REM jpg files on PC, cannot open

I know there are numerous posts on this subject, however none of them seem to help me, so I hope someone can.....
I have a BB Curve 8900 and I cut (yes, cut not copy) numerous pictures from my BB and pasted them to my laptop, then deleted them from my BB.
When I have come to view them on my laptop I have now realised that they are encrypted!! I really don't want to loose these pictures, is anyone able to offer a solution please?

Hi and Welcome to the Forums!
Only the original device than encrypted them can decrypt them...there is nothing for decryption on the PC itself. You must put them back onto your BB and decrypt them there. See these for reference:
KB22577Encrypted files on a media card are able to be copied off of the media card in a decrypted state and can be viewed
KB11454Encrypted files stored on the microSD media card appear as .rem files
KB12999How to encrypt files on an installed media card in the BlackBerry smartphone
Hopefully you will be lucky...but it is completely possible that they cannot be decrypted at all...ever.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Camera Raw won't open certain JPG files from Bridge, others open in ACR with no problem.

Edit: This was orignally posted in the Photoshop > Macintosh forum, which I failed to realize was read only. Thanks to a PM headsup, I'm reposting it here. Thanks
I've searched the internet and the Adobe forums and cannot find a direct answer to what I'm dealing with.
The issue I am having is that Bridge CS5 (current version 4.0.5.11) will open some JPG images in Raw with no problem and others nothing happens at all. All the images come from the same source (Fujifilm Frontier SP2000) so I really don't understand why Bridge ignores some of them as being openable in RAW. For example, say this roll of film has 36 images. If I "Select All", right click, and select "Open in Camera Raw", it will open whichever it deems acceptable in RAW and nothing happens at all to the others (The RAW dialog will, for instance, only open 10 images instead of all 36, and the remaining images are not altered in any way).
I've made sure that Photoshop is prefering Adobe Camera Raw with Supported Raw Files and in Camera Raw Preferences I have the box ticked to Automatically open JPGs with Settings but nothing helps.
My work around is to one file at a time in the Photoshop Open dialog, selecting an affected JPG file and have it open them as Camera Raw instead of Jpeg.
Any ideas? It's done this for quite a while and I have no idea how to fix it.
Thanks.
Cary

Cary,
It could be an insufficient memory problem. Please supply details about your machine.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Also, please note that the Camera Raw forum is here:
http://forums.adobe.com/community/cameraraw
Thanks!
Wo Tai Lao Le
我太老了

AS2 error The FILE send adapter cannot open file

I have AS2 setup under biztalk. I have receive port which listen to HTTP adapter and keep listening on web site.Then there is corresponding send port which just write that file in folder . Send port just have filter for Receive adapter name.
It works fine, but some time I get error message
The FILE send adapter cannot open file <folder name\guid.txt > for writing.
Details: The system cannot find the path specified.
I am not able to understand what is error for this? Please help me to figure-out this.

Specifying the Backup transport is not going to solve the problem. Specifying the backup transport in this case is something like addressing the symptom of the issue and not finding the solution to root cause of the issue.
As you specified, if the mentioned error only happens some time but not always. In this case, the message "The
FILE send adapter cannot open file <folder name\guid.txt > for writing." would just be a warning message. Just by setting the retry in the send port will solve the issue. i..e Since this issue occurs rarely, it may be short lived glitch.
So by setting the retry count (lets say 3 times) with retry interval (let say 5 mins), this issue can be easily mitigated. You would not lose the message. So during the glitch you would get this message as warning, send port will retry "after specified
retry interval so after 5 mins", so by that time chances of files transfer is high. So this problem can be easily handled just by having retry count and retry interval in send port.
But you need to find the actual cause for this issue or you need to find the permanent resolution for this issue.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Dynamic Send Port : The FILE send adapter cannot open file C:\Temp for writing. Details: Access is denied.

Hi All,
We have requirement of using ESB toolkit and transforming incoming xml file to edi format. So, we are using ItinerarySelectReceiveXML pipeline for receiving the input from the input location and "EDISend" pipeline for transforming it into EDI and
send it to destination.
Now, the receive pipeline is picking up the file, but it is not processed and sent to destination.
And, we are getting an Access Denied error from Dynamic send port.
Error Description :
The FILE send adapter cannot open file C:\Users\Public\Temp for writing.
Details: Access is denied.
Any Immediate solutions/suggestions are appreciated...Thanks.
Anand

The difference between dynamic and static port would be send handler. For dynamic port, default send handler will be used and for static port the one configured on the port will be used, could you validate this configuration.
Also sometimes, administrative privileges are not "real" administrative privileges and company admins will have limited permissions on C Drive folders. Try writing to some other folder to isolate the issue.
Regards, Ajeet Kumar MCTS Biztalk Server

I edited a .nef file in Camera Raw and PSE 11 saved it as a .xmp file. I cannot open it now.

