Reload some package from 0fiar_o03 to 0fiar_c03

Hi,
The ODS was loading fine from R/3 but the load from 0fiar_o03 to 0fiar_c03 have two yellow data packages marked . How can I reload the two yellow data packages marked to 0fiar_c03?. Manually put the status to green, is that bad?
Best Regards
Juan

Hi Saven,
"Could you please go to monitor and see the log for the yellow request."
Cant find how... i only see:
Data Package 77 ( 3945 Records ) : Missing messages
   Transfer rules ( 3945 -> 3945 Records ) : No errors
   Update rules ( 3945 -> 3936 Records ) : No errors
      Update ( 0 new / 0 changed ) : Warning received
         Message Missing: End Update for 0FIAR_C03
      Processing end : Missing messages
Regards
Juan

Similar Messages

Install some packages from [testing] repository

Hello Guys,
Could you suggest me how can I install and update from time to time only several packages from testing but not all of that repository?
Have a nice day,
Stas

bangkok_manouel wrote:
There are completely valid scenarii where you can use only few packages from testing (see above, the linux kernel for example). Also, using different libs versions is not a heresy (simlinking is) so there are very few comments in this thread that would have been much more constructive without the condescending tone. Or should we, from now on, consider our fellow users as all dumb in opposition to competent linux users [1] as it has always been ?
[1] http://www.archlinux.org/about/
It is NOT safe to assume that ALL readers are competent. Just browse through the forums every once in a while. Hence care should be taken in giving advise.
This is not a private club, things posted here are read by many competent Arch users and some incompetent as well. Results show up in a Google search. Even though its perfectly valid for me to wash my motherboard in water to get rid of dust, I wouldn't post that advise here without big WARNING tags. This isn't an indication that I assume all users are idiots, but simply that I know there are some who will not understand the 'ifs' associated with such a thing.

How do I tell pacman to now download some packages from a group?

Hi,
If I want to install a group package (oh say... gnome) and don't want all packages (oh say... gnome games) how do I go about telling that to pacman?
thanks

When you run the command "pacman -S gnome" and it asks you if you want to install everything... enter "n" for no.

0fiar_o03 to 0fiar_c03 very very slow

Hi guys,
3 months ago i initialized the 0fiar_c03 infocube the whole processs took 5 hours for 2.051.350 records.... 1 hour in load from r/3 and 4 hours from 0fiar_o03 to 0fiar_c03... but now due a cancelled job in r/3 it took 4 hours from r/3 and 22 hours!!!! from 0fiar_o03 to 0fiar_c03 for 2.077.177
What should i check?
Best regards
Juan

Thanks Ravi for the early reply...
Did you delete DB index of 0fiar_c03 before loading ?? some time index will cause problem ..
Yes i deleted index and agreggates via manage->performance->delete indexes
Did you added any routines recently ?
No
I cant figure what happened
Regards
Juan

Virtual memory exhausted when compiling packages from AUR

Recently I've seen this error more and more often. When I tried compiling some packages from AUR, I ended up getting "virtual memory exhausted" error. The first time it happened with clementine-git, then android-studio. Can I do something about it?

I am also facing the same problem. I am trying to install a package, and the installations aborts saying 'virtual memory exhausted'. The RAM is 2 GB and i have alloted 2 GB as swap. Things i have tried so far
-install using yaourt
-install using makepkg.
-change TMPDIR to HDD.
Even when i tried it without any window manager to start, limiting the RAM usage, the problem still persists. The only way is to allot an extra swap space, but that would mean that i will have to delete a partition, which is not a feasible solution. Is there anything else one could do. ?
if it helps,
ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 20
file size (blocks, -f) unlimited
pending signals (-i) 16033
max locked memory (kbytes, -l) 64
max memory size (kbytes, -m) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 16033
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited

Scrobble to last.fm from mplayer? Is it posssible with some package?

I started using mplayer for playing mp3s. Is it possible to scrobble to last.fm from mplayer with some package like mpdscribble?
Thank you
Last edited by hariskar (2013-03-23 19:48:23)

Then please do everyone a favour and mention that in your post.
Your thread title is also misleading. The link that I provided makes it clear that it is possible to scrobble mplayer tracks, just that you want something simpler (although how that script could be simpler is a separate argument)...
Please read How To Ask Questions The Smart Way

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
I have iPhoto version 9.1.5 (615)
Mac OS X version 10.6.8
I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
Any help would be greatly appreciated

Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

Execute SSIS Package from JOB which contains Execute Process Task calling a .bat file

Hi All,
I have a EXCEL Macro needs to be called from SSIS. We could not use Script task because of some internal reason.
So we have taken an approach to call a .BAT file using Execute Process Task. This .BAT file will call a .VBS file which will execute the EXCEL Macro.
The SSIS Package is running good if I execute the package from BIDS.
But the real problem is with the scheduling this SSIS Package using SQL JOB.
If i execute this SSIS package from SQL Server Job, its executing the whole package successfully except the Execute Process Task.
So the overall issue is SQL Server Job is not executing properly if I call any .BAT file from the SSIS Package.
Please give me suggestion to get rid of the issue. Thanks in advance.

