with intermittent system hanging on my T420 (4178-CTO). Flashplayer seems to exacerbate matters.
dmesg:
[ 1431.599033] CPU1: Package power limit notification (total events = 1182)
[ 1431.599037] CPU3: Package power limit notification (total events = 1182)
[ 1431.599039] CPU2: Package power limit notification (total events = 1182)
[ 1431.599042] CPU0: Package power limit notification (total events = 1182)
[ 1431.610014] CPU1: Package power limit normal
[ 1431.610017] CPU3: Package power limit normal
[ 1431.610020] CPU2: Package power limit normal
[ 1431.610022] CPU0: Package power limit normal
[ 1499.180524] [Hardware Error]: Machine check events logged
[ 1788.410430] plugin-containe[3925]: segfault at a9ffd604 ip b298cd61 sp b15b41bc error 4 in libflashplayer.so[b27b8000+fc8000]
[ 2557.130041] CPU2: Package power limit notification (total events = 1186)
[ 2557.130045] CPU3: Package power limit notification (total events = 1186)
[ 2557.130048] CPU1: Package power limit notification (total events = 1186)
[ 2557.130051] CPU0: Package power limit notification (total events = 1186)
[ 2557.142042] CPU1: Package power limit normal
[ 2557.142045] CPU3: Package power limit normal
[ 2557.142047] CPU2: Package power limit normal
[ 2557.142049] CPU0: Package power limit normal
[ 2697.643317] [Hardware Error]: Machine check events logged
[ 2860.459336] CPU3: Package power limit notification (total events = 1339)
[ 2860.459339] CPU2: Package power limit notification (total events = 1339)
[ 2860.459343] CPU1: Package power limit notification (total events = 1339)
[ 2860.459346] CPU0: Package power limit notification (total events = 1339)
[ 2860.472336] CPU3: Package power limit normal
[ 2860.472339] CPU1: Package power limit normal
[ 2860.472342] CPU0: Package power limit normal
[ 2860.472344] CPU2: Package power limit normal
[ 2942.466964] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 00:fe:f4:50:e4:d8 tid = 6
[ 3146.075653] [Hardware Error]: Machine check events logged
[ 3189.399548] CPU3: Package power limit notification (total events = 1424)
[ 3189.399551] CPU2: Package power limit notification (total events = 1424)
[ 3189.399555] CPU1: Package power limit notification (total events = 1424)
[ 3189.399558] CPU0: Package power limit notification (total events = 1424)
[ 3189.410570] CPU2: Package power limit normal
[ 3189.410573] CPU3: Package power limit normal
[ 3189.410575] CPU1: Package power limit normal
[ 3189.410578] CPU0: Package power limit normal
[ 3239.200744] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 00:fe:f4:50:e4:d8 tid = 3
mcelog:
CPU 0 THERMAL EVENT TSC 47d41bb8fbb
TIME 1325511755 Mon Jan 2 13:42:35 2012
Processor 0 below trip temperature. Throttling disabled
STATUS c000000088320c08 MCGSTATUS 0
MCGCAP c07 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 6 Model 42
Hardware event. This is not a software error.
MCE 3
CPU 1 THERMAL EVENT TSC 47d41bba1ee
TIME 1325511755 Mon Jan 2 13:42:35 2012
Processor 1 below trip temperature. Throttling disabled
STATUS c000000088320c08 MCGSTATUS 0
MCGCAP c07 APICID 1 SOCKETID 0
CPUID Vendor Intel Family 6 Model 42
Hardware event. This is not a software error.
MCE 4
CPU 3 THERMAL EVENT TSC 47d437f3745
TIME 1325511755 Mon Jan 2 13:42:35 2012
Processor 3 below trip temperature. Throttling disabled
STATUS c000000088300808 MCGSTATUS 0
martinus@3d6:~/cam/test$ tail /var/log/mcelog
MCGCAP c07 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 6 Model 42
Hardware event. This is not a software error.
MCE 7
CPU 2 THERMAL EVENT TSC 7e2f9f9347b
TIME 1331482204 Sun Mar 11 16:10:04 2012
Processor 2 below trip temperature. Throttling disabled
STATUS c000000088230808 MCGSTATUS 0
MCGCAP c07 APICID 2 SOCKETID 0
CPUID Vendor Intel Family 6 Model 42

