Remembering the column selection on the iPod song pane...

Is there a way I can force iTunes to remember the particular columns I select on my iPod's song pane? It seems that every time I connect the iPod (nano 4gb) it resets the song pane colums to some default setting.
This problem does not seem to happen on the computer song pane...
Thanks for any help...
IBM X60 Windows XP Pro

It's been like this for some time and the latest iTunes version hasn't changed anything.
I don't know if it's a bug or Apple meant it to work this way. From memory, earlier versions of iTunes used to remember the settings. For instance I didn't have to keep opening the browser every time the iPod was connected.
Maybe send them some feedback?
iTunes Feedback.

Similar Messages

Why can't I use the Column Browser for my iPod when connected to the computer?

In iTunes 11, I can use the Column Browser while viewing my music library on the computer. But it's inexplicably not available for viewing the music on my iPod when it's connected to the computer to sync.
The Column Browser is the simplest, easiest, most elegant way for me to review what's on my iPod, and create Playlists from my music and CD books. It was available in 10.7 and is available on the computer, why not the iPod????!!!???
Why mess around changing something that isn't broken - after all these years why can't that option still be available? It doesn't have to be the default, just be available. Will I have to downgrade to 10.7 yet again????
And you don't even have a relevant category for me to choose from below!! It makes sense to me that you provide a general "Using iTunes" category.

Thanks for your reply, but I've already done that and the Column Browser options are completely grayed out. I've taken a screen shot and hope I can paste it in here. You'll see I have the sidebar open. That's the way I prefer to deal with iTunes.
This happened after I updated to iTunes 11.0.4. Perhaps that changed the setting options. I think I had the Column Browser option prior to that, but I just got a new iPod and I was busy loading stuff, so not completely sure if it worked before the update. But I think I would have noticed, because it bugs me so much not to have the option.

HT1351 We had 2 computers: his itunes library on one, and mine on the other. We got rid of both of those and got a new computer. I put music on the new computer. My ipod songs are not on itunes. Will I erase them if I sync? How do I add new music?

We had 2 computers: his itunes library on one, and mine on the other. We got rid of both of those and got a new computer. I put new music on the new computer. My ipod songs are not on itunes on the new computer. Will I erase them if I sync? How do I add new music?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How to get the column index of the selected column

Hi All,
I have a dynamically populated advanceddatagrid. Iam trying to edit any column of a particular row. In my as file im able to get the row index using selecteditem property. But I need to get the column Index and the updated value of the column to be passed from the as file to the java method.
So that I can update the DB with the updated value. Can somebody help with a sample code.

...then index 0 becomes index 1 and my program doesn't work properlyThe program works properly, just not as you expect it to.
As you've noticed the table gives you the flexibility to move columns around. So if you move column 0 to column 1, why would you expect to still use 0 as the index? The table manages the reordering of columns for you to make sure the data being displayed in each table column comes from the correct column in the data model.
You can manage this yourself using one of the following methods (I forget which one):
table.convertColumnIndexToModel(int viewColumnIndex)
table.convertColumnIndexToView(int modelColumnIndex)
Or, you can get data from the data model directly:
table.getModel().getValueAt(row, 0);

In my music i have lost the column right with the alphabetic order ... how can i get back ?

in my music i have lost the column right with the alphabetic order .. how can i get back ?

Hello Camcam369,
It sounds like you are not seeing the alphabet listed on the right when perusing songs, artists, or albums in the Music app. I recommend a couple of steps you can take to get it back.
The first thing I recommend is quitting and relaunching the applications on your iPod touch:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the Music app, I recommend restarting your iPod and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPod touch:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

Return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST

Hi,
How to return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST?
For example : if the row has 3 columns then after selecting the particular row, the RETURN_TAB internal table should contain all the three column values.
Regards,
Raghu

Hi,
   Try the following...
DATA : it_fields like help_value occurs 1 with header line.
data: begin of w_vbap,
        vbeln      like vbap-vbeln,
        posnr      like vbap-posnr,
        werks      like vbap-werks,
      end of w_vbap.
data: i_vbap   like w_vbap   occurs 0 with header line,
         w_fields type help_value,
      i_dfies type table of dfies,
      i_return_tab type table of ddshretval with header line,
      i_field type dfies.
select vbeln posnr werks
      from vbap into table i_vbap up to 5 rows.
if sy-subrc = 0.
   sort i_vbap by vbeln.
endif.
clear it_fields[] , it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'VBELN'.
it_fields-selectflag = c_on.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'POSNR'.
it_fields-selectflag = space.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'WERKS'.
it_fields-selectflag = space.
append it_fields.
loop at it_fields into w_fields.
    i_field-tabname   = w_fields-tabname.
    i_field-fieldname = w_fields-fieldname.
    i_field-keyflag   = w_fields-selectflag.
    append i_field to i_dfies.
endloop.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield               = 'VBELN'
     window_title           = 'Select'
    tables
      value_tab              = i_vbap
      field_tab                = i_dfies
      return_tab             = i_return_tab
   exceptions
     parameter_error        = 1
     no_values_found        = 2
     others                 = 3
read table i_return_tab into w_return_tab index 1.
if sy-subrc = 0.
endif.
Regards,
Srini.

