Remediation status in OIA-Urgent

Hi Experts,
I need to find actual remediation status (required,completed),remediation end_date(remediation completion date) for all accounts and entitlements for a perticular certification displaying in remediation tracking tab.
I am retrieving from Id_certs,idc_user_accounts,idc_user_acct_attrs tables, I considered remediation status '0' means completed and '1' means required.
Please help me which table actually reflect the remediation information displaying in remediation tracking tab.
This is very urgent for me please help ASAP.
Thanks,
Rajeshkumar N

Hi,
tanx for ur reply,
can u please specify which .jsp pages i need to change to reflect status in webshop.
Regards
Yaswanth.k

Similar Messages

  • Remediation status is not updated

    Hi,
    I have a SCCM 2012 R2 CU3 installation where I use Endpoint Protection on the clients.
    My problem is that when I run the report "Infected Computers" I see a list of the computers that are/were infected but the report shows the value "None" in the "Remediation status" field for a lot of the computers even though
    that the computers have been cleaned successfully.
    If I look at the computer object in the SCCM console there is also listed None as the Remediation status.
    How come that the status is not correct? How is the remediation status reported/calculated?
    I can see that the report gets it information from the "ComputerStatus" field of the "v_GS_AntimalwareInfectionStatus" view.
    Any help would be appreciated.
    v_GS_AntimalwareInfectionStatus"
    Thomas Forsmark Soerensen

    Hi,
    Could you please upload a screenshot of your issue?
    What's the Infection Status in the "Infected Computers" report?
    You could also try to run the other endpoing protection reports to see if you can get more information.
    Please make sure that you have choosed the correct collection in the console when check Malware Remediation Status.
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Malware Remediation Status Incorrect

    We had malware detected and remediated in the last 24 hours but the "Malware remediated in the last 24 hours" status shows "0" clients. I check this status daily and use it to monitor clients and system health. Going into "Malware
    Detected" and it clearly shows 1 incident with 1 computer infected and 1 computer remediated within the last 24 hours. Why isn't the event being reported in "Malware Remediation status?" I have trusted the status display in the past, but if
    it's not reporting then there is an issue and SCCM's reporting tools cannot be considered reliable.

    Hi,
    SCCM 2012 allows you run reports about SCEP information stored by SCCM, there are following report item you can try:
    Antimalware activity report
    Antimalware overall status and history
    Computer malware details
    Infected Computer
    Top users by threats
    User threat list
    If you get the empty result, please check if you used the correct collection when running above report.
    “Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.”

  • How to increase the width of the second line -status bar -tab --Urgent

    Hi all,
    We are not able to get the full information which suppose to display in second line in the status bar -tab for e.g --> we are getting only Enter Qu... for the message Enter Query.
    We need to display full information. Could anyone help us ?

    ok, I tested it for you.
    IE versus Firefox versus Jini versus sunplugin.
    In each version you have too few space for Enter-Query... You have to live with that problem