N78 firmware re-instal reports 'hardware error'

Hi there!
I looked for an update to my N78 (RM-235) firmware (12.0.46) today because the application installer in the phone reported failed installation of Joikuspot software.
NSU told me I had the latest available firmware, but could reinstal if I wanted - so I proceeded to do just that to see if it helped...
During the reflashing via USB cable there were messages at two points stating there had been a "problem with the device hardware - it might not work properly" -- or words to that effect.
Is this anything I should worry about? Maybe send the phone (1 month old) back to the carier (Virgin Mobile Australia)?
It seems to be working alright after the firmware installation, but you never know...
Cheers,
LMH
NB: the joikuspot software again failed to install after the reflash

There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
and here
http://forums.appleinsider.com/archive/index.php/t-8096.html
My opinion is that partitions cam be useful when:
1. the OS can't manage big volumes (as it was in the past)
2. the OS can't optimize the space on big volumes
3. want to install 2 or more separate OSes
4. organization (like in your case).
Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
Thanks for the beer!
cheers
rob

DVD DL burn issues - internal target error - fake hardware errors

I am receiving an error from DVD studio pro 3 and Toast 6 when burning DVD DL. The error only appears when burning Memorex and Verbatim discs (so far) using these applications. HP branded DVD DLs burnt fine from the same applications. Aside from the obvious, using only the HPs, has any one found a solution to this problem.
My error code is ....Formatting failed: internal device reports hardware error:internal target error 0x440x00...
I have tested this on other macs in my office and can repeat the error, so it leaves me to believe it is not actually hardware, but more over, likely firmware and or software upgrades. All equipment is less than 16 months old, intel chipped... I need a fix for our travel edit laptop - a Mac book pro.
Another thing that makes me conclude it isn't actually a hardware issue, the same discs that won't burn in Toast or DVDsp3, burn just fine using the finder's burning capabilties.
Thanks!

its been a few days since I posted my problem- i'm not surprised there hasn't been any movement on this topic... seems to be the status quo for all topics about this DVD DL problem..
For those with a similar problem, I'll review my work around for the situation.
Here is the low down review of my problem:
• the matSHITa DVD-R(UJ-846) will not burn DVD DLs from Toast 6 or DVD studio pro 3.
• the Mac says internal hardware failure or sometimes a session error - see previous posts for code
My work around:
• export disc image from DVD studio pro
• burn image as DVD-ROM (UDF) WITH simulation mode checked.
• worked for Memorex 8x DVD+R DLs, Verbatim 8x DVD+R DLs not at 8x speed, used 2x setting.
It takes a longer time for this route but has work consistently on about 15 DVD burns so far... I'll post again if this fails or stops working.
Again that is an intel chipped Mac Book Pro and iMac with the matSHITa DVD burner. Yes I capitalized that 4 letter segment on purpose.

I have a MacBook Pro, Matshita UJ-857E while recording music my drive reported an error: Sense Key=HARDWARE ERROR Sense Code=0x03,0x01 I have no idea what this means, and now my cd burner/player won't work. can someone help me fix this problem?

Please Help me. I am having problems with my MATSHITA UJ-857E DVD-R burner/writer. I burned 4 cd's and then it stopped working.
I can select my songs, and then it asks for a blank disc. It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
Can anyone give me some advice on how to fix it or what this means because I have no idea what it is talking about or how to begin to fix the problem?

tanyafrombakersfield wrote:
It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
This is an error reported by the optical drive's firmware. The tracking servo is the servomechanism which guides the laser pickup along the track on the optical disc. The error means that the servo couldn't do its job within the programmed parameters. What it doesn't say is why.
You have to be very precise as to when this error occurs. If it occurs as you wrote, while it "starts preparing to write the disc", and not when it has actually began to burn, then it's likely that the drive has gone bad and needs to be replaced.
There are other possibilities, so you should check them, but they would be more likely if the error occurred after the drive began to write. OrangeMarlin has suggested two options -- try a different brand of CD or DVD, and try cleaning the lens.

