Reliance dongle not working

Guys i was using reliance netconnect tongle on OS X 10.8 n was working gud but after updating to OS Mavericks it is not working now,...pllzzz help guys,any suggestions

Yes i do have the same problem. yesterday i upgraded to mavricks from mountain lion.
But after installing mavrics, this reliance netconnect app isnt opening. first it was asking for java update.
dont know whether reliance netconnect has anything to do with the java update.
Did it ask u to update java? have u contacted reliance? whats there reply?
Thanks in advance.

Similar Messages

Reliance dongle not working on mavericks - Solution here

This is to help those with a Reliance Dongle in India who find they cannot use it when they upgrade to Mavericks.
1) UNINSTALL the Reliance Netconnect software by going to Applications and Moving it to Trash and Emptying the Trash Bin. Trash the Reliance Netconnect Icon on your Desktop.
2) Similarly, Trash the .dmg file in your downloads if you have it for the Dongle.
3) Go to PREFERENCES->NETWORK and Delete your ZTE Terminal by highlighting it and Pressing the "-" button you see at the Bottom of the Panel.
3) Switch off the MacBook Pro. And Switch it back on with the Dongle Inserted.
4) Go to the Hard Drive folder and you should see the Dongle as a USB drive. Open it and install the .dmg file. It takes about 5 mins to install the s/w.
5). Switch off the MacBook Pro and restart - it should ask you to anyway.
6) With THE DONGLE IN PLACE go to the Hard Drive folder and EJECT the Dongle like ejecting a USB Drive.
7) Now, go PREFERENCES->NETWORK and add the ZTE Terminal by clicking on the "+" button at the bottom and choosing ZTE Terminal from Interface. I got stuck at this step because I did not eject the DONGLE in Step 6. Werid, but this is how the darn thing works.
8) Add Phone Number as #777 and your Reliance Mobile Number as the Account and repeat as the Password. Click on APPLY. Then connect. Your Dongle light should turn green now and you can now connect.
9) Minimize it. And run your Browser. You should be Online now.
GOOD LUCK!!

If you reply to yourself and mark it solved, your answer will show up better to people looking to solve this.

Broadband dongle not working

meteor BB dongle not working.. running lion on new macbook pro??.. any ideas??... user new to mac world

Talk to the vendor about an upgraded driver for Lion.
Allan

6120 Classic Bluetooth Dongle Not Working

Any ideas guys my bluetooth dongle which works fine with my 6230i will not connect on my 6120 classin its fine with usb cable but not my dongle
Bob

also, here is dmesg output when it doesn't work
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Adding 2098976k swap on /dev/sda6. Priority:-1 extents:1 across:2098976k
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
forcedeth 0000:00:07.0: irq 40 for MSI/MSI-X
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
and here is after i replug it, when it works.
usb 2-6: USB disconnect, address 4
usb 2-6: new full speed USB device using ohci_hcd and address 5
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Vodafone K3520 dongle not working with LION.

Hi guys and girls.
Have had my Vodafone dongle used on my laptop for 2 and a half years without any problems.
Installed Lion last night and now the dongle does not work. Tried downloading the latest K3520 software from Vodafone's website but says it is incompatible. Have loaded the OLD Vodafone dongle software and still can't get a connection.
LM2

Hello londonman2 and Markymark1
your links are not active anymore.
Are you still using Huawei E169 (E169G, E169V, K3520)?
I have Mac OS X Yosemite 10.10 and would like to use it with this OS.
I searched some solution almost everywhere.
Here is nice info...
http://www.3g-modem-wiki.com/page/Huawei+E169+(E169G,+E169V,+K3520)

Iball Usb modem(dongle) not working on g510 after windows 10 installation

Hi to all, I have just joined the forum to take some help from u people. I have a G510, on which i have just upgraded the OS from windows 8.1 to 10. After upgrading, some issues came like hdmi cable not working, external hard disk not detecting, etc., which with installation of drivers from lenovo website just went away. But still there is a problem of not connecting of my iball airway 21.0 Mp-58 3g usb modem with the lappy. The message coming while installation is "633The modem (or other connecting device) is already in use or is not configured properly". I have written to iball customer care for providing supporting driver for windows 10, but apart from them, if anybody else knows the way out, kindly share that to me. Thanks and regardsVirendra

