Reload OS with no Disk or TD data

I wanted to wipe my entire PC and Reload OS. How can I do this if I have no disk or thumb drive OS info? Is there a way to verify I payed already and can make my PC day 1 fresh again?

ELC
To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
What troubleshooting have you done so far?
Asking an effective question will get you help faster read how here
Suggestions for asking for help on a site.
http://www.catb.org/~esr/faqs/smart-questions.html
Wanikiya and Dyami--Team Zigzag

Similar Messages

  • I have new hard drive in macbook pro(08) and have SATA cable with external power source to old hard drive (10.5.8)via. USB port and newer drive(10.6.8) will not recognize older drive..Do I need to partition newer drive with older disk to recover data?

    I have new HD 750GB Hybrid in 2008 Macbook Pro 17" w/ Snow Leopard 10.6.8  connected to old Hard drive(250GB that had 10.5.8 on it at time of failure) via SATA cable to USB port with external power source.. Computer not acknowledging old HD at all in Disk Utility or otherwise (that I'm aware of)..Do I need to partition New HD and load old(10.5.8) onto partition to recognize older drive for data recovery? Thanks Wayno08

    You do not need to load 10.5.8 onto your new drive in order for a 10.6.8 system to see the contents of a 10.5.8 system.
    You might want to check out the hard drive troubleshooting bootk in the downloads section of this web site:
    http://scsc-online.com
    They also sell a product named Phoenix that can do OS extraction  and volume copying/cloning, but to be honest I don't know if it's appropriate in this case.
    I would suggest the following:
    Open up Terminal.app (under utilities) and type "diskutil list" without the quotes. This is the command line version of Disk Utility. If the external drive doesn't show up at all, then it's likely not connected properly, not getting power, or just plain dead. If it shows up with only a devce name like disk0s16 but no volume it means the drive is seen, the OS just can't make sense of it.
    Assuming the drive shows up, I would try to boot off the original installl disks for the system and run Disk Utility from that. I'm assuming the drive will show up. You'll want to select the option to repair the drive and then perform the option to repair the permissions.
    If the unit isn't showing up, as per step 1, try a different USB port. More importantly with your unit, try it on another side of the unit if possible. If you read the book I referenced above, some of those units have I/O boards that are separated from the logic board. If the cable from the logic board to the I/O card goes bad or has problems, which isn't all that uncommon, some or all of the ports on the I/O card may appear to be bad as well. If you use a USB port on another side, it would be routing out of a completely different I/O path, so that's a potential problem.
    If the drive is only seen with a device name such as disk0s16, it's likely either the index files are corrupt beyond Disk Utility's ability to see them. The  only thing that I think would help would be a product named DIsk Warrior, but I can't guarantee that.
    Disk Warrior can be found at:
    http://www.alsoft.com/diskwarrior/
    The company that I linked in the first link above also makes a product named Scannerz that does HD and system testing. The Scannerz/Disk Warrior combination make a good pair because the complement each other....Scannerz does what Disk Warriror can't and Disk Warrior does what Scannerz can't. However, at this point I'm not too sure getting a tool like Scannerz would be of much use because it sounds like the  damage has already been done.
    Let us know what happens.

  • How do I retrieve data from a HD that cannot be repaired with utility disk?

    Hi,
    I have a macbook pro 15 inch mid 2010. It has 4gb of ram and 500gb of storage. I recently upgraded to Mavericks OSX10.9,4.
    First of all, when turning on my mac the screen just loads forever, hence it does not pick up the HD. It also displayed the circle with a line through icon once.
    Upon noticing this, I tried to repair the disk but it said it was unable to. The other disks are ok but the MAC HD says it stopped repairing when I attempted to repair it.
    Using single user mode (command + s): I tried this, but it continued to says the same i/o error code:
    disk0s2: i/o error.n
    0 [level 3] [facility com.apple.system.fs] [errtype IO] [IOType Read] [PBlkNum 57547320] [LBlkNum 67604]
    0 [level 3] [facility com.apple.system.fs] [DevNode root_device] {mountPt /] [Path /private/var/db/dyld/dyld_shared_cache_x86_64]
    And it kept going and going.
    I'm afraid to try anything else. I have no Mac back up in time machine (I know) but I have an external. Is it possible to retrieve the data by wiping the external and using the utility disk to transfer to HD to the external? Is that what people call cloning? Is this physical damage/can i still recover the data/use it and section off the damaged parts and use the spare space?
    Help would be appreciated!

