Rem order plan value exist for difference between PO & GR value

Dear Experts ,
In PS report S_ALR_87013558 it is found that the difference between Service PO & GR value is reflecting in Rem. Order plan.
against the WBS.
According to my understanding the difference between Material PO value & GR value reflects as outstanding commitment. Hence I assume that the same should happen in case of Service procurement also.
Kindly let me know whether the reporting is correct or not.
If the reporting is incorrect, then what could be the reason for the same and how this problem can be tackled.
Regards,
Vishal

Hi
Check if you have ticked remaining order plan value updation under costing in customization (both check boxes). If those are checked your plan value becomes assigned values always and if there is any residue it will be there under plan value.
Also note that for service PO, once all entry sheets are posted, for final entry sheet user should click FINAL ENTRY in SES. It will remove any residual commitment.

Similar Messages

SSRS expression for difference between two currency values

Hi All;
I need to get the difference between two currency values
Below is my report
I need to get differene between Actual Income and Profile Income and this value should be in "£" In this example it should be £0.00
Any help much appreciated
Thanks
Pradnya07

=sum(Fields!ProfileIncome.Value - Fields!ActualIncome.Value)
This could have either field first, but depends on which field is expected to be larger. You would then format the textbox to show in pounds.
HTH

ORA-35563: Multiple values exist for an attribute of this dimension member

After following the tutorial Building OLAP Cubes I was trying to make a cube with aggregation down to the day instead of down to the month.
I created a times table pretty similar to the one used in the tutorial:
CREATE TABLE EVENT_TIMES (
        HOUR_KEY        DATE NOT NULL,
        DAY_ID          VARCHAR2(10),
        DAY_NAME        VARCHAR2(10),
        DAY_END_DATE    DATE,
        DAY_TIME_SPAN   NUMBER,
        MONTH_ID        VARCHAR2(30) NOT NULL,
        MONTH_NAME      VARCHAR2(40),
        MONTH_END_DATE DATE,
        MONTH_TIME_SPAN NUMBER,
        YEAR_ID         VARCHAR2(30) NOT NULL,
        YEAR_NAME       VARCHAR2(40),
        YEAR_END_DATE   DATE,
        YEAR_TIME_SPAN NUMBER
As you can see, instead of a DAY_KEY like in the tutorial, I now use an HOUR_KEY.
This is a sample of the data I inserted in this table:
select to_char(hour_key,'YYYYMMDDHH24MISS'),DAY_ID,DAY_NAME,DAY_END_DATE,DAY_TIME_SPAN,MONTH_ID,MONTH_NAME,MONTH_END_DATE,MONTH_TIME_SPAN,YEAR_ID,YEAR_NAME,YEAR_END_DATE,YEAR_TIME_SPAN from event_times;
TO_CHAR(HOUR_KEY,'YYYYMMDDHH24MISS') DAY_ID     DAY_NAME   DAY_END_DATE DAY_TIME_SPAN MONTH_ID                       MONTH_NAME                               MONTH_END_DATE MONTH_TIME_SPAN YEAR_ID                        YEAR_NAME                                YEAR_END_DATE YEAR_TIME_SPAN
20140104050000                       Y2014M1D4 Y2014M1D4 04-JAN-14                1 Y2014M1                        Y2014M1                                  31-JAN-14                   31 Y2014                          Y2014                                    31-DEC-14                365
20140104060000                       Y2014M1D4 Y2014M1D4 04-JAN-14                1 Y2014M1                        Y2014M1                                  31-JAN-14                   31 Y2014                          Y2014                                    31-DEC-14                365
I then created my TIME dimension with DAY as the lowest level.
When I try the maintain cube option it fails at the 'LOAD NO SYNCH' step with the rejected records having an error message that says:
ORA-35563: (XSRWLD17) Multiple values exist for an attribute of this dimension member.
To me, this is a very cryptic message and the only explanation I find online is:
Cause
Multiple source table rows containing different values for a dimension attribute were found. Only the first of the multiple rows has been loaded.
Action
Fix the mapping or remove the rows with conflicting attribute values..
This confuses me. In the tutorial the lowest level was day and the TIMES table contained 1 record for each day.
In my example, the lowest level is hour and the TIMES table contains 1 record for each hour.
Which attribute has multiple values? And which values?
The rejected records (101) are not very clear:
ALIAS_1 = 'MONTH_Y2014M1' AND ALIAS_3 = to_date('31JAN14') AND ALIAS_4 = 31 AND ALIAS_5 = 'Y2014M1' AND ALIAS_6 = 'Y2014M1' AND ALIAS_7 = 'YEAR_Y2014'
If anyone can help point me in the right direction, it would be greatly appreciated.