Hey Dhelios and welcome to the forum -
I read this at their site and it didn't look good. Please note the NOTE:.
Release 3.01 UK - Apple Mac
Mac OS | Mac OSX 10.1-10.3 | Mac OSX 10.4
The ST-330 and ST-USB driver requires BSD support from Mac OSX.
Be sure to enable BSD support during the installation of Mac OSX!!
NOTE: The ST-330 and ST-USB driver does not support Intel based Apple Macs. For Intel based Macs we recommend using an Ethernet modem/router. A list of compatible ST-500 and ST-700 series products is available online here>

Bluetooth dongle not working - no bluetooth module - x86_64

Hi, today I have bought new bluetooth dongle (4World Accesories) and I have problem to make it work. I've read wiki, posts I could google but there is no solution that could help me with my problem. Here are some outputs:
lsusb
Bus 001 Device 020: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
dmesg
[626355.945139] usb 1-6: new full-speed USB device number 19 using xhci_hcd
journalctl -f
Feb 07 16:37:00 ithinksoPC kernel: usb 1-6: new full-speed USB device number 21 using xhci_hcd
Feb 07 16:37:00 ithiknsoPC slim[294]: thunar-volman: Unsupported USB device type.
pacman -Q | grep blue
bluez 5.14-1
bluez-firmware 1.2-8
bluez-hid2hci 5.14-1
bluez-libs 5.14-1
bluez-plugins 5.14-1
bluez-utils 5.14-1
systemctl status bluetooth.service
bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled)
Active: failed (Result: exit-code) since Fri 2014-02-07 16:24:28 CET; 18min ago
Docs: man:bluetoothd(8)
Process: 28561 ExecStart=/usr/lib/bluetooth/bluetoothd (code=exited, status=1/FAILURE)
Main PID: 28561 (code=exited, status=1/FAILURE)
Status: "Starting up"
Feb 07 16:24:28 ithinksoPC systemd[1]: Starting Bluetooth service...
Feb 07 16:24:28 ithinksoPC bluetoothd[28561]: Bluetooth daemon 5.14
Feb 07 16:24:28 ithinksoPC systemd[1]: Started Bluetooth service.
Feb 07 16:24:28 ithinksoPC systemd[1]: bluetooth.service: main process exited, code=exited, status=1/FAILURE
Feb 07 16:24:28 ithinksoPC systemd[1]: Unit bluetooth.service entered failed state.
modprobe -v bluetooth
[root@ithinksoPC /]# modprobe -v bluetooth
[root@ithinksoPC /]#
lsmod | grep blue
[root@ithinksoPC /]# lsmod | grep blue
[root@ithinksoPC /]#
ls /lib/modules/3.12.9-2-ARCH/kernel/drivers/bluetooth
ath3k.ko.gz bfusb.ko.gz bpa10x.ko.gz btmrvl.ko.gz btsdio.ko.gz btusb.ko.gz dtl1_cs.ko.gz hci_vhci.ko.gz
bcm203x.ko.gz bluecard_cs.ko.gz bt3c_cs.ko.gz btmrvl_sdio.ko.gz btuart_cs.ko.gz btwilink.ko.gz hci_uart.ko.gz
insmod /lib/modules/3.12.9-2-ARCH/kernel/drivers/bluetooth/btusb.ko.gz
insmod: ERROR: could not insert module /lib/modules/3.12.9-2-ARCH/kernel/drivers/bluetooth/btusb.ko.gz: Unknown symbol in module
hciconfig -a hci0
Can't open HCI socket.: Address family not supported by protocol
hcitool dev
[root@ithinksoPC /]# hcitool dev
Devices:
[root@ithinksoPC /]#
rfkill list
[root@aTahPC /]# rfkill list
[root@aTahPC /]#
bluetoothctl
[bluetooth]# power on
No default controller available
[bluetooth]# list
[bluetooth]#
I think main reason is that there is no bluetooth module loaded but also I can't load it anyhow, any ideas what should I do?
best regards,
ithinkso

Have the same problem with 0a12:0001 (Hama 00049232)