    i/o errors generally mean that a part of the disk cannot be read. That can prevent the disk mounting or prevent the entire disk being read after the error.
    Disk Utility is not great at addressing issues like this & data recovery specialists are the safest (and most expensive) option for recovering data from a disk in this state.
    As others have said it's critical to avoid any use of the disk since if it's a mechanical fault it could seize or finally give up functioning.
    If you are intent on recovering 'on your own & on the cheap' you could look at ddrescue – it clones a disk by copying the data stream whilst ignoring errors from the source disk, the data on the second disk could be 'repairable' with additional tools.
    http://www.gnu.org/software/ddrescue/ddrescue.html
    TestDisk & Photorec are also good when used for the right fault.
    http://www.cgsecurity.org
    These are all *nix tools & require competence at the command line! Just installing can be too much for some non technical users.
    You also need lots of spare disks to move data onto to run the tools.
    Kappy, is CNET Downloads really a good recommendation? They have a habit of bundling other junk with third party app installers. Go straight to the vendors site would be my advice (using 'https' where available).

  • This disk doesn't contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.

    As stated above. I get this when I try to resize my HD. Was having issues with BootCamp so I removed it and got this.
    This disk doesn’t contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.

    the same problem...
    any help?

  • How do I recover data from my macbook pro with a disk that can't be repaired?

    I'm in need of a data recovery solution.  My Macbook pro (17") running OS X Mountain Lion won't boot and is stuck on the gray startup screen with the apple icon and spinning gear and disk utility states "Error: Utility can't repair this disk.  Back up as many of your files as possible, reformat the disk, and restore your backed-up files."  Unfortunately, I don't have a back up and don't know how to access or back up the data on my drive.  Mounting it to another computer as an external drive  via firewire did not work.  Does anyone know of any solutions to extract the data from my macbook pro hard drive before I reformat it?  Any help would be greatly appreciated.

    Hi there
    I really am sorry about your problem.  I have opened up my help centre and it too states '[...]back up as much of your data as possible, reformat the disk, reinstall OS X, and then restore your backed-up data'.  It then says: If you continue to have problems with your disk, it may be physically damaged and need to be replaced. 
    I just noticed it says reinstall OS X.  If it says this then this indicates a rather serious computing problem. 
    Help centre also states: If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. [The next step is the following] Check each file in the list of affected files. [added by me]
    A damage disk causes files to be corrupted.  Also you can repair a disk by deleting corrupt files (i.e. one can still use a damaged disk providing it has been repaired).  Disk Utility is able to help to repair corruption problems but not if your program files have become corrupted due to large-scale damaged disk. 
    I understand why you want to connect to another hard disk because you want to extract your files and I would probably do the same.  I am on a 13-inch Macbook Pro trying to solve your problem.

  • HT3275 Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image "/Volumes/Data/Anthony's iMac.sparsebundle" could not be accessed (error -1). Why? They computer system is up to da

    Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
    Many thanks
    Anthony

    Try this Discussion...
    https://discussions.apple.com/message/18783684#18783684

  • I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

    I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

    Make sure that no other Macs are backing up at the time.
    Pull the power cable from the back of the Time Capsule
    Count to ten
    Plug the power cable back into the back of the Tme Capsule
    Wait a few minutes, then try a backup again.

