Reloading the same slide that you are currently on

Hi Guys,
As part of a large presentation, i have several slides that can be needed at any time and sometimes multiple times for each slide. Each slide starts as a blankl screen then has a word that appears, holds, then dissapears returning to a blank holding screen all as part of one slide and all automatic as soon as you trigger that slide. It all works great apart from now in Keynote 3, it seems that it will not rerun a slide if it is already in that slides finished state. ie if you run slide 3, then when it has finished hit "3" and "return," nothing happens. It used to work fine in Keynote 2.
Any Ideas
Many Thanx,
Mr.B.
17 Inch Macbook Pro, 2.16Ghz, 2GB Ram Mac OS X (10.4.7) and it runs XP!

I've tried this and yes it does do what i want but not how i want to do it. I don't want to see a hand anywhere on the screen.
If i have to use it this way is there anyway to invisibly trigger the hyperlink, ie by another key press or something.
It's really annoying when Apple have something working fine in one version, I upgrade to go with my nice new MBP and now it doesn't work. Taking functionality away is not good.
Thanx again in advance for any other suggestions
17 Inch Macbook Pro, 2.16Ghz, 2GB Ram Mac OS X (10.4.7) and it runs XP!

Similar Messages

Blackberry 10 the data isn't compatible with the version of the device software that you are currently running

Hi,
my update to 10.3.1.1565 messed the handwriting input up on my phone. so I tried to downgrade to 10.2.1, upon doing so all my files were wiped, however I thought I was being smart by doing a complete backup this morning while running 10.3.1.1565 prior to attempting the os downgrade to 10.2.1 using BlackBerry Link,
Anyway I had to restore my device back to 10.3.1.1565 and now when I attempt to do a restore using the .bbb ( backup ) which I created earlier on today i.e getting the following error message:
blackberry 10 the data isn't compatible with the version of the device software that you are currently running
the software versions on my phone now and the software version when I did my backup are exactly the same 10.3.1.1565. I'm able to restore my user files and apps ect, as it offers to do a partial restore,., but my contacts, and remember files are now gone. I NEED THESE. how do I get these back..
please help..
Thanks,
GeoYeo - Free Local classifieds - Built for Blackberry 10, if you like it please Rate It and Share it!
Solved!
Go to Solution.

Hi,
I figured it out. so I figured I would post. Apparently BlackBerry pulled the 10.3.1.1565 update. anway not sure what happened butI ended up usng Shenshi and grabbing an update from a different carrier, upon doing so I am now able to do a complete restore using my old BBB file,
GeoYeo - Free Local classifieds - Built for Blackberry 10, if you like it please Rate It and Share it!

Room. All of my photos are filed as Events. Is it possible to back them up in such a way that they are kept in the same Events that they are currently stored?

I use iPhoto and iMovie and I want to safely take the media off my Mac Air (to give me more space) and store it for future use. All of my photos are stored as "Events". Is it possible to store them on an external NAS drive in such a way that they are kept in the same Events folder that they are currently stored so that I can, in the future, reload them onto the Air in the same Events folder? I really do not want to have to create and name folders for thousands of photos!
Your help is appreciated!

Easiest solution: move the Library to an external disk:
Make sure the drive is formatted Mac OS Extended (Journaled). Note: you cannot use a NAS for an iPhoto Library.
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

I am unable to connect to the internet, there is a pop-up that says "We're sorry, but the Safari browse version you are currently using dos no support the community toolbar". My computer does say that it is connected to the internet until I open Safari.

I am unable to connect to the interent. At the top of the screen my computer says that I am connected. When I open up Safari there is a pop up that say "Community Toolbar We're sorry, but the Safari browser version you are currently using does not support the community toolbar" and when the Safari page opens up it says "You are not connected to the Internet. Safari can't open the page .... because your computer isn't connected to the Internet." I have tried Network Diagnostics and tried to reset Sfari, empty Cache as well as deleted all of my interent history. I am unable to use Time Machine because I never set it up. If someone knows how to help I would very much appreciate it!!

Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

I am trying to apply for a job on line and I am receiving this message t has been determined that you are currently running a "Popup Blocker". In order to continue, please allow this site from within your "Popup Blocker" preferences. How do I fix this?

Hello,
I am trying to apply for a job on line and I am receiving the following message "
t has been determined that you are currently running a "Popup Blocker". In order to continue, please allow this site from within your "Popup Blocker" preferences
How do I correct this??
Thanks!

Open Safari preferences, click on the Security icon in the toolbar, uncheck the pop-up blocker option.

I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."

When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar." I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
Thank you

See this link.
Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).

Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes

Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes / Remote?
I know this can be achieved by the remote app.
Airplay functionality appears only to support 1 set of speakers at a time?

Hockeyfanatic wrote:
Does anyone know how or if it's possible to stream my music from the iPhone to iTunes via bluetooth or wifi? Essentially I want to share the iPhone's library with iTunes (I know one can go the other way).
Here's why: I'd like to stream my music at work to my computer's speakers without taking the phone out of my pocket. I obviously don't have my home music collection on my company computer. And I figure if I place the phone on my desk to plug it in and play through iTunes, I could easily walk off without the phone. That would be bad (out of contact) and potentially sad (stolen).
It seems right now the only bluetooth connection to a computer is for the remote application.
Wait until November. Airplay/Airtunes iOS 4.2 announced for iPhone to iTunes/iTV. If you want a BT audio stream now, you can add a dongle to the PC for headset streaming.
As far as WiFi file transfer iPhone to iTunes, you can't. There's talks on it but nothing concrete. Except JB.

