Remedial Measures to end recurring difficulty in ejectind CD
I have a slot loadind iMac ablout 5+ years old. Honestly it does provide good service. One small problem- quite often a CD in the slot would not eject on normal commands. I have to use a pin in the manual ejection slot. I notice lots of iMac users have similar problem. Does anyone know of a maintenance procedure that would do away with time consuming and frustating problem?
I will be grateful for any help
rsb1929
iMac Mac OS X (10.3.9)
All I have is apple doc.#61347 an #106752.
Have you tried using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes repair thread?
Doing the things in his link is a good start for a monthly maintenance program.
Cheers!
DALE
Similar Messages
-
Inconsistent data when exporting measurement markup to Excel?
I use Adobe Acrobat XI Pro on a Windows 7 Dell PC to create Commercial Landscape takeoff's from architectural drawings. After setting the appropriate scale under 'Change Scale Ratio' and then using the measurement tools to outline, color code, and label different areas, I right click the document and choose 'Export Measurement Markup to Excel...'. My problem is 80% of the time the measurements that end up listed in the exported Excel document are not consistent with measurements of the specific areas I've done my takeoff on. For instance, a planting bed area that I've outlined with the area tool which may be 457.53 square feet is listed in the export excel document as 2.3 square feet. I've tried checking and unchecking the 'Use Scale and Units from Document (when present)' option under the Preferences>Commenting menu, to no avail. Most of the time there is no embedded scale in the drawings we're working with. We've used various versions of Acrobat Pro for over 5 years performing hundreds of landscape takeoff's, trying to select and deselect just about every menu option under the 'Preferences' tab that has to do with measurement and commenting, but still have not found what causes this inconsistent exporting of measurement data across all versions. Our workaround is to just click on every little area we've measured out and manual transfer that to the spreadsheet.
Here is a dropbox to a PDF example and the exported excel csv file > Dropbox - Adobe TroubleshootingHi,
Thanks for the reply. I just checked and both settings are the same:
decimal separator is a . in the server's regional settings and user preferences.
I have tried changing the regional settings to no avail.
The strange thing is that if I connect from my laptop to another 9.3.1 environment then I can export to excel with the correct decimal places.
I'd say this is definitely an environment issue.
Thanks again for your help.
Seb -
Editing multiple ending symbols in score editor...what the heck?!?!?
I must be dense or something - in ver. 7 lengthening the end bracket on repeated ending symbols was as easy and click-dragging the end to the desired measure. In ver. 8 it appears that there is no editing possible - you're stuck with the default one measure 1st ending!
Please tell me I'm doing something wrong - it's driving me crazy.
Message was edited by: PhattlippzThe usual way is to delete the old font & restore it from a backup copy.
First you have to identify the corrupted font! -
Time Calculation Shell dimension is slow compared to hardcoded measure?
Hi,
I have a measuregroup with 200m+ rows with about 20 measures (sums). I've created a shell dimension to hold my time calculation members such as mtd, qtd, ytd, etc. My problem is that it performs REALLY poorly when using the time calculation dimension.
My script looks like this:
SCOPE
Measuregroupmeasures("MyMeasureGroup");
SCOPE
[Time Calculation].[Calculation].&[None];
THIS =
[Measures].CurrentMember;
END SCOPE;
SCOPE
[Time Calculation].[Calculation].&[MTD];
THIS =
Aggregate
[Time Calculation].[Calculation].&[None]
MTD([Date].[Calendar (YQMD)].CurrentMember)
END SCOPE;
SCOPE
[Time Calculation].[Calculation].&[QTD];
THIS =
Aggregate
[Time Calculation].[Calculation].&[None]
QTD([Date].[Calendar (YQMD)].CurrentMember)
END SCOPE;
SCOPE
[Time Calculation].[Calculation].&[YTD];
THIS =
Aggregate
[Time Calculation].[Calculation].&[None]
YTD([Date].[Calendar (YQMD)].CurrentMember)
END SCOPE;
END SCOPE;
When I use my Calendar hierarchy and time calculation dimension as a background selection it takes forever. It never returns anything. A profiler trace shows that it's just pushing 1 and 21 events (cache data).
If I create the following measure:
CREATE
MEMBER CURRENTCUBE.[Measures].[TestMTD] AS
SUM(MTD([Date].[Calendar (YQMD)].CurrentMember), [Measures].[MyMeasure]),
VISIBLE = 1 ;
it works just fine but the whole point here is I want to avoid creating new measure for every time calculation.
The measuregroup has been partitioned by month and I've set each partition slice to the corresponding month in the calendar hierarchy.
Why doesn't my script perform - please advice :)
Thanks.Hi Mortenbpost,
According to your description, the issue was solved by change Aggregate() function to Sum() function, now you want to know why it behaves like that, right?
In Aggregate function, if a numeric expression is not provided, this function aggregates each measure within the current query context by using the default aggregation operator that is specified for each measure. Here is a thread which discuss difference
between AGGREGATE() and SUM()https://social.msdn.microsoft.com/Forums/sqlserver/en-US/ef4b2555-45f2-4871-9137-a12a637ce2f5/whats-the-difference-between-aggregate-and-sum?forum=sqlanalysisservices
Besides, you can use SQL profiler to monitor what's the difference between using AGGREGATE() and using SUM().
Regards,
Charlie Liao
TechNet Community Support -
Problem converting a (working) Java program into an applet
When I'm trying to access an Image through a call to :
mediaTracker = new MediaTracker(this);
backGroundImage = getImage(getDocumentBase(), "background.gif");
mediaTracker.addImage(backGroundImage, 0);
I'm getting a nullPointerException as a result of the call to getDocumentBase() :
C:\Chantier\Java\BallsApplet
AppletViewer testBallsApplet.htmljava.lang.NullPointerException
at java.applet.Applet.getDocumentBase(Applet.java:125)
at Balls.<init>(Balls.java:84)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:296)
at java.lang.Class.newInstance(Class.java:249)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:548)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:477)
at sun.applet.AppletPanel.run(AppletPanel.java:290)
at java.lang.Thread.run(Thread.java:536)
It seems very weird to me... :-/
(all the .gif files are in the same directory than the .class files)
The problem appears with AppletViewer trying to open an HTML file
containing :
<HTML>
<APPLET CODE="Balls.class" WIDTH=300 HEIGHT=211>
</APPLET>
</HTML>
(I tried unsuccessfully the CODEBASE and ARCHIVE attributes, with and without putting the .gif and .class into a .jar file)
I can't find the solution by myself, so, I'd be very glad if someone could help
me with this... Thank you very much in advance ! :-)
You'll find below the source of a small game that I wrote and debugged (without
problem) and that I'm now (unsuccessfully) trying to convert into an Applet :
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.net.URL;
public class Balls extends java.applet.Applet implements Runnable, KeyListener
private Image offScreenImage;
private Image backGroundImage;
private Image[] gifImages = new Image[6];
private Image PressStart ;
private Sprite pressStartSprite = null ;
private Image YouLose ;
private Sprite YouLoseSprite = null ;
private Image NextStage ;
private Sprite NextStageSprite = null ;
private Image GamePaused ;
private Sprite GamePausedSprite = null ;
//offscreen graphics context
private Graphics offScreenGraphicsCtx;
private Thread animationThread;
private MediaTracker mediaTracker;
private SpriteManager spriteManager;
//Animation display rate, 12fps
private int animationDelay = 83;
private Random rand = new Random(System.currentTimeMillis());
private int message = 0 ; // 0 = no message (normal playing phase)
// 1 = press space to start
// 2 = press space for next level
// 3 = game PAUSED, press space to unpause
// 4 = You LOSE
public static void main(String[] args)
try
new Balls() ;
catch (java.net.MalformedURLException e)
System.out.println(e);
}//end main
public void start()
//Create and start animation thread
animationThread = new Thread(this);
animationThread.start();
public void init()
try
new Balls() ;
catch (java.net.MalformedURLException e)
System.out.println(e);
public Balls() throws java.net.MalformedURLException
{//constructor
// Load and track the images
mediaTracker = new MediaTracker(this);
backGroundImage = getImage(getDocumentBase(), "background.gif");
mediaTracker.addImage(backGroundImage, 0);
PressStart = getImage(getDocumentBase(), "press_start.gif");
mediaTracker.addImage(PressStart, 0);
NextStage = getImage(getDocumentBase(), "stage_complete.gif");
mediaTracker.addImage(NextStage, 0);
GamePaused = getImage(getDocumentBase(), "game_paused.gif");
mediaTracker.addImage(GamePaused, 0);
YouLose = getImage(getDocumentBase(), "you_lose.gif");
mediaTracker.addImage(YouLose, 0);
//Get and track 6 images to use
// for sprites
gifImages[0] = getImage(getDocumentBase(), "blueball.gif");
mediaTracker.addImage(gifImages[0], 0);
gifImages[1] = getImage(getDocumentBase(), "redball.gif");
mediaTracker.addImage(gifImages[1], 0);
gifImages[2] = getImage(getDocumentBase(), "greenball.gif");
mediaTracker.addImage(gifImages[2], 0);
gifImages[3] = getImage(getDocumentBase(), "yellowball.gif");
mediaTracker.addImage(gifImages[3], 0);
gifImages[4] = getImage(getDocumentBase(), "purpleball.gif");
mediaTracker.addImage(gifImages[4], 0);
gifImages[5] = getImage(getDocumentBase(), "orangeball.gif");
mediaTracker.addImage(gifImages[5], 0);
//Block and wait for all images to
// be loaded
try {
mediaTracker.waitForID(0);
}catch (InterruptedException e) {
System.out.println(e);
}//end catch
//Base the Frame size on the size
// of the background image.
//These getter methods return -1 if
// the size is not yet known.
//Insets will be used later to
// limit the graphics area to the
// client area of the Frame.
int width = backGroundImage.getWidth(this);
int height = backGroundImage.getHeight(this);
//While not likely, it may be
// possible that the size isn't
// known yet. Do the following
// just in case.
