Reliability of the exported method calls in AM

I am wondering if the exported methods in app module are reliable. That is, when the method calls to the exported methods in AM fails for any reason, it will keep retrying until the method call succeeds. Also the marshalled method invocation packet is guaranteed to be received by the callee.

sdb2 wrote:
I have 2 questions concerning method calls in switch and for statements. Consider these two chunks of code:
1)
     switch (foo.getIntegerValue()){
          case 1:
          case 2:
     }My question is, is getIntegerValue() being called for every case statement (since it has to compare with each case) or is the method called only once?
     Once, and the value returned compared to each "case" in turn.
2)
for (Foo bla : xyz.compileFoos()) {
}Is compileFoos called once or on every iteration?
I assume it gets called only once but I would like to be sure. The reason I ask is of course to avoid multiple method calls.
any help is appreciatedAlso once, and the returned list/set/array is iterated over.

Similar Messages

  • The AcquireConnection method call failed with error code 0xC0202009.

    I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
    - Pre-execute (Error)
    Messages
    Error 0xc0202009: {F1B3B35C-FAE3-48F6-A169-4E4D8D99F9B6}: An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft JET Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (SQL Server Import and Export Wizard)
    Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "DestinationConnectionExcel" failed with error code 0xC0202009.
     (SQL Server Import and Export Wizard)
    Error 0xc004701a: Data Flow Task: component "Destination 64 - production_effectivities" (7042) failed the pre-execute phase and returned error code 0xC020801C.
     (SQL Server Import and Export Wizard)
    The entire package is running on one machine. The data source is SQL Server 2005 and the destination (this happens with both of them) is Excel or Access. Either way I cannot get the package which the wizard generated to run at all. This error occurs after the first table is exported. I'm running on WinXP SP2 with 2005 Developer and ALL components installed except analysis services.
    Anyone else have this problem or know the solution?
    Jeff

    I am getting the same error. My Destination and source both are on SQL Server 2005 on the same box.
    I am using SQL- Code for Source and and table as destination. When the package runnes under Transaction- TransactionOption-Supported then the packages excuted fine but it fails when i change the Transaction- TransactionOption to Required.
    It fails with following error code.
    [OLE DB Destination [22]] Error: The AcquireConnection method call to the connection manager "FMFCLSQADB01.DWH_Rakesh" failed with error code 0xC0202009.
    [DTS.Pipeline] Error: component "OLE DB Destination" (22) failed the pre-execute phase and returned error code 0xC020801C.
    [Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
    [Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
    When i change the source SQL query to Table or View then it works fine.
    Thanks for any suggestion.
    Regards
    Rakesh
    Now, my issues related to “SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction."…..”. are fixed.
    This is one of the very common errors that comes up in SSIS (SQL Server Integration service) 
    I have faced this issue for at-least two occasions. Both of them have one common setting: “TransactionOption” was set to “Required”.
    In first case, I had multiple dataflow tasks but there were no sequence given. There were no error if I ran the package with TransactionOption=Supported. But when I ran the package in TransactionOption= Required, it got failed.
    To fix the issue I have changed my package and put the entire dataflow task one after another (connected thru Constraint).  
    In another case, where I was doing data transfer from one server to another, I had to configure the MSDTC.

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

    I have a SSIS project that I am newly running on the SQL server (2005) .  It was previously run on my PC.  I am importing data from a DB2 server to the SQL server.
    I am in the SA group on the server
    My connection to DB2 works
    When open the package and run it in preview mode, I can retrieve the data.
    When I execute the package I get the below errors:
    [MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
    [DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
    What I have already done that has not worked:
    The original Protection level was set to EncryptSensitiveWithPassword. 
    I have reset the Package Password.
    I have set the protection level to DontSaveSensitive
    I saved the package on the server and set a Package Password.
    I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
    Error continues

    Yes.  The Drivers are installed and I have a successfull connection.  I am trouble shooting the issue on the server in BIDS.  I can connect to the DB2 server via the Connectionmanager.  I can also preview the data in the OLE
    DB source connection.  Therefore I know that I have a proper connection
    If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
    will enable you to change connection info at runtime.
    If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • What is the diffreence between call transaction and session method

    hi gurus
    can any one suggest me
    what is the difference between call transaction and session methods
    in which cases we have to use teh call transaction and
    in which cases we have to use session method.
    thank you
    regards
    kals.