I have seen this recently. The issue is with the dimension load itself. You have a hour level record table but the rules relating to hierarchy/attribute values etc are checked/reinforced during the load and this error comes up sometimes.
I would guess that the issue seems to be with your month level information present in the higher level month columns. There are many records corresponding to a single month in ur case, month of Y2014M1. Information relating to Month level member Jan 2014 or member MONTH_Y2014M1 is present in these records: 31 (days) *24 (hours) = 744 records. The data in these 744 records for columns - MONTH_ID, MONTH_NAME, MONTH_END_DATE, MONTH_TIME_SPAN need to be exactly the same in order for the single member MONTH_Y2014M1 to have month attributes loaded with valid values.
For e.g: if records #1 to #743 contain month_timespan=31 but for some unknown reason record #744 contains month_timespan=30 then this error will come up. OLAP does not know which value to load (31 or 30), and only 1 value can be loaded onto the month level member corresponding to month Y2014M1.
A quick check of the data should give you the answer. Typically there may be some mistake/invalid assumptions made with the boundary records (in your case, check for values for records corresponding to hour=0 or hour=23/24) which is causing the issue.
HTH
Shankar

What is the meaning of Rem.Order Plan in the PS cost report S_ALR_87013558

Hi,
Does anyone know the meaning of "Rem. Order Plan" column in the PS Budget-related cost report-- S_ALR_87013558 Budget\actual\Commitment\Rem.Plan\Assigned? I understand all the other columns like budget, actuals, commitment and assigned, but I have no idea what the "Rem order plan' means?
Thanks,

In this report it is "Planned Cost - (Actual + Commitment)"
Venkat
Edited by: VenkatSrinvas Konda on Oct 16, 2008 8:09 AM

How to know if implementation with a filter value exist for a BAdI in code?

Hi all,
Scenario:
I created a BAdI. There will be a button on the UI to call its implementation(s); while if there is no implementation with specified filter value, this button needs to be hidden. Thus I need to know if the implementation exist before calling it.
Question:
In the ABAP code, how to get whether implementation with specified filter value exists for a BAdI?
If it's possible, please help provide code.
Thanks and regards,
Said

Problem solved:
data: r_badi type ref to YOUR_BADI,
          badi_impl_num type i.
get badi r_badi
    filters
      flt_name = fit_val.
badi_impl_num = cl_badi_query=>number_of_implementations( badi = r_badi ).
if badi_impl_num > 0.
    "there are badi implementation(s)
endif.

Excel sheet for difference between EP 6.0 and EP 7.0

Hi All,
Wish all of you a very very Happy New Year 2008.
Can some body send the excel sheet for difference between EP 6.0 and EP 7.0 to [email protected] asap.
Thanks in advance
Jyoti

Aaaaggghhhh.
Please could someone either get it uploaded as an article... or even easier, add it to the Portal Wiki. It has an attachments tab!
Then we won't have huge threads with e-mail addresses on (which bots will then pick up and send lots of spam to).
Many Thanks
Paul

Difference between binding and value

Hi
I am new to JSF
Can you tell me what is the difference between binding and value attribute of a
JSF component ?
Many thanks.

Hi,
the binding is the component association to a managed bean (or backing bean). This allows you to manipulate the component in Java code stored in a managed bean.
The value is what the actual component value is.
Frank

[svn] 4112: Further work for FXG to SWF transcoding - checking in some work resulting from collaborating with Kaushal to correct FXG transforms and gradient transforms as well as cater for differences between Java AffineTransform and the SWF Matrix type .

Revision: 4112
Author: [email protected]
Date: 2008-11-14 10:05:42 -0800 (Fri, 14 Nov 2008)
Log Message:
Further work for FXG to SWF transcoding - checking in some work resulting from collaborating with Kaushal to correct FXG transforms and gradient transforms as well as cater for differences between Java AffineTransform and the SWF Matrix type.
QE: Not yet.
Doc: No
Checkintests: Pass
Reviewer: Kaushal
Modified Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/GraphicContentNode.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/fills/LinearGradientFillNode.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/fills/RadialGradientFillNode.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/strokes/LinearGradientStrokeNode.j ava
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/strokes/RadialGradientStrokeNode.j ava
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/swf/AbstractFXGGraphics.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/swf/TypeHelper.java
Added Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/ScalableGradientNode.java

Assets: provision for differences between APC and Market Value

Hi,
my current client needs to make a provision with the difference between the APC and Market Value in some assets (buildings...).
Our idea is to use Valuation Area 02 in order to reflect those "Market Values" and create another Valuation Area = 02 - 01. With this area we will have the amount the we need to make the provision in GL.
I just wanted to know if FI-AA has anything that could make those provisions automatically. I have looked into help.sap.com, customizing etc... and I could not find anything.
Does anybody knows if there is a standard "provision function" for assets?
I think that we will need to develop an ABAP program for this requirement...
Cheers

not solved but need to close it...

