REM profile

Hi,
In Repetitve Manufacturing , i was doing Assembly backflush.
If i want to do Activity backflush with reporting point, ( I have maintained Milestone control key also in Routing) whether i have to change my REM profile in Material master.?
If i am changing , system shows the error related to costing.
Help me out of this. I would like to understand this process clearly.
Santhosh.

Dear Santhosh,
Assuming you have made the configuration changes to the existing REM profile in T.Code OSP2,now modify your routing/rate
routing with operations containing milestone confirmation set control key.
If my understanding is correct then I dont think a new PCC is required for the same material.Instead in KKF6N--->enter the
material,plant,select the production version,now click on change mode--->Shift+F6 and then click on cost calculator for pre.cost
estimate for the product cost collector(Shift+F1) and then save the data,now check in MFBF as I have explained in my earlier
thread.
check and revert back,
Regards
Mangalraj.S

Similar Messages

Kanban : Changed REM profile regarding generation of postprocessing records

Dear Gurus,
I am trying make a kanban container from empty to full and i am getting the below error message.
Changed REM profile regarding generation of postprocessing records - RM887
I have not change the production version or rem profile. This error is when i scan them to FULL so I have not used "Execute correction in dialog box mode" option in OSP2. NO COGI errors...
Any advice is highly appreciated.
Regards,
Senthil
Edited by: Senthilkumaran Virudhanayagam on Feb 24, 2010 3:54 AM
Edited by: Senthilkumaran Virudhanayagam on Feb 24, 2010 3:55 AM

Dear Senthilkumaran,
Was there any changes made in the REM profile in OSP2 related to creating individual post processing records or cumulated,if not
was the REM profile changed in the material master?
Can you please check this and reply?
Regards
Mangalraj.S

RM887- change rem profile regarding generation of postprocessing records.

Hi,
While doing MFBF (GR GI) I am getting error "change rem profile regarding generation of postprocessing records" Message No RM887. I am using same REM profile for many other materials for which MFBF is working fine. There are no COGI errors pendings for the materials for which I am gettinh error. But in MF47 there are some pending records which I neither can change nor delete, I am geting same message as in MFBF in MF47. So I have two issues here 1) How to adress error in MFBF. 2) Why records are seen in MF47 and not in COGI?
Thanks
Suresh.

Dear,
Please refer the OSS notes 383141,202654, 885798.
In OSP2 Transaction, check whether the REM Profile having the Tick for "Create Cumulated post processing records".
If this is not there, and allowing the entries to go to COGI with Execute Correction in dialogue mode "Optional" will be a problem
Please try and come back.
Regards,
R.Brahmankar

Changed REM Profile regarding generation of postprocessing records

Hello Team,
I have tried to backflush a part number. I get this error:
Changed REM Profile regarding generation of postprocessing records
The intrigue here is that this same part number was backflushed last week without error.
I will appreciate your inputs.
Thank you in advance.

Joel,
Check the material master for changes in REM Profile assignment, looks like the REM profile assigned to the material does not allow Post Processing records, so if there are errors during backflush like less stock, no storage location, batch not assigned, system would give error and it would not allow you to post the backflush.
If there are no changes in the material master for REM profile assignment then the assigned REM profile itself must have been changed in configuration in the path mentioned by fellow forum member. Please check and for "Error correction for backflushing" section definations.
Regards,
Prasobh

REM profile Product Type - Cost Collector Order Type

Hi all,
I am trying to create a Repetitive Manufacturing Profile, at that time standard Production Type PKMN is automatically arriving from table V_T437S_GES.
and I would like to assign the cost collector order type (self defined) to the REM profile which I am going to create.
where I need to assign the cost collector order type for production type "PKMN" while creating REM profile.
If I copy the exisiting REM profile and I am able to get the cost collector order type that I am able to see in TABLE : T437S (Repetitive Manufacturing Profile Table). If I create the REM profile newly, I am unable to get the cost collector order type in the table T437S.
So please guide to the self defined cost collector order type for newly creating REM profile.
Thanks in Advance

Madhan,
Order type "PKMN", is internally defined by SAP. Forr all cost accounting purpose, we would be using standard order type "RM01" when creating a new product cost collector for material. If required you can create your own order type say "ZM02" using transaction KOT2, please remmember you need to create with order category "05"- Product Cost Collectors.
This new Order type can be used when we are creating product cost collectors for a material.
I really dont find a reason why a new Order type is required to be created. Can you explain why?
Regards,
Prasobh

Backflush and REM profile and control key ...

Hi all,
in REM manufacturing, the backflush is control by routing control key or REM profile settign in configuration ?

HI..
In REM scenario the backflush is controlled only by REM Profile.u can configure it in SPRO.
path is ..production> Repetitive manfacturing> control data> rem profle
u can create with the help of assistant given in SPRO
plz revert me if it works for u
Regards
Anupam Sharma

Bacgflush error: Change REM profile

Hi Gurus,
I have tried to backflush a part number. I get this error:
'Changed REM Profile regarding generation of postprocessing records'.
From my knowledge we didn't chnge the REM profile and product cost collecter is also avilable.
Please help to resolve the error.
Thank you.
Naveen

Dear Naveen,
Check whether did you make any config changes in the REM profile in OSP2 or else assigned some other REM profile which
allows reprocessing.
In my understanding if already some reprocessing exists for that material in MF47,and if you try to change the REM profile and
try to backflush,this will give this error.
Check and correct me if i 'm wrong.
Regards
Mangalraj.S

REM profile for finished material and its raw material

Dear Experts
My question is ,for a repetitive manufacturing scenario
1) We are maintaining REM profile finished material . Is it necessary to maintain REM profile for its raw materials ?
2)For raw materials do we need to create the seperate REM profile which is having seperate stock determination rule ?
Regards ,
Vishwas.K