    CLASSICAL BATCH INPUT (Session Method)
    CALL TRANSACTION
    BATCH INPUT METHOD:
    This method is also called as ‘CLASSICAL METHOD’.
    Features:
    Asynchronous processing.
    Synchronous Processing in database update.
    Transfer data for more than one transaction.
    Batch input processing log will be generated.
    During processing, no transaction is started until the previous transaction has been written to the database.
    CALL TRANSACTION METHOD :
    This is another method to transfer data from the legacy system.
    Features:
    Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
    Updating the database can be either synchronous or asynchronous. The program specifies the update type.
    Transfer data for a single transaction.
    Transfers data for a sequence of dialog screens.
    No batch input processing log is generated.
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
    Differences between call transaction and session.
    Session Method:
    1) Data is not updated in the database table until the session is processed.
    2) No sy-subrc is returned.
    3) Error log is created for error records.
    4) Updation is always synchronous.
    Call Transaction Method:
    1) Immediate updation in the database table.
    2) sy-subrc is returned.
    3)Error need to be handled explicitly.
    4) updation can be synchronous as well as asynchronous.
    2) ya u can use using the N mode no screen.
    3)u can't handle multiple transaction in call transaction.
    4) u can handle multiple transaction in session using the BDC_INSERT fm.
    5)When u go to SM35 u can able to see the error records.
    Which is best?
    That depends on your requirement. Both of them have there advantages.
    According to the situation u can choose any one of these.
    difference between batch input and call transaction in BDC Session method.
    1) synchronous processing.
    2) can tranfer large amount of data.
    3) processing is slower.
    4) error log is created
    5) data is not updated until session is processed.
    Call transaction.
    1) asynchronous processing
    2) can transfer small amount of data
    3) processing is faster.
    4) errors need to be handled explicitly
    5) data is updated automatically
    For session method,these are the function modules to b used.
    BDC_OPEN_GROUP
    BDC_INSERT
    BDC_CLOSE_GROUP
    For call transaction,this is the syntax.
    CALL TRANSACTION TCODE USING BDCDATA
    MODE A or E or N
    UPDATE A or S
    MESSAGES INTO MESSTAB.
    Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
    In the BDC call transaction method
    We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
    Eg: Loop at itab.
    call transaction FB01
    capture errors
    endloop.
    In the session method.
    We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
    Check these link:
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    http://www.sap-img.com/abap/question-about-bdc-program.htm
    http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
    http://www.planetsap.com/bdc_main_page.htm
    Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
    But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
    With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
    Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
    You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
    Session Method
    1) Session method supports both small amount of data aswell as large amount of data
    2) data processing is asynchronus and data updation is synchronus.
    3) it process multiple apllication while perfomaning validations.
    4) in session method data will be updated in data base only after processing session only.
    5) system provide by default logfile for handling error records.
    6) it supports both foreground aswell as background process
    in bdc we use FM ...
    bdc_open_group " for creating Session
    bdc_insert " adding transaction and bdcdata table for updating database
    bdc_close_group " for closing Session
    Call Transaction
    1) Call transaction exclusively for small amout of data
    2) it supports only one apllication while perfoming validations
    3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
    we can create logfile by using structure....BDCMSGCOLL
    4) it doesn't support background processing.
    5) data processing is synchronous and Data updation is Synchronous( default), in
    this method also supports daya updation in asynchronus process also.
    syntax:
    Call transaction <transaction-name> using BDCDATA
    mode <A/N/E>
    update <L/A/S>
    messages into BDCMSGCOLL.
    BDC:
    Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
    Features :
    BDC is an automatic procedure.
    This method is used to transfer large amount of data that is available in electronic medium.
    BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
    BDC uses normal transaction codes to transfer data.
    Types of BDC :
    CLASSICAL BATCH INPUT (Session Method)
    CALL TRANSACTION
    BATCH INPUT METHOD:
    This method is also called as &#8216;CLASSICAL METHOD&#8217;.
    Features:
    Asynchronous processing.
    Synchronous Processing in database update.
    Transfer data for more than one transaction.
    Batch input processing log will be generated.
    During processing, no transaction is started until the previous transaction has been written to the database.
    CALL TRANSACTION METHOD :
    This is another method to transfer data from the legacy system.
    Features:
    Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
    Updating the database can be either synchronous or asynchronous. The program specifies the update type.
    Transfer data for a single transaction.
    Transfers data for a sequence of dialog screens.
    No batch input processing log is generated.
    For BDC:
    http://myweb.dal.ca/hchinni/sap/bdc_home.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
    http://www.sap-img.com/abap/learning-bdc-programming.htm
    http://www.sapdevelopment.co.uk/bdc/bdchome.htm
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
    http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
    Check these link:
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    http://www.sap-img.com/abap/question-about-bdc-program.htm
    http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
    http://www.planetsap.com/bdc_main_page.htm
    call Transaction or session method ?
    Check the following links:
    http://www.sap-img.com/bdc.htm
    See below example code :
    Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
    Once you execute the program and it creates the session at SM35 Transaction.
    Report : ZMPPC011
    Type : Data upload
    Author : Chetan Shah
    Date : 05/05/2005
    Transport : DV3K919557
    Transaction: ??
    Description: This ABAP/4 Program creates new Production Versions
    (C223). It accepts tab-delimited spreadsheet input and
    creates BDC sessions.
    Modification Log
    Date Programmer Request # Description
    06/10/2005 Chetan Shah DV3K919557 Initial coding
    report zmppc011 no standard page heading line-size 120 line-count 55
    message-id zz.
    pool of form routines
    include zmppn001.
    Define BDC Table Structure
    data: begin of itab_bdc_tab occurs 0.
    include structure bdcdata.
    data: end of itab_bdc_tab.
    Input record layout of Leagcy File
    data: begin of itab_xcel occurs 0,
    matnr(18) type c,
    werks(4) type c,
    alnag(2) type c,
    verid(4) type c,
    text1(40) type c,
    bstmi like mkal-bstmi,
    bstma like mkal-bstma,
    adatu(10) type c,
    bdatu(10) type c,
    stlal(2) type c,
    stlan(1) type c,
    serkz(1) type c,
    mdv01(8) type c,
    elpro(4) type c,
    alort(4) type c,
    end of itab_xcel.
    data: begin of lt_pp04_cache occurs 0,
    matnr like itab_xcel-matnr,
    werks like itab_xcel-werks,
    alnag like itab_xcel-alnag,
    plnnr like mapl-plnnr,
    arbpl like crhd-arbpl,
    ktext like crtx-ktext,
    end of lt_pp04_cache.
    data: v_ssnnr(4) type n,
    v_lines_in_xcel like sy-tabix,
    v_ssnname like apqi-groupid,
    v_trans_in_ssn type i,
    wa_xcel LIKE itab_xcel,
    l_tabix like sy-tabix,
    v_matnr like rc27m-matnr,
    v_plnnr like mapl-plnnr,
    v_plnal like mapl-plnal,
    v_tcode like sy-tcode value 'C223',
    v_plnty like plas-plnty value 'R',
    v_objty like crhd-objty value 'A',
    v_plpo_steus like plpo-steus value 'PP04',
    v_verwe like crhd-verwe value '0007'.
    Parameters
    selection-screen: skip 3.
    selection-screen: begin of block 1 with frame.
    parameters: p_name like rlgrap-filename
    default 'C:\My Documents\InputFile.txt'
    obligatory,
    bdc session name prefix
    p_bdcpfx(6) default 'ZPVCRT'
    obligatory,
    number for transction per BDC session
    p_trnssn type i
    default 2000 obligatory,
    retain the BDC session after successfull execution
    p_keep like apqi-qerase
    default 'X',
    user who will be executing BDC session
    p_uname like apqi-userid
    default sy-uname
    obligatory.
    selection-screen: end of block 1.
    possible entry list (F4 dropdown) for input file name
    at selection-screen on value-request for p_name.
    *-SELECT FILE FROM USERS LOCAL PC
    call function 'WS_FILENAME_GET'
    exporting
    DEF_FILENAME = ' '
    def_path = 'C:\Temp\'
    mask = ',.,..'
    mode = 'O'
    title = 'Select File '(007)
    importing
    filename = p_name
    RC =
    exceptions
    inv_winsys = 1
    no_batch = 2
    selection_cancel = 3
    selection_error = 4
    others = 5.
    if sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    begin the show
    start-of-selection.
    read data from input file
    perform transfer_xcel_to_itab.
    loop at itab_xcel.
    hang on to xcel line num
    l_tabix = sy-tabix.
    each line in the xcel file marks begining of new prod.version defn
    if num-of-trnas-in-session = 0, create new BDC session
    if v_trans_in_ssn is initial.
    perform bdc_session_open.
    endif.
    begin new bdc script for rtg create trans
    fill in bdc-data for prod.version maintenance screens
    perform bdc_build_script.
    insert the bdc script as a BDC transaction
    perform bdc_submit_transaction.
    keep track of how many BDC transactions were inserted in the BDC
    session
    add 1 to v_trans_in_ssn.
    if the user-specified num of trans in BDC session is reached OR
    if end of input file is reached, close the BDC session
    if v_trans_in_ssn = p_trnssn or
    l_tabix = v_lines_in_xcel.
    perform bdc_session_close.
    clear v_trans_in_ssn.
    endif.
    endloop.
    top-of-page.
    call function 'Z_HEADER'
    EXPORTING
    FLEX_TEXT1 =
    FLEX_TEXT2 =
    FLEX_TEXT3 =
    FORM TRANSFER_XCEL_TO_ITAB *
    Transfer Xcel Spreadsheet to SAP Internal Table *
    form transfer_xcel_to_itab.
    Read the tab-delimited file into itab
    call function 'WS_UPLOAD'
    exporting
    filename = p_name
    filetype = 'DAT'
    IMPORTING
    filelength = flength
    tables
    data_tab = itab_xcel
    exceptions
    conversion_error = 1
    file_open_error = 2
    file_read_error = 3
    invalid_table_width = 4
    invalid_type = 5
    no_batch = 6
    unknown_error = 7
    others = 8.
    if sy-subrc = 0.
    sort the data
    sort itab_xcel by matnr werks.
    clear v_lines_in_xcel.
    if no data in the file - error out
    describe table itab_xcel lines v_lines_in_xcel.
    if v_lines_in_xcel is initial.
    write: / 'No data in input file'.
    stop.
    endif.
    else.
    if file upload failed - error out
    write: / 'Error reading input file'.
    stop.
    endif.
    endform.
    FORM BDC_SESSION_OPEN *
    Open BDC Session *
    form bdc_session_open.
    create bdc session name = prefix-from-selectn-screen + nnnn
    add 1 to v_ssnnr.
    concatenate p_bdcpfx v_ssnnr into v_ssnname.
    open new bdc session
    call function 'BDC_OPEN_GROUP'
    exporting
    client = sy-mandt
    group = v_ssnname
    keep = p_keep