[SOLVED] Huawei E173s-1 mobile broadband dongle not working

Update: check the wiki entry at https://wiki.archlinux.org/index.php/Huawei_E173s
Hi,
My dongle works out-of-the-box in Ubuntu but I can't get it to work in Arch Linux.
I followed the instructions from this site: http://www.vivaolinux.com.br/dica/Modem … s-no-Linux
/etc/usb_modeswitch.d/12d1:1c0b
DefaultVendor=0x12d1
DefaultProduct=0x1c0b
TargetVendor=0x12d1
TargetProduct=0x1c05
CheckSuccess=20
MessageEndpoint=0x0f
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
/usr/lib/udev/rules.d/40-usb_modeswitch.rules
ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1c0b", RUN+="usb_modeswitch '%b/%k'"
# usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1c0b
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 003 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x0f (out) and 0x8f (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
SCSI inquiry data (for identification)
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
USB description data (for identification)
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
Setting up communication with interface 0
Using endpoint 0x0f for message sending ...
Trying to send message 1 to endpoint 0x0f ...
OK, message successfully sent
Resetting response endpoint 0x8f
Resetting message endpoint 0x0f
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
found matching product ID
adding device
Found target device, now opening
Found correct target device
Mode switch succeeded. Bye.
# modprobe usbserial vendor=0x12d1 product=0x1c0b
But when I run wvdialconf it can't find the modem:
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at [url]http://alumnit.ca/wiki/?WvDial[/url]
As a result I'm stuck with Ubuntu for the time being. ;( Any help would be very appreciated.
Edit: running sakis3g after doing the above I was able to connect but I'd still love to know how to to make it work manually with wvdial.
Last edited by jasewobble (2012-04-22 22:25:22)

Hi
Thanks for the advice above. Initially cleaned off original app
I removed the software application from Mac HD/Applications/Orange Mobile Partner
The kernel extension located at Mac HD/System/Library/Extensions/HuaweiDataCardDriver.kext
The modem script located at Mac HD/Library/Modem Scripts/HUAWEI Mobile Connect – 3G Modem
Then dragged the Orange MobilePartner file to the HD, selected 'Show Package Contents' and followed the advice above opening the .mpkg.
Was about to try and return the dongle, but now after several tests, am sure it works
Another Apple Discussion Board success

Just upgraded to 10.4.7 by Software Update - Avid dongle not working

I upgraded as I always do thru the Software Update - so it's the combo. Never really had problems like this before.
I had to reboot many times to get the desktop to come up - ran disk utilitly and fixed permissions and disk - no many errors. All fixed.
But can't run Avid Xpress pro - Avid says its a dongle combatability issue and is working on it.
I am asking here because I am lookin for other ideas - and I know there are many people with problems right now. I haven't used very many applications yet because of the holidays.
Someone already tried to go back to 10.4.6 with no luck.
Any suggestions.
PowerMac G4 Dual and PB G4 17' Mac OS X (10.4.7)

FYI - there has been an unofficial fix that works -
download the driver for the dongle.
http://sonicstudio.com/releases/SentinelDriver10.zip
It works.
i am on 10.4.7 and was freaked when it didnt work but this driver did the trick
thakyou

Orange Huawei E160E Mobile Broadband Dongle - NOT WORKING NOW!

Well as you can see from the title - i've just upgraded to Snow Leopard over the weekend - and love the 16GB of harddrive space I got back, however I came you use my Orange Huawei E160E Mobile Broadband USB Modem 'Dongle' and it doesn't work.
25 mins on the phone to Orange Tech Support, and they tell me 'sorry we can't do anymore' & 'thats what you get for being on the cutting edge of technology'!!!
Apple Care told me to install Rosetta - and still NO good!
Any ideas?

Hi
Thanks for the advice above. Initially cleaned off original app
I removed the software application from Mac HD/Applications/Orange Mobile Partner
The kernel extension located at Mac HD/System/Library/Extensions/HuaweiDataCardDriver.kext
The modem script located at Mac HD/Library/Modem Scripts/HUAWEI Mobile Connect – 3G Modem
Then dragged the Orange MobilePartner file to the HD, selected 'Show Package Contents' and followed the advice above opening the .mpkg.
Was about to try and return the dongle, but now after several tests, am sure it works
Another Apple Discussion Board success

Bluetooth dongle not working on bootup

I have an usb bluetooth dongle, inserted it, started bluetooth daemon and everything worked just fine (using kde and bluedevil). However when i rebooted i discovered that during boot the dongle doesn't get initialized so i have to unplug and plug the dongle to make it work. Also at boot up the bluetooth daemon takes a lot of time, while later it takes no time.

also, here is dmesg output when it doesn't work
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Adding 2098976k swap on /dev/sda6. Priority:-1 extents:1 across:2098976k
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
forcedeth 0000:00:07.0: irq 40 for MSI/MSI-X
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
and here is after i replug it, when it works.
usb 2-6: USB disconnect, address 4
usb 2-6: new full speed USB device using ohci_hcd and address 5
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2

I use reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some er

i used reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some error, Now i cannot use the internet !!! and itz the latest version of reliance software,,, plz help me !!!