//Wait until size is known
while(width == -1 || height == -1)
System.out.println("Waiting for image");
width = backGroundImage.getWidth(this);
height = backGroundImage.getHeight(this);
}//end while loop
//Display the frame
setSize(width,height);
setVisible(true);
//setTitle("Balls");
//Anonymous inner class window
// listener to terminate the
// program.
this.addWindowListener
(new WindowAdapter()
{public void windowClosing(WindowEvent e){System.exit(0);}});
// Add a key listener for keyboard management
this.addKeyListener(this);
}//end constructor
public void run()
Point center_place = new Point(
backGroundImage.getWidth(this)/2-PressStart.getWidth(this)/2,
backGroundImage.getHeight(this)/2-PressStart.getHeight(this)/2) ;
pressStartSprite = new Sprite(this, PressStart, center_place, new Point(0, 0),true);
center_place = new Point(
backGroundImage.getWidth(this)/2-NextStage.getWidth(this)/2,
backGroundImage.getHeight(this)/2-NextStage.getHeight(this)/2) ;
NextStageSprite = new Sprite(this, NextStage, center_place, new Point(0, 0),true);
center_place = new Point(
backGroundImage.getWidth(this)/2-GamePaused.getWidth(this)/2,
backGroundImage.getHeight(this)/2-GamePaused.getHeight(this)/2) ;
GamePausedSprite = new Sprite(this, GamePaused, center_place, new Point(0, 0),true);
center_place = new Point(
backGroundImage.getWidth(this)/2-YouLose.getWidth(this)/2,
backGroundImage.getHeight(this)/2-YouLose.getHeight(this)/2) ;
YouLoseSprite = new Sprite(this, YouLose, center_place, new Point(0, 0),true);
BackgroundImage bgimage = new BackgroundImage(this, backGroundImage) ;
for (;;) // infinite loop
long time = System.currentTimeMillis();
message = 1 ; // "press start to begin"
while (message != 0)
repaint() ;
try
time += animationDelay;
Thread.sleep(Math.max(0,time - System.currentTimeMillis()));
catch (InterruptedException e)
System.out.println(e);
}//end catch
boolean you_lose = false ;
for (int max_speed = 7 ; !you_lose && max_speed < 15 ; max_speed++)
for (int difficulty = 2 ; !you_lose && difficulty < 14 ; difficulty++)
boolean unfinished_stage = true ;
spriteManager = new SpriteManager(bgimage);
spriteManager.setParameters(difficulty, max_speed) ;
//Create 15 sprites from 6 gif
// files.
for (int cnt = 0; cnt < 15; cnt++)
if (cnt == 0)
Point position = new Point(
backGroundImage.getWidth(this)/2-gifImages[0].getWidth(this)/2,
backGroundImage.getHeight(this)/2-gifImages[0].getHeight(this)/2) ;
spriteManager.addSprite(makeSprite(position, 0, false));
else
Point position = spriteManager.
getEmptyPosition(new Dimension(gifImages[0].getWidth(this),
gifImages[0].getHeight(this)));
if (cnt < difficulty)
spriteManager.addSprite(makeSprite(position, 1, true));
else
spriteManager.addSprite(makeSprite(position, 2, true));
}//end for loop
time = System.currentTimeMillis();
while (!spriteManager.getFinishedStage() && !spriteManager.getGameOver())
// Loop, sleep, and update sprite
// positions once each 83
// milliseconds
spriteManager.update();
repaint();
try
time += animationDelay;
Thread.sleep(Math.max(0,time - System.currentTimeMillis()));
catch (InterruptedException e)
System.out.println(e);
}//end catch
}//end while loop
if (spriteManager.getGameOver())
message = 4 ;
while (message != 0)
spriteManager.update();
repaint();
try
time += animationDelay;
Thread.sleep(Math.max(0,time - System.currentTimeMillis()));
catch (InterruptedException e)
System.out.println(e);
}//end catch
you_lose = true ;
if (spriteManager.getFinishedStage())
message = 2 ;
while (message != 0)
spriteManager.update();
repaint();
try
time += animationDelay;
Thread.sleep(Math.max(0,time - System.currentTimeMillis()));
catch (InterruptedException e)
System.out.println(e);
}//end catch
} // end for difficulty loop
} // end for max_speed
} // end infinite loop
}//end run method
private Sprite makeSprite(Point position, int imageIndex, boolean wind)
return new Sprite(
this,
gifImages[imageIndex],
position,
new Point(rand.nextInt() % 5,
rand.nextInt() % 5),
wind);
}//end makeSprite()
//Overridden graphics update method
// on the Frame
public void update(Graphics g)
//Create the offscreen graphics
// context
if (offScreenGraphicsCtx == null)
offScreenImage = createImage(getSize().width,
getSize().height);
offScreenGraphicsCtx = offScreenImage.getGraphics();
}//end if
if (message == 0)
// Draw the sprites offscreen
spriteManager.drawScene(offScreenGraphicsCtx);
else if (message == 1)
pressStartSprite.drawSpriteImage(offScreenGraphicsCtx);
else if (message == 2)
NextStageSprite.drawSpriteImage(offScreenGraphicsCtx);
else if (message == 3)
GamePausedSprite.drawSpriteImage(offScreenGraphicsCtx);
else if (message == 4)
YouLoseSprite.drawSpriteImage(offScreenGraphicsCtx);
// Draw the scene onto the screen
if(offScreenImage != null)
g.drawImage(offScreenImage, 0, 0, this);
}//end if
}//end overridden update method
//Overridden paint method on the
// Frame
public void paint(Graphics g)
//Nothing required here. All
// drawing is done in the update
// method above.
}//end overridden paint method
// Methods to handle Keyboard event
public void keyPressed(KeyEvent evt)
int key = evt.getKeyCode(); // Keyboard code for the pressed key.
if (key == KeyEvent.VK_SPACE)
if (message != 0)
message = 0 ;
else
message = 3 ;
if (key == KeyEvent.VK_LEFT)
if (spriteManager != null)
spriteManager.goLeft() ;
else if (key == KeyEvent.VK_RIGHT)
if (spriteManager != null)
spriteManager.goRight() ;
else if (key == KeyEvent.VK_UP)
if (spriteManager != null)
spriteManager.goUp() ;
else if (key == KeyEvent.VK_DOWN)
if (spriteManager != null)
spriteManager.goDown() ;
if (spriteManager != null)
spriteManager.setMessage(message) ;
public void keyReleased(KeyEvent evt)
public void keyTyped(KeyEvent e)
char key = e.getKeyChar() ;
//~ if (key == 's')
//~ stop = true ;
//~ else if (key == 'c')
//~ stop = false ;
//~ spriteManager.setStop(stop) ;
}//end class Balls
//===================================//
class BackgroundImage
private Image image;
private Component component;
private Dimension size;
public BackgroundImage(
Component component,
Image image)
this.component = component;
size = component.getSize();
this.image = image;
}//end construtor
public Dimension getSize(){
return size;
}//end getSize()
public Image getImage(){
return image;
}//end getImage()
public void setImage(Image image){
this.image = image;
}//end setImage()
public void drawBackgroundImage(Graphics g)
g.drawImage(image, 0, 0, component);
}//end drawBackgroundImage()
}//end class BackgroundImage
//===========================
class SpriteManager extends Vector
private BackgroundImage backgroundImage;
private boolean finished_stage = false ;
private boolean game_over = false ;
private int difficulty ;
private int max_speed ;
public boolean getFinishedStage()
finished_stage = true ;
for (int cnt = difficulty ; cnt < size(); cnt++)
Sprite sprite = (Sprite)elementAt(cnt);
if (!sprite.getEaten())
finished_stage = false ;
return finished_stage ;
public boolean getGameOver() {return game_over ;}
public void setParameters(int diff, int speed)
difficulty = diff ;
max_speed = speed ;
finished_stage = false ;
game_over = false ;
Sprite sprite;
for (int cnt = 0;cnt < size(); cnt++)
sprite = (Sprite)elementAt(cnt);
sprite.setSpeed(max_speed) ;
public SpriteManager(BackgroundImage backgroundImage)
this.backgroundImage = backgroundImage ;
}//end constructor
public Point getEmptyPosition(Dimension spriteSize)
Rectangle trialSpaceOccupied = new Rectangle(0, 0,
spriteSize.width,
spriteSize.height);
Random rand = new Random(System.currentTimeMillis());
boolean empty = false;
int numTries = 0;
// Search for an empty position
while (!empty && numTries++ < 100)
// Get a trial position
trialSpaceOccupied.x =
Math.abs(rand.nextInt() %
backgroundImage.
getSize().width);
trialSpaceOccupied.y =
Math.abs(rand.nextInt() %
backgroundImage.
getSize().height);
// Iterate through existing
// sprites, checking if position
// is empty
boolean collision = false;
for(int cnt = 0;cnt < size(); cnt++)
Rectangle testSpaceOccupied = ((Sprite)elementAt(cnt)).getSpaceOccupied();
if (trialSpaceOccupied.intersects(testSpaceOccupied))
collision = true;
}//end if
}//end for loop
empty = !collision;
}//end while loop
return new Point(trialSpaceOccupied.x, trialSpaceOccupied.y);
}//end getEmptyPosition()
public void update()
Sprite sprite;
// treat special case of sprite #0 (the player)
sprite = (Sprite)elementAt(0);
sprite.updatePosition() ;
int hitIndex = testForCollision(sprite);
if (hitIndex != -1)
if (hitIndex < difficulty)
{ // if player collides with an hunter (red ball), he loose
sprite.setEaten() ;
game_over = true ;
else
// if player collides with an hunted (green ball), he eats the green
((Sprite)elementAt(hitIndex)).setEaten() ;
//Iterate through sprite list
for (int cnt = 1;cnt < size(); cnt++)
sprite = (Sprite)elementAt(cnt);
//Update a sprite's position
sprite.updatePosition();
//Test for collision. Positive
// result indicates a collision
hitIndex = testForCollision(sprite);
if (hitIndex >= 0)
//a collision has occurred
bounceOffSprite(cnt,hitIndex);
}//end if
}//end for loop
}//end update
public void setMessage(int message)
Sprite sprite;
//Iterate through sprite list
for (int cnt = 0;cnt < size(); cnt++)
sprite = (Sprite)elementAt(cnt);
//Update a sprite's stop status
sprite.setMessage(message);
}//end for loop
}//end update
public void goLeft()
Sprite sprite = (Sprite)elementAt(0);
sprite.goLeft() ;
public void goRight()
Sprite sprite = (Sprite)elementAt(0);
sprite.goRight() ;
public void goUp()
Sprite sprite = (Sprite)elementAt(0);
sprite.goUp() ;
public void goDown()
Sprite sprite = (Sprite)elementAt(0);
sprite.goDown() ;
private int testForCollision(Sprite testSprite)
//Check for collision with other
// sprites
Sprite sprite;
for (int cnt = 0;cnt < size(); cnt++)
sprite = (Sprite)elementAt(cnt);
if (sprite == testSprite)
//don't check self
continue;
//Invoke testCollision method
// of Sprite class to perform
// the actual test.
