Reload computer software to factory original from hard disk partion D

I have an HP Pavillion Slimline s3750t, bought in May 2009
It originally had Windows Vista
It has a partitioned hard drive with the factory image on drive D
A few months after purchase I loaded Windows 7 Home Premium
I would like to wipe drive C clean and restore to the original factory condition.
I did the following steps:
PC Help & Tools
Recovery Manager
Advanced Options
Select: Recover your computer to its original factory condition
A couple of ‘Next’ and Win 7 shuts down, and Systems Recovery Options screen comes up
It asks for a user name and password and gives 3 options:
ASPNET (I don’t know what that is plus when trying it nothing happens (I have no password for it)
Dallas (my name)
HomeGroupUser$ (I am not hooked up to a homegroup right now)
I select Dallas and get 5 options: Startup Repair, System Restore, System Image Recovery, Windows Memory Diagnostic, Command Prompt.
None of these are the options I am looking for nor will do what I want.
Apparantly loading Windows 7 has interferred with the software that restores the computer to its factory condition. Is there something els I can try.

You can try the patch from the following weblink:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-77533-1&cc=us&dlc=en&lc=en&...=
The following weblink with help you with the instructions:
HP and Compaq Desktop PCs - Performing an HP System Recovery (Windows Vista)
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

Qosmio X500/00X System Recovery (Factory Reset) From Hard Disk Drive or Separate Disk

Hey Guys,
Looking for your advice and any links if any...cheers in advance
My Situation
In December 2009 I purchased a Toshiba Qosmio X500 - Model No. PQX33A-00X00J
At the time I upgraded my purchase from Toshiba Reseller BD4U, going from the standard 1x 500GB Sata drive + 1x 64GB SSD... to instead having 2x 500GB sata drives. I purchased with 3 year onsite next business day warranty, that is is now expired.
It came loaded with MS Win 7 Premium Home Edition - but no disks provided.
My Needs
I need/want to factory reset my PC - its starting to run slow
I need to re-partition from my existing 4x partitions to just having 2
The Issues
Possibly as a result of upgrading the disk drives at time of purchase, I don't believe I have a hidden Recovery partition in order to do a System Recovery from the Hard Disk Drive - see image of my current partitions attached
I don't have Win 7 OS installation disks or Toshiba Driver disks as they should have been installed by Toshiba
My Questions
Do You agree that I DONT have a Recovery Partition - when looking at the partition image? I'm confused on this point coz people say its hidden!?
Given I have no Toshiba Drivers Disk or Windows 7 OS disks - what should I do? I'm thinking of downloading Win 7 (use my product key from sticker under PC) and making a disk/USB (but need to learn how)
Is this where I get ALL necessary Toshiba drivers for my PC from?
Does Toshiba provide a link on its site and instructions on where to get Win 7 from so I can make a recover disk??
Notes
Tried to email Toshiba support but at step 1 of their email process validation failed due to my PC being out of warranty so will call them on Monday instead
THANK YOU THANK YOU, for any help you can give big ro small
Cheers
Rick

WOW, thanks Macius for that great, full and thorough reply...cheers mate
I suspected I didn't have a recovery partition - so thanks for confirming it as I planned to risk it and try! I guess it doesn't really matter why, and it would be futile to go and blame the re-seller or Toshiba at this late stage in the game in hopes they would help...
Yeah, I just went to Microsoft Software Recovery hoping to download Win 7 OS and create a recovery disk but of course Microsoft would NOT allow it due to it being software that was pre-installed on the device blah blah blah (see error image)
And I didn't bother back then in 2009 to create recovery media as you wisely descibed, mostly due to laziness and mentally putting it in the 'too hard basket'...I didn't really understand it - or much about computers at the time.
Re - your Option #2 - thanks for confirming Toshiba drivers. I could/can do this - but don't really want to buy something I already have, perhaps I'll check out ebay or see if a friend has a disk
Re - your Option #1 - I'm currently based in Vietnam and wont be back in Oz till late in the year, so will see if I can find a reliable Toshiba service provider here - but wont hold me breath on this one
I'm thinking that IF Option #1 is a No-Go then - maybe Plan B or Option #3 could be:
Do an Audit of Programs to identify those I don't need and can safely remove - then remove using Control Panel/ Remove Programs tool
Reformat all other drives (not C:// where OS is)
Then use some re-partition software e.g. Disk-Partiton.com
Any final thoughts???
Anyhow - thanks very much again
Rick