    user = p_uname
    exceptions
    client_invalid = 1
    destination_invalid = 2
    group_invalid = 3
    group_is_locked = 4
    holddate_invalid = 5
    internal_error = 6
    queue_error = 7
    running = 8
    system_lock_error = 9
    user_invalid = 10
    others = 11.
    endform.
    FORM BDC_BUILD_SCRIPT *
    Build BDC *
    form bdc_build_script.
    data: l_arbpl like crhd-arbpl,
    l_text1 like mkal-text1,
    l_mdv01 like mkal-mdv01,
    l_mapl like mapl.
    clear bdc-data itab - begin of new bdc transaction
    clear itab_bdc_tab.
    refresh itab_bdc_tab.
    read material cross reference tables to determine sap part#
    clear : v_matnr, v_plnnr, v_plnal.
    perform read_matnr_cross_ref using itab_xcel-matnr
    itab_xcel-werks
    changing v_matnr.
    determine the version description to use
    if itab_xcel-text1 is initial.
    l_text1 = itab_xcel-verid.
    else.
    l_text1 = itab_xcel-text1.
    endif.
    determine the routing group# and group ctr# to use
    perform read_routing .
    determine the production line to use
    if itab_xcel-mdv01 is initial.
    if not provided in the file then:
    prod line = work ctr on the last PP04 op of the rtg determined above
    perform read_wc_on_last_pp04 using v_plnnr v_plnal
    changing l_mdv01.
    NOTE: when executing the above form\routine, if v_plnnr is initial
    or v_plnal is initial, THEN l_mdv01 will automatically be
    returned blank (ie initial)
    else.
    l_mdv01 = itab_xcel-mdv01.
    endif.
    build bdc script
    perform bdc_build_script_record
    fill in initial screen
    using: 'X' 'SAPLCMFV' '1000',
    ' ' 'BDC_OKCODE' '=ENTE',
    ' ' 'MKAL-WERKS' itab_xcel-werks,
    ' ' 'MKAL-MATNR' v_matnr,
    ' ' 'MKAL_ADMIN-DISPO' space,
    ' ' 'MKAL-PLNNR' space,
    ' ' 'MKAL_ADMIN-STTAG' space,
    ' ' 'MKAL-PLNNG' space,
    ' ' 'MKAL-MDV01' space,
    ' ' 'MKAL-PLNNM' space,
    click create button on initial screen and go to detail screen
    'X' 'SAPLCMFV' '1000',
    ' ' 'BDC_OKCODE' '=CREA',
    fill in the detail screen and go back to initial screen
    'X' 'SAPLCMFV' '2000',
    ' ' 'BDC_OKCODE' '=CLOS',
    ' ' 'MKAL_EXPAND-MATNR' v_matnr,
    ' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
    ' ' 'MKAL_EXPAND-TEXT1' l_text1,
    ' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
    ' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
    ' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
    ' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
    ' ' 'MKAL_EXPAND-PLTYG' v_plnty,
    ' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
    ' ' 'MKAL_EXPAND-ALNAG' v_plnal,
    ' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
    ' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
    ' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
    ' ' 'MKAL_EXPAND-MDV01' l_mdv01,
    ' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
    ' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
    save the production version from initial screen
    'X' 'SAPLCMFV' '1000',
    ' ' 'BDC_OKCODE' '=SAVE'.
    endform.
    FORM BDC_SUBMIT_TRANSACTION *
    Submit BDC Session *
    form bdc_submit_transaction.
    Load BDC script as a trqansction in BDC session
    call function 'BDC_INSERT'
    exporting
    tcode = v_tcode
    tables
    dynprotab = itab_bdc_tab
    exceptions
    internal_error = 01
    not_open = 02
    queue_error = 03
    tcode_invalid = 04.
    endform.
    FORM BDC_BUILD_SCRIPT_RECORD *
    form bdc_build_script_record using dynbegin name value.
    clear itab_bdc_tab.
    if dynbegin = 'X'.
    move: name to itab_bdc_tab-program,
    value to itab_bdc_tab-dynpro,
    'X' to itab_bdc_tab-dynbegin.
    else.
    move: name to itab_bdc_tab-fnam,
    value to itab_bdc_tab-fval.
    shift itab_bdc_tab-fval left deleting leading space.
    endif.
    append itab_bdc_tab.
    endform.
    FORM BDC_SESSION_CLOSE *
    Close BDC Session *
    form bdc_session_close.
    close the session
    call function 'BDC_CLOSE_GROUP'
    exceptions
    not_open = 1
    queue_error = 2
    others = 3.
    skip 2.
    if sy-subrc ne 0.
    write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
    else.
    write : / 'Session created:', v_ssnname,
    50 '# of transactions:', v_trans_in_ssn.
    endif.
    endform.
    *& Form read_routing_cache
    *FORM read_routing_cache USING pi_matnr
    pi_werks
    pi_alnag
    pi_verid
    pi_mdv01.
    DATA: BEGIN OF lt_plpo OCCURS 0,
    vornr LIKE plpo-vornr,
    objty LIKE crhd-objty,
    objid LIKE crhd-objid,
    arbpl LIKE crhd-arbpl,
    END OF lt_plpo,
    l_mapl_plnnr LIKE mapl-plnnr.
    determine the routing group#
    CLEAR lt_pp04_cache.
    chk if its in the cache first, if not then get it from MAPL table
    and put it in the cache
    READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
    werks = pi_werks
    alnag = pi_alnag.
    IF sy-subrc = 0.
    do nothing - lt_pp04_cache header line has rtg#
    ELSE.
    get the routing group # from MAPL
    SELECT plnnr INTO l_mapl_plnnr
    FROM mapl UP TO 1 ROWS
    WHERE matnr = pi_matnr AND
    werks = pi_werks AND
    plnty = 'R' AND
    plnal = pi_alnag AND
    loekz = space.
    ENDSELECT.
    put it in the cache internal table
    IF NOT l_mapl_plnnr IS INITIAL.
    lt_pp04_cache-matnr = pi_matnr.
    lt_pp04_cache-werks = pi_werks.
    lt_pp04_cache-alnag = pi_alnag.
    lt_pp04_cache-plnnr = l_mapl_plnnr.
    APPEND lt_pp04_cache.
    ENDIF.
    ENDIF.
    if the rtg# was determined AND
    the work center was not determined yet AND
    work center was really needed for this line in the input file
    then
    read the work center from last PP04 operation on the routing
    update the cache accordingly
    IF NOT lt_pp04_cache-plnnr IS INITIAL AND
    lt_pp04_cache-arbpl IS INITIAL AND
    ( pi_verid IS INITIAL OR
    pi_mdv01 IS INITIAL ).
    read the last PP04 operation
    CLEAR lt_plpo.
    REFRESH lt_plpo.
    SELECT vornr eobjty eobjid e~arbpl
    INTO CORRESPONDING FIELDS OF TABLE lt_plpo
    FROM plas AS b
    INNER JOIN plpo AS c
    ON bplnty = cplnty AND
    bplnnr = cplnnr AND
    bzaehl = czaehl
    INNER JOIN crhd AS e
    ON carbid = eobjid
    WHERE b~plnty = v_plnty AND
    b~plnnr = lt_pp04_cache-plnnr AND
    b~plnal = lt_pp04_cache-alnag AND
    c~loekz = space AND
    c~steus = v_plpo_steus AND
    e~objty = v_objty AND
    e~werks = lt_pp04_cache-werks AND
    e~verwe = v_verwe.
    SORT lt_plpo BY vornr DESCENDING.
    READ TABLE lt_plpo INDEX 1.
    IF NOT lt_plpo-arbpl IS INITIAL.
    lt_pp04_cache-arbpl = lt_plpo-arbpl.
    read work center description
    SELECT SINGLE ktext INTO lt_pp04_cache-ktext
    FROM crtx WHERE objty = lt_plpo-objty AND
    objid = lt_plpo-objid AND
    spras = sy-langu.
    the following read will get the index of the correct record to be
    updated in the cache
    READ TABLE lt_pp04_cache
    WITH KEY matnr = pi_matnr
    werks = pi_werks
    alnag = pi_alnag.
    MODIFY lt_pp04_cache
    INDEX sy-tabix
    TRANSPORTING arbpl ktext.
    ENDIF.
    ENDIF.
    *ENDFORM. " read_last_pp04_operation_cache
    *& Form read_routing
    form read_routing.
    data: begin of lt_mapl occurs 0,
    plnnr like mapl-plnnr,
    plnal like mapl-plnal,
    end of lt_mapl,
    l_arbpl like crhd-arbpl.
    get all the rtg# and grp ctr# from MAPL
    select plnnr plnal
    into corresponding fields of table lt_mapl
    from mapl
    where matnr = v_matnr and
    werks = itab_xcel-werks and
    plnty = v_plnty and "Rate Routing
    loekz = space. "with del flag = OFF
    sort lt_mapl by plnal.
    if not itab_xcel-verid is initial.
    if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
    if itab_xcel-verid = '0001'.
    read table lt_mapl index 1.
    v_plnnr = lt_mapl-plnnr.
    v_plnal = lt_mapl-plnal.
    else.
    if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
    whose work center on the last PP04 operation matches the given verid
    loop at lt_mapl.
    clear l_arbpl.
    get the work center from the last PP04 operation
    perform read_wc_on_last_pp04 using lt_mapl-plnnr
    lt_mapl-plnal
    changing l_arbpl.
    if itab_xcel-verid = l_arbpl.
    v_plnnr = lt_mapl-plnnr.
    v_plnal = lt_mapl-plnal.
    exit.
    endif.
    endloop.
    endif.
    else.
    do nothing
    endif.
    For version IDs that are other then '0000' or 'ZWIP' :--
    if itab_xcel-verid NE '0000' and
    itab_xcel-verid NE 'ZWIP'.
    if routing group# or group counter was not determined, make the
    valid-to date 99/99/9999 so that the BDC, on execution, errors out.
    if v_plnnr is initial or
    v_plnal is initial.
    itab_xcel-bdatu = '99/99/9999'.
    endif.
    endif.
    determine the routing group#
    CLEAR lt_pp04_cache.
    chk if its in the cache first, if not then get it from MAPL table
    and put it in the cache
    READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
    werks = pi_werks
    alnag = pi_alnag.
    IF sy-subrc = 0.
    do nothing - lt_pp04_cache header line has rtg#
    ELSE.
    get the routing group # from MAPL
    put it in the cache internal table
    IF NOT l_mapl_plnnr IS INITIAL.
    lt_pp04_cache-matnr = pi_matnr.
    lt_pp04_cache-werks = pi_werks.
    lt_pp04_cache-alnag = pi_alnag.
    lt_pp04_cache-plnnr = l_mapl_plnnr.
    APPEND lt_pp04_cache.
    ENDIF.
    ENDIF.
    if the rtg# was determined AND
    the work center was not determined yet AND
    work center was really needed for this line in the input file
    then
    read the work center from last PP04 operation on the routing
    update the cache accordingly
    IF NOT lt_pp04_cache-plnnr IS INITIAL AND
    lt_pp04_cache-arbpl IS INITIAL AND
    ( pi_verid IS INITIAL OR
    pi_mdv01 IS INITIAL ).
    read the last PP04 operation
    CLEAR lt_plpo.
    REFRESH lt_plpo.
    SELECT vornr eobjty eobjid e~arbpl
    INTO CORRESPONDING FIELDS OF TABLE lt_plpo
    FROM plas AS b
    INNER JOIN plpo AS c
    ON bplnty = cplnty AND
    bplnnr = cplnnr AND
    bzaehl = czaehl
    INNER JOIN crhd AS e
    ON carbid = eobjid
    WHERE b~plnty = v_plnty AND
    b~plnnr = lt_pp04_cache-plnnr AND
    b~plnal = lt_pp04_cache-alnag AND
    c~loekz = space AND
    c~steus = v_plpo_steus AND
    e~objty = v_objty AND
    e~werks = lt_pp04_cache-werks AND
    e~verwe = v_verwe.
    SORT lt_plpo BY vornr DESCENDING.
    READ TABLE lt_plpo INDEX 1.
    IF NOT lt_plpo-arbpl IS INITIAL.
    lt_pp04_cache-arbpl = lt_plpo-arbpl.
    read work center description
    SELECT SINGLE ktext INTO lt_pp04_cache-ktext
    FROM crtx WHERE objty = lt_plpo-objty AND
    objid = lt_plpo-objid AND
    spras = sy-langu.
    the following read will get the index of the correct record to be
    updated in the cache
    READ TABLE lt_pp04_cache
    WITH KEY matnr = pi_matnr
    werks = pi_werks
    alnag = pi_alnag.
    MODIFY lt_pp04_cache
    INDEX sy-tabix
    TRANSPORTING arbpl ktext.
    ENDIF.
    ENDIF.
    endform. " read_last_pp04_operation_cache
    *& Form read_wc_on_last_pp04
    form read_wc_on_last_pp04 using pi_plnnr
    pi_plnal
    changing pe_arbpl.
    data: begin of lt_plpo occurs 0,
    vornr like plpo-vornr,
    objty like crhd-objty,
    objid like crhd-objid,
    arbpl like crhd-arbpl,
    end of lt_plpo.
    get all the PP04 operations for the given rtg# & grp-ctr#
    select vornr eobjty eobjid e~arbpl
    into corresponding fields of table lt_plpo
    from plas as b
    inner join plpo as c
    on bplnty = cplnty and
    bplnnr = cplnnr and
    bzaehl = czaehl
    inner join crhd as e
    on carbid = eobjid
    where b~plnty = v_plnty and "Rate Routing
    b~plnnr = pi_plnnr and
    b~plnal = pi_plnal and
    c~loekz = space and "Oper Del Flag = OFF
    c~steus = v_plpo_steus and "PP04
    e~objty = v_objty. "WC Obj Type = 'A'
    read the last operation
    sort lt_plpo by vornr descending.
    read table lt_plpo index 1.
    pe_arbpl = lt_plpo-arbpl.
    endform. " read_wc_on_last_pp04
    Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
    Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
    Regards,
    Sunil Kumar Mutyala