if (testSprite.testCollision(sprite))
//Return index of colliding
// sprite
return cnt;
}//end for loop
return -1;//No collision detected
}//end testForCollision()
private void bounceOffSprite(int oneHitIndex, int otherHitIndex)
//Swap motion vectors for
// bounce algorithm
Sprite oneSprite = (Sprite)elementAt(oneHitIndex);
Sprite otherSprite = (Sprite)elementAt(otherHitIndex);
Point swap = oneSprite.getMotionVector();
oneSprite.setMotionVector(otherSprite.getMotionVector());
otherSprite.setMotionVector(swap);
}//end bounceOffSprite()
public void drawScene(Graphics g)
//Draw the background and erase
// sprites from graphics area
//Disable the following statement
// for an interesting effect.
backgroundImage.drawBackgroundImage(g);
//Iterate through sprites, drawing
// each sprite
for (int cnt = 0;cnt < size(); cnt++)
((Sprite)elementAt(cnt)).drawSpriteImage(g);
}//end drawScene()
public void addSprite(Sprite sprite)
addElement(sprite);
}//end addSprite()
}//end class SpriteManager
//===================================//
class Sprite
private Component component;
private Image image;
private Rectangle spaceOccupied;
private Point motionVector;
private Rectangle bounds;
private Random rand;
private int message = 0 ; // number of message currently displayed (0 means "no message" = normal game)
private int max_speed = 7 ;
private boolean eaten = false ; // when a green sprite is eaten, it is no longer displayed on screen
private boolean wind = true ;
private boolean go_left = false ;
private boolean go_right = false ;
private boolean go_up = false ;
private boolean go_down = false ;
public Sprite(Component component,
Image image,
Point position,
Point motionVector,
boolean Wind
//Seed a random number generator
// for this sprite with the sprite
// position.
rand = new Random(position.x);
this.component = component;
this.image = image;
setSpaceOccupied(new Rectangle(
position.x,
position.y,
image.getWidth(component),
image.getHeight(component)));
this.motionVector = motionVector;
this.wind = Wind ;
//Compute edges of usable graphics
// area in the Frame.
int topBanner = ((Container)component).getInsets().top;
int bottomBorder = ((Container)component).getInsets().bottom;
int leftBorder = ((Container)component).getInsets().left;
int rightBorder = ((Container)component).getInsets().right;
bounds = new Rectangle( 0 + leftBorder, 0 + topBanner
, component.getSize().width - (leftBorder + rightBorder)
, component.getSize().height - (topBanner + bottomBorder));
}//end constructor
public void setMessage(int message_number)
message = message_number ;
public void setSpeed(int speed)
max_speed = speed ;
public void goLeft()
go_left = true ;
public void goRight()
go_right = true ;
public void goUp()
go_up = true ;
public void goDown()
go_down = true ;
public void setEaten()
eaten = true ;
setSpaceOccupied(new Rectangle(4000,4000,0,0)) ;
public boolean getEaten()
return eaten ;
public Rectangle getSpaceOccupied()
return spaceOccupied;
}//end getSpaceOccupied()
void setSpaceOccupied(Rectangle spaceOccupied)
this.spaceOccupied = spaceOccupied;
}//setSpaceOccupied()
public void setSpaceOccupied(
Point position){
spaceOccupied.setLocation(
position.x, position.y);
}//setSpaceOccupied()
public Point getMotionVector(){
return motionVector;
}//end getMotionVector()
public void setMotionVector(
Point motionVector){
this.motionVector = motionVector;
}//end setMotionVector()
public void setBounds(Rectangle bounds)
this.bounds = bounds;
}//end setBounds()
public void updatePosition()
Point position = new Point(spaceOccupied.x, spaceOccupied.y);
if (message != 0)
return ;
//Insert random behavior. During
// each update, a sprite has about
// one chance in 10 of making a
// random change to its
// motionVector. When a change
// occurs, the motionVector
// coordinate values are forced to
// fall between -7 and 7. This
// puts a cap on the maximum speed
// for a sprite.
if (!wind)
if (go_left)
motionVector.x -= 2 ;
if (motionVector.x < -15)
motionVector.x = -14 ;
go_left = false ;
if (go_right)
motionVector.x += 2 ;
if (motionVector.x > 15)
motionVector.x = 14 ;
go_right = false ;
if (go_up)
motionVector.y -= 2 ;
if (motionVector.y < -15)
motionVector.y = -14 ;
go_up = false ;
if (go_down)
motionVector.y += 2 ;
if (motionVector.y > 15)
motionVector.y = 14 ;
go_down = false ;
else if(rand.nextInt() % 7 == 0)
Point randomOffset =
new Point(rand.nextInt() % 3,
rand.nextInt() % 3);
motionVector.x += randomOffset.x;
if(motionVector.x >= max_speed)
motionVector.x -= max_speed;
if(motionVector.x <= -max_speed)
motionVector.x += max_speed ;
motionVector.y += randomOffset.y;
if(motionVector.y >= max_speed)
motionVector.y -= max_speed;
if(motionVector.y <= -max_speed)
motionVector.y += max_speed;
}//end if
//Move the sprite on the screen
position.translate(motionVector.x, motionVector.y);
//Bounce off the walls
boolean bounceRequired = false;
Point tempMotionVector = new Point(
motionVector.x,
motionVector.y);
//Handle walls in x-dimension
if (position.x < bounds.x)
bounceRequired = true;
position.x = bounds.x;
//reverse direction in x
tempMotionVector.x = -tempMotionVector.x;
else if ((position.x + spaceOccupied.width) > (bounds.x + bounds.width))
bounceRequired = true;
position.x = bounds.x +
bounds.width -
spaceOccupied.width;
//reverse direction in x
tempMotionVector.x =
-tempMotionVector.x;
}//end else if
//Handle walls in y-dimension
if (position.y < bounds.y)
bounceRequired = true;
position.y = bounds.y;
tempMotionVector.y = -tempMotionVector.y;
else if ((position.y + spaceOccupied.height)
> (bounds.y + bounds.height))
bounceRequired = true;
position.y = bounds.y +
bounds.height -
spaceOccupied.height;
tempMotionVector.y =
-tempMotionVector.y;
}//end else if
if(bounceRequired)
//save new motionVector
setMotionVector(
tempMotionVector);
//update spaceOccupied
setSpaceOccupied(position);
}//end updatePosition()
public void drawSpriteImage(Graphics g)
if (!eaten)
g.drawImage(image,
spaceOccupied.x,
spaceOccupied.y,
component);
}//end drawSpriteImage()
public boolean testCollision(Sprite testSprite)
//Check for collision with
// another sprite
if (testSprite != this)
return spaceOccupied.intersects(
testSprite.getSpaceOccupied());
}//end if
return false;
}//end testCollision
}//end Sprite class
//===================================//
Thanks for your help...Sorry,
Can you tell me how do you solve it because I have got the same problem.
Can you indicate me the topic where did you find solution.
Thank in advance. -
To improve the system performance of the code
Please help me to improve the system performance of the following program. its very urgent
report zsdr0125
no standard page heading
* LINE-SIZE 170 " SIR 061880
line-size 210 " SIR 061880
line-count 58
message-id zz.
** Report header ******************************************************
** Report name: Activity Costing Report
** Report id: RO-01148
** Designed/Coded. Tori Chandler. Reporting Team.
** Date: March 01, 2000.
** Original SIR: 016113
** Application Area: V - Sales & Distribution (OTC)
** Correction/Transport: D10K951579
** Description: It is normal business practice for logistics
** operations to charge business units for the activity
** incurred on their behalf. This is consistent with
** activity based costing principles between BU and
** shared resources. The activities involved are picking
** storage, shipping and receiving. The purpose of this
** report is to provide data for the first 3.
** QRB2 - 03/13/2000 - Tracy, Antoine, Christian, Tori
** History:
* 06/14/2001 SIR 032383 CTS Antoine Dailly
* A plant (WERKS) can have several Distrib points (VSTEL)
* SIGN = 032383
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 034606 D10K979189 Logistics Activity report
* Logistics Activity reports
* We added fields ship to customer and country and we also make another
* total
* QRB2 Tracy L. Obrien
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 37838 D10K982890 Select only
* material type HALB
*06/12/2002 T OBrien 38784 D10K988181
* Allow option to get material weight from Master data or
* from the delivery.
* Modified by SIR CTS Date
* Jim Harwood 42730 D10K993119 10 Oct 2002
* Description: Code amended to default the Goods Issue Date range to
* the previous month. Also amended to print out the Select Options.
* Modified by SIR CTS Date
* Jim Harwood 44381 D10K994598 18 Nov 2002
* Description: Correct date range processing. APPEND statement added
* so that record is added ot internal table S_WADAT. Also S_VKORG
* removed as it was NO DISPLAY and nothing was assigned to it. It's use
* in an SQL call may be causing the wrong optimization.
* Modified by SIR CTS Date
* Tori Chandler 45567 D10K995875 03 Jan 2003
* Description: Correct reporting of weights for non-pickable items
* when the Material Master Data radiobutton is selected. Also found
* from SIR 37838, that material type is hardcoded on the LIPS. I
* created a new select option and the person needing the report
* can control if they want only HALB or all line items. Also,
* because of this the delivery weight is obtain from header,
* changing to accumulate from LIPS to match which lines are selected
* QRB2: 1/15/2003: Eileen, Jerome and Tori
*{ INSERT D11K901833 1
* Modified by Sir CTS Date
* Sue Kastan 48712/054042 D11K901833 28 Aug, 2003
* Fix overcounting of records from LIPS
*} INSERT
* Modified by SIR CTS Date *
* Vijay Andea 061880 D11K918628 04/20/2006 *
* D11K946194 *
* Description: Enhence ZSDR0125 Activity Cost Driver Report to allow *
* Analysis by Product Groupings. *
*} INSERT
* Modified by SIR CTS Date *
* Prakash Arunachalam 091510 D11K950288 09/26/2006 *
* Description: Correct Activity Cost report - material weight *
* calculation *
* Modified by SIR CTS Date *
* Murali Krishna 301978 D50K903293 01/20/2008
* Description: Improve the system performance of this report and
* clean-up of code into various form routine
* Table declaration.
tables: likp, " SD Document: Delivery Header Data
lips, " SD document: Delivery: Item data
vepo, " SD Document: Shipping Unit Item (Content)
vekp, " SD Document: Shipping Unit Header
knvv, " Customer Master Sales Data
kna1, " General Data in Customer Master SIR 34606
marm, " Units of Measure
mara, " Material Master: General Data SIR 38784
t001l, " Stge locs
t001k, " Valuation area
tvswz, " Shipping Points per Plant
t134, " Material types
z0234. " Alternative Unit of Measure
*** Selection screen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_werks like t001l-werks obligatory memory id wrk.
select-options: s_lgort for t001l-lgort,
* S_VKORG FOR TVKO-VKORG NO-DISPLAY ," SIR 34606, 42730
* S_WADAT FOR LIKP-WADAT_IST OBLIGATORY NO-EXTENSION,
s_wadat for likp-wadat_ist no-extension, " SIR 42730
s_mtart for t134-mtart, " SIR 45567
s_lfart for likp-lfart no-display no intervals.
selection-screen skip 2.
selection-screen comment 1(21) text-002. " SIR 38784
parameters: p_delwt radiobutton group grp1, " SIR 38784
p_mstwt radiobutton group grp1. " SIR 38784
*--------------------------------------------------*Start of SIR 061880
selection-screen skip 2.
selection-screen comment 1(21) text-006.
parameters: p_voldl radiobutton group 2, " Volume from Delivery
p_volmd radiobutton group 2. " Volume from Master Data
*-----------------------------------------------------End of SIR 061880
selection-screen end of block b1.