Adding music folder from hard disk to itunes causes the original music to vanish

what is causing itunes to delete original music folder from hard disk when selecting add folder to itunes

iTunes doesn't have any automatic way of re-creating your directory structure in terms of folders and playlists in iTunes. You will have to drag each music folder to a playlist and then arrange these in folders inside of iTunes (which I warn you can can slow down iTunes a lot). I guess the once chance of speeding this up will be if somebody has written an Applescript to do it, but I don't remeber seeing any anywhere.

Noise from hard disk

Hi, everyone.
I bought a new mackbook pro in this Jan. Recently, I hear some not continuously noise from hard disk, especially when i open a file in hard disk or verify the hard disk. Is something wrong with my hard disk?
Thanks

This hard disk clicking is a know problem for many laptops. If you search it on Google, you will find a lot of discussions about it in the Unbuntu Linux forums. In most cases, it is due to the Advanced Power Management (APM) feature of notebook hard drives. The default APM settings of these drives are aggressive so as to extend notebook battery life. As a consequence, the HD tries to park its actuator head to the ramp whenever it judges the system as idle. However, OS X or some third-party applications may access the hard disk quite often, resulting in a park/unpark cycle every few seconds.
Every of these cycles is counted as one load/unload cycle. Most notebook drives support up to 600,000 load/unload cycles. If a hard drive parks its head every few seconds, it may shorten its life by "using up" the cycles more quickly.
I had the same problem on my Powerbook with a Hitachi Travelstar 5K160 80GB PATA drive. I heard the frequent clicking sound right after I installed it into the laptop. The SMART status appeared to be Verified, and there was no problem with the drive itself. After searching on Google and Hitachi web site, I found the causes and solved the problem using the Hitachi Feature Tool. For other HD brands, I have no experience at all.
Basically, Travelstar 5K160 drives have three idle modes, from which a user can set one as the deepest idle state:
1) Active Idle: the actuator head is parked near the center of the disk, and power usage is 45-55% less than performance level. Recovery time to active mode is about 20ms.
2) Low Power Idle: this is usually the factory default idle mode. The head is UNLOADED to the ramp and the power consumption is 60-65% less than the performance level. Recovery time is about 300ms.
3) Low RPM idle: in this idle mode, the hard disk will spin down to a lower RPM speed. More power is saved but recovery time is much longer. (I can hear the disk spin down and spin up again a few times per minute. There is also a lag in system reaction time.)
To get rid of the hard disk clicking, you need to set Active Idle as the deepest APM idle mode. To do it on a Hitachi hard disk, you need Hitachi Feature Tool, and a Windows laptop with the same HD interface as your drive (PATA or SATA). Sadly, the feature tool is only for Windows and Linux.
You can download Hitachi Feature Tool 2.10 as an ISO image here: http://www.hitachigst.com/hdd/support/download.htm#FeatureTool and burn it into a bootable CD. The userguide of the tool is available on the same page.
Then, take out your hard drive from your Macbook and install it into a Windows laptop. Boot the machine using the Feature Tool bootable CD. Choose "Change Advanced Power Mode" from the drop-down menu.
The default value is 128 (Low Power Idle). Just increase the value toward Performance, until you see the APM mode over the value bar becomes Active Idle (starting from 192). Click OK and Exit the feature tool. Switch off the Windows laptop and take out the hard disk. Install it into your Macbook. You will not hear the clicking sound again when system is idle. The lowest APM mode will be Active Idle and hence the drive will not park its head to the ramp during operions.
If your hard drive is a Hitachi Travelstar 5K160, you can find the 5K160 specifications version 1.1 from Hitachi web site. On page 69 of the document, it explains the APM idle modes. On page 145 about the register values of the APM modes.
To set Active Idle as the deepest idle mode may adversely affect battery life. (I haven't yet tested it myself) However, there seem not to be a big difference than the Low Power Idle, according to the datasheet of 5K160. For this model, power consumption of Active Idle is 0.8W, while that of Low Power Idle is 0.6W, on average.
Hope this is helpful.