  • Doubt in pf status..its urgent

    hi all
         Can anyone help me out in copying the selected and displaying it in next screen.In my PF status COPY button is not working but back is working..here is my code..
    *& Report  ZSUB
    REPORT  ZSUB.
    tables : vbpa,vbrk,vbrp.
    type-pools : slis,icon.
    data : begin of itab_vbrk occurs 0,
           vbeln like vbrk-vbeln,
           netwr like vbrk-netwr,
           waerk like vbrk-waerk,
           vkorg like vbrk-vkorg,
           vtweg like vbrk-vtweg,
           kunag like vbrk-kunag,
           bstnk_vf like vbrk-bstnk_vf,
           fkart like vbrk-fkart,
           erdat like vbrk-erdat,
           ernam like vbrk-ernam,
           end of itab_vbrk.
    data : begin of itab_vbrp occurs 0,
           aubel like vbrp-aubel,
           vgbel like vbrp-vgbel,
           end of itab_vbrp.
    data : begin of itab_vbpa occurs 0,
           kunnr like vbpa-kunnr,
           end of itab_vbpa.
    data : begin of itab_final occurs 0,
           vbeln like vbrk-vbeln,
           netwr like vbrk-netwr,
           waerk like vbrk-waerk,
           vkorg like vbrk-vkorg,
           vtweg like vbrk-vtweg,
           kunag like vbrk-kunag,
           bstnk_vf like vbrk-bstnk_vf,
           fkart like vbrk-fkart,
           erdat like vbrk-erdat,
           ernam like vbrk-ernam,
           aubel like vbrp-aubel,
           vgbel like vbrp-vgbel,
           kunnr like vbpa-kunnr,
           select type checkbox,
           icon(4) type c ,
           tinvamt  LIKE vbrk-netwr,     "Tax Invoice Amount
           tinvlines(4),                 "Total Invoice Lines
            ttaxlines(4),                 "Total Tax Invoice Lines
            alines,                       "Select All Lines
           end of itab_final.
    *CONTROLS TC1 TYPE TABLEVIEW USING SCREEN 1000.
    *CONTROLS TC2 TYPE TABLEVIEW USING SCREEN 1000.
    data : d_fieldcat type slis_t_fieldcat_alv,
           d_fieldcat_wa type slis_fieldcat_alv.
    select vbeln vkorg kunag bstnk_vf fkart netwr waerk erdat ernam from vbrk into corresponding fields of table itab_final.
    if not itab_vbpa[] is initial.
    select kunnr from vbpa into corresponding fields of table itab_final.
    endif.
    d_fieldcat_wa-fieldname = 'VBELN'.
    d_fieldcat_wa-seltext_l = 'INVOICE'.
    d_fieldcat_wa-col_pos = 1.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'VKORG'.
    d_fieldcat_wa-seltext_l = 'SALES ORG'.
    d_fieldcat_wa-col_pos = 2.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'KUNAG'.
    d_fieldcat_wa-seltext_l = 'SOLD-TO'.
    d_fieldcat_wa-col_pos = 3.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'KUNNR'.
    d_fieldcat_wa-seltext_l = 'BILL-TO'.
    d_fieldcat_wa-col_pos = 4.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'BSTNK_VF'.
    d_fieldcat_wa-seltext_l = 'REFERENCE NO.'.
    d_fieldcat_wa-col_pos = 5.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'FKART'.
    d_fieldcat_wa-seltext_l = 'INVOICE TYPE'.
    d_fieldcat_wa-col_pos = 6.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'NETWR'.
    d_fieldcat_wa-seltext_l = 'NET VALUE'.
    d_fieldcat_wa-col_pos = 7.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'WAERK'.
    d_fieldcat_wa-seltext_l = 'CURRENCY'.
    d_fieldcat_wa-col_pos = 8.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'ERDAT'.
    d_fieldcat_wa-seltext_l = 'CREATED ON'.
    d_fieldcat_wa-col_pos = 9.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'ERNAM'.
    d_fieldcat_wa-seltext_l = 'CREATED BY'.
    d_fieldcat_wa-col_pos = 10.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'SELECT'.
    d_fieldcat_wa-seltext_l = 'SELECT'.
    d_fieldcat_wa-edit = 'X'.
    d_fieldcat_wa-checkbox = 'X'.
    d_fieldcat_wa-col_pos = 11.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    data : gd_repid type sy-repid.
    gd_repid = sy-repid.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    *   I_INTERFACE_CHECK                 = ' '
    *   I_BYPASSING_BUFFER                = ' '
    *   I_BUFFER_ACTIVE                   = ' '
       I_CALLBACK_PROGRAM                = gd_repid
       I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
    *   I_CALLBACK_USER_COMMAND           = 'UCOMM'
    *   I_CALLBACK_TOP_OF_PAGE            = ' '
    *   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    *   I_CALLBACK_HTML_END_OF_LIST       = ' '
    *   I_STRUCTURE_NAME                  =
    *   I_BACKGROUND_ID                   = ' '
       I_GRID_TITLE                      = 'CREATE TAX INVOICE NUMBER_SAP INVOICE SELECTION SCREEN'
    *   I_GRID_SETTINGS                   =
    *   IS_LAYOUT                         =
        IT_FIELDCAT                       = d_fieldcat
    *   IT_EXCLUDING                      =
    *   IT_SPECIAL_GROUPS                 =
    *   IT_SORT                           =
    *   IT_FILTER                         =
    *   IS_SEL_HIDE                       =
    *   I_DEFAULT                         = 'X'
    *   I_SAVE                            = ' '
    *   IS_VARIANT                        =
    *  IT_EVENTS                         = gt_event[]
    *   IT_EVENT_EXIT                     =
    *   IS_PRINT                          =
    *   IS_REPREP_ID                      =
    *   I_SCREEN_START_COLUMN             = 0
    *   I_SCREEN_START_LINE               = 0
    *   I_SCREEN_END_COLUMN               = 0
    *   I_SCREEN_END_LINE                 = 0
    *   I_HTML_HEIGHT_TOP                 = 0
    *   I_HTML_HEIGHT_END                 = 0
    *   IT_ALV_GRAPHICS                   =
    *   IT_HYPERLINK                      =
    *   IT_ADD_FIELDCAT                   =
    *   IT_EXCEPT_QINFO                   =
    *   IR_SALV_FULLSCREEN_ADAPTER        =
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER           =
    *   ES_EXIT_CAUSED_BY_USER            =
      TABLES
        T_OUTTAB                          = itab_final
    * EXCEPTIONS
    *   PROGRAM_ERROR                     = 1
    *   OTHERS                            = 2
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    form SET_PF_STATUS using rt_extab type slis_t_extab.
    set pf-status 'NEW'.
    endform.
    <REMOVED BY MODERATOR>
    ASHA....
    Edited by: Alvaro Tejada Galindo on Jan 9, 2008 8:22 AM