*--------------------------------------------------*Start of SIR 061880
selection-screen begin of block b2 with frame title text-007.
select-options: s_cbuun for knvv-kvgr1 no intervals, " Customer BU
s_mbuun for mara-prdha+1(2) no intervals, " Material BU
s_lobus for mara-prdha+3(3) no intervals, " LOB
s_pac1 for mara-prdha+6(3) no intervals. " PAC1
selection-screen end of block b2.
*----------------------------------------------------*End of SIR 061880
*---Type Declaration for Internal Tables------------------------------*
types: begin of t_likp,
vbeln like likp-vbeln, " delivery
vstel like likp-vstel, " shipping point
lfart like likp-lfart, " delivery type
vkorg like likp-vkorg, " Sales organization
kunag like likp-kunag, " sold-to party
kunnr like likp-kunnr, " ship to party SIR 34606
btgew like likp-btgew, " Delivery weight
gewei like likp-gewei, " Unit of weight
anzpk like likp-anzpk, " Number of Packages SIR 61880
volum like likp-volum, " Delivery Volume SIR 61880
voleh like likp-voleh, " Volume Unit SIR 61880
vtwiv like likp-vtwiv, " Distribution channel
spaiv like likp-spaiv, " Division
wadat_ist like likp-wadat_ist, " actual goods issue date
del_flg(1) type c, "(+) SIR 301978
end of t_likp.
types: begin of t_lips,
vbeln like lips-vbeln, " delivery
posnr like lips-posnr, " delivery line
matnr like lips-matnr, " material
lgort like lips-lgort, " storage location
prodh like lips-prodh, " product hierarchy
meins like lips-meins, " base UoM
brgew like lips-brgew, " Material weight
gewei like lips-gewei, " Unit of weight
volum like lips-volum, " Material Volume SIR 61880
voleh like lips-voleh, " Volume Unit SIR 61880
lgmng like lips-lgmng, " actual delivery quantity
komkz like lips-komkz, " Indicator for picking control
mtart like lips-mtart, " Material type " SIR 37838
del_flg(1) type c, "(+) SIR 301978
end of t_lips.
types: begin of t_vepo,
venum like vepo-venum, " shipping unit number
vbeln like vepo-vbeln, " delivery
end of t_vepo.
types: begin of t_vekp,
venum like vekp-venum, " shipping unit number
brgew like vekp-brgew, " actual weight
gewei_max like vekp-gewei_max, " unit of weight
vpobjkey like vekp-vpobjkey, " key for assigned object
end of t_vekp.
types: begin of t_knvv,
kunnr like knvv-kunnr, " customer number
ktgrd like knvv-ktgrd, " acct assign group
kvgr1 like knvv-kvgr1, " customer group 1
end of t_knvv.
types: begin of t_kna1, " SIR 34606
kunnr like kna1-kunnr, " customer number " SIR 34606
land1 like kna1-land1, " contry " SIR 34606
end of t_kna1. " SIR 34606
types: begin of t_marm,
matnr like marm-matnr, " material
meinh like marm-meinh, " Alt unit of measure 032383
umrez like marm-umrez, " numerator
umren like marm-umren, " denominator
end of t_marm.
types: begin of t_mara, " SIR 38784
matnr like mara-matnr, " material " SIR 38784
prdha like mara-prdha, " Product Hierarchy " SIR 61880
brgew like lips-brgew, " gross weight " SIR 38784
gewei like mara-gewei, " Unit of weight " SIR 38784
volum like mara-volum, " Volume " SIR 61880
voleh like mara-voleh, " Volume Unit " SIR 61880
del_flg(1) type c, "(+) SIR 301978
end of t_mara. " SIR 38784
types: begin of t_tvswz,
vstel like tvswz-vstel, " shipping point
end of t_tvswz.
types: begin of t_z0234, "032383
vstel like z0234-vstel, " shipping point 032383
zpaluom like z0234-zpaluom," pallet unit of measure 032383
zcsuom like z0234-zcsuom," Case unit of measure 032383
end of t_z0234. "032383
types: begin of t_output_dt,
wadat_ist like likp-wadat_ist, " Goods issue date
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
kunnr like kna1-kunnr," ship to location SIR 34606
land1 like kna1-land1," ship to location SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_dt.
types: begin of t_output_ag,
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
land1 like kna1-land1," country SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_ag.
types: begin of t_output_gs, " SIR 34606
ktgrd like knvv-ktgrd," acct assign group " SIR 34606
bu like knvv-kvgr1," business unit " SIR 34606
d_btgew like likp-btgew," delivery weight " SIR 34606
m_brgew like lips-brgew," material weight " SIR 34606
a_brgew like vekp-brgew," actual weight " SIR 34606
num_del type i, " counter of deliv " SIR 34606
num_pallets type i, " number of pallets " SIR 34606
num_cases type i, " number of cases " SIR 34606
num_loose type i, " loose quantity " SIR 34606
num_delln type i, " counter of deliv " SIR 34606
* packages like likp-anzpk, " Number of Package " SIR 61880
packages(3) type p, " Number of Packages" SIR 61880
volume like lips-volum, " Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_gs. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Material Type
types: begin of t_mtart,
mtart like t134-mtart, " Material Type
end of t_mtart.
* Customer Business Unit.
types: begin of t_kvgr1,
kvgr1 like knvv-kvgr1, " Customer Group 1
end of t_kvgr1.
* sales Organization.
types: begin of t_lgort,
lgort like t001l-lgort, " Sales Organization
end of t_lgort.
* Begin of SIR 301978
* Header: Material Document
types: begin of t_mkpf,
vgart type mkpf-vgart,
xblnr type likp-vbeln,
end of t_mkpf.
* End of SIR 301978
*---------------------------------------------------* End of SIR 061880
*---Internal Tables---------------------------------------------------*
data: i_likp type t_likp occurs 0 with header line,
i_temp_likp type t_likp occurs 0 with header line,
v_likp type t_likp,
i_lips type t_lips occurs 0 with header line,
i_temp_lips type t_lips occurs 0 with header line,
v_lips type t_lips,
i_vepo type t_vepo occurs 0,
* V_VEPO TYPE T_VEPO,
i_vekp type t_vekp occurs 0,
v_vekp type t_vekp,
i_knvv type t_knvv occurs 0 with header line,
v_knvv type t_knvv,
i_kna1 type t_kna1 occurs 0, " SIR 34606
v_kna1 type t_kna1, " SIR 34606
i_z0234 type t_z0234 occurs 0, " 032383
v_z0234 type t_z0234, " 032383
i_z0234_uom type t_z0234 occurs 0, " 032383
v_z0234_uom type t_z0234, " 032383
i_marm type t_marm occurs 0 with header line," SIR 61880
i_marm_pallet type t_marm occurs 0 with header line,
v_marm_pallet type t_marm,
i_marm_case type t_marm occurs 0 with header line,
v_marm_case type t_marm,
*-------------------------------------------------* Begin of SIR 061880
* I_MARA TYPE T_MARA OCCURS 0, " SIR 38784
i_mara1 type t_mara occurs 0 with header line,
i_mtart type t_mtart occurs 0 with header line,
i_kvgr1 type t_kvgr1 occurs 0 with header line,
i_lgort type t_lgort occurs 0 with header line,
v_kvgr1 type t_kvgr1,
*---------------------------------------------------* End of SIR 061880
v_mara type t_mara, " SIR 38784
i_tvswz type t_tvswz occurs 0,
v_tvswz type t_tvswz, "(+) SIR 301978
i_output_dt type t_output_dt occurs 0,
v_output_dt type t_output_dt,
i_output_ag type t_output_ag occurs 0,
v_output_ag type t_output_ag,
i_output_gs type t_output_gs occurs 0, " SIR 34606
v_output_gs type t_output_gs, " SIR 34606
i_mkpf type table of t_mkpf with header line."SIR 301978
*** Data Declarations *
data: v_page(3) type c, " Page Counter
v_comp like t001k-bukrs, " zbsn0001 company code
v_title(24) type c, " zbsn0001 report title
v_rpttyp type c, " report type
v_ok type c, " control While... endwhile
v_diff_date type p, " days between selection
v_werks like t001l-werks, " plant
* v_z0234_zpaluom like z0234-zpaluom, " Pallet Unit of Measure
* v_z0234_zcsuom like z0234-zcsuom, " Case Unit of Measure
v_palwto type p decimals 6, " SIR 091510
* "like likp-btgew, " Weight after conversion
v_vekp_tabix like sy-tabix, " index on read
v_vekp_sum_brgew like vekp-brgew, " actual weight
v_pallet_qty like lips-lgmng, " calculated pallet qty
v_pallet_integer type i, " true pallet qty
v_case_qty like lips-lgmng, " calculated case qty
v_case_integer type i, " true case qty
v_qty_not_pallets like lips-lgmng, " calculated
v_num_pallets like lips-lgmng, " calculated nbr of pallets
v_num_pallets_int type i, " true nbr of pallets
v_num_cases like lips-lgmng, " calculated nbr of cases
v_num_cases_int type i, " true nbr of cases
v_total_case_qty like lips-lgmng, " case quantity
v_loose_qty type i, " calculated loose quantity
*-------------------------------------------------* Begin of SIR 061880
v_volume like lips-volum, " Volume After Convertion
v_cbuun like knvv-kvgr1, " Customer BU
v_mbuun like knvv-kvgr1, " Material BU
v_lobus(3) type c, " Line of Business
v_pac1(3) type c, " PAC1
v_flag type c. " Flag Indicator for No Data
*---------------------------------------------------* End of SIR 061880
* Begin of SIR 301978
* Ranges
ranges : r_vstel for tvswz-vstel.