I have limited storage laptop, I want to delete music from hard-disk

I have a limited storage laptop, I want to delete music from hard-disk and just leave it on my 60Gb ipod, BUT I dont want to have to log in as a guest every time.
Any suggestions

Follow the instructions in this article and then delete the songs from your computer; they will not be deleted from the iPod automatically. You should have or make another copy of the songs before deleting them from the computer, as they can easily be lost if they are only on the iPod.
(16173)

Can't boot from hard disk or from windows 7 recovery dvd

I have a 970A-G46 motherboard.
I can't boot from hard disk or from a windows 7 recovery dvd.
If I move the hard drive to another PC, it boots fine.
If I put the DVD in another PC's dvd drive, it can be accessed.
This machine will boot from an Ubuntu dvd and I can then access the HD directories and the recovery dvd.
What do I need to do?
Help and thanks

"I can't boot from hard disk or from a windows 7 recovery dvd."
What is that DVD from? Is it from a previous computer of some kind? Same question for HDD and the OS on it.

Satellite L10-144 - Can't boot from Hard Disk

Hello.
Sorry for my english because I'm french. I have a problem with boot on this computer. I have installed windows xp on my hard disk but the computer don't boot on this hard disk. If I want to boot on this hard disk I must push F12 and select hard disk and after windows load.
In the bios the hard disk is in first but this hard disk don't boot automaticly.
Can you help me please?
Thanks a lot.

Hi Demilego,
Thats really strange... Normally the computer should boot from HDD automatically.
In your case I would check the BIOS and load the default settings.
Does it work?

VirtualBox from hard disk, nvidia glx conflict

Howdy folks, I recently started getting into arch linux and set it up for dual booting. Being a graphics engine developer for multiple platforms I began to work on adding support for linux.
What I was trying to set up was so that I can use VirtualBox to load my arch install from hard disk, which I have gotten running, so that I can use virtual box to test if things work when developing simultaneously for windows, and boot over to arch for performance optimization type stuff.
The problem I am having however is that in VirtualBox I can not get the glx extensions to load, looking at the log file it's definitely trying to load the nvidia glx extensions. My PC has an Nvidia Geforce 9600GT, so for proper support in arch I of course installed the drivers for it.
As per suggested in the wiki I removed the xorg.conf (actually just renamed it), along with a few other files in /etc/X11/xorg.conf.d that were causing problems in virtual box (mainly the 20-nvidia.conf file). I have verified it does boot into arch with full 3D support as it did when the xorg.conf was in place. But still having the problems getting the glx extension to load when inside VirtualBox.
I would greatly appreciate any help ya'll can provide, being able to load my arch install from virtual box would make developing this graphics engine of mine so much easier. But I still want to be able to boot into arch. Having to use a VirtualBox instance booting from a virtual hard disk is a real pain since it add to the places I need to sync up source code.

I think you misunderstood ngoonee. Just trying to get open gl working from within virtual box, I know it's only serving as a layer over the graphics stuff.
The problem however is that to allow gpu acceleration when I boot into it, the nvidia driver will need to remain there. But it appears the glx in the nvidia driver will not play nice with what virtual box needs.
Idea is to use the same arch install for both virtual box and the dual boot.
Last edited by chronosifter (2010-07-21 04:28:54)

Use previous "Delete from hard disk" checked state?

Is there any way for the program to use the previous "Also delete selected item(s) from the hard disk" checked state in the file deletion confirmation dialog? It gets tedious to check it every time I want to delete a file and if I forget to do it I will have an extra file sitting on my hard disk not in my catalog.

A quick shortcut that I use is to hit the spacebar (checks/unchecks the "delete from
hard disk" option), then hit the enter key to complete the process.
Michael

Cannot delete files from hard disk (after deleting from playlists)!

all of a sudden itunes stopped allowing me to automatically delete (with the warning) a downloaded podcast so I would have to go to the hard disk manually to delte the posdcast.
How do I get the system back to what it was where I delete a podcast and then get the warning and say ok to delete from hard disk?
TIA!