  • AcquireConnection method call to the connection manager Excel connection Manager failed

    I used VS Studio 2008 (BIDS version 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results to different tabbed sheets of a single excel spreadsheet. The package was working just fine and has run
    successfully multiple times, but all of a sudden when opening the project, every single Data Flow task with an Excel Connection Manager displayed error icons. Each raises the following error message when attempting to open the Advanced Editor:
    SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at DataFlow task name: SSIS error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
    call to the connection manager Excel connection Manager failed with error code 0xC0202009. There may be error messages posted before this with more information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)
    From the time I created the original package (when it worked fine) until now:
     1) I have been using the same computer, the same login account and the same permissions.
     2) I have been writing to the same (32 bit) 2010 Excel file (which I created) in a folder on my local machine.
     3) The filename and location have not changed; a template file is used each time to move and overwrite the previous file. Both are in the same locations.
     4) I can independently open the target Excel file and the template Excel files with no errors.
     6) The ConnectionString has not changed. The Connnection String I am using is
      Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion\Results_dt01.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;".
     7) Run64BitRuntime is set to False.
    8)  Delay Validation is set to true
    9) This is not running under a SQL job  
    10) There are no child packages being run
    I CAN create a NEW Excel Connection Manager, assigning it the exact same target Excel spreadsheet, successfully, but when I attempt to assign it to the Data Flow destination this error occurs:
    "Test connection failed because of an error in initializing provider. Unspecified error."
    Thinking that the driver might be corrupt, I opened a second SSIS package, which also uses the Excel Connection Manager (same driver) and this package continues to work fine on the same workstation with no errors.
    I have searched online for causes of this error for many hours and found nothing that helps me to solve this issue.
    Does anyone have any suggestions for me?