* End of SIR 301978
* Constants
data: c_uom(3) type c value 'KG'. " Kilogram Unit of Meas.
data : c_vom like mara-voleh value 'M3'. " Metter Cube. " SIR 061880
constants : c_wl(2) type c value 'WL'. "(+) SIR 301978
* Initialization.
initialization.
s_lfart-sign = 'I'.
s_lfart-option = 'EQ'.
s_lfart-low = 'LF '.
append s_lfart.
s_lfart-low = 'NL '.
append s_lfart.
s_lfart-low = 'NLCC'.
append s_lfart.
s_lfart-low = 'ZLFI'.
append s_lfart.
* AT SELECTION-SCREEN.
at selection-screen.
* SIR 42730 - If no Goods Issue Date has been specified in the
* Select Options set the range to the previous month.
if s_wadat-low is initial.
s_wadat-sign = 'I'.
s_wadat-option = 'BT'.
s_wadat-high = sy-datum. " Today's date
s_wadat-high+6(2) = '01'. " First of this month
s_wadat-high = s_wadat-high - 1. " End of last month
s_wadat-low = s_wadat-high. " End of last month
s_wadat-low+6(2) = '01'. " First of last month
append s_wadat.
endif. " SIR 42730 IF S_WADAT-LOW IS INITIAL.
clear v_werks. "(+) SIR 301978
* Validate Plant/Storage Location from selection screen
select werks up to 1 rows into v_werks from t001l
where werks = p_werks and
lgort in s_lgort.
endselect.
if sy-subrc ne 0.
message e045 with text-e01.
endif.
* Validate Storage Location
if not s_lgort[] is initial.
select lgort from t001l into table i_lgort where lgort in s_lgort.
if sy-subrc ne 0.
message e045 with text-e09.
endif.
endif.
* Validate date range. do not allow more that 31 days
if not s_wadat-high is initial.
v_diff_date = s_wadat-high - s_wadat-low.
if v_diff_date >= '31'.
message e045 with text-e02.
endif.
endif.
*-------------------------------------------------* Begin of SIR 061880
* Validation for Material Type in Selection Screen
if not s_mtart[] is initial.
select mtart from t134 into table i_mtart where mtart in s_mtart.
if sy-subrc ne 0.
message e045 with text-e07.
endif.
endif.
at selection-screen on block b2.
* Validation for Material Business Unit and Customer Business Unit.
if s_cbuun-low is not initial and s_mbuun-low is not initial.
message e045 with text-e05.
endif.
* Validation for Possible combinations of Material BU, Line of Business
* and PAC1
if ( s_mbuun-low is not initial and s_lobus-low is not initial
and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_lobus-low is not initial )
or ( s_lobus-low is not initial and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_pac1-low is not initial ).
message e045 with text-e06.
endif.
* Validation for Customer Business Unit.
if not s_cbuun[] is initial.
select kvgr1 from tvv1 into table i_kvgr1 where kvgr1 in s_cbuun.
if sy-subrc ne 0.
message e045 with text-e08.
endif.
* free: i_kvgr1.
endif.
*---------------------------------------------------- End of SIR 061880
* TOP-OF-PAGE
* Top of the page routine to print the headers and columns
top-of-page.
format color col_heading on.
if v_rpttyp = 'D'.
v_title = text-h01.
else.
v_title = text-h02.
endif.
perform zbsn0001_standard_header " Standard Report Heading Form
using v_comp v_title 'U' v_page.
skip.
if v_rpttyp = 'D'.
perform write_dtlvl_headings.
else.
perform write_aglvl_headings.
endif.
* FORM WRITE_DTLVL_HEADINGS *
* for date detail level, print the column headers *
form write_dtlvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
007 text-h07, " Date
017 text-h08, " BU
021 text-h17, " ship to party 34606
030 text-h18, " country
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*----------------------------------------------------Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_dtlvl_headings.
* FORM WRITE_AGLVL_HEADINGS *
* for account group detail level, print the column headers *
form write_aglvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
017 text-h08, " BU
030 text-h18, " country SIR 34606
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*---------------------------------------------------*Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_aglvl_headings.
*-------------------------- SUBBROUTINES -----------------------------*
include zbsn0001. " Include to print all Standard Report Titles
include zsdn0004. " Print the Select Options
*** MAIN SELECTION. *
start-of-selection.
refresh: i_likp, i_temp_likp, i_lips, i_temp_lips, i_vepo,
i_vekp, i_knvv, i_marm_pallet, i_marm_case, i_tvswz,
i_output_dt, i_output_ag, i_mara1.
clear: v_likp, v_lips, v_vekp, v_knvv, v_mara,
v_marm_pallet, v_marm_case, v_output_dt, v_output_ag.
v_rpttyp = 'D'.
* SIR 42730 - Echo the Select Options to the output listing and print
* the Goods Issue Date range being used.
write: /,/. " SIR 43730 - Skip a couple of lines to centre it.
perform zsdn0004_print_select_options using sy-cprog ' '.
if s_wadat-high is initial.
write: /,/, text-003, 34 s_wadat-low.
else.
write: /,/, text-003, 34 s_wadat-low, 44 text-004, 47 s_wadat-high.
endif.
new-page.
* Main Processing. *
perform get_data.
if not i_lips[] is initial.
perform create_output.
endif.
* END-OF-SELECTION
end-of-selection.
*-------------------------------------------------* Start of SIR 061880
* PERFORM WRITE_REPORT.
if not i_output_dt[] is initial and not i_output_ag[] is initial and
not i_output_gs[] is initial.
perform write_report.
else.
skip 2.
write:/ text-e03.
skip 2.
uline.
clear: v_flag.
endif.
*---------------------------------------------------* End of SIR 061880
* FORM GET_DATA *
* build all of the internal tables needed for the report *
* selects on t001k, z0234, likp, lips, vepo, vekp, knvv & marm, mara *
form get_data.
perform get_data_t001k. " SIR 301978
perform get_data_tvswz. " SIR 301978
if sy-subrc = 0. " Build shipping point range
perform get_data_Z0234. " SIR 301978
if sy-subrc ne 0.
v_flag = 'X'.
* stop.
else.
sort i_z0234 by vstel. " 032383
endif.
* Begin of SIR 301978
* The data retrievalfrom LIKP has been modified for performance
* reasons
perform get_data_mkpf. " SIR 301978
if sy-subrc eq 0.
* Deleting data other than Goods issued for delivery
delete i_mkpf where vgart ne c_wl.
sort i_mkpf by xblnr.
endif.
* Deleting the data from the internal table i_likp by comparing
* shipping point
r_vstel-sign = 'I'.
r_vstel-option = 'EQ'.
clear : v_tvswz.
loop at i_tvswz into v_tvswz.
r_vstel-low = v_tvswz-vstel.
append r_vstel.
endloop.
if not i_mkpf[] is initial.
perform get_data_likp. " SIR 301978
endif.
if sy-subrc = 0.
delete i_likp where not lfart in s_lfart.
* End of SIR 301978
* Get data for the delivery lines
if not i_likp[] is initial.
perform get_data_lips. " SIR 301978
* Begin of SIR 301978
if i_lips[] is initial.
v_flag = 'X'.
message i089 with text-i02.
leave list-processing.
endif. " Return code for LIPS select
* End of SIR 301978
endif.
*-------------------------------------------------* Begin of SIR 061880
* Get Data From MARA (Material Master) to Read Material Weight and
* Material Voluem from Master Data.
if not i_lips[] is initial.
* Begin of SIR 301978
* Delete the duplicate material from delivery item table
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
perform get_data_mara. " SIR 301978
if sy-subrc = 0.
sort i_mara1 by matnr.
clear i_temp_lips.
refresh i_temp_lips.
* End of SIR 301978
else.
v_flag = 'X'.
message i089 with text-i01.
leave list-processing.
endif.
endif.
* Filter I_LIPS and I_MARA1 When Either material BU or Line of
* Business (LOB) or PAC1 are not left Balnk
perform filter_data_for_prdha.
* Get data for the sold-to customer
perform i_knvv_fill_data.
* Filter I_LIKP & I_LIPS & I_MARA for Cust-BU, When Cust-Bu is not
* left Blank.
perform filter_likp_lips_mara_custbu.
*---------------------------------------------------- End of SIR 061880
*-------------------------------------------------* Begin of SIR 034606
* Get data for the ship to party
i_temp_likp[] = i_likp[].
sort i_temp_likp by kunnr.
delete adjacent duplicates from i_temp_likp comparing kunnr.
perform get_data_kna1. " SIR 301978
if sy-subrc = 0.
sort i_kna1 by kunnr.
endif.
*---------------------------------------------------* End of SIR 034606
else.
v_flag = 'X'.
message i089 with text-i04.
leave list-processing.
endif. " return code to LIKP select
* endif. " SIR 061880
free: i_temp_likp.
endif. " return code for TVSWZ select
* Process table LIPS
if not i_lips[] is initial.
i_temp_lips[] = i_lips[].
sort i_temp_lips by vbeln.
delete adjacent duplicates from i_temp_lips comparing vbeln.
* Get actual weight
perform get_data_vepo. " SIR 301978
if sy-subrc = 0.
sort i_vepo by venum.
delete adjacent duplicates from i_vepo comparing venum.
perform get_data_vekp. " SIR 301978
sort i_vekp by vpobjkey.
endif.
free: i_vepo, i_temp_lips.
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
* Get Units of Measure for Material
perform read_data_from_marm. " SIR 061880
* Begin of SIR 032383
i_z0234_uom = i_z0234.
sort i_z0234_uom by zpaluom.
delete adjacent duplicates from i_z0234_uom comparing zpaluom.