    Hi,
    refer these ,u will get some help
    Standard Buttons:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/webDynproABAP-ALVControllingStandard+Buttons&
    alv-pfstatus:
    http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_pfstatus.htm
    then how to capture that button click.
    http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_ucomm.htm
    http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_rowsel.htm

  • Non-Persistent VDI's stuck in Remediation Status pending in SCEP

    Currently have 2 VDI's stuck in a remediation state - pending. The action required states Endpoint Protection Pending Reboot.
    Since these are non-persistent devices the virus has been removed after a restart as they are back to a clean image however SCCM/SCEP does not seem to recognise the restart state. 
    How can I clear this so that the clients report back as re mediated? Note I have run a full scan and restarted the devices.
    Cheers
    Paul | sccmentor.wordpress.com

    Hi,
    Please examine ExternalEventAgent.log on the client to see whether the state messages have been forwarded successfully.
    And check EPCtrlMgr.log on the site system server that records details about the synchronization of malware threat information from the Endpoint Protection role server into the Configuration Manager database.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Remedy resource adapter very urgent

    Hi all,
    we recently did the idm upgrade 7.1 to 8.1.1.2. all the resource adapters are working fine. but, remedy resource adapter test connection is successful, the account is not creating. in the trace files. i am seeing this error. please some help me as soon as possible. that will be great for me. thanks in adavace.
    JAVA.LANG.NULLPOINTEREXCEPTION AT COM.WAVESET.ADAPTER.AGENTRESOURCEADAPTER.GETRESINFO(AGENTRESOURCEADAPTER.JAVA:1621) AT COM.WAVESET.ADAPTER.AGENTRESOURCEADAPTER.DOCREATEORUPDATEREQUEST(AGENTRESOURCEADAPTER.JAVA:1347) AT COM.WAVESET.ADAPTER.AGENTRES...
    Thanks,

    Hey,
    Answer is NO. If your not using proxies then you can't use XI adapter go for RFC adapter.
    Itz not a big deal jzu go through these
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
    File to RFC
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    <b>Cheers,
    *RAJ*
    *REWARD POINTS IF FOUND USEFULL*</b>

  • BPS -STS 'Status and Tracking' (URGENT)

    Quick question for Mark B,
    I have a customer demo on Monday and would appreciate any feedback on this.
    In STS, when a superior 'Approves' an employees work they have to select the 'Open Planning' button to first view the data, before they actually press the 'Approve' button.  However, when they view the data, they also have ability to change the data entered by the employee.
    How would it be possible in the above scenario to only allow the Manager to just display data without ability to change the data entered by the employee.
    Regards,  Marinos

    Marinos,
    if the manager must not change any data, just assign queries to him in STS and no layouts.
    Regards
    Marc
    SAP NetWeaver RIG
    PS: Please do not address issues directly to me (or anyone else for that matter). There are other people here that are also very knowledgable. Although I'm monitoring the forum regularly, there is no guarantee that I will do so, read and answer everything. Thanks.