    Yes, I have verified that the Excel file is not in use or opened by anyone, including me. It has been two months since I opened this particular package, although I have been working with other packages in this project. I just discovered that another
    package in the same project has the same problem - all Data Flows that output to an Excel Destination now have the same error icons. This second packages outputs to an entirely different Excel file than in the first package.  A summay:
    Package #1 has error on every Excel Destination and uses templateA to overwrite fileA and then writes to fileA
    Package #2 has error on every Excel Desintation and uses templateB to overwrite fileB and then writes to fileB
    Package #3 has no error on any Excel Destination and is linked to multiple files (none are A or B)
    Package #1 and #2 are in the same project, but Package #3 is in a separate project .
    I will try replacing the Excel files with new ones for Package 1 and 2.

  • How to print a method trace to a file (first method called to the end)

    I have a tomcat war that I am deploying. I want to use some command line parameter or some tool that will show me a method trace of each method that gets executed.
    There is some static initializer in the code that starts everything in the war (the war is not a web app) but simply a process that runs in the background that does stuff.
    I want to find out what the first method called in the war is and to locate the static initializer. Having a method trace would do this because this method would be printed out first.
    After the static initializer gets called I want to see a method trace of all methods called. Having this printed to a file like Class:Method(params) would be nice.
    Even better would be some sort of tool that I could open a trace file with and see method calls in the order they were called.
    I tried several Java profiling tools but none of them show me the order (first to last) of the methods called. All I need is to see a method trace from beginning to end.
    Any help would be appreciated.