I edited a .nef file in Camera Raw and PSE 11 saved it as a .xmp file. I cannot open it now.
I am not sure if this is an issue but Windows does not recognize the .xmp file and give it an icon with the photo's picture. On a related note, when I edited some .nef files and Windows saved it as .dng file, it too, like the .xmp file, Windows does not recognize the .dng file and give it an icon with the photo's picture.
Do I need to download something to create this icon?

PSE didn't save your file as an .xmp file. The .xmp file is not the image--that's still the .nef. The xmp file is what adobe calls a 'sidecar' file, just a record of the settings you used in the raw converter. As long as it's in the same place as the image, when you open the nef in ACR again, it will open where you left off, with the settings you chose.
If you want to save as, you have two choices:
1. Click the Open button in the raw converter window and save in the image format of your choice.
2. Use the Save button in the raw converter to create a separate DNG file, which still must be opened in the raw converter and converted to an image format for use in other programs.

Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

wmv is a Windows Media format. I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
You need
Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
After installation a new Flip4Mac pane will appear in System Preferences. Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
or play the files with VLC
VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
While you're at it you might install:
Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
Perian doen't do WMV but it's handy to get many things to play in Quicktime.
Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

IPhoto doesn't recognize .jpg files and can't open it. What may I do now?

iPhoto doesn't recognize .jpg files and can't open it. What may I do?

a common problem is that you don't have permission to upload those files, but it is an easy fix
1) Finder
2) Users(it should have the account name on it)
3) pictures
4) right click on iphoto library then click info
5 on the bottom of the new window there should be a sharing and permissions tab
6) make sure you have permission to read & write
The only other problem I can think is that you are having problems with hard drive space. if so you might want to clean up your hard drive to free up some space. please let me know if that worked for you.

All of a sudden I am receiving photos as winmail.dat files, that I cannot open. What is this, and why can't I open winmail.dat?

All of a sudden I am receiving photos as winmail.dat files that I cannot open. What is this and why can't I open them?

http://www.twistermc.com/583/open-winmaildat-files-mac/

PS elements saves pic as a blank file and I cannot open it

Hey guys, I'm hoping you can help me.
I am using Photoshop Elements 8 and I'm not sure what happened (or what I did), but suddenly the files I save (save-as, i rename retouched files) started saving as blank thumbnails. I cannot open them, and the properties list the type of file as "File" (although I was saving them .jpeg).
Also, the size of the blank thumbnails is about the same as the original picture (a little larger cause it's retouched; which is normal).
The file still saves as a blank if I change the name and if I try changing the format (.bmp, .jpeg., etc)
I'm using Windows Vista, if it matters.
I'm attaching a screencap of what it looks like in the folder and the file properties that come up
Let me know if I should provide any other information and I'd appreciate any and all help. This is the only PS I have access to right now and it's painful to have folders of pics and not be able to do anything with them.
Thanks in advance =)

It looks like like windows got confused because you have periods in the file names.
If you take one of your saved files and add a .jpg at the end elements should open the file.
It's probably a good idea not to use periods in file names except for the file extension.
Using an underscore instead of periods is a better way to go.
It also seems that in later versions of elements and photoshop one has to be careful about using periods in the file names or the program won't save the files right
which was not the case in old versions of elements and photoshop.
The trick to saving a remamed file with periods is to reselect jpg from the dropdown after renaming the file so the proper extension is added.
That being said i've avoided using periods in file names for many years just to avoid any possible problems.