  • Time could not backup message said the back up disk image "/Volumes/Data-1/......iMac.sparsebundle" is already in use. Can anyone help me, with what to do? Thanks

    Time could not backup message said the back up disk image "/Volumes/Data-1/......iMac.sparsebundle" is already in use.( the ..... is my name on the message)
    Can anyone please help me, with what to do?
    Thanks Sue

    Ok.. read C12 and C17 is also relevant in Pondini troubleshooting.
    http://pondini.org/TM/Troubleshooting.html
    Try the above.
    No luck then you should do
    A1 .. Load the widget so you know what TM is doing.
    A4 .. Reset of TM.
    A5.. Verify the backup.
    First thing.. though.. do a full network reboot..
    Turn off everything.. restart the modem.. wait 2min.
    Restart the TC.. wait 2min
    Restart the computer. See if it now functions.
    You might have to reset or do more severe stuff.. but try with that.
    I am offline for 8 hours..
    Pondini or one of the others here might be able to help further.

  • My mac can't find the volume" Data" on Time Capsule. Also Ican't find with the disk utility program the hard disk in the Time Capule; so I can't format the disk again. What can I do?

    My Mac can't find the volume " Data" on Time Capsule, Also I can't find with the disk-utility program the hard disk in the Time Capusule.
    So I can't format the disk in the Time Capsule
    Deconnevt and then connecting the power tp the Time Capsule gives also no solution.
    What can I do?
    Joe

    I listed the commands.. that is how you manually mount the disk.. follow exactly the commands I gave you.
    In finder use top menu, go, connect to server.
    Type in the following.
    AFP://TCname or AFP://TCIpaddress (obviously you replace with the actual name or the actual IP address).
    If that fails..
    try
    SMB://TCname
    Here is the screenshot.
    tardis4 being the name of my TC.
    It should then ask you for your credentials.
    And it should remember them in the keychain and be able to then get TM to connect.

  • Mac OS X Boot failure... I cant Repair HDD with OS Disk,Shows Repair Failed. I cant backup my files from HDD. Backup failed. But I need my all datas from HDD. I dont want to format. Cant enter safemode also. anything else..

    Mac OS X Boot failure... I cant Repair HDD with OS Disk,Shows Repair Failed. I cant backup my files from HDD. Backup failed. But I need my all datas from HDD. I dont want to format. Cant enter safemode also. anything else..
    I installed XP @Bootcamp, I cant access my Mac HDD via XP..
    What I do??? Please help me.. please...

    You can try DiskWarrior (about $100).
    If that doesn't work, and if you have no backups at all, you might need to send your hard drive to Drive Savers or a similar service. It will cost a lot of money to get the data back, I'm sorry to say.

  • HT3275 Can anyone help with this comment below. My Timecapsule cannot backup now: The backup disk image "/Volumes/Data/Bill Smith's iMac 1.sparsebundle" is already in use.

    The backup disk image “/Volumes/Data/Bill Smith’s iMac 1.sparsebundle” is already in use.

    Yes, standard ML error.. about 10 posts a day here.
    Reboot the TC.. reboot the whole network in correct order if that doesn't work.. modem.. tc.. clients.
    Read C12.
    http://pondini.org/TM/Troubleshooting.html