    JProbe provided almost everything I needed to see a method call trace. The method graph feature was great.
    I have a single static class with a static initializer that runs in a loop but did not know what the class name was (I inherited some code and was told about the static initializer).
    So when I fired it up in JProbe it showed me the class running off the root thread. In fact I found another static initializer that was unknown to me and another oddity as well.
    The only problem is that the method call graph is collapsed and you need to click [+] to expand every method call.
    I am told by JProbe support that there was an "expand all" option in JProbe 7.0 but it is not there in 7.1.
    Not sure why they took the time, money and energy to take a needed feature out.
    It would be great to have something that did the same thing from the command line or to be able to print a method call trace out to a file but not sure how to do this.

  • 11g Task flow - Method call with router Issue

    Hi, I am using bounded task flow method call - which is default activity. The outcome of method call will go to a router and that decides which method/page fragment has to be selected. But when ever i try to call the default activity only the default out come of the router (Page fragment) is shown in the jspx. When click on some button which is binded with the default activity - the task flow is not working as i expected. Pls find the code of my task flow below.
    <?xml version="1.0" encoding="windows-1252" ?>
    <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <task-flow-definition id="methodcall2task-flow-definition">
    <default-activity>initiatetaskflow</default-activity>
    <data-control-scope>
    <shared/>
    </data-control-scope>
    <input-parameter-definition>
    <name>methodname</name>
    <value>#{CompanyBean.methodname}</value>
    </input-parameter-definition>
    <managed-bean>
    <managed-bean-name>CompanyBean</managed-bean-name>
    <managed-bean-class>com.boeing.seds.view.company.CompanyBean</managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
    </managed-bean>
    <method-call id="initiatetaskflow">
    <method>#{CompanyBean.test}</method>
    <outcome>
    <fixed-outcome>#{CompanyBean.methodname}</fixed-outcome>
    </outcome>
    </method-call>
    <router id="selectMethod">
    <case>
    <expression>#{CompanyBean.methodname eq 'default'}</expression>
    <outcome>default</outcome>
    </case>
    <case>
    <expression>#{CompanyBean.methodname eq 'addcompany'}</expression>
    <outcome>addcompany</outcome>
    </case>
    <case>
    <expression>#{CompanyBean.methodname eq 'gotoAddress'}</expression>
    <outcome>gotoAddress</outcome>
    </case>
    <case>
    <expression>#{CompanyBean.methodname eq 'gotoDist'}</expression>
    <outcome>gotoDist</outcome>
    </case>
    <default-outcome>gotoAddress</default-outcome>
    </router>
    <view id="default">
    <page>/includes/company/default.jsff</page>
    </view>
    <view id="addnewcompanyFrgmt">
    <page>/includes/company/addnewcompanyFrgmt.jsff</page>
    </view>
    <method-call id="methodCall1">
    <method>#{CompanyBean.addCompany}</method>
    <outcome>
    <to-string/>
    </outcome>
    </method-call>
    <view id="supplierAddressFrgmt">
    <page>/includes/company/supplierAddressFrgmt.jsff</page>
    </view>
    <view id="supplierDistributorFrgmt">
    <page>/includes/company/supplierDistributorFrgmt.jsff</page>
    </view>
    <control-flow-rule>
    <from-activity-id>initiatetaskflow</from-activity-id>
    <control-flow-case>
    <from-outcome>#{CompanyBean.methodname}</from-outcome>
    <to-activity-id>selectMethod</to-activity-id>
    </control-flow-case>
    </control-flow-rule>
    <control-flow-rule>
    <from-activity-id>selectMethod</from-activity-id>
    <control-flow-case>
    <from-outcome>default</from-outcome>
    <to-activity-id>default</to-activity-id>
    </control-flow-case>
    <control-flow-case>
    <from-outcome>addcompany</from-outcome>
    <to-activity-id>methodCall1</to-activity-id>
    </control-flow-case>
    <control-flow-case>
    <from-outcome>gotoAddress</from-outcome>
    <to-activity-id>supplierAddressFrgmt</to-activity-id>
    </control-flow-case>
    <control-flow-case>
    <from-outcome>gotoDist</from-outcome>
    <to-activity-id>supplierDistributorFrgmt</to-activity-id>
    </control-flow-case>
    </control-flow-rule>
    <control-flow-rule>
    <from-activity-id>methodCall1</from-activity-id>
    <control-flow-case>
    <from-outcome>goAddNew</from-outcome>
    <to-activity-id>addnewcompanyFrgmt</to-activity-id>
    </control-flow-case>
    </control-flow-rule>
    <use-page-fragments/>
    </task-flow-definition>
    </adfc-config>
    Kindly let me know what may be the issue and help me to resolve it.
    Thanks!
    Sankari Kannan

    Hi Sankari,
    Since after the initial method call, your control flow has the router as its next stop, the //method-call/method/outcome/fixed-outcome can be set to a literal value(go to router) instead of an EL.
    And let router decide where to go next(by EL).
    Or you can discard your router activity, let the method-call activity decide where to go directly by setting //method-call/method/outcome/to-string to "true". Then the return value of the method decide the next stop.
    Todd