To reset using laptop do you use the same cord that you use to charge with USB?

need to reset Ipad. What cord do I use to connect to laptop?

Yes, that is the correct cable to use. It's the same one that you use to connect to the charger block.

Secure zone - ERROR: The payment gateway that you are using does not support recurring payments

So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
The only way I have found is to sell membership to a secure area where the files are linked.
When I create the secure zone, I want a one-time-fee, but the system says:
"ERROR: The payment gateway that you are using does not support recurring payments"
The payment isn't recurring!
Micah

"Note that you have to use seamless gateway to process such payments."
Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error. Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
Micah

I got this error "The LOV relation that you are trying to add is invalid"

Hi to all,
Actually i create lov programatically and i used external LOV, while mapping
i used this code
idbean.setLovRegion("/.../.../.../.../..../......./lov/webui/",0) //path of the external lov RN
idbean.addLovRelations(pageContext,"OpId","Ouid",LOV_RESULT,LOV_REQUIRED_NO); //mapping
idbean.addLovRelations(pageContext,"OpId","Ouid",LOV_CRITERIA,LOV_REQUIRED_NO); //mapping
but i got this error The LOV relation that you are trying to add is invalid.
Anyone knows let me know the soluting.. This is Urgent
Thanks in Advance
Senthur

Hi senthur,
I don't know your exact requirement and Why you are making Lov programtically. It's quite tough for new bie.
What I can advise you that Create a New Lov in Jdev [Only Lov] and attach this Lov to any page with the help of personalization.
Thanks
--Anil

I keep getting an error message that says the safari browser version you are currently using does not support the community toolbar. how do I fix it?

Everytime I open my imac I get an error message that says: "We're sorry but the Safari browser version your are currently using does not support the community toolbar." I can't see where it affects anything else, but getting an error message on an imac, just doesn't seem right, ya know? How can I get rid of the message.

Apparently an add-on named Community Toolbar was installed at one time, and is causing the problem. To get rid of it, quit Safari, then throw away these files -
Macintosh HD/Library/Application Support/Conduit
Macintosh HD/Library/InputManagers/CTLoader
Macintosh HD/Library/Receipts/ctloader.pkg
Macintosh HD/Library/Receipts/<Toolbar name>.pkg
Macintosh HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
Macintosh HD/Users/<User name>/Library/Application Support/Conduit
Note - if you are using Lion, the Library folder in your home folder (user name folder) is hidden. To get into it, in Finder open the Go menu; with that menu open, press and hold the Option key. An item "Library" will be added to the list, and can then be selected. That will open the Library folder in your home folder.

I have just installed Firefox 6, and Rapport no longer works - the same problem that you had with Firefox 5. What is happening?

You prompted me to install Firefox 6 this evening, as it addresses serious security/stability problems, but when I did this, the Rapport icon vanished from the address bar. Reinstalling the current version of Rapport has not fixed this.
The same thing happened a few months ago with Firefox 5, and it took Rapport a week to develop a new compatible version.
Why has this happened again? Do you not check this before launching new versions? Or, why at the very least do you not warn us beforehand that some programs will not work for X days? I'd prefer to be without the latest Firefox for a week or so rather than without Rapport - not least because my bank requires me to use Rapport.
Please advise ASAP.
Malcolm Oliver

This is the link in the message that Trusteer has sent me today. I have updated and works fine thus far.
Thank you for contacting Trusteer Technical Support.
We are glad to inform you that a version of Rapport which supports Firefox 6 has
been released and is now available for download in the following link:
http://download.trusteer.com/NkuiAcruiKc/RapportSetup.exe
Please make sure to restart your computer after the installation process is
completed.
Please note: This version of Rapport is currently a beta version. We would
appreciate any feedback you may have regarding this version.
If Rapport states that the version of Rapport you are trying to install is older
than the version already installed, please follow these instructions:
1. Choose to uninstall Rapport
2. When prompted, select "Delete all user settings". Please be assisted by the
following image: http://consumers.trusteer.com/files/images/uninstall.jpg
3. Reinstall Rapport from the link above.

Keep getting pop up saying the Safari browser version you are currently using doesn't suppor the com. tool bar...help

Keep getting a pop up saying the Safari browser version we are currently using doesn't support the community tool bar whenever we try to get on a site supported by Safari.

safari "community toolbar" site:discussions.apple.com - Google Search

My sound buttons keep stopping working and when I click onto a video it doesn't even have the little slider that you use to turn the volume up. What is wrong with my phone?

My sound buttons on my iPhone 4S keep stopping working, even wen I use the switch to turn my phone on loud it comes up and as soon as I hit a volume button it disappears! Also when I am on a video on Facebook etc the volume slider isn't there?

You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry

The Safari browser version you are currently using does not support the community toolbar.

the Safari browser version i am currently using does not support the community toolbar. And Iam using googel chrome now but not happy about this problem .
I would like to fixe it .
Many thanks

never mind.. I got rid of it already!

Reloading the same slide that you are currently on

Similar Messages

Maybe you are looking for