  • Disk Utility has Lost Connection with the Disk Managment Tool

    Hi,
    For starters, this problem is not associated with the thread that Brian Z. has posted at the top of this forum. Having said that, here's my problem:
    I had installed Security Update 2006-003, and Quicktime 7.1. Permissions were repaired before and after each installation, and all went well.
    Some hours later, I was experimenting with Apple Remote Desktop. I had activated ARD in the System Preferences>Sharing pane, and it provided me an IP address associated with ARD. I then turned on Airport, and ARD provided me with an IP address associated with that connection. However when I turned off my modem connection, System Preferences>Sharing hung, and had to be Force Quit.
    Console Log follows:
    ===== Mon May 15 2006 ===== 21:09:09 America/Anchorage =====
    2006-05-15 21:09:17.488 System Preferences[2732] Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    2006-05-15 21:09:28.224 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:308
    2006-05-15 21:09:38.230 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
    2006-05-15 21:09:48.415 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
    Thinking a plist had become corrupted, I trashed the following:
    com.apple.systempreferences.plist
    com.apple.RemoteDesktop.plist
    com.apple.Remotemanagement.plist
    com.apple.sharing.firewall.plist.
    System Preferences started out very slowly, but then all the panes except Sharing would work ok.
    I booted from the install disk and performed a Disk Repair. There were no problems reported.
    When I tried to run a Repair Permissions, after about 20 seconds I got the, "Disk Utility has lost connection with the disk management tool and can not continue. Please quit and relaunch Disk Utility."
    I quit D.U. and the Installer, and was able to successfully run a Repair Permissions from the D.U. in my Utilities folder. It had no problems to report.
    Continuting to troubleshoot the System Preferences problem, I then trashed the com.apple.preferencepanes.cache. This solved my System Preferences>Sharing problem.
    However, I am still unable to perform a Repair Permissions after booting from my install disk (I get the subject message). Repairing permissions from the Disk Utility in my Utilies folder works fine.
    Any thoughts out there on a logical way to troubleshoot where my problem is? Is there a way to get a console log when I'm running DU from the install disk, or a comparable source??
    Thanks,
    Bob