Hi Sai.N,
If you run the SQL Server Agent job manually from SSMS, does the package execute properly? If the package executes properly when you run the job manually, the issue should occur due to permission issue. In this case, I suggest that you create a SQL Server
Agent proxy based on the current Windows account which you use to log onto the operating system, and run the job under the proxy account.
If it is not the issue, please enable logging in the package as Visakh mentioned and post the warning/error message for further analysis.
Regards,
Mike Yin
TechNet Community Support

Ipod classic has been wiped. cannot see it on the 'device list' in my itunes. I have tried restoring to factory settings and reloading...it reloads some of the music, but when I plug the Ipod back in, it wipes it again.

Ipod classic has been wiped saying 'no music'etc.
Cannot see it on the 'device list' in my itunes. I have tried restoring to factory settings and reloading...it reloads some of the music, but when I plug the Ipod back in, it wipes it again. Ocassionally Itunes freezes when I plug in the Ipod.

Make sure your headphones are plugged in all the way, meaning you cannot see any of the silver still showing from the headphone's plug.
A feature of the Nano is to put it to sleep when the display goes out and it does not detect any headphones.
B-rock

What are the steps to reload my MacBook from a Time Machine back up on a external HD.

Before I upgraded my MacBook to Lion I first used Time Machine to back the OS using a external HD. Not being satisfied with the Lion OS
I want to revert back to the Snow Lepopard. What are the steps to reload my laptop from my external HD?

I tried this but my external drive is not appearing for some reason. Although it is accessible through finder.
Is ther perhaps another way of doing this??
Your help is massively appreciated!!

How to install packages from local folder

Hi all,
I have downloaded all arch linux packages from the following URLs:
ftp://mirrors.kernel.org/archlinux/core/os/i686/
ftp://mirrors.kernel.org/archlinux/extra/os/i686/
ftp://mirrors.kernel.org/archlinux/community/os/i686/
and then have saved them to an external hard disk. Then I have attached that external hard disk to my system and packages are available in following folders:
/mnt/external_hd/Arch_Linux/Core-OS/
/mnt/external_hd/Arch_Linux/Extra-OS-1/
/mnt/external_hd/Arch_Linux/Extra-OS-2/
/mnt/external_hd/Arch_Linux/Community-OS-1/
/mnt/external_hd/Arch_Linux/Community-OS-2/
/mnt/external_hd/Arch_Linux/Community-OS-3/
Now I want to install some or all packages from these folder with the help of pacman command. I am seeing that package corresponding to wvdial command is available in the /mnt/external_hd/Arch_Linux/Extra-OS-1/ folder. But how to use pacman command so that I can install wvdial package from that folder?
In addition to this if I want to install ALL Extra Packages available in the folders /mnt/external_hd/Arch_Linux/Extra-OS-1/ and /mnt/external_hd/Arch_Linux/Extra-OS-2/ then how to execute the pacman command?
Please send me step by step instructions so that I shall be able to install some or all downloaded packages.
I shall remain thankful for this forever.
Best Regards ...
Pankaj Kumar

Hi fukawi2,
Thanks for reply and searching for my username on google. It is true that I am a freelance s/w developer but I am not installing Arch Linux for any client. I am installing it due to some other reasons. In fact I started working on Red Hat and then on Fedora when I was a student of bachelor degree course in computer applications. Then later I searched open suse and started using it. I am using open suse from its 10.1 version. However the recent version of this distribution has become much resource consuming. So I am in the need of a light weight linux distribution. And I encountered Arch Linux. Then I purchased its installation disk from an online shop and installed it on my system. But only text mode is working at this moment. Since I want to use X window and so I started to follow the syntax of pacman command. But it is connecting to internet. Since my internet connection is slow (average speed of 10kbps) and so I requested the same online shop to download all packages from Arch Linux repository and send them to me. Therefore now I am having all those packages in my local external hard disk drive in the folder mentioned in my first post. Now I want to install packages from these folder. And so in order to get help I have come to this forum.
I have also followed the steps given on the pages https://wiki.archlinux.org/index.php/Pa … l_commands and https://wiki.archlinux.org/index.php/Pa … repository. But when I am trying to install a particular package using the following command:
pacman -U wvdial
then it is asking for a dependency. I know that the dependent package in my local folder but why it is not being automatically taken by pacman command? Can you please explain it.
That is why I am asking help only for customization and usages of pacman in order to install packages from local folder. But each member in this forum is only referring to long written manuals and not giving me exact solution which I think will involve four/five steps.
Best Regards ...
Pankaj Kumar

