Reloading a 3500XL with Text File

How do I clear the config and reload the switch with a text file? I have the file ready to go but can't figure out how to get it to take. Any help would be appreciated. Thanks.

Erase startup
reload
N Don't do the config!
enable
copy and paste the text file
ATTENTION do NOT paste from a Wordprocessor like MS-WORd, they add all the ugly control codes(especially fun at the password!)

Similar Messages

How to create a mapping with text file as my target

I need to create a mapping with source as a table and target as a text file.
I am using OWB 10g R2. with database Oracle10g.
Any one can help me to create a mapping with a text file as target.

Hi,
just create a File-Location and File-definition and use this file-operator as target object inside your mapping.
Regards jwehner

Email with Text File Attachement as Source

Hi All,
One of my interfaces needs to listen to incoming mails with an text file attachements.I wish to know how we can convert the text file contents into XML to further process it on the reciever side.

Hi,
To perform content conversion of a flat file, check these blogs,
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Also, to understand file content conversion better, you can check this link on SAP Help,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards,
Bhavesh

Michel: sync gtasks with text files

I wrote Michel, a gtaks-to-text-file synchronizer. Michel is your friendly mate that helps you managing your todo list. It can push/pull flat text files to google tasks.
Right now, it features two commands:
michel pull
prints the default todo list on the standard output
michel push <TODO.txt>
replaces the default todo list with the content of TODO.txt
Of course you need a gmail account to make it work. It uses oauth, so when you start it the first time, it will give you an url to visit and you'll have to give access to the app, then it will save a token and won't ask next time. If you want to delete the token, it is stored in $XDG_DATA_HOME/michel/oauth.dat.
The code is on github. As usual comments and patches are welcome...
Last edited by duquesnc (2011-09-23 21:28:56)

Oh, I have to add that currently, the package won't build correctly. That is not due to the python2-google-api-python-client package which does not set the rights correctly. A quick and dirty fix is to
# chmod +r /usr/lib/python2.7/site-packages/google_api_python_client-1.0beta4-py2.7.egg-info/top_level.txt
I notified the owner of python2-google-api-python-client of the correct change to do.
Last edited by duquesnc (2011-09-23 21:26:35)

Domain Value Mapping with Text file

Hai,
I have done the Domain value mapping with the xml file to xml file and it is working fine.
But in the case of Text file to Text file it is not working i.e. If the citiname is the
first field it is domain value mapping and working fine.
INPUT:
Erode, Mahes, 22
Coimbatore, Veera, 22
OUTPUT:
ED, Mahes, 22
CBE, Veera, 22
But if I change the Citiname to the second column it is not working the problem is
it is not working for subsequent columns.
INPUT:
Mahes, Erode, 22
Veera, Coimbatore, 22
OUTPUT:
Mahes,, 22
Veera,, 22
The input Text files are delimited by "comma" and optionally enclosed by "space".
Does anyone have attained the DVM in the Text file successfully.
Please help me.

Thank you for the reply Abhi
Text to Text means instead of giving the input file as XML file i am giving the input as a simple .txt file and I also want the output in the .txt format.
For the text file only it is not working fine in the xml file to xml file it is working fine.
For your another query I am not providing the correct parameters for "lookup-dvm"
I am giving the xsl file
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="TextInput1.wsdl"/>
<rootElement name="Root-Element" namespace="http://TargetNamespace.com/TextInput1"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="TextOutput1.wsdl"/>
<rootElement name="Root-Element" namespace="http://TargetNamespace.com/TextInput1"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:ns0="http://www.w3.org/2001/XMLSchema"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:imp1="http://TargetNamespace.com/TextInput1"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/TextInput1/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/TextOutput1/"
exclude-result-prefixes="xsl plt pc ns0 jca imp1 tns hdr ns1 bpws ehdr hwf xp20 xref ora ids orcl">
<xsl:template match="/">
<imp1:Root-Element>
<xsl:for-each select="/imp1:Root-Element/imp1:Leaf-Element">
<imp1:Leaf-Element>
<imp1:C1>
<xsl:value-of select="imp1:C1"/>
</imp1:C1>
<imp1:C2>
<xsl:value-of select='orcl:lookup-dvm("Citinames","Long",imp1:C2,"Short","")'/>
</imp1:C2>
<imp1:C3>
<xsl:value-of select="imp1:C3"/>
</imp1:C3>
</imp1:Leaf-Element>
</xsl:for-each>
</imp1:Root-Element>
</xsl:template>
</xsl:stylesheet>
Here I am checking the DVM function for the Second column and it is not working and I have given their Inputs and Outputs in my first message .
I have another question as you told both import and export of the DVM is always in the XML format only so I have a doubt whether the lookup-dvm will be working for xml files only and not for text files.
But in my case in text file it is working for the first column but not in the subsequent columns.
Thanks.