    I found this crash log that was generated about the time I had problems with System Preferences hanging.
    Thoughts?
    Bob
    Entitled "writeconfig.crash.log"
    Host Name: Bobs-Big-Mac.local
    Date/Time: 2006-05-15 21:08:17 -0800
    OS Version: 10.3.9 (Build 7W98)
    Report Version: 2
    Command: writeconfig
    Path: /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
    Version: ??? (???)
    PID: 2707
    Thread: 0
    Exception: EXC_BREAKPOINT (0x0006)
    Code[0]: 0x00000001
    Code[1]: 0x90a8d2c0
    Thread 0 Crashed:
    0 com.apple.Foundation 0x90a8d2c0 _NSRaiseError + 0xf8
    1 com.apple.Foundation 0x90a349d8 -[NSConnection sendInvocation:] + 0x6a4
    2 com.apple.Foundation 0x90a2d8e0 -[NSObject(NSForwardInvocation) forward::] + 0x198
    3 libobjc.A.dylib 0x90866810 objcmsgForward + 0xb0
    4 writeconfig 0x0000baac 0x1000 + 0xaaac
    5 writeconfig 0x0000ec84 0x1000 + 0xdc84
    6 writeconfig 0x0000ad88 0x1000 + 0x9d88
    7 writeconfig 0x0000abfc 0x1000 + 0x9bfc
    PPC Thread State:
    srr0: 0x90a8d2c0 srr1: 0x0202f030 vrsave: 0x00000000
    cr: 0x24000442 xer: 0x00000000 lr: 0x90a8d298 ctr: 0x90a23528
    r0: 0x00000000 r1: 0xbffff430 r2: 0xa0a204bc r3: 0xa0a34e20
    r4: 0x9086eb88 r5: 0x20000000 r6: 0xbffff110 r7: 0x00000000
    r8: 0x00000001 r9: 0x0030d370 r10: 0x00000239 r11: 0x28000442
    r12: 0x90a23528 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
    r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
    r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
    r24: 0x00310680 r25: 0xbffffcd8 r26: 0x00311c50 r27: 0xa0a2af6c
    r28: 0xa0a30e7c r29: 0xa0a24ae0 r30: 0x003109a0 r31: 0x90a8d1d0
    Binary Images Description:
    0x1000 - 0x28fff writeconfig /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
    0x80830000 - 0x8090efff libxml2.2.dylib /usr/lib/libxml2.2.dylib
    0x8c2bc000 - 0x8c2c5fff libBSDPClient.A.dylib /usr/lib/libBSDPClient.A.dylib
    0x8fe00000 - 0x8fe4ffff dyld /usr/lib/dyld
    0x90000000 - 0x9014ffff libSystem.B.dylib /usr/lib/libSystem.B.dylib
    0x901c0000 - 0x9026efff com.apple.CoreFoundation 6.3.9 (299.37) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x902b0000 - 0x90529fff com.apple.CoreServices.CarbonCore 10.3.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x905a0000 - 0x90610fff com.apple.framework.IOKit 1.3.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x90640000 - 0x906c8fff com.apple.CoreServices.OSServices 3.0.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x90733000 - 0x90740fff com.apple.CommonPanels 1.2.1 (1.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    0x90810000 - 0x90810fff com.apple.ApplicationServices 1.0 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x90860000 - 0x908cffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
    0x908f5000 - 0x90912fff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
    0x90940000 - 0x909b3fff com.apple.DesktopServices 1.2.5 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    0x90a20000 - 0x90b7bfff com.apple.Foundation 6.3.8 (500.61) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x90d40000 - 0x90d40fff com.apple.Carbon 10.3 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x90d50000 - 0x90d6bfff com.apple.SystemConfiguration 1.7.1 (???) /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x90d7c000 - 0x90d8cfff com.apple.speech.recognition.framework 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    0x90dd0000 - 0x90df0fff com.apple.DirectoryService.Framework 1.7.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
    0x90e10000 - 0x90e11fff com.apple.ServerControl 10.2.3 /System/Library/PrivateFrameworks/ServerControl.framework/Versions/A/ServerCont rol
    0x90e13000 - 0x90e4bfff com.apple.LaunchServices 10.3.5 (98.4) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
    0x90e60000 - 0x90e66fff com.apple.ServerPrefs 10.2.3 /System/Library/PrivateFrameworks/ServerPrefs.framework/Versions/A/ServerPrefs
    0x90e80000 - 0x90e9ffff com.apple.MediaKit 2.6 (232.3) /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
    0x90ec0000 - 0x90ec0fff com.apple.Cocoa 6.3 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x9102d000 - 0x91047fff com.apple.openscripting 1.2.1 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    0x910c0000 - 0x910c1fff com.apple.AFPDefines 2.0.1 /System/Library/PrivateFrameworks/AFPDefines.framework/Versions/A/AFPDefines
    0x910e0000 - 0x91134fff com.apple.bom 1.2.7 (64.1) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
    0x91141000 - 0x91141fff com.apple.CoreServices 10.3 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x91230000 - 0x9123afff com.apple.framework.machinesettings 1.3.3 /System/Library/PrivateFrameworks/MachineSettings.framework/Versions/A/MachineS ettings
    0x91242000 - 0x9124cfff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
    0x91251000 - 0x9125afff com.apple.DiskArbitration 2.0.5 /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbi tration
    0x912e0000 - 0x912f7fff com.apple.LangAnalysis 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x91303000 - 0x91370fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
    0x913a0000 - 0x9145ffff ColorSync /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    0x915e0000 - 0x91699fff com.apple.QD 3.4.71 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    0x916f0000 - 0x91728fff com.apple.AE 1.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
    0x91760000 - 0x917f3fff com.apple.print.framework.PrintCore 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    0x9194f000 - 0x9194ffff com.apple.audio.units.AudioUnit 1.3.3 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x91970000 - 0x919befff com.apple.print.framework.Print 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    0x91a40000 - 0x91ab3fff com.apple.NavigationServices 3.3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
    0x91afb000 - 0x91b0bfff com.apple.ImageCapture 2.1.5 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    0x91b30000 - 0x91b44fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
    0x91b60000 - 0x91b6bfff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
    0x91ba3000 - 0x91bbdfff libresolv.9.dylib /usr/lib/libresolv.9.dylib
    0x91bd0000 - 0x91bdffff libPSRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib
    0x91c00000 - 0x91c13fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
    0x92037000 - 0x92052fff libcurl.2.dylib /usr/lib/libcurl.2.dylib
    0x92070000 - 0x92096fff com.apple.FindByContent 1.4 (1.2) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
    0x92170000 - 0x92357fff com.apple.security 2.4 (179) /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x927f0000 - 0x92827fff com.apple.CFNetwork 1.2.2 (7) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    0x9283f000 - 0x92857fff com.apple.WebServices 1.1.1 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
    0x92880000 - 0x92c05fff com.apple.HIToolbox 1.3.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    0x92de0000 - 0x92e30fff com.apple.HIServices 1.4.1 (0.0.1d1) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    0x92e70000 - 0x9336ffff com.apple.AppKit 6.3.10 (743.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x93680000 - 0x93958fff com.apple.CoreGraphics 1.203.30 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    0x939d0000 - 0x939d4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
    0x93a50000 - 0x93a64fff libcups.2.dylib /usr/lib/libcups.2.dylib
    0x93a6a000 - 0x93a84fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib
    0x93bec000 - 0x93ca4fff com.apple.audio.toolbox.AudioToolbox 1.3.4 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x94270000 - 0x94333fff com.apple.DiskImagesFramework 10.3.8 (77) /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
    0x94580000 - 0x9458bfff com.apple.securityhi 1.2 (90) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
    0x94593000 - 0x9459ffff com.apple.help 1.0.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    0x945b0000 - 0x945b9fff libz.1.dylib /usr/lib/libz.1.dylib
    0x94650000 - 0x946affff com.apple.SearchKit 1.0.2 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x94720000 - 0x94721fff com.apple.securityfoundation 1.0 (6) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x94800000 - 0x9488cfff com.apple.ink.framework 101.1.4 (55.12) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    0x94e0b000 - 0x94e1efff com.apple.speech.synthesis.framework 3.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    0x95140000 - 0x951b5fff com.apple.DiscRecordingEngine 2.1.17 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingEngine.framework/Versions/A/DiscRecordingEngine
    0x954c0000 - 0x95ac6fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    0x95b20000 - 0x95df0fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    0x95f00000 - 0x95f20fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
    0x96028000 - 0x960f0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
    0x968d0000 - 0x969b2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
    0x96a04000 - 0x96a6dfff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
    0x96aa0000 - 0x96acefff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
    0x96b50000 - 0x96bdffff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    0x96c00000 - 0x96c67fff com.apple.audio.CoreAudio 2.1.3 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x96cb0000 - 0x96d9efff libiconv.2.dylib /usr/lib/libiconv.2.dylib
    0x96de0000 - 0x96df0fff com.apple.vecLib 3.0.3 (vecLib 3.0.3) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x96ee0000 - 0x96ee8fff libbsm.dylib /usr/lib/libbsm.dylib