During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
Issues 1) playbook wont connect to desktop manager anymore
2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account.
3) my Phone when connected to desk top software shows the calendar as read only
4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies."
I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!!
someone please help me. !!
I know you are going to ask I have updated everything last time and it is all as update as it can get.
As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts

Did you try to eboot the your PC or laptop where your device is connected ?
I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

Running 5.5 U2e and VUM will no longer download software packages from patch source?

We had a vSphere 5.5 cluster configured for us by a 3rd-party through Dell as part of our purchase agreement. We are running vCenter Server 5.5 U2e on Windows 2012 R2 as a physical host. It does run Update Manager. In my most recent check today, Update Manager will scan a host and report patches that are needed. In this case we're at 5.5.0 Build 2456374 on our ESXi hosts. Update Manager detects 5 missing patches. After I put the host in maintenance mode, I remediate, select the patch group, and proceed through the screens. It starts its process and goes from 0% to 16% to 25% then sits there for about 1–3 minutes, then goes to 90%, 91%, and errors out saying:
"Cannot download software packages from patch source. Check the events and the Update Manager log for download details."
Multiple strange things:
This server was updating just fine a few months back when some previous patches were released.
It can see the internet just fine. No firewall issues.
Our failover site on the same network, but in a different location in the city is able to update just fine. Same hardware, network, and software versions.
Any ideas on where to look or what to try? I had gone ahead and update from vCenter Server 5.5 U2b to U2e (along with a VUM reinstall) hoping that would fix it, but it did not. Any help would be greatly appreciated, because we're not VMware experts and thought everything was set up correctly by the vendor. We were given a small amount of knowledge transfer, but nothing that would allow us to troubleshoot this.
The Update Manager config listed in vCenter Server points to just three sources, that look to be the default from hostupdate.vmware.com and vapp-updates.vmware.com. None of the settings have been changed from the initial install and configuration that were working at one point in the last few months (when I last patched the hosts to 2456374).
Looking through the vmware-vum-server-log4cpp.log I see these failures:
[2015-05-06 16:17:33:039 'JobDispatcher' 6068 DEBUG] [JobDispatcher, 405] The number of tasks: 11
[2015-05-06 16:17:38:642 'DownloadMgr' 2448 DEBUG] [downloadMgr, 545] Url: https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib, Download destination: C:/ProgramData/VMware/VMware Update Manager/Data/hostupdate/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib
[2015-05-06 16:17:38:642 'DownloadMgr' 2448 DEBUG] [downloadMgr, 396] Inserted download job {45798736} to queue
[2015-05-06 16:17:38:642 'DownloadMgr' 2448 DEBUG] [downloadMgr, 416] Current download count: 0
[2015-05-06 16:17:38:642 'DownloadMgr' 2448 DEBUG] [downloadMgr, 432] Current download count: 1
[2015-05-06 16:17:38:642 'DownloadMgr' 2448 DEBUG] [downloadMgr, 438] Adding download job {45798736} to scheduler
[2015-05-06 16:17:38:642 'DownloadMgr' 2448 DEBUG] [downloadMgr, 458] Waiting for download job {45798736} to finish...
[2015-05-06 16:17:38:643 'DownloadMgr' 6364 INFO] [downloadMgr, 593] Executing download job {45798736}, url=https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib
[2015-05-06 16:17:38:644 'httpDownload' 6364 INFO] [httpDownload, 556] Downloading https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib
[2015-05-06 16:17:39:501 'httpDownload' 6364 INFO] [httpDownload, 791] Status code: 404
[2015-05-06 16:17:39:501 'httpDownload' 6364 ERROR] [httpDownload, 827] Error retrieving document 'https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib'. Status code: 404
[2015-05-06 16:17:39:502 'httpDownload' 6364 WARN] [httpDownload, 420] Download https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib failed: Error retrieving document 'https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib'. Status code: 404
[2015-05-06 16:17:39:502 'httpDownload' 6364 ERROR] [httpDownload, 435] Reached retry download limit
[2015-05-06 16:17:39:503 'DownloadMgr' 6364 ERROR] [downloadMgr, 618] Executing download job {45798736} throws error: Reached retry download limit
[2015-05-06 16:17:39:503 'DownloadMgr' 6364 ERROR] [downloadMgr, 705] Download failed for url: https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib
[2015-05-06 16:17:39:503 'DownloadMgr' 6364 INFO] [downloadMgr, 567] Download job {45798736} finished, bytes downloaded = 0
[2015-05-06 16:17:39:503 'DownloadMgr' 2448 DEBUG] [downloadMgr, 464] Download job {45798736} finished
[2015-05-06 16:17:39:503 'DownloadMgr' 2448 DEBUG] [downloadMgr, 477] Removing download job {45798736} in queue
[2015-05-06 16:17:39:503 'DownloadMgr' 2448 DEBUG] [downloadMgr, 496] Current download count: 0
[2015-05-06 16:17:39:504 'HostUpdateDepotManager' 2448 ERROR] [vibDownloaderImpl, 402] Error downloading vib file from https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib Error:downloading file: https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib failed, 0 bytes downloaded.
[2015-05-06 16:17:39:504 'HostUpdateDepotManager' 2448 ERROR] [vibDownloaderImpl, 418] Downloading file failed for: https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib
[2015-05-06 16:17:39:504 'HostUpdateDepotManager' 2448 WARN] [vibDownloaderImpl, 440] Failed to download 1 VIBs:
https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib,
[2015-05-06 16:17:39:504 'HostUpdateDepotManager' 2448 ERROR] [patchDepotManager, 466] Failed to download the vibs: https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/vib20/esx-base/VMware_bootbank_esx-base_5.5.0-2.62.2702864.vib
[2015-05-06 16:17:39:504 'HostUpdateDepotManager' 2448 ERROR] [installController, 349] Install on host: <HOST FQDN REMOVED>(Entity: host-16) failed. Error: Failed to download Vibs
[2015-05-06 16:17:39:548 'SingleHostRemediateTask.SingleHostRemediateTask{29}' 2448 ERROR] [singleHostRemediateTask, 492] Remediation error: Failed to download Vibs
[2015-05-06 16:17:39:571 'VciTaskBase.VciClusterJobDispatcherTask{25}' 2448 INFO] [vciClusterJobSchedulerTask, 613] Remediation failed due to non mmode failure