Prepare List with text file fields

Hi,
This is rama krishna. I need to convert text file fields to a List.
My requirement is to read a text file and prepare one list depending up on the fields.
For example I want to read the following foollowing text fields into list(it may be list or linked list).
<b>
Invoice Number voice Date Voucher ID Gross Amountount Available Paid Amount
51169 Nov/17/2005 00538767 7,043.23 0.00 7,043.23
51275 Dec/14/2005 00542544 929.87 0.00 929.87
601001 Jan/08/2006 00542545 1,837.14 0.00 1,837.14
Vendor Number Check No Date Pay Amount Total Discounts tal Paid Amount
21C029 218534 Jan/19/2006 $9,810.24*** $0.00 $9,810.24</b>
I want Vendor number as on list to that list I want add
Invoice nos lists.
Thanks & Regards
Rama Krishna

Hi, Rama!
Unfortunatly it' s beyond the scope of this forum to give that detailed advice on basic java se techniques like opening a file input stream and working with collections.
Please refer to the suns standard documentation on file i/o and collections for detailed information on that.
If you' ve any additional questions on more SAP specific problems, don' t hesitate to ask!
Regards,
Thomas

Compare with text file

Is it possible to do a line by line compare with the data in a text file and print the required data?
BufferedReader readCode = new BufferedReader(new FileReader("code.txt"));
String code = readCode.readLine();
while(more) {
System.out.print("Code:");
String productCode = in.readLine();
while (code != null){
     code = readCode.readLine();
     if (!(productCode.equals(code) || productCode.equals(code) || productCode.equals(code) ||productCode.equals(code) || productCode.equals(code) || productCode.equals(code) || productCode.equals(code) || productCode.equals(code))){
     // Goes back to the next loop interaction. Skiping the rest of the loop below
     System.out.println("Invalid product code. Check the product code again");
     continue;
productTemp[j] = productCode;
do{
     /*Keep asking for a quantity until some valid value is entered
     System.out.print("Quantity[0-100]:");
     productQuantity = Integer.parseInt(in.readLine());
}while(productQuantity > 100 || productQuantity < 0);
quantity[k]=productQuantity;
totalQuantity = quantity[k] + totalQuantity;
j++;
k++;
noOfItems++;
}     i cant seem to compare the user input code with the code in my textfile.i am stuck here...can somebody enlighten me?

nvm...thanks for ur help anyway..i try others
ways..save ur remarks for other pplThis is a public unmoderated forum. If you don't want remarks, don't post.
Besides, if you're not willing to describe your problem in better detail, what kind of "help" do you expect? It's not like you've entered a forum full of psychics. Your problem is unclear. You've been given suggestions. If you have a more specific question, feel free to ask. Otherwise, feel free to continue floundering about.
Good luck.

Help required with text file handling in GPIB

Hi attached is my vi for GPIB communication with Aginelt Network Analyzer in Labview 8.
I'm saving the data of network analyser into text file(appending all the data). I wish to make some changes into it. As can be seen there is a input which asks for number of points/segments. Supposed I give that input as 201 points(it can be 401,801,1601,51,etc.) than after every 201 points data should get appended into a new coloumn and not into 202 row. Seperate coloumn should start for the whole set of 201 points, where as currently what is happening is all the data is getting appended one below the other.
Can anyone help around,
Regards
Attachments:
finaltemp.vi ‏52 KB

Here...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
finaltemp(80).vi ‏52 KB

Servlet combination with text file ...

hai dude , i wanna ask some a terrible question
may be you can help me with this ...
i made servlet admin for loggin into system , but in this case
i used text file not database (sql,or else) .
for example i have admin.txt and contain :
admin myadmin
admin refers to username and myadmin refers to password
can you guys show me a little program servlet that i can learn
and study about login with servlet !!!!!!

Should be something like this:
public class theServlet extends HttpServlet
private Hashtable namePassword = new Hashtable();
public void init(ServletConfig config) throws ServletException
super.init(config);
try
     BufferedReader br = new BufferedReader(new FileReader("admin.txt"))
     String line = "";
     while ((line=br.readLine())!=null)
          // getting data from the lines
          // every line have to be the form: username password
          StringTokenizer stk = new StringTokenizer(line);
          namePass.put(line.nextToken(),line.nextToken());
     br.close();
catch (Exception e)
     e.printStackTrace();
public void doGet( HttpServletRequest req, HttpServletResponse resp )
throws ServletException, IOException
resp.setContentType("text/plain");
PrintWriter out = resp.getWriter();
     // the calling html-page have to have a form with the textfields username and password
     String username = req.getParameter("username");
     String password = req.getParameter("password");
     if (((String)namePassword.get(username)).equals(password))
          out.println("Login OKAY!");
     else
          out.println("Login failed!");
} // End doGet

Java with Text file

Hi
I'm new in Java , just start 2 week agao, I want to read data for text file ...
Argentina | Armenia | Australia | Austria | Azerbaijan |
Canada | Cape Verde | Central African Republic | Chad | Chile | China |
I will use " | " to separate a string and to parse this string to array.
I have seen some the sample use : StringTokenizer but I didn't get about it
can you give me more information or short code