  • Combine standard task (ABAP method call) and additional UWL Action Handlers

    Hi, i have defined a task with an asynchronous ABAP method call and a terminating event which i want to use "as is" in the universal worklist, that means that the standard action has to be the ABAP method call defined for the task.
    In addition to that i want to add an extra button to the workitem view in the worklist which opens a web dynpro application. The web dynpro needs a parameter from the workitem container. Opening the web dynpro is not required for completing the task, so i do not consider using secondary methods.
    I created an UWLConfiguration for the task type without defining the defaultAction attribute, since defaultAction should not be overwritten. I wanted to use SAPWebDynproABAPLauncher to generate the button since i can easily include values from the workitem container in the call.
    When executing a workitem from the worklist the ABAP method call is not performed, instead a window opens which just displays the workitem. The button to web dynpro is generated and works fine.
    Does anyone have a clue how i can use UWL to define an additional button with SAPWebDynproABAPLauncher without overwriting the standard task definition?
    My definition:
    <ItemTypes>
        <ItemType
    name="uwl.task.webflow.TS95100103"
    connector="WebFlowConnector"
    defaultView="DefaultView">
          <ItemTypeCriteria
    systemId="ED1CLNT100"
    externalType="TS95100103"
    connector="WebFlowConnector"/>
          <CustomAttributes>
            <CustomAttributeSource
    id="WEBFLOW_CONTAINER"
    objectIdHolder="externalObjectId"
    objectType="WebFlowContainer"
    cacheValidity="final">
              <Attribute
    name="HROBJECT_OBJEKTID"
    type="string"
    displayName="HROBJECT_OBJEKTID"/>
            </CustomAttributeSource>
          </CustomAttributes>
          <Actions>
            <Action
    name="launchWebDynPro"
    groupAction=""
    handler="SAPWebDynproABAPLauncher"
    returnToDetailViewAllowed="yes"
    launchInNewWindow="yes"
    launchNewWindowFeatures="resizable=yes,scrollbars=yes,
    status=yes,toolbar=no,menubar=no,
    location=no,directories=no">
              <Properties>
                <Property
    name="WebDynproApplication" value="hr01_app"/>
                <Property
    name="newWindowFeatures"
    value="resizable=yes,scrollbars=yes,status=yes,
    toolbar=no,menubar=no,location=no,directories=no"/>
                <Property
    name="DynamicParameter"
    value="candidacy_id=${item.HROBJECT_OBJEKTID}
    &amp;from_workflow=X"/>
                <Property
    name="openInNewWindow" value="yes"/>
                <Property
    name="System" value="SYSTEM_ALIAS_ERP"/>
                <Property
    name="WebDynproNamespace" value="hr01"/>
              </Properties>
              <Descriptions default="Show"/>
            </Action>
          </Actions>
        </ItemType>
      </ItemTypes>
    Thank you very much, best regards, Martin
    Edited by: Martin Sommer on Dec 1, 2008 5:51 PM

    found a solution with transaction launcher and custom transaction

  • Dynamic Method call with CHANGING

    Hi,
    I have the following method call:
          CALL METHOD o_salv->DISPLAY_SALV
            CHANGING
              it_data = it_ekko.
    I would like to make this dynamic so that I can call it multiple times from my program with the came set of code.
    I have this working for other Method calls, but the use the same parameters on both sides such as:
          CALL METHOD o_main->get_date
            IMPORTING
              it_ekko = it_ekko.
    being coded as such:
          CALL METHOD o_main->(v_method)
            PARAMETER-TABLE
              ptab.
    Can someone please give me some guidance on how to code the top example dynamically when the 2 variables are different?
    Hope that makes sense...thanks for your help!
    Andy

    Hello Bjorn
    I would suggest the following approach:
    (1) Collect all your GUI control instances in an itab whose line type is TYPE REF TO cl_gui_control.
    (2) Define your "free" method:
    LOOP AT mt_gui_controls INTO lo_gui_control.
    * See if gui control was text editor
      TRY.
        lo_textedit ?= lo_gui_control.
      CATCH cx_sy_move_cast_error INTO lo_error.
      ENDTRY.
      IF ( lo_error IS NOT BOUND ).
        lo_textedit->free.
    *   ... your coding
        CONTINUE.
      ENDIF.
    * See if gui control was tree
      TRY.
        lo_tree ?= lo_gui_control.
      CATCH cx_sy_move_cast_error INTO lo_error.
      ENDTRY.
    ENDLOOP.
    The FREE methods are redefined in the subclasses. However, you could try to call lo_gui_control->free directly because I am not sure if the coding of the superclass or subclass is called (I cannot test this at the moment).
    Regards
      Uwe

  • How to call actionLister after "enforcePreventUserInput" method called

    Hi,
    in my use case i have a table with inputText where i have valueChage Listener method execute and one commadImageLink button(save).
    so i have add glass pane to prevent user input until value chage event is busy. using this tutorial link.
    http://www.oracle.com/technetwork/testcontent/27-long-running-queries-169166.pdf
    and this is working fine.
    problem is when user change some value on input Text and click on save button.
    javascript method call and glass pane popup visible to user until value change event is not completed accepted. but it is skip save button action Listener method.
    i mean actionListener method of save button not executed.
    i want after executing value chage event busy state popup save method is also executed.
    How can i do this?
    regards
    Manish

    Click on the Save button after the valueChangeEvent call has returned implying after the glass pane popup closes. Won't be feasible to invoke two action listeners simultaneously unless Ajax is used for the JavaScript method call from the inputText action method to return.
    Similar to
    <h:inputText id="name" event="" value="#{}">
       <f:ajax listener="#{}" render="" />
    </h:inputText>

  • Create method call

    this.getDepartmentsLocalHome().create
    (dept.getDepartmentId(), dept.getDepartmentName());
    (the example from: http://www.oracle.com/technology/obe/obe_as_1012/j2ee/develop/endtoend/defaultejbscope/defaultejb.htm#t4)
    does the create method called like that allow to insert a new record with all its attributs setted in the controller layer?? or should i define a new create which takes all the attributes as parameters?
    thank u!

    it s the first time i develop with EJB technology.
    i dont know how to use the create method.
    i m trying the following code to add a new row in myObject table:
    public void addMyObject(MyObjectLocalDTO parametre)
    try
    MyObjectDTO obj = this.getMyObjectLocalHome().create();
    obj.setAttr1(parametre.getAttr1());
    obj.setAttr2(parametre.getAttr2());
    obj.setAttr3(parametre.getAttr3());
    obj.setRelationship_idmyobjectDTO(parametre.getRelationship_idmyobjectDTO());
    catch (NamingException e)
    System.out.println(e.toString());
    throw new javax.ejb.EJBException(e);
    catch (CreateException e)
    System.out.println(e.toString());
    throw new javax.ejb.EJBException(e);
    is that correct and enaugh to insert my row? or is there a better way to do that?
    thank u.
    regards

  • How to get the o/p of the report by calling a method in grid form or table.

