Remember my Skype ID but not the pass or Email. Ne...
I've used the setting "Log me in automatically when skype boots" for the longest amount of time, and as a result I cant recall the pass I've been using nor the email I'd orignally used for the Skype acount.
My account name was [removed for privacy] lt (display name was different, but my user was that) and I've searched the recovery options but cannot find anything under "I've forgotten my account's original Email" if I can get assistance, I would highly appreciate it (in additon the email I'd used to use may no longer be in service)
Hi, Spartan87, and welcome to the Community,
If a moderator/operator could PM me I will provide both the Account name and Email.
We can not do this, as our Community Guidelines do remind us that this Community is not a branch of Skype Customer Service. They, however, can update an account's e-mail address. This is one of those instances where using a different Skype account to recover your first account may be advisable, so you can be connected with a customer service agent via instant message chat. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
If you experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and choosing a different path through the various drop-down menu options presented.
Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also block reaching an agent.
Last and not least, when you reach the last step of the process, remember to click on the "Start Chat" link when you are provided the choice of visiting the Community or starting an instant message chat with a customer service agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!
Similar Messages
-
3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...
Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok. -
My Skype number is not the number presented when m...
My Skype number is not the number presented when making outbound calls. My subscription had expired but I renewed a day later. My account shows that my Skype number is still active. What do i need to do?
Hi, Atiya85, and welcome to the Community, Please first check if the instruction in this FAQ article does not resolve this problem:https://support.skype.com/en/faq/FA10615/why-am-i-not-receiving-calls-to-my-skype-number Otherwise, please contact Skype Customer Service for further assistance in diagnosing and rectifying the issue. We here in the Community do not have the tools to do this. Regards,Elaine
-
Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.
c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem. -
I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.
I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!
-
My iPhone calender sync to my iPhad but not the oposite
My iPhone calender sync to my iPhad but not the oposite
Use this to backup your contacts,
https://itunes.apple.com/gr/app/my-contacts-backup/id446784593?mt=8
Then you will be safe to sync with Outlook. Remember that: Don't sync your iPhone contacts with an empty Outlook address book. If your Outlook address book is empty create a fake contact before you sync. -
Click on app link goes to App Store but not the app
Since I updated to iOS 6, clicking on a direct link to an app gets me to the store but not the particular app.
Then I have to remember the exact name and search for it. In previous iOS I could get to the app directly.
This is most annoying. How do I change this behavior?Well, it still is not working as I expected.
Sometimes, if I click on the link, it will go to the app store and produce a blank white screen.
If I go back to the link, in an email or web page, and try again, then the desired app will pop up when it goes to the app store. Sometimes the app store will just quit. Then if I go back to the store it will show the desired app. -
How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.https://www.google.com/calendar/iphoneselect
-
Why would the audio play through the headphones but not the speakers?
I am working on an app that has embedded video. The audio works fine through my speakers and headphones as it does for some of my coworkers, but I also have other coworkers who get audio through the headphones but not the speakers. It's a variety of devices, 4, 4S, and 5. Any thoughts?
If you are working on developing an app perhaps you should try the developers forum.
-
QUESTION.
Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
I am using a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading Iphoto ?
I hope that someone is able to help in this matter , as i have to restore 12000 photos !
Thanking you in anticipation.
Alan from WigtonHallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan -
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
I bought a new Macbook pro in 02/26/2013 from Apple Canadian Ices -003. Than I could not use it, because my cursor uncontrollably was jumping around the screen, I was resumed my trackpad become bulging, Than on11/25/ 2013 they changed my trackpad for free, because was manufactoring defect, but not the bulging battery. They said that is do not needed. Since that my cursor is quiet often quivering, I think my Macbook has serious manufacturing defect. But they said no, during a year period I went to the genius bar at least 15 times, with this and similar problems. I went there yesterday, with different problems, and they said one of the screws came off from my truck pad, therefore they need to fix it and change it. I said: - What, how, what is the real problem? A screw does not comes off just like that? They will change my trackpad again, but not the battery. They said has to rebuild the operation system, I'm saving all of my data right now! I would like to exchange the battery too, or maybe get a new Macbook. My Macbook is 2010 China model. How long I would have this trackpad problem? What are you suggesting?