* End of SIR 032383
clear i_marm_pallet. " SIR 061880
refresh i_marm_pallet. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Pallets
perform i_marm_pallet_fill.
endloop. "ENDLOOP Z0234 032383
** get alternative UoM for pallets
* SELECT MATNR " material
* MEINH " Alt unit of measure " 032383
* UMREZ " numerator
* UMREN " denominator
** into table i_marm_pallet " 032383
* APPENDING TABLE I_MARM_PALLET "032383
* FROM MARM
* FOR ALL ENTRIES IN I_TEMP_LIPS
* WHERE MATNR = I_TEMP_LIPS-MATNR AND
** meinh = v_z0234_zpaluom. " 032383
* MEINH = V_Z0234_UOM-ZPALUOM. " 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_pallet by matnr meinh.
free i_z0234_uom. "032383
i_z0234_uom = i_z0234. "032383
sort i_z0234_uom by zcsuom. "032383
delete adjacent duplicates from i_z0234_uom comparing zcsuom."32383
clear i_marm_case. " SIR 061880
refresh i_marm_case. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Cases
perform i_marm_case_fill.
endloop. "ENDLOOP Z0234 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_case by matnr meinh.
else.
v_flag = 'X'.
message i089 with text-i02.
* leave list-processing.
endif. " table LIPS is empty
endform. " get_data
* FORM CREATE_OUTPUT *
* process internal table LIPS, for each delivery/delivery lines create*
* an output record and collect into i_output internal table. Fields *
* used for header are goods issue date, acct assign, BU for customer, *
* total weight, total weight for shipping unit and count of *
* deliveries, the remaining fields will have a value of zero for the *
* collect. For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form create_output.
*-------------------------------------------------* Begin of SIR 061880
sort i_mara1 by matnr.
sort i_lips by vbeln posnr matnr.
sort i_likp by vbeln.
sort i_z0234 by vstel.
sort i_knvv by kunnr.
sort i_kna1 by kunnr.
sort i_vekp by vpobjkey.
sort i_marm_pallet by matnr meinh.
sort i_marm_case by matnr meinh.
* LOOP AT I_LIPS INTO V_LIPS.
loop at i_lips.
clear v_lips.
v_lips = i_lips.
*---------------------------------------------------* End of SIR 061880
at new vbeln.
perform collect_header_data.
endat.
if not v_lips-komkz is initial. " SIR 45567
perform collect_item_data.
endif. " SIR 45567
endloop.
endform. " create_output
* FORM COLLECT_HEADER_DATA *
* Fields used for header are goods issue date, acct assign, *
* BU for customer, total weight, total weight for shipping unit *
* and count ofdeliveries, the remaining fields will have a value of *
* zero for the collect. *
form collect_header_data.
clear: v_likp, v_knvv, v_vekp, v_vekp_sum_brgew.
v_ok = 'Y'.
read table i_likp into v_likp with key vbeln = v_lips-vbeln
binary search.
if sy-subrc = 0. " SIR 061880
clear v_z0234. "(+) SIR 301978
read table i_z0234 into v_z0234 "32383
with key vstel = v_likp-vstel "32383
binary search. "32383
read table i_knvv into v_knvv with key kunnr = v_likp-kunag
binary search.
if sy-subrc ne 0.
select single ktgrd kvgr1 into (v_knvv-ktgrd, v_knvv-kvgr1)
from knvv where kunnr = v_likp-kunag and
vkorg = v_likp-vkorg and
vtweg = '01' and " intercompany values
spart = '01'. " intercompany values
endif.
clear v_kna1. " SIR 34606
read table i_kna1 into v_kna1 " SIR 34606
with key kunnr = v_likp-kunnr " SIR 34606
binary search. " SIR 34606
read table i_vekp into v_vekp
with key vpobjkey(10) = v_likp-vbeln
binary search.
if sy-subrc = 0.
v_vekp_tabix = sy-tabix.
while v_ok = 'Y'.
if v_vekp-gewei_max ne c_uom.
perform z_unit_conversion
using v_vekp-brgew v_vekp-gewei_max c_uom v_palwto.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_palwto.
else.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_vekp-brgew.
endif.
v_vekp_tabix = v_vekp_tabix + 1.
read table i_vekp into v_vekp
index v_vekp_tabix.
if sy-subrc = 0.
if v_vekp-vpobjkey(10) ne v_likp-vbeln.
v_ok = 'N'.
endif.
else.
v_ok = 'N'.
endif.
endwhile.
endif.
endif. " SIR 061880
* populate output tables
clear: v_output_dt, v_output_ag,v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_KNVV-KVGR1.
* V_OUTPUT_AG-BU = V_KNVV-KVGR1.
* V_OUTPUT_GS-BU = V_KNVV-KVGR1. " SIR 34606
* Populate Business Unit,Line of Busness and PAC1 Values in Header Data
perform get_busunit_lobus_pac1_data1.
*---------------------------------------------------* End of SIR 061880
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
v_output_dt-a_brgew = v_vekp_sum_brgew.
v_output_ag-a_brgew = v_vekp_sum_brgew.
v_output_gs-a_brgew = v_vekp_sum_brgew. " SIR 34606
if s_mbuun[] is initial and " SIR 61880
s_lobus[] is initial and " SIR 61880
s_pac1[] is initial. " SIR 61880
v_output_dt-num_del = 1.
v_output_ag-num_del = 1.
v_output_gs-num_del = 1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Number of Packages
v_output_dt-packages = v_likp-anzpk.
v_output_ag-packages = v_likp-anzpk.
v_output_gs-packages = v_likp-anzpk.
else.
clear: v_output_dt-num_del,
v_output_ag-num_del,
v_output_gs-num_del,
v_output_dt-packages,
v_output_ag-packages,
v_output_gs-packages.
endif.
*---------------------------------------------------* End of SIR 061880
collect v_output_dt into i_output_dt.
collect v_output_ag into i_output_ag.
collect v_output_gs into i_output_gs. " SIR 34606
endform. " collect_header_data
* FORM COLLECT_ITEM_DATA *
* For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form collect_item_data.
clear: v_pallet_qty, v_pallet_integer,
v_case_qty, v_case_integer,
v_num_pallets, v_num_pallets_int,
v_num_cases, v_num_cases_int,
v_qty_not_pallets, v_total_case_qty, v_loose_qty.
read table i_marm_pallet into v_marm_pallet
with key matnr = v_lips-matnr
meinh = v_z0234-zpaluom binary search."32382
if sy-subrc = 0.
v_pallet_qty = v_marm_pallet-umrez / v_marm_pallet-umren.
* round down partial pallets
v_pallet_integer = v_pallet_qty - '.499'.
endif.
read table i_marm_case into v_marm_case
with key matnr = v_lips-matnr
meinh = v_z0234-zcsuom binary search."32382
if sy-subrc = 0.
v_case_qty = v_marm_case-umrez / v_marm_case-umren.
* round down partial cases
v_case_integer = v_case_qty - '.499'.
endif.
if v_pallet_integer > 0.
v_num_pallets = v_lips-lgmng / v_pallet_integer.
v_num_pallets_int = v_num_pallets - '.499'.
endif.
v_qty_not_pallets = v_lips-lgmng -
( v_num_pallets_int * v_pallet_integer ).
if v_case_integer > 0.
v_num_cases = v_qty_not_pallets / v_case_integer.
v_num_cases_int = v_num_cases - '.499'.
endif.
v_total_case_qty = v_num_cases_int * v_case_integer.
if v_qty_not_pallets = v_total_case_qty.
v_loose_qty = 0.
else.
v_loose_qty = 1.
endif.
* populate output tables
clear: v_output_dt, v_output_ag, v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_AG-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_GS-BU = V_LIPS-PRODH+1(2). " SIR 34606
* Populate Business Unit,Line of Business and PAC1 Values for Item Data.
perform get_busunit_lobus_pac1_data2.
if V_OUTPUT_DT-BU is initial.
clear V_OUTPUT_DT.
exit.
endif.
*---------------------------------------------------* End of SIR 061880
* get delivery weight from delivery lines instead of header " SIR 45567
if v_lips-gewei = c_uom.
v_output_dt-d_btgew = v_lips-brgew.
v_output_ag-d_btgew = v_lips-brgew.
v_output_gs-d_btgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-d_btgew = v_palwto.
v_output_ag-d_btgew = v_palwto.
v_output_gs-d_btgew = v_palwto. " SIR 34606
endif.
* Get material weight from delivery (LIPS)(IF P_DELWT = 'X')" SIR 38784
if p_delwt = 'X'. " SIR 38784
if v_lips-gewei = c_uom.
v_output_dt-m_brgew = v_lips-brgew.
v_output_ag-m_brgew = v_lips-brgew.
v_output_gs-m_brgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-m_brgew = v_palwto.
v_output_ag-m_brgew = v_palwto.
v_output_gs-m_brgew = v_palwto. " SIR 34606
endif.
else. " SIR 38784
* Get material weight from Master data (MARA) " SIR 38784
read table i_mara1 into v_mara " SIR 38784
with key matnr = v_lips-matnr " SIR 38784
binary search. " SIR 38784
if v_mara-gewei = c_uom. " SIR 38784
v_output_dt-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
else. " SIR 38784
perform z_unit_conversion " SIR 38784
using v_mara-brgew v_mara-gewei c_uom v_palwto. " SIR 38784
v_output_dt-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
endif. " SIR 38784
endif. " SIR 38784
*-------------------------------------------------* Begin of SIR 061880
* To Get the Volume Data.
perform get_volume_data.
*---------------------------------------------------* End of SIR 061880
v_output_dt-num_pallets = v_num_pallets_int.
v_output_ag-num_pallets = v_num_pallets_int.
v_output_gs-num_pallets = v_num_pallets_int. " SIR 34606
v_output_dt-num_cases = v_num_cases_int.
v_output_ag-num_cases = v_num_cases_int.
v_output_gs-num_cases = v_num_cases_int. " SIR 34606
v_output_dt-num_loose = v_loose_qty.
v_output_ag-num_loose = v_loose_qty.
v_output_gs-num_loose = v_loose_qty. " SIR 34606
*{ INSERT D11K901833 1
* Sir 054042/48712 insert code to put in 0 instead of 1 for collect
* value for delivery lines
if v_lips-lgmng = 0.
v_output_dt-num_delln = 0.
v_output_ag-num_delln = 0.
v_output_gs-num_delln = 0.
else.
* end of insert for 054042/48712
*} INSERT
v_output_dt-num_delln = 1.
v_output_ag-num_delln = 1.
v_output_gs-num_delln = 1.Since this is your first post, let me clue you in. This forum is meant for asking very short and specific questions. For example, if you've asked, how could you improve a particular one SELECT statement, I'm sure many people would have helped you.