Sample code here: http://www.ccs.neu.edu/course/com3118/util2.html
You could also use String.split()

Receiver mail with text file attached without line feeds

Hi, friends
I have a text file to mail scenario, where file must be attached to receiver mail.
Receiver CC mail is protocol XIPAYLOAD and use mail package and keep attachment.
In tab module, i have:
Module name --> SAP XI Sample/ConvertCRLFfromToLF
Module configuration --> mode LFtoCRLF
The plain text file is attached to mail but there are no line feeds after the plain text lines.
Thanks, in advance

Stefan,
This is not a Java mapping, it's an ABAP mapping.
I've tryed also to insert this characters, but without success.
In my abap class i have:
data: l_newline type c value cl_abap_char_utilities=>newline.
data: l_linefeed type c value cl_abap_char_utilities=>CR_LF.
clear wa_string.
incode = idocument->get_elements_by_tag_name( 'linea' ).
length = incode->GET_LENGTH( ).
do length times.
    outcode = incode->get_item( index = d_lines ).
    wa_linea = outcode->get_value( ).
    if wa_string is initial.
      wa_string = wa_linea.
    else.
      concatenate wa_string l_newline l_linefeed crlf wa_linea into wa_string.
    endif.
    add 1 to d_lines.
enddo.
l_element_dummy = l_document->create_simple_element(
                name = 'Content'
                VALUE = wa_string
                parent = l_element_root ).
so...it's similar to your suggestion..
Any other input, please?
Regards,
Carme.

Problem with Text file attachment

Hello All,
I am sending data from my program via mail in an attachment of text format in 4.6C. But the format of the data in the attachment is not correct. There is no line break in the data.
I've tried putting the line break manually by using hexadecimal code '09' as the line break. But it is not working.
Kindly suggest.
Thanks

Hello Brad,
I marked the problem as solved previously because the issue of all the lines coming together was solved.
So, I marked the question as solved.
Now, I have a different problem and rather than creating a new thread I opened this one only.
Thank you

Getting source codn with TEXT file

Hi everyone.
I have a question about to get a source code using some kind of function or class. In case of report program coded in ABAP, I can get using "read report ... " In case of BSP,However, I don't know how. Anyone who knows the method lets me know please.
Regards,
Jongone.

Welcome to SDN.
Check out the following article by Eddy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap-code-samples/bsp/abap code sample for download of a bsp application.pdf
Regards
Raja

How to Test, Inbound idoc ,with out the Sender System, using a Text File

Hi Guru's .
we wanted to test BLAORD03 inbound idoc (Message Type BLAORD).with out the SENDER SYSTEM.
on the same client.
we wanted to test this idoc with text file from our local machine.
Can anyone give us detail steps.like how to create File layout
with Segment name,and values for the fields.how to pass this file to the system.
Thanks in advance.

Hi Aparna.
My requirement is to test the idoc with Inbound File.
Generate a file with the data entered through segments through we19 ,and use the same file for processing through we16.
when i am trying to do this syst complaing about
Partner Profile not available, and some times
port not available. and some times with
'No further processing defined'.
but i maintained part profiles and port perfectly.
Can you help me in testing with test 'File' port.

Write into existing file with "write to text file"

Hi all,
I have a text file that contains several lines of data (text). Now I would like to replace the first three lines with text coming from a string array.
My approach is shown in WriteToFile.vi that is attached.
When I am executing this vi (with an empty file), everything seems to be working fine in the first place.
The file will contain the following text:
oneoneone
twotwotwo
threethreethree
Now, when the third element in the array is shortened (lets say to "threethr") before execution, the file will contain the following text:
(the file was not emptied before execution)
oneoneone
twotwotwo
threethr
three
How can I avoid the last line being written? I have made many tests and I could not find a solution.
One more example:
Lets say we have an existing file, inside this file is:
oneoneone
twotwotwo
three
fourfourfour
Now I would like to overwrite line three with "threethreethree". Therefore I execute my vi as shown in the attachment.
What I get as a result is:
oneoneone
twotwotwo
threethreethree
ur
So, the text in line four, which should not be touched, is "ur" instead of "fourfourfour".
Any idea to solve this problem?
What I basically need is replacing a line of a text file in a conveinient way.
Thanks,
Holger
LV 8.5.1
Attachments:
WriteToFile1.jpg ‏17 KB
WriteToFile.vi ‏11 KB

The remaining fourth line is there because the third line has a <nl> at the end. You have not emptied the file so the rest of the file will be kept. This is because your line is shorter.
In the scond example the third line is longer and it will overwrite the beginning of the fourth line.
Files aren't organized in lines they are oganized in bytes. And what you write are bytes to the file even with text files.
Replacing a single line in a file is done by reading the file line by line. All unchanged lines are written to a temporary file and the line with the new text will be written instead of the original line to the temporary file. When the writting is done rename the original file, then rename the new file into the original file and then delete the renamed original file.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Reloading a 3500XL with Text File

Similar Messages

Maybe you are looking for