Get Date Difference between 2 date values as days

Hi,
How to get the difference between 2 dates in number of days format. Say if i need the difference between 2012-08-23 and 2012-08-20 as 3
Please help..

Hi,
You can do it in XSLT since the dates are in ISO 8601 format...
http://www.w3.org/TR/NOTE-datetime
Here is a sample XSLT...
<xsl:stylesheet version="2.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:fn="http://www.w3.org/2005/xpath-functions">
<xsl:template match="/">
<xsl:variable name="date1" select="xs:dateTime(/root/date1)"/>
<xsl:variable name="date2" select="xs:dateTime(/root/date2)"/>
<xsl:value-of select="fn:days-from-duration($date2 - $date1)"/>
</xsl:template>
</xsl:stylesheet>The above XSLT will result *4* for the following input...
<root>
<date1>2012-01-11T00:00:00.000-05:00</date1>
<date2>2012-01-15T00:00:00.000-05:00</date2>
</root>You can test this example here...
http://xslttest.appspot.com/
Hope this helps...
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Difference between Multiple single values and Selection option variables

Hi !
Can any one tell me the difference between variable types:
Multiple single values and Selection option?
I used each one of them for selecting values for a characteristic but could not notice a difference in choosing values.
Is there some difference in functionality or can they be used interchageably?
Regards,
Sri Harsha

Harsha,
When you go for slection option, in the variable input screen you will be having a button in the last where you can give your slections. There you can maintain either multiple single values and Multiple intervals or else not equal to also..
Just check out there... you will be having tabs for each..
Assign Points if it helps
Gattu

Searching for differences between oracle 8i and 9i

hello
can somebody help me please. i am searching for the difference between oracle 8i and 9i, and specially the differences in the DDL between 8i and 9i. may someone can help me!
thanks
Message was edited by:
Da Rookee

i need some expamples to show the difference....for
example how it is written in 8i without joins and inNow you are talking about DML not DDL
For some examples showing the differences between the "traditional" Oracle join syntax and the ANSI join syntax see this article on oracle-base
http://www.oracle-base.com/articles/9i/ANSIISOSQLSupport.php

How to find the difference between 2 time values in Java

hi all,
i have 2 time values
String time1="6:20";
String time2="21:30"
How to find the difference between 2 times in Java?
pls help
thanx in advance....

Calculating Java dates: Take the time to learn how to create and use dates
Working in Java time: Learn the basics of calculating elapsed time in Java
Formatting a Date Using a Custom Format
Parsing a Date Using a Custom Format

Difference Between Maps and Value Objects

Hi Guys
Can you please help me differentiate between HashMap and Value Object Design patterns. The trade offs of each and how to choose between the two patterns.

It really depends upon what you really want to do:
- If you want to transfer simple objects using their inherent structure, use your DomainObject itself or if you really need to, use a ValueObject
- If you want to transfer a lot of similar or even different objects with unique keys, use some Map.
Using a HashMap, you might need to consider:
- The hashing can significantly increase your CPU load, if you are doing too much. For example you can define your hashValue() to return just the PrimaryKey, or it's hashValue() if it's an Object. And equals() needs only to compare the PrimaryKey as well. This semantic results in two objects being equal, if they have the same PrimaryKey. You may define an additional deepEquals() method, to see if an updated version contains changes to the stored version, if this is needed.
- If you keep around references in a Map without clearing them, when you don't need them any more, the Map will increase in size. If you want to keep them, but only as memory alows, you might even consider using WeakReference<T>.
Together with the rules provided by krunals, I hope this helped a bit...

Document for difference between java and c++ ?

I want to know if there is a document that lists the difference between the features and syntax of java and c++ online. If somebody knows, please let me know.

I want to know if there is a document that lists the
difference between the features and syntax of java and
c++ online. If somebody knows, please let me know.The difference is, there is no similarity. Don't even try to think of Java in relation to c++, you'll only end up confusing yourself.
It's like trying to compare Windows and Linux, sure they do the same sort of thing, and some of the commands appear the same, but they really are completely different things.

Rem order plan value exist for difference between PO & GR value

Similar Messages

Maybe you are looking for