  • Delivery Status Widget unavailable urgently needed!

    Dear all,
    Can anyone send me this unavailable widget:
    http://www.apple.com/downloads/dashboard/shopping/deliverystatus.html
    Thanks in advance for the help!!!
    Pedro

    The author finally updated the widget website with the new version

  • Cannot set status of Urgent Change after manual transport

    Hi all,
    We are usng CHARM in Solution Manager 7.1 for import to the SAP ECC (EHP6) systems.
    I cannot set the status of the Urgent Change document (ZMHF) to status "To be Tested" after the transports were manually released and manually imported to the ECC QA system.
    When I use action "Pass Urgent Change to Test", the system stopped with error "Not all task are yet released" and will not change the status .
    Based, on the Task List log, the system started the release process although no transports were released.
    Is there any way that I can update the status of the Urgent Change document to "To be Tested"?
    I tried program CRM_SOCM_SERVICE_REPORT but still did not change the status.
    Any suggestion?
    Thanks,
    Tess

    Hi Venu,
    have a look under System Administration - System Configuration -- Knowledge Management -- Configuration --Content Management -- User Interface -- Commands -- UI Command Groups -- StatemanagementGroup.
    See Java class: com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementGroupCommand. Take the class and decompile this and everything needed around to understand how this class works.
    Then you can choose to extend this CommandGroup to also have a command "Resubmit for Approval" or you can implement your own UI Command only for resubmitting (you will also have to activate your command (group) by settings within the configuration).
    On the other hand, if all this is completely new to you, I'm a bit sceptical if the task isn't a bit too big as a first task on KM implementation topics...?
    Hope it helps
    Detlev

  • Urgent Correction Completion status

    Dear all,
    We are using Charm,and when i complete a urgent correction the status of the urgent correction is changed to "withdrawn" instead of "completed".Did any one faced this problem?Please help ASAP.
    Thanks and regards,
    Avinash.

    pls follow:
    spro-mm-purchasing--purchase requisition-define document type---here u see the field selection assigned with the document type.
    no w again follow spro-mm-purchasing--purchase requisition-define screen layout at document level-select the field selection u have seen assigned with the document type-choose details-here in the next screen u select thefield selection group and choose (F2)-in the next screen u can select the field table as per ur requirement.
    regards,
    indranil

  • Remediation tracking logic!

    Hi all,
    In OIA ,I am using role as a certifiable attribute.
    When i revoke an account it goes to remediation tracking and after the accounts maintenance job is done it is set to 100%.
    But when i certify an account with several roles and revoke one or two roles and certify the rest under that account the remediation status is always in "required" state for the revoked roles.It is never set to complete state and remediation tracking of that particular certification never reaches 100%.
    Can anyone explain the logic behind this??
    Thanks in advance!
    Shylupriya Arjunan.

    Hi,
    I am working in a fertilizer co. (FFC) our planned turnaround is of 15-18 days depends on nature of job. So the duration of turnaround is very little, and management required to make a tight grip on major milestones like urea production, ammonia production, co2 availability and furnace firing.  In this cenerio my (planner) duty is to check these milestones at the end of 12 hrs. shift.  and track the operations who are eating their float and can drive these major milestones after 2 or 3 days.
    I am performing this job in Primavera by opening the Predecessor window and then check all predecessories links and unlink the less critical jobs, scheduled them and then check less critical jobs and so on, till I reached the final job who is the major driver of our milestones.
    In SAP PS, can I do this type of exercise.
    BR
    Tanweer