But you cannot seriously expect someone on this forum to spend his/her time and review such a long program. For this people are normally getting paid, you know. -
How can I use the embeded GPS in my Sprint MiFi Hotspot for my location on my iPad4 wifi only device
The iPad uses the wifi network to determine the location My default connection is through my Sprint MiFi, but it does not use its location gps eventhough it is active for Maps. It did use a local tower in a wisconsin town yesterday and no it thinks I'm there and I cannot refresh it. I am brand new to apple IOS as I won the device last Thursday. I'm trying to upgrade the OS to 7 as it has 6 installed. I need to find a faster connection to do it though.
Any help wpuld be appreciatedRe: How can I get the best out of my battery life?
Hi,
When I make phone calls people on the other end have difficulty hearing me. They describe as they can hardly hear me as if I was speaking through the pillow etc). I am not touching any buttons and obviously it is not mute. This was happening couple of time in June, then every now and then. Recently it happened a few time in 2 weeks. I was trying to check if it was a reception issue but the place I spoke from is my office I make 70% of phone calls from. Can you book time for me in repair shop and address the issue.
Thank you.
Sergey Sinitsyn -
Is there a serious flaw in LRs Print Module?
I have been having no end of difficulty getting a decent print from LR. The more I search for answers the more I find that others have the same issue. It seems to be related mostly to Canon and HP printers. Most Epson users indicate they are getting great prints.
Multiple combinations of settings have been suggested (all from very helpful folks, thks!) but all attempts have not produced anything remotely close to whats on the screen. PSE3 prints perfectly for me, and other comments indicate that CS2&3 and PSE4&5 also deliver superior results to LR.
It seems that there a serious problem with LRs Print Module whereby it cannot interpret and convert profiles properly? Has this been officially addressed by Adobe? If so, please direct to where I can find that information, please.
Dont misunderstand me, LR is a fantastic program and a very powerful RAW workflow tool. Even the Print Module has some really cool stuff, but not so cool when the colours dont come out close to the original.
Where does one go from here to find a solution to this problem?Hi Dave
I posted this earlier in this thread about CS3 printing problems that Adobe has addressed and I just reviewed it again and noticed some common problems under the "Issues Fixed in this Release" as follows:
"Color matching is now correct on BPE printers (notably the Epson 3800) when Photoshop is set to handle color management."
"BPE Printers expect a Profile to be passed when Photoshop manages color. Photoshop now passes the Profile."
"Epson 2400 driver no longer does double color profiling when PS is handling the color management and we explicitly turn off Epson color management in the Print dialog."
"Color management will now produce identical results on Intel and PowerPC-based Macs."
"Correct Page Setup now comes up in the Print dialog when you change printers to print different documents."
"Page Setup would sometimes show the preferences for a previously selected printer."
"RGB to CMYK conversion with a specific ICC profile and Adobe(ACE) engine is fixed."
"Specific types of ICC profiles were being incorrectly converted. Converted images would appear close to black, if not entirely black."
These appear to be the same issues that are happening in LR that require a similar fix that CS3 required.
Here's the link again:
http://www.adobe.com/support/photoshop/ts/documents/kb402846/PhotoshopPrintingNotes.pdf -
How can I get the best out of my battery life?
There are a variety of things you can do to extend your device battery life, and use your phone for longer periods of time to see you through the day.
Set your screen to timeout after a period of inactivity. This way your phone is not sitting idle with the screen backlight consuming extra energy. The recommended screen timeout is 30 seconds, but most phones will allow from 15 seconds to 10 minutes.
Turn off location services (GPS), Wi-Fi and Bluetooth when not using these functions. When they're on, your phone constantly searches for your current location and open networks, which has a big impact on battery life.
Turn down the screen brightness. For example, on an iPhone 4 the lowest brightness setting gives roughly 6.5 hours of continuous use, whereas the highest setting gives roughly 3.5 hours. You can always adjust the brightness when you're outside so you can still see your screen clearly. Some devices have an auto-brightness setting, where the phone adjusts the screen brightness depending on the light around it.
Close your applications. On smartphones, returning to the ‘home' screen only minimises your apps – they keep running in the background. Closing your apps fully will save power; for example, on Samsung Galaxy devices hold down the home button for two seconds to see a list of all open apps. You can then swipe these to the left of the screen to exit them completely. On an Apple product, double press the home button to bring up all active applications and exit from there.Re: How can I get the best out of my battery life?
Hi,
When I make phone calls people on the other end have difficulty hearing me. They describe as they can hardly hear me as if I was speaking through the pillow etc). I am not touching any buttons and obviously it is not mute. This was happening couple of time in June, then every now and then. Recently it happened a few time in 2 weeks. I was trying to check if it was a reception issue but the place I spoke from is my office I make 70% of phone calls from. Can you book time for me in repair shop and address the issue.
Thank you.
Sergey Sinitsyn -
I'm getting the "No Free Channel available" error message after some time looping through the FOR-NEXT below.
It is very hard to reproduce, some times it does happens sometimes it's just fine.
I'd like to know what causes it???
I thought I can through in a call ChnDel(chnNum) to clean up things but it still crashes with or without it.
Please advise!!!
Thanks,
Boyan
PtlShow = False
View.AutoRefresh = false
DataDelAll
Call View.Sheets.RemoveAll()
Set MySheet = View.Sheets.Add("NewSheet")
call ChnDelete("1-" & ChnNoMax)
chnNum = 1
progresNum = 1
'===================================================================================
Dim l1, l2, n
Dim wholeJob, pRatio()
Dim NewGroup
Call LoopInit()
For i = 0 to ubound(ObjTestDates)
l2 = ubound(ObjTestDates(i).Measurements) + 1
Call MsgLineDisp ("Channel " & i & " of " & ubound(ObjTestDates))
wholeJob = 2 * l2
ReDim Preserve pRatio(i)
pRatio(i) = (100 / wholeJob)
NewGroup = "Group " & CStr(i+1) & " - " & ObjTestDates(i).TestDate
Call GROUPCREATE(NewGroup, i+1)
Call GroupDefaultSet(i+1)
For ii = 0 to ubound(ObjTestDates(i).Measurements)
For n= 0 to 1
if n = 0 then
CurrChannel = CStr(ii+1) & " X_Channel " & " - " & ObjTestDates(i).Measurements(ii)
else
CurrChannel = CStr(ii+1) & " Y_Channel " & " - " & ObjTestDates(i).Measurements(ii)
end if
call ChnDel(chnNum)
Call chnalloc(CurrChannel,ObjTestDates(i).ChannelLength(ii)+1,1,DataTypeFloat64,"Numeric",i+1,chnNum)
Call LoopInc(progresNum*pRatio(i))
chnNum = chnNum + 1
progresNum = progresNum + 1
Next
Next
progresNum = 0
Call LoopInc(progresNum*pRatio(i))
progresNum = 1
Next
Call LoopDeInit()
Call msgboxcancelSee more discussion about this behavior here. Thanks.
-
Keyboard shortcuts not working in Illustrator CC for Mac
I'm having a lot of problems using keyboard shortcuts in Illustrator CC for Mac. They'll will work intermittently. No keyboard issues anywhere else. Is this a bug, or something I can remedy on my end?
I am having the exact same problem and it is really infuriating at times... I just switched from CS6 where I encountered no such problems.
It seems that it usually happens when I switch to Finder or another application and back (altough it may only be Finder). The Illustrator window is still active because I can see Illustrator reacting when I press only CMD or ALT. However all keyboard shortcuts just stop working, for instance CMD+S, or V or any other toolbar shortcuts. To fix it I have to do a mouse click on a tool or menu command or something, and the shortcuts are back for a while...
I am also running Illustrator v.17.0.0 and OS X 10.8.4 on a macbook Pro connected to a Thunderbolt Display and bluetooth mouse/keyboard.
I sure hope this is picked up by Adobe soon, it is really messing with my workflow! -
Too much exclusive CPU time counted at swapcontext function
Hi,
I'm using Sun Studio Express March 2009 Build, especially Performance Analyzer, and I have observed some hardly understandable CPU times measured at swapcontext function of libc library.
Here is my machine spec.
Two-way Intel E5320 processors with 16GB memory
SUSE Linux Enterprise Server 10 SP1 (x86_64)
My program consisted of 8 threads (pthread), and around a hundred of user contexts (coroutines or fibers) run on every single thread. I'm using makecontext/swapcontext for creating/scheduling user contexts on threads.
I'm using both Sun Studio Performance Analyzer and Intel VTune Performance Analyzer.
My problem is that performance analyzer reported about 20% of total CPU time as the exclusive CPU time of swapcontext function, while I couldn't find as many HW event samples related to swapcontext by using VTune.
To narrow down the problem scope, I made simple test program, and I reproduced the problem. I attached the test program generator written by bash script at the end of this message.
I generated the test program with following command.
% bash code_gen.sh 8 128 100000 1000
Then, you can get the test program, which consists of 8 threads with 128 user contexts at each threads, and 100000 times of context switch at each user context.
In my system, Sun Studio Performance Analyzer reported 328 seconds of exclusive CPU time at swapcontext out of 463 seconds total CPU time (CPU Time of <Total>). Briefly, swapcontext consumed about 70% of total CPU time.
However, according to VTune sampling, both libc-2.4.so and vmlinux-2.6.16.46-0.12-smp consume only 8% of total clockticks.
It's too large gap between Sun Studio and VTune.
Have you seen this kind of problem? Do you know why this mismatch happens?
Or how can I estimate actual swapcontext cost?
Thank you for reading my post, and I'm looking forward to some hints about my problem.
Colin
---- code_gen.sh ----
#!/bin/bash
usage()
echo "code_gen.sh <num_threads> <num_task> <num_loop> <func_body_size>"
test()
local num_threads=$1
local num_tasks=$2
local func_loop=$3
local func_body_size=$4
local file_name="mytest_${num_threads}_${num_tasks}_${func_loop}_${func_body_size}"
main_func_gen $num_tasks $func_loop $func_body_size > $file_name.c
gcc -O2 $file_name.c -o $file_name -lpthread
sub_func_gen()
local func_id=$1
local func_loop=$2
local func_body_size=$3
local num_tasks=$4
cat <<!
static void f$1(int threadId)
volatile int c = 0;
int i = 0;
for(i = 0; i < $func_loop; ++i)
for i in `seq 1 $func_body_size`; do
echo " c+=1;";
done
cat <<!
swapcontext(&ctx[threadId][$func_id], &ctx[threadId][($func_id+1)%$num_tasks]);
main_func_gen()
num_tasks=$1
func_loop=$2
func_body_size=$3
cat <<!