    Hi All,
    I have a doubt in using the function module from the report . Can any one tell me how to achieve this.l
    method GET_CUSTOMERS.
    DATA IT_IDRANGE TYPE TABLE OF BAPICUSTOMER_IDRANGE  INITIAL SIZE 0.
    DATA IT_ADDRDATA  TYPE TABLE OF BAPICUSTOMER_ADDRESSDATA  INITIAL SIZE 0.
    DATA WA_IDRANGE LIKE LINE OF IT_IDRANGE.
    DATA WA_ADDRDATA LIKE LINE OF  IT_ADDRDATA.
    *WA_IDRANGE = IDRANGE.
    *WRITE / WA_IDRANGE.
    WA_IDRANGE-SIGN = 'I'.
    WA_IDRANGE-OPTION = 'CP'.
    WA_IDRANGE-LOW   = '*'.
    WA_IDRANGE-HIGH = ' '.
    WRITE: / WA_IDRANGE-SIGN,WA_IDRANGE-OPTION,WA_IDRANGE-LOW,WA_IDRANGE-HIGH.
    APPEND WA_IDRANGE TO IT_IDRANGE.
    CALL FUNCTION 'BAPI_CUSTOMER_GETLIST'
    EXPORTING
      MAXROWS           = 0
      CPDONLY           =
    IMPORTING
      RETURN            =
      TABLES
       IDRANGE           = IT_IDRANGE
       ADDRESSDATA       = it_addrdata
      SPECIALDATA       =
    loop at it_addrdata into wa_addrdata.
      write / wa_addrdata.
      ENDLOOP.
    endmethod.
    now from the report am calling this and i need the result ie wa_addrdata in table form so while using the FM ALV_GRID_DISPLAY in class am getting the o/p. but how do i acheive it from report(SE38)
    DATA OBJ TYPE REF TO ZGBAPI_CUSTOMER_GETLIST.
    CREATE OBJECT OBJ.
    DATA IT_IDRANGE TYPE TABLE OF BAPICUSTOMER_IDRANGE INITIAL SIZE 0.
    DATA IT_ADDRDATA  TYPE TABLE OF BAPICUSTOMER_ADDRESSDATA INITIAL SIZE 0.
    DATA WA_IDRANGE LIKE LINE OF IT_IDRANGE.
    DATA WA_ADDRDATA LIKE LINE OF  IT_ADDRDATA.
    *WRITE / WA_IDRANGE.
    *WA_IDRANGE-SIGN = 'I'.
    *WA_IDRANGE-OPTION = 'CP'.
    WA_IDRANGE-LOW   = ''.
    *WA_IDRANGE-HIGH = ' '.
    CALL METHOD OBJ->get_customers
      EXPORTING
        idrange     = WA_IDRANGE
      IMPORTING
        addressdata =  WA_ADDRDATA
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
      I_CALLBACK_PROGRAM                = ' '
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = ' '
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  = 'BAPICUSTOMER_ADDRESSDATA'
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
      IT_FIELDCAT                       =
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      I_HTML_HEIGHT_TOP                 = 0
      I_HTML_HEIGHT_END                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      IR_SALV_FULLSCREEN_ADAPTER        =
    *IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
      TABLES
        t_outtab                          =   IT_ADDRDATA
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
       OTHERS                            = 2
    IF sy-subrc <> 0.
    Implement suitable error handling here
    ENDIF.
    **"endloop.
    i want the o/p of this in table form... Pleae help.

    Thanks a lot Rod for your prompt reply.
    I agree with you about the accuracy of the data. Are you aware of any other way to track the execution times of Discoverer reports?
    Thanks
    Giovanni

  • Using a dynamic variable in the Import command of a Method call

    Hi,
    I am trying to make a Method call fully dynamic.
    I have found out how to make the Method name dynamic, but I am having trouble figuring out how to make the Importing statement dynamic.
    in my code below:
          CALL METHOD o_main->(v_call)
            IMPORTING
              it_ekko = i_ekko.
    I would like to know if it's possible to make both "it_ekko" AND "i_ekko" dynamic so I can use this same call for various tables.
    Hope that makes sense...thanks for your help.
    Andy

    Hi Andrew,
    The method call is fully dynamic; not only the parameters can be specified dynamically but also the method name.
    This is a help extract:
    DATA: line     TYPE c LENGTH 80,
          text_tab LIKE STANDARD TABLE OF line,
          filename TYPE string,
          filetype TYPE c LENGTH 10,
          fleng    TYPE i.
    DATA: meth  TYPE string,
          class TYPE string,
          ptab TYPE abap_parmbind_tab,
          ptab_line TYPE abap_parmbind,
          etab TYPE abap_excpbind_tab,
          etab_line TYPE abap_excpbind.
    DATA: exc_ref TYPE REF TO cx_sy_dyn_call_error,
          exc_text TYPE string.
    class    = 'CL_GUI_FRONTEND_SERVICES'.
    meth     = 'GUI_DOWNLOAD'.
    filename = 'c:\temp\text.txt'.
    filetype = 'ASC'.
    ptab_line-name = 'FILENAME'.
    ptab_line-kind = cl_abap_objectdescr=>exporting.
    GET REFERENCE OF filename INTO ptab_line-value.
    INSERT ptab_line INTO TABLE ptab.
    ptab_line-name = 'FILETYPE'.
    ptab_line-kind = cl_abap_objectdescr=>exporting.
    GET REFERENCE OF filetype INTO ptab_line-value.
    INSERT ptab_line INTO TABLE ptab.
    ptab_line-name = 'DATA_TAB'.
    ptab_line-kind = cl_abap_objectdescr=>changing.
    GET REFERENCE OF text_tab INTO ptab_line-value.
    INSERT ptab_line INTO TABLE ptab.
    ptab_line-name = 'FILELENGTH'.
    ptab_line-kind = cl_abap_objectdescr=>importing.
    GET REFERENCE OF fleng INTO ptab_line-value.
    INSERT ptab_line INTO TABLE ptab.
    etab_line-name = 'OTHERS'.
    etab_line-value = 4.
    INSERT etab_line INTO TABLE etab.
    TRY.
        CALL METHOD (class)=>(meth)
          PARAMETER-TABLE
            ptab
          EXCEPTION-TABLE
            etab.
        CASE sy-subrc.
          WHEN 1.
        ENDCASE.
      CATCH cx_sy_dyn_call_error INTO exc_ref.
        exc_text = exc_ref->get_text( ).
        MESSAGE exc_text TYPE 'I'.
    ENDTRY.
    BR,
    Valentin

  • How to pass a value to the export parameter for a method (public instance)?

    Hello,
      I am trying ABAP OO newly. How to pass a value to the export parameter for a method (public instance) called in a report? This *export parameter has a reference type of structure.
    Thanks in advance,
    Ranjini

    Hi,
    "class definition
    class lcl... definition.
      public section.
        method m1 imporitng par type ref to data.  "now you can pass any reference to the method, but this way you have to maintain this reference dynamically inside the method (you can't be sure what that reference is really "pointing" at)
    endclass.
    "in program
    data: r_lcl type ref to lcl...
    create object r_lcl.
    call method r_lcl
      exporting
         par    =  "pass any reference variable here
    Regards
    Marcin

Maybe you are looking for