Hi Chris:
2 part response:
I founf the problem--somehow my itunes folder was moved to a different part of my hard drive--once I moved it back I can delete.
I can delete as follows: when I right click and click on delete, I first delete the file from itunes library--then I get prompted if I want to delete from my hard disk by sending file to recycle bin--There is also a prompt if I do not want to see the warning--which I have on as a safety precaution. So I bet the default could remove from playlist and send file to recycle bin in one move.

Copy a file from hard disk to a jar

Is there any way to copy a file from hard disk to a jar file?

hajani wrote:
No, I want to copy a file into an other jar file (like a zip or a rar file)
Edited by: hajani on Dec 7, 2008 4:11 AMIf you really do mean 'jar' file an not 'zip' or 'rar' then you can use class java.util.jar.JarFile and write your own code. If you don't feel like writing a load of code then and you can guarantee that the 'jar' executable is going to be available then you could use Runtime.exec() or it's cousin ProcessBuilder. If you mean a 'zip' file then you could use class java.util.zip.ZipFile and write a load of code. If you mean a 'rar' file then you will either have to find a 'rar' class library or again use Runtime.exec().

Godane's Archlinux boot from hard disk but it can't login in with slim

I download Godane's archiso-live-2009-09-24.iso , i havent cdrom , so i boot it from hard disk .
I extract iso to drive C: (fat32) ,two folder is "boot" "archiso-live"
my menu.lst is :
title Boot archiso-live Desktop
root (hd0,0)
find --set-root /boot/initrd.img
kernel /boot/vmlinuz elevator=deadline ramdisk_size=60% aufs nonfree=no vga=791
initrd /boot/initrd.img
load=overlay.lzm
The iso can be boot from hd ,but there isnt slim . only is console...
what can i do with this problem??

I think your problem is that load=overlay.lzm is in the wrong place.
Here is what i should look like:
title Boot archiso-live Desktop
root (hd0,0)
kernel /archiso-stable/boot/vmlinuz elevator=deadline lang=en_US keyb=us load=overlay,mesa usbdelay=5 nonfree=no xdisplay=old xdriver=no from=/dev/sda3/archiso-stable changes=/dev/sda3/changes session=xfce cdname=archiso-live
initrd /archiso-stable/boot/initrd.img
I use 'from' boot option so i can boot from my hard drive more easier. The way its booted above is for 2009-12-08 version of my archiso-live. Just thought you should know.
I hope this helps. And sorry for it being so late.

How to recovery the deleted files from hard disk like images,media files

How to recovery the deleted files from hard disk like images, media files by using c#.net

It's important to define deleted and recovery. You can recover file from the recycle bin using the Win API. Here's an
example in C/C++. You need to
pinvoke SHFileOperation.

How to transfer video from hard disk to i tune?

how to transfer video from hard disk to i tune? can any one please?? help me also in guiding if anything else is required to be done to transfer the content to ipad....

Drag it into the open iTunes application window. You may need to use a product such as MPEG Streamclip to convert it to MPEG-4 first.
(59829)

If i upgrade Snow Leopard to lion, all information will be removed? from hard disk ?, if i upgrade Snow Leopard to lion, all informatio will be removed from hard disk ?

if i upgrade Snow Leopard to lion, all information will be removed? from hard disk ?, if i upgrade Snow Leopard to lion, all informatio will be removed from hard disk ?

John Hammer said it best -- backup first and always. That's why Time Machine and periodic clones of your boot drive to an external disk are so valuable.
That said – the Lion upgrade will retain all user data, files, settings, mail, and preferences. Mind you that a few settings and their location have changed.
Before you actually use Lion, may I recommend spending the first evening looking at every single preference panel in System Preferences. Many of the user interface choices can be reverted back to mimic Snow Leopard if you choose.
Relax and enjoy Lion – it is amazing. Please holler if we can help further.

Reload computer software to factory original from hard disk partion D

Similar Messages

Maybe you are looking for