#include <stdio.h>
#include <ucontext.h>
#include <stdlib.h>
#include <sys/time.h>
#include <time.h>
#include <pthread.h>
static ucontext_t **ctx;
static ucontext_t *mctx;
static pthread_t *pThreads;
for i in `seq 0 $((num_tasks-1))`; do
sub_func_gen $i $func_loop $func_body_size $num_tasks
done
cat <<!
int
threadMain (int* pThreadId)
char** st = NULL;
int i = 0;
int* ret = NULL;
int threadId=*pThreadId;
printf("$num_tasks tasks on %d thread\n", threadId);
st = (char**)malloc(sizeof(char*)*$num_tasks);
ctx[threadId] =(ucontext_t*)malloc(sizeof(ucontext_t)*$num_tasks);
ret = (int*)malloc(sizeof(int)*$num_tasks);
for i in `seq 0 $((num_tasks-1))`; do
cat <<!
st[$i] = (char*)malloc(sizeof(char)*8192);
getcontext(&ctx[threadId][$i]);
ctx[threadId][$i].uc_stack.ss_sp = st[$i];
ctx[threadId][$i].uc_stack.ss_size = 8192;
ctx[threadId][$i].uc_link = &mctx[threadId];
makecontext(&ctx[threadId][$i], f$i, 1, threadId);
done
cat <<!
//printf("start\n");
swapcontext(&mctx[threadId], &ctx[threadId][0]);
return 0;
int
main(int argc, char* argv[])
int num_threads = $num_threads;
int rc;
pthread_attr_t attr;
void *status;
struct timeval begin, end;
int *threadId;
int i;
printf("%d threads\n", num_threads);
pthread_attr_init(&attr);
pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE);
pThreads = (pthread_t*)malloc(sizeof(pthread_t)*num_threads);
mctx = (ucontext_t*)malloc(sizeof(ucontext_t)*num_threads);
ctx = (ucontext_t**)malloc(sizeof(ucontext_t*)*num_threads);
threadId = (int*)malloc(sizeof(int)*num_threads);
// begin time measurement
gettimeofday(&begin, NULL);
for(i=0; i < num_threads; ++i)
threadId[i] = i;
rc = pthread_create(&pThreads, &attr, threadMain, (void*)&threadId[i]);
if(rc)
printf("ERROR; return code from pthread_create is %d\n", rc);
exit(-1);
pthread_attr_destroy(&attr);
for(i = 0; i < num_threads; ++i)
rc = pthread_join(pThreads[i], &status);
if(rc)
printf("ERROR; return code from pthread_join is %d\n", rc);
exit(-1);
// end time measurement
gettimeofday(&end, NULL);
printf("finished. Elapsed time=%dms\n", ((end.tv_sec - begin.tv_sec)*1000000+(end.tv_usec - begin.tv_usec))/1000);
pthread_exit(NULL);
if [[ $# -ne 4 ]]; then
usage
exit 0
fi
test $1 $2 $3 $4Hi Nik,
Oh! I didn't know that. Here I put my code again. I'm sorry for your confusion.
#!/bin/bash
usage()
echo "code_gen.sh <num_threads> <num_task> <num_loop> <func_body_size>"
test()
local num_threads=$1
local num_tasks=$2
local func_loop=$3
local func_body_size=$4
local file_name="mytest_${num_threads}_${num_tasks}_${func_loop}_${func_body_size}"
main_func_gen $num_tasks $func_loop $func_body_size > $file_name.c
gcc -O2 $file_name.c -o $file_name -lpthread
sub_func_gen()
local func_id=$1
local func_loop=$2
local func_body_size=$3
local num_tasks=$4
cat <<!
static void f$1(int threadId)
volatile int c = 0;
int i = 0;
for(i = 0; i < $func_loop; ++i)
for i in `seq 1 $func_body_size`; do
echo " c+=1;";
done
cat <<!
swapcontext(&ctx[threadId][$func_id], &ctx[threadId][($func_id+1)%$num_tasks]);
main_func_gen()
num_tasks=$1
func_loop=$2
func_body_size=$3
cat <<!
#include <stdio.h>
#include <ucontext.h>
#include <stdlib.h>
#include <sys/time.h>
#include <time.h>
#include <pthread.h>
static ucontext_t **ctx;
static ucontext_t *mctx;
static pthread_t *pThreads;
for i in `seq 0 $((num_tasks-1))`; do
sub_func_gen $i $func_loop $func_body_size $num_tasks
done
cat <<!
int
threadMain (int* pThreadId)
char** st = NULL;
int i = 0;
int* ret = NULL;
int threadId=*pThreadId;
printf("$num_tasks tasks on %d thread\n", threadId);
st = (char**)malloc(sizeof(char*)*$num_tasks);
ctx[threadId] =(ucontext_t*)malloc(sizeof(ucontext_t)*$num_tasks);
ret = (int*)malloc(sizeof(int)*$num_tasks);
for i in `seq 0 $((num_tasks-1))`; do
cat <<!
st[$i] = (char*)malloc(sizeof(char)*8192);
getcontext(&ctx[threadId][$i]);
ctx[threadId][$i].uc_stack.ss_sp = st[$i];
ctx[threadId][$i].uc_stack.ss_size = 8192;
ctx[threadId][$i].uc_link = &mctx[threadId];
makecontext(&ctx[threadId][$i], f$i, 1, threadId);
done
cat <<!
//printf("start\n");
swapcontext(&mctx[threadId], &ctx[threadId][0]);
return 0;
int
main(int argc, char* argv[])
int num_threads = $num_threads;
int rc;
pthread_attr_t attr;
void *status;
struct timeval begin, end;
int *threadId;
int i;
printf("%d threads\n", num_threads);
pthread_attr_init(&attr);
pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE);
pThreads = (pthread_t*)malloc(sizeof(pthread_t)*num_threads);
mctx = (ucontext_t*)malloc(sizeof(ucontext_t)*num_threads);
ctx = (ucontext_t**)malloc(sizeof(ucontext_t*)*num_threads);
threadId = (int*)malloc(sizeof(int)*num_threads);
// begin time measurement
gettimeofday(&begin, NULL);
for(i=0; i < num_threads; ++i)
threadId[i] = i;
rc = pthread_create(&pThreads, &attr, threadMain, (void*)&threadId[i]);
if(rc)
printf("ERROR; return code from pthread_create is %d\n", rc);
exit(-1);
pthread_attr_destroy(&attr);
for(i = 0; i < num_threads; ++i)
rc = pthread_join(pThreads[i], &status);
if(rc)
printf("ERROR; return code from pthread_join is %d\n", rc);
exit(-1);
// end time measurement
gettimeofday(&end, NULL);
printf("finished. Elapsed time=%dms\n", ((end.tv_sec - begin.tv_sec)*1000000+(end.tv_usec - begin.tv_usec))/1000);
pthread_exit(NULL);
if [[ $# -ne 4 ]]; then
usage
exit 0
fi
test $1 $2 $3 $4best regards,
Colin -
Java.io.IOException during large file processing on PI 7.1
Hello Colleagues,
for a large file scenario on our PI 7.1 System we have to verify with big file size we are able to process over PI.
During handing over the large file (200 MB XML) form the Adapter Frame Work (File Adapter) to the Integration Engine we receive following error:
Transmitting the message to endpoint http://<host>:<port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server.
The message processing stopped and message still lies at Adapter Frame Work. Large files up to 100 MB we are able to process successfully.
Please, could you tell me why this happened and how we are able to solve it?
Because there is not a java.outofmemory exception however a IO exception i think it could be an memory issue?!
Many thanks in advance!
Regards,
JochenHi Jochen,
Indeed the error is IO Error and it is because the Adapter engine was not able to send the message to Integration server. But it happens due to memory/heap size issues.
Look at these thread, they are having the same problem. Please try the remedy measures suggested by them
Mail to Proxy scenario with attachment. AF channel error.
Error with huge file
problem with big file in file-to-proxy scenario
Is there any additional information in Adapter messaging tool.?
Regards
Suraj
Edited by: S.R.Suraj on Oct 1, 2009 8:55 AM -
my ipad is not giving any sound from ipad but giving sound from headphone when plugged in, what may be the problem i dont know but facing much problems as phone is muted.I have checked all switches.The sound switch is also on.Red is not visible in rightside switch.
Please solve the problem,how it is happened whats solution,i want remedia measures
IPAD 3GS iOS 8.1.2 updated recently but sound muted please solve my problemWhat do you have Settings > General > Use Side Switch Set To ? If 'rotation lock' then you mute/unmute sounds via the Control Centre (swipe up from the bottom edge of the screen), not the switch on the side of the iPad.
If that is not 'on' then try inserting and removing headphones and see if that gets sounds to work, and if not then try a soft reset (i.e. a reboot) and see if that makes any difference : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear -
Communication Channel error (Device busy)
HI all,
i have a problem with sender communication channel (CC) (type file) on PI 7.1
The CC has follow error:
Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.FileNotFoundException: /IFR_PI/prd/out/TYPEB/SEDE_PV/PV_ART/VARGPV_I003 (Device busy).
Anyone can help me to understand this error?
Thanks in advance
PMHi,
The file size is a drawback of file adapter.
Check the note Note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter
See point 14. Memory Requirements
Indeed the error is IO Error and it is because the Adapter engine was not able to send the message to Integration server. But it happens due to memory/heap size issues.
Look at these thread, they are having the same problem. Please try the remedy measures suggested by them
Mail to Proxy scenario with attachment. AF channel error.
Error with huge file
problem with big file in file-to-proxy scenario
regards,
ganesh.
Maybe you are looking for
-
Getting FRM-40400 but data is not in table
I have a form with three data blocks. The first one is Database Data Block = no because it is used for query purposes only. The second one is Database Data Block = yes and is the only data block in which data gets entered into a table. The final data
-
How to get mp3s to show in itunes list without adding file or folder
How do you get downloaded music into the same folder as the itunes library to show up without having to do add folder or file. It seems on the mac they show up but on Windows XP you have to do an individual add of each new folder. The itunes library
-
Delegate permission on Hyper-V 2012 R2
Hi I'm having problem to delegate permission on Hyper-V 2012R2, Error - " you do not have the required permission to complete this task contact the administrator of the authorization policy for the computer 'localhost' " Everything is working great o
-
Firmware update N80 with Vodafone
Well finally last night I got to upgrade my N80 to 4.0623.0.41 of the firmwear. I was so happy........... ..until I started to use my phone, pronlems and lots of em. Themes that I have used before on my N80 and have functioned/looked as they should.
-
The show toolbar is greyed out in safari and can't get it to not hide
How can I get the toolbar on Safari to stay on top? It keeps hiding?