Well, apparently this patch / vib was pulled after release, based on issues with "VMware NSX for vSphere 6.x or Cisco Nexus 1000v" as seen in KB2116370: VMware KB: After upgrading to VMware ESXi 5.5 Patch Release ESXi550-201504002, virtual machines using VMware NSX for…
Ok, that's cool. But here's my question then. Why is Update Manager still reporting that it's an available patch for our ESXi hosts? I'm new to this and am just trying to get an understanding to avoid confusion like this in the future.
[UPDATE]
Looks like this was the problem. VMwareCares Twitter account confirmed that Update Manager needed a new repository query to grab the new metadata. After rescanning the ESXi host again, the number of available patches dropped from 5 to 1. I'm now successfully patching the ESXi hosts through Update Manager once again. Crisis avoided.

Import package from one project into another

Hello everyone,
I have some projects.
An enterprise and war project created in netbeans.
I would like to use some files from one project to another. when I import
the package I get the error-
'package x does not exist'
I have added the package to the project but I still get the error.
I have also added the project to import to my glasspath but still.
E.g.
set classpath
.;c:\enterpriseA;
My next idea is to create a war project into my enterprise project and copy the files
from the war project into it in order to use it. But I'm sure there is a better way.
THanking you in advance.
eve
Edited by: evepokua on Nov 22, 2009 1:44 PM

One mistake I keep making is that I don't add the package to the
Dependencies of the plugin I'm writing. You have to go to plugin.xml,
and add the package you depend on to the Dependencies section. Maybe you
didn't do this?
Michael
nasti wrote:
> Hello everybody!
> I am new user of osgi and eclipse. I tried to do some of Oscar examples
> but I had some problems. Namely, the problem in import of package from
> one project into another in Eclipse.
> I add first project to the Build Path of the second one.
> I add to the first project manifest line: Export-Package example2.service.
> I add to the second project manifest line: Import-Package example2.service.
> But when I tried to execute these bundles the
> java.lang.NoClassDefFoundError was occurred. May be you will help me
> with this problem.
> Thanks....
>
>

Reload some package from 0fiar_o03 to 0fiar_c03

Similar Messages

Maybe you are looking for