PDF downloads show unknown file size so cannot open

This problem has just started over the past week. When I need download a pdf file (such as tickets etc) it shows as 'Unknown size' so I cannot open it. The dowload list shows only downloads done months ago - although, up to last week, I had no problem. Cory MH replied earlier this week suggesting the following but I am not sure how to access the information. This is screen shot of the advice:
Can you check the properties of your places.sqlite file, which handles your bookmarks, browsing history, and downloads? It is contained in your Firefox profile folder, which you can access by going to the about:support page or:
• Help (or > ) > Troubleshooting Information
On that page, click the "Show Folder" button and that will open your profile folder in Windows Explorer. Look for the places.sqlite file and right click it. Select Properties and under the General tab, make sure that it isn't "Read-only".
You can also install the Places Maintenance extension to run maintenance on the file to see if that can fix it if it is corrupted. Please read the following articles first as they provide helpful hints and instructions that may be relevant to you:
I really need clarification as to where to find the 'about:support page' on Help/Troubleshooting etc.
This problem is a real nuisance as I will need to dowload boarding passes later in the week.
Thanks for any help
Rosie

Hello,
You can reply to the existing thread: https://support.mozilla.org/en-US/questions/1027516
I left my response there.

Photoshop files in FCE - Cannot Open Project

I have a series of Photoshop files (RGB with about 10 layers a piece).
I am able to import a file into FCE HD and move the layers around as tracks - everything works great.
I save the file, and close. When I try to re-open the file, I get the dreaded "Cannot open project file".
I have tried this with an external drive and saving to the desktop. I have also tried importing normal pictures - no problem. It's when I import layers. I have been able to isolate the problem to layered Photoshop files.
Any ideas?
thanks.

Any PS file that has transparency that is imported
into a PAL project will corrupt the file, so
that you cannot open it again. Sorry.
See this (9th post down) which showed that any file created in Photoshop with its type as ".psd", whether with or without transparency, will give this fault. However, a file created in Photoshop with .tif will be safe even if it has transparency.
G5/2.0 GHz Mac OS X (10.3.9) 1 GB RAM, 150 GB HD, Sony DCR-HC96 mini DV, FCE HD 3.0 DVD SP 3

File corrupt-Multiband-Cannot open bin-file

This error is KILLING me...I have had to resort to an auto save file twice where alot of re-work was required...I am losing my confidence in Premiere for getting jobs done. I close file...its working fine, then I open it and I get an error that says:
Mulitband
Cannot open bin-file
then program crashes...what is going on...I cannot find any documentation on this anywhere!
Thnks

What version of Premiere Pro?Have you installed the Premiere Pro CS5 (5.0.3) update? That update fixes a lot of problems.
What operating system?
What kind of footage are you using? Is it just happening with one specific asset?
Has this always happened, or did it just start happening?

HT204382 I have a file which I cannot open onb my computer.   Would anyone know how to open a file with name ending in "flv"?

I have a few files on my computer which I cannot open.   The file name ends in "flv"   Can anyone help with this?

You could download and install the following Free Player:
      http://download.cnet.com/Elmedia-Player/3000-13632_4-86189.html

I have Elements 8. I have bought A Nikon D750 and take Raw files. I have downloaded Raw 8.8 file converter, but cannot open Raw files

I have Elements 8. Raw converter for my previous Nikon D300s worked ok. Now I have D750 cannot open Raw files. I have downloaded lastest Raw converter from Adobe 8.8
Still cannot open Raw file. Get message "cannot open as it is wrong type of file" How do I get the latest Raw converter to work with Elements 8? Any info gratefully received.

Are you saying you converted from NEF to DNG? If so, after you convert your raw files to the Adobe universal Raw format, the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.8
Mac download (.dmg file) click here DNG Converter 8.8
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

In 2007, I stored some information on a disk, as it was too sensitive to remain on my computer. Now the disk shows it was a .cwk file and I cannot open it. I've tried several things, but I've gotten messages that it isn't a pages, numbers or presentation

In 2007, I stored some sensitive information on a disk rather than leave it on my computer. Now, in the latest version of Pages, I cannot read the disk, although accessing the information could save me days of work duplicating it. Is there a way of reading/converting the disk?

By 'cannot read the disk' I assume you mean that you can access the file but cannot open it (if you couldn't read the disk you wouldn't be able to see the file in the first place).
As you have found, the latest Pages does not open Appleworks documents. If you had the earlier version of Pages and upgraded, the older version is still in the iwork '09 folder in your Applications folder and that version pf Pages will open AW Word Processing documents (which presumably that is).
Failing that, Panergy Software's docXConverter v3.2 ($19.95) can convert Appleworks 5 and 6 Word Processing documents to RTF (though it has been reported that it can only handle documents which contain only text, not those which include images or frames). The latest version of the free LibreOffice can open AppleWorks 6 Word Processing documents and an ability to open ClarisWorks documents has been reported: it does appear to be able to handle at least some embedded images.

REM jpg files on PC, cannot open

Similar Messages

Maybe you are looking for