  • SCEP Remediation question

    So we had a Warning in SCCM show up today that some machines had some sort of malware on it.  When I viewed the info there was an item called SoftwareBundler:Win32/SquareNet that showed as Computers Infected 6, Computers Remediated 6.  The circle
    at the bottom was also green.
    To me, if something has been remediated, I would assume that means it had been fix up and is now good to go.  However, when I double clicked on the item to view the 6 machines, under the column called Endpoint Protection Remediation Status, 1 of them
    says Cleaned and the other 5 say None.
    Does that mean those other 5 are still infected?  If so, why does it say that all 6 have been remediated on the main screen.
    On the 5 that show None, should I kick off a definition update and then a full scan in order to get rid of whatever it is?  We're just getting started with getting all this setup and configured so I want to make sure I'm reading this all correctly and
    taking the proper actions.
    Thanks!!

    > I would assume that means it had been fix up and is now good to go. 
    That's correct - it means the detected item is no longer there.
    > However, when I double clicked on the item to view the 6 machines, 1
    of them says Cleaned and the other 5 say None.
    As long as that column doesn't show that that device still needs remediation, they should be good.
    > On the 5 that show None, should I kick off a definition update and then a full scan in order
    to get rid of whatever it is?  
    I think it is always a good idea to follow up a detection/remediation with a full scan to ensure there
    isn't anything else on there that wasn't triggering real-time protection. Furthermore, you consider spending time investigating how it got there in the first place.  Are the devices patched?  Do people who shouldn't have admin rights have admin rights?
    etc.
    I hope that helps,
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you found a bug or want the product to work differently,
    share your feedback.
    <-- If this post was helpful, please click the up arrow or propose as answer.

  • Sdhfhead: status displayed wrong (e-status resp. asterisks)

    Hi Experts,
    my issue isn't easy to describe.. let's get it on:
    when changing a status within an urgent correction (SDHF), ta CRMD_ORDER, the log window on the right lower side shows something like "status was set to value "'in development'" (in german: "Der Status wurde auf den Wert 'In Entwicklung' gesetzt").
    I don't know why, but under some circumstances (other SolMan System, other profile), it says "status was set to value E0012" (in german: "Der Status wurde auf den Wert E0012 gesetzt"), what is correct, though, but I do not want the e-status but its description displayed, as above.
    Even more suspicious: sometimes (and, once more, I don't know why) it says "status was set to value '****************************" (in german: Der Status wurde auf den Wert '**************************** gesetzt") which is totally not wanted. It shows 28 asterisks with a single inverted comma in the beginning.
    I think it has something to do with self-made actions and status but i haven't found the customizing for it. Can anybody help??
    Greetz,
    Dirk

    Check the customizing settings in SPRO at:  "Define Status Attributes"
    For every status used within your transaction type you need to have an entry in table TSOCM_STAT_PROP.
    That table is maintained via customizing section "Define Status Attributes" (all status) or via "Make Settings for Change Transaction Types" (select transaction type --> "specify status attributes").
    After those entries are made the correct description will be shown in the log file.
    /cheers
    Edit: beside what I mentioned above this is also the section where you determine to which system the action "logon to system" will take you. In case action "logon to system" is available when status E0002 is reached and you have assigned "Quality System" to status E0002 then performing this action would take you to your Quality System.
    Edited by: Christian Kaunzner on May 16, 2008 1:40 PM

  • OIA Remedition

    Hi,
    Am currently working on OIA Remedition process. The application work fine. It revokes the user from Target System (say LDAP).
    But the status of my remdition tracker shows a "Required" Instead of complete.
    When i debugged on both the Side (OIA & SIM). I found an error, that occured during De-provisioning
    *"com.waveset.util.WavesetException: Can't call method put on class com.waveset.object.GenericObject java.lang.IllegalArgumentException"*
    As per my understanding, in SIM, the user gets unlinked and deleted from LDAP and SIM is trying to put a data in map to ack OIA.
    Once the map is recevied at the OIA side, the status should change. But since Am getting the above error. The Status in OIA is not getting changed.
    Any idea.

    Make sure you have the latest version of OIA as there were some initial bugs in the 11gR1 release. (I believe you should have at least BP4 installed) This may resolve your issue
    Regards,
    Daniel

Maybe you are looking for