Disk Utility is reporting a fatal hardware error-S.M.A.R.T. status failing. Is there hope?

OS 10.5.8 on a 1.8 GHz Power PC G5. Installed Western Digital WD1002FAEX as a second internal hard drive. I also installd the jumper needed to slow HD down for this computer. Initialized and formated the HD was able to back up a large iPhoto file and am still able to acceass the file from the new HD. Now Disk Utility is reporting a fatal hardware error-S.M.A.R.T. status failing. Is there hope?

Is that on your first drive or the new one???
Only experience I had with SMART warning was that in less than 48 hrs it was dead for good.

Disk Utility Reporting Fatal Hardware Error

Hello all,
I woke up this morning to the flashing folder with a question mark in it on my MacBook. I know that that means the system can't find the OS so I assumed that my hard drive had magically failed overnight. So I turned my computer off and then rebooted and everything loaded properly. I went into Disk Utility and my main hard drive that has OS X on it is highlighted in red and when I click on it, Disk Utility only displays "This drive has reported a fatal hardware error to Disk Utility. If the drive has not failed completely, back up as much data as you can and then replace it with a working drive."
I have noticed EXTREMELY sluggish performance by my computer in these past two days which has required me to force quit programs and force shut down the system more times than I've had to in the whole time I've had this computer. Could this be a side effect of the failing drive?
I'm backing everything up right now, but I'm wondering how accurate Disk Utility is. The drive that I have in here is a non-Apple-installed 250 GB Western Digital that's been in here for nearly a year. Is it possible that the drive is failing beyond repair already? If so, is there any way to see the full extent of the damage and attempt to repair it before I go out and buy a new hard drive to replace it with?
Thanks for all the help and the fast responses!

Mateo wrote:
Hello all,
I woke up this morning to the flashing folder with a question mark in it on my MacBook. I know that that means the system can't find the OS so I assumed that my hard drive had magically failed overnight. So I turned my computer off and then rebooted and everything loaded properly. I went into Disk Utility and my main hard drive that has OS X on it is highlighted in red and when I click on it, Disk Utility only displays "This drive has reported a fatal hardware error to Disk Utility. If the drive has not failed completely, back up as much data as you can and then replace it with a working drive."
I have noticed EXTREMELY sluggish performance by my computer in these past two days which has required me to force quit programs and force shut down the system more times than I've had to in the whole time I've had this computer. Could this be a side effect of the failing drive?
yes, it could.
I'm backing everything up right now, but I'm wondering how accurate Disk Utility is. The drive that I have in here is a non-Apple-installed 250 GB Western Digital that's been in here for nearly a year. Is it possible that the drive is failing beyond repair already?
yes, it's quite possible.
If so, is there any way to see the full extent of the damage and attempt to repair it before I go out and buy a new hard drive to replace it with?
check the SMART status in disk utility as suggested. if it says anything but "verified" it means that the drive is expected to fail completely and you shouldn't try to repair it. If it says "verified" It's possible that reformatting will fix it so you can try that. this will wipe all the data on it so clone it off first as gbullman suggested. BTW, most drives come with manufacturers warranty longer than a year and you should be able to replace the drive. that's what I would recommend.
Thanks for all the help and the fast responses!

Reported Fatal Hardware Error to Disk Utility

I see the following message in my Power Book G4 Disk Utility:
"This drive has Reported Fatal Hardware Error to Disk Utility. If drive has not failed completely, back up as much data as you can and then replace it with a new drive."
I already made a back up my Home folder to my external HD. The install disk utility reports the same and has grey the repair uptions.
The spinning beachball appears constantly when using Safari and iTunes. What should I do?

If your Mac is no longer under the standard 1-yr warranty period or under the 3-yr extended warranty if you purchased the AppleCare extended warranty for your PB, you need to purchase a new internal hard drive that is compatible with your Mac model. This is something you can install yourself or take your Mac to an Apple authorized repair facility to purchase and have a new internal hard drive installed.
The repair facility should include re-installing whichever OX version and all software that was pre-installed and shipped with this Mac when purchased new. If this wasn't Tiger and you purchased a Tiger retail install package, you can re-install the Tiger upgrade yourself and then replace all data from your backup on the new hard drive.