At last i did some experiments and it solved my problem... heres the solution :
1. Install the reliance drivers and software from their website.
2. As the reliance software is not supported my mavericks it wont open, but dont worry.
3. Now after installation go to system preferences->network->and select "ZTE Wireless Terminal".
4. Configuration: Default
     Telephone number: #777
     Account name and password should be the owners number.
5.Finish ! press apply and click Connect...
   Enjoy browsing !!!

Bluetooth USB Dongle does not work

I have this generic looking USB dongle (forgot the brand) that I use with my eMachines e725 laptop. It worked fine with Linux Mint 9 KDE 64bit that I had to use for the past 1.5 years. The moment I plugged the dongle in, it was instantly detected and the bluetooth icon turned active in the system tray. However it does not work with my ArchLinux 64bit install with KDE4.6 (updated to latest packages). Due to issues with the new Kernel 2.6.39 series, I am using the LTS kernel.
lsusb:
Bus 003 Device 009: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
tail -f /var/log/messages.log
Jul 10 17:56:26 localhost kernel: [11565.480026] usb 3-1: new full speed USB device using uhci_hcd and address 9
Jul 10 17:56:26 localhost kernel: [11565.728190] usb 3-1: configuration #1 chosen from 1 choice
I've installed bluez and bluedevil. In KDE System Settings, when I go to the bluetooth options, it says no bluetooth adapters have been found.
Last edited by MetalheadGautham (2011-07-10 13:28:51)

Have you read the Bluetooth wiki page?
Seems to me you didn't run the relevant daemon.
Also, your thread title should include 'bluetooth' - 'USB dongle' on its own is too generic.
Last edited by tomk (2011-07-10 13:12:28)

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

Go to Finder > Preferences then select the General tab
Make sure External disks is selected.

My dongle is not working with compaq 610

Hi,
I have Compaq 610 laptop which is around 2 year old and it is working fine. Last week i brought "Micromax MMX352 3G USB dongle" but is is not working on my laptop.
Problem is that when i put dongle inside USB port, first it appears that laptop has detected the USB and try to install all dongle related software (automatically from Dongle stick) but suddenly (during installation), after around 1 min, USB sign disappears from laptop desktop and from device manager and after few second USB sign appears again in both laptop desktop and device manager. This process continue indefinatly.
Because of this Dongle is not able to connect as it shows message that "No device".
I have tryed the same USB dongle in different desktop (assembled and other company) and laptops (other company like HCL) and it is working fine.
Normal Usb stick (Pen drive) working fine on my laptop.
I have tried everything like:
1) Check device manager and uninstall "USB mass storage devide" (comes after putting USB dongle in USB port) and then USB dongle start installing automatically same process happens as described above.
2) Check the bios for USB port status and it is On.
3) Also disable windows firewall
4) Disable Virus protection software.
any help pls....
my E-mail: {Personal Information Removed}

Hello ashishgarg
What model laptop do you have? When I search for the Compaq 610 I see several laptops and want to make sure I provide correct steps for your model.
How Do I Locate the Model Number on the Service Tag
Since the USB dongle works on other computers the problem seems unlikely to be a problem with the dongle. Have you tried a different USB port on the laptop? Also are you using any type of HUB or docking station to attach the dongle? Based on your description it sounds like midway during installation the device is “disconnected” and “reconnected” to the computer.
I have experienced a similar problem on my own personal laptop where sometimes dongles that are large, aren’t held well enough in the USB port. This can be for multiple reasons. One case I had was the USB dongle was a bit heavy. As a result the contacts would disconnect as its weight pulled it down. In my case the solution was to put something on under the dongle to “hold it up”. This prevented the disconnecting.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Reliance dongle not working

Similar Messages

Maybe you are looking for