  • My back up failed and I get a messageTime Machine couldn't complete the backup to "TimeCap".  The backup disk image "/Volumes/Data/Mary Fleming's MacBook Pro .sparsebundle" is already in use.

    I noticed today that my last back-up was this a.m. and it has tried several times to back up since but I keep getting this message
    Time Machine couldn’t complete the backup to “TimeCap”.
    The backup disk image “/Volumes/Data/ MacBook Pro ."sparsebundle” is already in use.
    I have never had this problem before and don't know what to do. I am not that great around computers so if anyone can help I would appreciate it. I did try to do some research but could not understand any of the content I read. I sure don't know what "sparsebundle" is and this is the first time I ever heard the term.
    If anyone can help woold appreciate it.
    I have Version 10.9.1

    This is a standard issue..
    Been around since LION but you missed out.. !! Well the old rule applies.. there are three types of Mac users.
    1. The bugs have bitten you, and you have done the work arounds.
    2. The bugs are biting you and you are now trying to find out what is going on.
    3. The bugs will bite you. And in the meantime you laugh at everyone with problems and say it must be all their fault. Doesn't happen to my system. 
    You were simply in the last group.. now, with the wonders of mavericks to help, you got bit.
    The solution is simple.. unplug the power cord from the TC .. count to 10.. power up the TC again.
    No luck look at the more technical help.
    C12 here. http://pondini.org/TM/Troubleshooting.html
    Your naming might also be an issue if this continues to happen.. see C9.