Hardware error reported???

I finished burning a DVD just now and I got an error saying "The recording device reported the hardware error: No write current. (0x03, 0x01.)".. what does this mean.. I also tried the DVD to see if it worked, the menus loaded fine but when I went to select a scene.. DVD Player crashed.
also on a side question, how do I name the DVD so that when it appears on the desktop it is no the standard "my great movie".. i have the project in iMovie and iDVD saved as the same name..
cheers

From : http://www.kentidwell.com/idvd4/DVD4begin.html
(0x03, 0x01) is a 'write fault'. Bum/wrong media and/or failing DVD writer.
Try new DVD-R (another brand) and/or cleaning the DVD drive with a DVD cleaning disk.

Please help, constant video hardware error !

Please help, I can't find the problem. Am on windows 8 for a while now and I check my event viewer from time to time and I found several error massages that exists in my event viewer and the latest was while watching a movie on windows media player here the details. (I didn't have any problem while gaming even the GPU temp are idle due too every game requirements)
Source
Windows
Summary
Video hardware error
Date
‎27/‎06/‎2013 07:10
Status
Not reported
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:   LiveKernelEvent
OS Version:   6.2.9200.2.0.0.256.48
Locale ID:   2057
Files that help describe the problem
WD-20130627-0710-01.dmp
sysdata.xml
WERInternalMetadata.xml
Extra information about the problem
BCCode:   141
BCP1:   FFFFFA800FF394D0
BCP2:   FFFFF880077772B0
BCP3:   0000000000000000
BCP4:   00000000000015C0
OS Version:   6_2_9200
Service Pack:   0_0
Product:   256_1
I want to know what happened to my card?!! did the 320.18 driver damage my GPU??!!! I cant specify what is the problem is it the card or a conflict or what I am getting nuts here please help.
This is the error from Windows Media Player.
Description
Faulting Application Path:   C:\Program Files (x86)\Windows Media Player\wmplayer.exe
Problem signature
Problem Event Name:   APPCRASH
Application Name:   wmplayer.exe
Application Version:   12.0.9200.16420
Application Timestamp:   505aa40e
Fault Module Name:   nvd3dum.dll
Fault Module Version:   9.18.13.1422
Fault Module Timestamp:   51427c76
Exception Code:   c0000005
Exception Offset:   00773806
OS Version:   6.2.9200.2.0.0.256.48
Locale ID:   2057
Additional Information 1:   5861
Additional Information 2:   5861822e1919d7c014bbb064c64908b2
Additional Information 3:   f3d5
Additional Information 4:   f3d5be0cad2787556264647dc02181c3
My sys:
i3-3220 CPU 3.30GHz, Cooler Master Hyper TX3
CORSAIR Vengeance 8GB 2 x 4GB DDR3 1600
WD Caviar Blue 1TB SATA 6Gb/s WD10EZEX
MSI N560GTX-Ti Hawk (driver 314.22)
Monitor ViewSonic VX2240w 22" 1680x1050
ASUS P8B75-V Intel B75 SATA 6Gb/s USB 3.0 (latest bios update)
HEC Cougar Evolution, 3 fans
PSU XFX Core Edition PRO550W