Dear Vishwas,
1.REM profile assignment is required only for the materials for which production confirmation will be made through T code MFBF or
MF42N.
2.For stock determination rule check in control data 2 in the REM profile itself. This setting is linked to the REM profile and further to
the goods movements posting for the raw materials.(check this setting in T code OSP2).
Regards
Mangalraj.S

Issues in REM Profile(AGI)

Hi Gurus
We are working of REM , we are using AGI Profile for Goods issue, from last 3 or 4 days we have started facing problem in that
when we are running AGI , it is giving message (Changed REM profile regarding generation of postprocessing records & Collective mess. for mat. XXXXin plant XXX with version 0001 not executed on 20100319* )* in this it is showing for one or 2 material whereas it is runnning fine for other materails
It is also running fine for other 2 plants
Please help me

Hi,
1. Did u change the Rem Profile any time recently ?
Reg
Dsk

Bloqued Stock Default into REM Profile

Hi everyone:
I need to know how can i be able to set the Stock Type to REM Profile, 'cause I need that the result of the Posting into MFBF T.code be Blocked Stock, instead of, Unrestr. Stock.
I was trying by the REM Profile into: IMG guide: Production> REM > Control > Profile... but... I don't get to find out the check or the configuration parameter to set this stock type. I know that into the MFBF there is a function with F5 to Change Detailed Setting but, I need this parameter pre set for all access into that screen and don't is changing it each time i go to this T code.
Please & Thanks in advance for your help.
Regards
Omar Perea

Hi OMAR ,
Could you pleasse breif How you did the setting, even i require GR atomatic By MFBF, I tried with 103 it is giving Below error ,
Update control of movement type is incorrect (entry 103 X X _ F)
Message no. M7226
Diagnosis
The system could not find entry 103 X X _ F in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
so could u explain me the process how u did ,
Thanks in advance.
Madhu

REM profile and reduction period

Dear SAP consultant,
In REM profile setting, what the meaning of Reduction period (days) ? If i set to 30 days, can i backflush plan order earlier than 30 days ahead ?
Rejoice

Dear,
Reduction period at OSP2 we define time for planned orders to be reduced.
If you enter the number of daysas 30 then system is to take into account when reducing the production quantities after 30 days. The period of reduction is calculated by adding the number of days you enter here to the backflush date.
The 30 days will be taken as working days from the factory calendar and these days will be added to the backflushing date (means 30 working days in future).
Hope clear to you.
Regards,
R.Brahmankar

REM profile and backposting

Hi,
We are using REM profile as GR and GI seperated.
We did GR on 21.11.2007
We did GI (MF70 in background) on 23.11.2007 but the posting date is 21.11.2007.
We want the posting date to be 23.11.2007 rather 21.11.2007.
Please give your suggestions.
Thanks,
Kumar

Hi Reddy,
MF70 is scheduled background and moreover the Posting date field in the variant is empty, so it normally takes GR posting in to account.
But our client requires that GI posting date should be the entry date (i.e 23.11.2007) though it is run in background.
The present scenario if you look at the material document
Document date 21.11.2007
posting date      21.11.2007
Entry date        23.11.2007
Can it be possible with any function module that the Document date, Posting date, Entry date are same (i.e 23.11.2007).
We want as fallows (without putting posting date field in MF70)
Document date 23.11.2007
posting date      23.11.2007
Entry date        23.11.2007
Thanks,
Kumar

Diff bet REM profile

Hi,
What is the diff between REM profile 0001- W/o activity backflush & 0002 - with activity backflush. Is it activity backflush is necessary?
Regards,
Dharma

hi Dharma,
the only difference between the
>Final backflsh w/o activities profile 0001 &
>Final backflsh w activities profile 0002
is that in profile 0001 u cannot post the activities to the product cost collector while in profile 0002 u can when u backflush.
the activities which are posted in the to the collector can be done based on
>standard cost estimate
>preliminary cost estimate
standard costing is done usually at the start of the year and is not changed while preliminary costing calculates the costs for the production process which can be for a particular production version or for a combination of BOM or Routing.
so choosing between these two profiles depends on how u want the capture the cost while backflushing.
hope this gives the required info
regards,

Planned Order Profile for REM

Hi,
Is Planned order profile for REM needs to configured for Planned Order type PE in IMG(T Code OMDD).
Thanks in Advance.
Regards,
PPcon

Dear,
SPRO>Production>MRP> proc.proposals>planned orders-->Define order profiles
Ypu have set the rep mfg indiactor & suitable rem profile in MRP 4 view of material
BOM Explosion Tab
Selection method : 2 -By production version (prior to this , a Prod version shd be created)
Please try and come back.
Regards,
R.Brahmankar

Background Job in COGI(REM Backflush error handling)

Hi Everyone.
I have one question.
Our company use REM Backflush .
And Our REM profile setting is next.
- Use GI Backflush at GR posting
- Don't use report point backflush
- Create cumulated and individual postprocessing record
In this circumstance, we use T-code COGI to process backflush error.
When I execute the COGI in online, There is no problem
<b>But, After I make a job for background in sm37, When I execute background gob for COGI, There is a problem. In real, Background gob is will executed. But COGI errors remain as before.</b>

Hi,
Actually you should use
Transaction MF47
Program RMSERI11, for post process record.
For post processing , manually entry like storage location and Batch number(if batch management is enabled) is required , if the post process record is created according to this error.
And hence it is not possible to correct all the records by background job.
Thanks
Thamizh

REM profile

Similar Messages

Maybe you are looking for