If it's a 2010 as you say towards the end of your post, it's out of warranty. The battery isn't covered in that case. Why don't you just buy a new battery if that's your concern? If it's a 2013 as you say up at the top, it shouldn't have a bulging battery. How do you know it does? If it really does, ask for the store manager and explain the problem.
-
Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?
Was your Bootcamp info.plist manipulated to change any options?
-
Hi all
I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
Stay Hungry, Stay Foolish
Solved!
Go to Solution.Steve Chandler wrote:
I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
Kudos for being sneaky.
I like these creative work-arounds!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
CR2 files open from one camera, but not the other in CS2
Running Mac with CS2. My camera raw files shot with my lovely Canon 5D open and can be viewed in bridge and in photoshop, but NOT the camera raw from my brand new Canon powershot G9. They are both producing CR2 files. I can see the images in the bridge browser window, but when I double click to open I get a dialogue box that says, "Could not complete your request because Photoshop does not recognize this type of file." I have the 3.7 plug in installed. Please, some god or goddess of photoshop out there, show me the error of my ways!
Walt,
I will answer your questions to the best of my ability. But hopefully others who are better at this than I am will offer their help as well. So, here goes.
1. Everyone has their preferred method of using Bridge. In the Photoshop preferences I have not checked the box to have bridge start automatically. Although I use Bridge most of the time, there are occasions when I don't want to use it. So I prefer to start my Photoshop session by starting Bridge first, and then double-click on an image in Bridge to have it opened in Photoshop. In the Bridge preferences, I have checked the "Double-Click Edits Camera Raw Settings in Bridge", and I like working that way.
2. I have seen several people comment about having this problem. And occasionally it will develop after you have been using Bridge/Photoshop for a while. The only thing I can suggest is for you to hold down the Ctrl key while you start Bridge. A dialogue will appear that will allow you to reset your preferences. There are three options and you should choose all three. I know, you haven't had it installed very long, but this "could" be the problem. One guy I talked with said that he had to do it several times before it fixed the problem.
3. You indicated that you downloaded Camera Raw 4(5). What does that mean? Did you download version 4.5, which is the latest version? And, did you follow the installation instructions that were on the download page? The new plug-in must be put in the exact directory specified, replacing the old version that is already there. The old version cannot be put in a sub folder. You might as well get rid of it. You don't need it anymore. And, again, it has to go into the specific folder designated in the instructions. After you have done that, in Photoshop goto Help/About Plug-ins and click on Camera Raw. It should only be listed once, and when you click on it you should get a dialogue that will tell you what version you have installed.
4. After I installed CS3, when I inserted a card into my card reader I was presented with the normal Windows options. One of the options I was given was to download using Bridge. I chose that option and indicated to always use that option. I haven't had any problems with it since. But if that option isn't there, you can open Bridge and click on the File menu. There is an option to download images from your camera. It has worked well for me.
Maybe you are looking for
-
When I use Google Hangout or GoToMeeting, other participants in the meeting hear an echo of their sound -- loud and obtrusive. When I mute, it goes away. This only happens when I am using my Apple Cinema Display 27" (recent vintage) connected via the
-
Hi everyone! Recently I did some major modifications to my computer but I noticed that 3d games don't work anymore! Guild Wars doesn't work... Need For Speed gone... The games run for a couple of seconds then freeze. Even under some load the computer
-
Transaction log backup through SQL Server Management studio
Dear All, I need to configure transaction log backup through SQL server management studio. It is already being configured for our PRO server(not by me) and now I want to configure it for DEV server. In PRO I am taking it through(SID/right click/task/
-
Update custom table from qa_Results table
Dear Experts, The question is related with Oracle quality collection plan. Here is the question. After entering the result in collection plan we all know that result is store in qa_Results_V view and also in respective view for the collection plan. I
-
I have a nano 6th gen. Can I transfer content from my pc to the nano. I downloaded a language course from a cd to the pc.