Another thing I do get this error randomly with other apps like Firefox 22 and Skype too which is strange. my S/N : 602-V260-050B1201119526.
This error is from Skype
Description
A problem caused this program to stop interacting with Windows.
Faulting Application Path:   C:\Windows\SysWOW64\WWAHost.exe
Problem signature
Problem Event Name:   MoAppHang
Package Full Name:   Microsoft.SkypeApp_1.8.0.111_x86__kzf8q xf38zg5c
Application Name:   praid:App
Application Version:   6.2.9200.16420
Application Timestamp:   505a90d6
Hang Signature:   d908
Hang Type:   2097152
OS Version:   6.2.9200.2.0.0.256.48
Locale ID:   2057
Additional Hang Signature 1:   d908164defd45e704df38cec71cdb6e9
Additional Hang Signature 2:   db7a
Additional Hang Signature 3:   db7a68a61e111f839b8a39fd0e33855c
Additional Hang Signature 4:   d908
Additional Hang Signature 5:   d908164defd45e704df38cec71cdb6e9
Additional Hang Signature 6:   db7a
Additional Hang Signature 7:   db7a68a61e111f839b8a39fd0e33855c
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:   LiveKernelEvent
OS Version:   6.2.9200.2.0.0.256.48
Locale ID:   2057
Files that help describe the problem
WD-20130626-0316-01.dmp
sysdata.xml
WERInternalMetadata.xml
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode:   141
BCP1:   FFFFFA8007997010
BCP2:   FFFFF880069D42B0
BCP3:   0000000000000000
BCP4:   0000000000000150
OS Version:   6_2_9200
Service Pack:   0_0
Product:   256_1

How do I monitor internal hardware temperatures?

I have a MBP about 2.5 years old. I used to use Temperature Monitor to monitor internal hardware temperatures, but MacUpDate says it no longer works under Yosemite. When I try to use it, I get an error message about resources missing. What can I use to monitor these temperatures? Is there something in Yosemite that can report these, or do I need to buy a third party app (if so, which one)?
Thanks
Claude

You can try with iStat Pro widget.

MSi R5850 Twin Frozr - Video Hardware Errors

I seem to be getting this more and more often. Happens at various times, working, web, gaming...no consistency to it.
The error:
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:   LiveKernelEvent
OS Version:   6.1.7600.2.0.0.256.1
Locale ID:   1033
Extra information about the problem
BCCode:   117
BCP1:   FFFFFA8003D034E0
BCP2:   FFFFF88003D9440C
BCP3:   0000000000000000
BCP4:   0000000000000000
OS Version:   6_1_7600
Service Pack:   0_0
Product:   256_1
My system:
Intel Core i7 2.8 Ghz Processor, Gigabyte P55M-UD2H Motherboard, Antec Earthwatts 650 Power Supply, MSI R5850 Graphics card, 4 Gigs of Patriot Ram, Samsung 1TB Hard Drive. Asus 24" display. Windows 7 64 Bit Ultimate
I have tried removing the drivers and reinstalling. I have tried driver sweeper to remove them. The card is not overclocked. The system CPU is not overclocked. The card does not appear to be running hot. CCC reports temps around 28c. CPU runs around the same temp at idle.
I have run Virus, Malware and Spyware scans. Registry checks.

Update:
After two days of limited use I can report no video hardware errors until this morning when I went in and changed the sleep settings.
It was set to sleep the monitor in 10 minutes and put the computer to sleep in 30 minutes. It was also set to require a password at wakeup.
These were the default settings after the Windows 7 install.
The failures happened within 2 minutes of each other and I was not at the computer. It looks like the driver tried to recover and then failed again 2 minutes later. When I tried to wake the computer it was locked up. Blacks screen butI could seethe cursor. I had to force a restart.
I have gone back and restored the sleep defaults to see if the problem goes away.
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:   LiveKernelEvent
OS Version:   6.1.7600.2.0.0.256.1
Locale ID:   1033
Files that help describe the problem
WD-20110111-1908.dmp
sysdata.xml
WERInternalMetadata.xml
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode:   117
BCP1:   FFFFFA80038F1490
BCP2:   FFFFF880041A9008
BCP3:   0000000000000000
BCP4:   0000000000000000
OS Version:   6_1_7600
Service Pack:   0_0
Product:   256_1
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:   LiveKernelEvent
OS Version:   6.1.7600.2.0.0.256.1
Locale ID:   1033
Files that help describe the problem
WD-20110111-1911.dmp
sysdata.xml
WERInternalMetadata.xml
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode:   117
BCP1:   FFFFFA80038EA4E0
BCP2:   FFFFF880041A9008
BCP3:   0000000000000000
BCP4:   0000000000000000
OS Version:   6_1_7600
Service Pack:   0_0
Product:   256_1

My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money.