  • I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external d

    I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external drive ...could I use windows XP styartup disk just to boot the "17"Powerbook-G4...have no intention of downloading XP on the Mac...just want to boot it up...or is there a way to boot the Mac from the XP desktop...cables...etc?

    Hi Romko23, just pasted info from manual...PowerBook G4 "17"  5.3
    Your PowerBook comes with a minimum of 512 megabytes (MB) of 533
    MHz Double Data Rate (DDR2) Synchronous Dynamic Random-Access Memory
    (SDRAM) installed. Both memory slots can accept an SDRAM module that meets the
    following specifications:
    Â Double Data Rate Small Outline Dual Inline Memory Module (DDR SO-DIMM) format
    Â 1.25 inch or smaller
    Â 512 MB or 1 gigabyte (GB)
    Â 200-pin
    Â PC2-4200 DDR2 533 MHz Type RAM
    PS my keyboad is loose...I tighten the tiny screws...only...once ...tried  all the key-strokes...Comand-option..P-R.....safe-mode... etc...Mac only reacted ...once...right after.. I tightend K-board >>C-OpT- P-R...mac chimed twice...the Apple icon in grey screen got smaller....now after trying ...keyboard .boot short cuts 10 times..nothing...it chimes ...grey screen....apple in window...fan noice ....thats it...do you think I need to tighten screws...again,
    I actually think when I was changing permissions...on entire it was taking so ong...20 min...I just hit power,,shut it down...when it wasn't done...no patience.,...just thought of something ...sounds important...whern I resgisted on this site..I tried to use my Powrbook login name ..got message.... .. blocked...Secury problem....that has to be the problem..blocked..how do I unblock?
    Message was edited by: CMK1

  • "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."  Trying to format my iomega external HD for use with Mac

    Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
    "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
    (Quitting and reopening Disk Utility does not help.)
    The following also appears in Console log:
    *** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
    Workaround
    Quit Disk Utility.
    From the Finder's Go menu, choose Go to Folder....
    Type the following, then click OK: /Library/Receipts
    Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
    iTunes.pkg
    iTunes4.pkg
    You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
    Open Disk Utility and repair disk permissions again.
    Quit Disk Utility.
    Put the removed iTunes receipts back in /Library/Receipts.
    Note: This issue does not affect Disk Utility's verify or repair disk features.
    All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

    i'm just scared i will do something wrong on my own and lose my data.
    You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
    Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
    When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

Maybe you are looking for

  • Firefox will not start and I get firefox.exe Application Error with the code 0x00000000, I've tried reloading but always get the same error message!

    Firefox will not start, I've tried opening in safe mode, no joy. I get the firefox.exe application error 0x00000000 == This happened == Every time Firefox opened == Possibly after a windows update == == User Agent == Mozilla/4.0 (compatible; MSIE 7.0

  • How to exclude tablespace in logical standby database

    Dear all, In which way does the creation procedure of a logical standby database differ than the standard ORA9.2 procedure (http://www.oracle.com/pls/db92/db92.to_pdf?pathname=server.920%2Fa96653.pdf&remark=docindex) if I want to exclude a tablespace

  • Photoshop CS4 crashing on startup

    I've downloaded the trial and when i install and start up it usually does it's thing, but, when it reaches TWAIN Menu Tools it gives me an error report and crashes... here's a screenshot of the error report please help! http://i260.photobucket.com/al

  • MBP won't let me startup- keeps asking for password

    I've been using my MBP for over a year now, no problems. Took it on a trip recently, brought it home, target-Firewired it to my desktop Mac to get files onto the desktop. I went to start it up recently, and now it's asking for a password, and nothing

  • Problem with power plug

    Hey, So I have gone through three power adapters so far due to fraying and I just had to buy a new one. When I plug it in the light usually goes on but it doesn't charge unless I wiggle the plug around and twist it to the side. The power cord is bran