ACS 5.1 "Launch Monitoring & Report Viewer" not working

I'm trying to view the logs on the ACS server via the web interface. When I click on "Launch Monitoring & Report Viewer", it opens a new window and I get the error "cannot display the webpage". This happens on both Firefox and IE. The URL it's trying to load is this: https://x.x.x.x/acsadmin/ReportsRedirectorAction.do
These are relatively new boxes so I don't know if I missed some config bit somewhere to enable that utility or what.
Any insight would be appreciated.
Thanks,

I had the issue in ACS 5.1 no patch and it was fixed after reboot and after applying patch three it didnt showed up. The only difference is i had a standalone ACS.Who is the log collector in your setup?
Let me know if you can apply patch here is the link for that :
http://www.cisco.com/cisco/software/release.html?mdfid=282773289&flowid=4409&softwareid=282766937&release=5.1.0.44&rellifecycle=&relind=AVAILABLE&reltype=latest
here is the procedure to apply patch 3 ( on both primary and secondary)
downlaod the file : 5-1-0-44-3.tar.gpg
and place the file in the FTP server in your enviroment
Login to the ACS CLI :
Create a repository:
acs/admin(config)# repository myrepository
acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
acs/admin(config-Repository)# user luke password skywalker
acs/admin(config-Repository)# exit
then run this command :
acs patch install patch-name.tar.gpg repository repository-name
#Installing an ACS patch requires a restart of ACS services.
Would you like to continue? yes/no
Thanks
Waris Hussain.

Is a Disk Utility "fatal hardware Error" Always fatal?

Help!
I'm traveling for the next four weeks and have my lap top with me to do work.
Last night I was working fine on my computer when all of a sudden Photoshop wouldn't open files right. I quite out of Photoshop (slow)
Then tried to quit out of everything else (slow) and finally shut down holding the Power button down. I waited a few minutes and tried to reboot.
It was REALLY slow starting back up. (about 15 to 20 minutes). I held the Power key down to turn it off and left it overnight hoping it would figure itself out by morning.
This am the same start up problem happened. I finally got it opened and manuvered to Disk Utility.
IT GAVE ME THIS MESSAGE
This drive has reported a Fatal Hardware Error to Disk utility.
If the drive has not failed completely, Back up as much as you can and
then replace it with a working drive.
HERE IS WHAT I DID EARLIER IN THE EVENING THAT I THINK MADE IT WACKY.
I hadn't installed SUITCASE X1 yet and was using the program Font Book that comes with the computer. It wasn't satifactory so I went ahead and installed Suitcase X1.
FONT BOOK kept showing a ton of open faces.
I carefully (or so I thought) went through Font Books "All fonts" window and got rid of fonts that I didn't see in the system fonts folder. (I think this is where I really may have screwed up)
FYI I am a graphic designer and use many fonts.
I store all the design fonts in a folder in USERS > SHARED> FONTS
I directed SUITCASE to "Manage system fonts"
Every thing was working fine for a few hours.
I was working in QUARK 6 easily and listening to a Podcast. No problems.
When I went to open PHOTOSHOP, it (Photoshop) started running very slow.
and all the things I mentioned above started to happen.
I have the OS10.4 install disk with me so I tried to boot from it.
(I thought maybe it had a utility on it to help fix things or maybe I could copy any important fonts that I accidently trased
(btw do you hold down OPTION C to boot from a CD or APPLE C?
I tried them all)
I couldn't get it to boot from the CD
Have I really wrecked my computer?
Do we think it's a font problem.
Can I fix it. I'm at the beach in NC and there's no techys around!!!!
I am currently typing this email on the laptop so it's not completely dead.
Just super slow and threatening to die.
What should I do??!!!
Did I mention today is my birthday?
PowerbookG4 Mac OS X (10.4.6)

It's either OPTION or C. Unfortunately, the Install CD doesn't give you much access to file operations (no Finder) as Mac OS 9 and earlier did.
If you could start it in Target Disk Mode and mount the drive on another Mac, or boot it from an external drive with a Mac OS X installation on it you could try to recover files that aren't already backed up.

Reliability monitor reports hardware error

Similar Messages

Maybe you are looking for