How to get the column names of the table into the Dashboard prompt

how to get the column names of the table into the Dashboard prompt
Thanks & Regards
Kishore P

Hey john,
My requirement is as follows
I have created a Rank for Total sales by Region wise i.e RANK(SUM(Dollars By Region)) in a pivot table.
My pivot table looks like this
COLUMN SELECTOR: TOTAL US , REGION , DISTRICT , MARKET
---------------------------------------------------- JAN 2009          FEB 2009        MAR 2009
RANK              REGION                  DOLLARS           DOLLARS        DOLLARS DOLLARS
1 CENTRAL 10 20 30 40
2 SOUTHERN 10 30 30 70
3 EASTERN 20 20 20 60
4 WESTERN 10 20 30 40
When i select the District in column selector
Report has to display rank based on Total Sales by District. i.e
------------------------------------------------- JAN 2009         FEB 2009       MAR 2009
RANK             DISTRICT              DOLLARS           DOLLARS        DOLLARS DOLLARS
for this i need to change the fx of rank i.e RANK(SUM(Dollars By Region)) to RANK(SUM(Dollars By District)) and fx of Region i.e Markets.Region to Markets.District dynamically.
so , i need to capture column name of the value selected from the column selector and dynamically i need to update the fx 0f RANK & fx of region.
do you have any solution for this?
http://rapidshare.com/files/402337112/Presentation1.jpg.html
Thanks & Regards
Edited by: Kishore P on Jun 24, 2010 7:24 PM
Edited by: Kishore P on Jun 24, 2010 7:28 PM

How to change the column heading as the column changes

dear memebrs,
Take an example fo the table EMP. I need to create a report whose parameters are the table column names. so depending on the parameter(which is the column name) the report o/p changes.
so i am dynamically selecting the table column names and getting the o/p. The problem is when the column changes the heading of it in the report o/p is not changing.
we have to use format trigger for this, but i am not sure what code should we write in the format trigger of the boiler plate text of the column heading , such that it changes in accordance with the input which is nothing but column name.
for ex: If i choose EMPNO as the parameter then my column heading should become Employee Number and so on.......
your comments are welcomed
regards
sandeep

you can use a formula column of datatype character and of any width needed instead of a boilerplate text for the heading name.
In the formula column you can write code like below
IF :P_COLUMN_NAME = EMPNO THEN
return('Employee Number');
ELSIF :P_COLUMN_NAME = SAL THEN
return('Salary');
END IF;
where P_COLUMN_NAME the name of the column selected dynamically(i.e. the parameter).

How to call the column names into the prompt and display values dynamically

Hi,
i have a typical requirement where I have to call 3 columns into the AGE Prompt (I know we can use the Column Selector to call the columns) .Below is the Screen Shot.
!http://i46.tinypic.com/2qjfukh.jpg!
2nd Requirement)
The three columns I have are order Date, Ship Date and Entry Date.
Whenever I click on Orderdate from the Prompt, It should dynamically show its values in the report.
and When I click on the Ship Date from the Prompt, it should display the corresponding values in the report.
and so on with the Entry Date.
Can anybody help me how to acheive this.
Thanks a ton.

Ok so then you can use a fake column prompt. Here's one quick approach (nicer and cleaner with LOV tables but I don't if you have any of those).
- Create a fresh prompt using any column you want.
- Open the column formula using the fx button and replace the formula with 'abc'.
- Use "SqL Results" as the "Show" option.
- SQL:
select case when 1=0 the Markets.Region else 'Order Date' from Paint.Markets UNION ALL
select case when 1=0 the Markets.Region else 'Ship Date' from Paint.Markets UNION ALL
select case when 1=0 the Markets.Region else 'Entry Date' from Paint.Markets
- Set Variable = Presentation Variable = @{vPresVarSelectedDate}{Order Date}
- Label = Date
Then in the request, you change the column formula for the date. I'm going to make it short and just assume you called your time dimension alias(es) like the lowest grain:
"@{vPresVarSelectedDate}{Order Date}"."@{vPresVarSelectedDate}{Order Date}"
Cheers,
C.

When I upload a cvs file not all the column display in the Data / Table Mapping screen

1. I have created application using Apex Data Loading wizard. There when I am trying to load data from .csv file, but not all the columns display in the "Data / Table Mapping" screen. But if I go through AQL --> Utility --> Data Workshop, there all column display in "Data / Table Mapping" page. I want to get same thing in application I created. How will get all columns display in the screen?
2. Is there any way to select target table dynamically during runtime. So that in appication we can select different target tables with different source file to load data.

Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
(I don't have an iPad, so I don't know the iOS answer.)

Is there anyway i can put the column browser on the side instead of the top?

Is there anyway i can put the column browser on the side instead of the top?

No, I don't mean adding a column (I did that right away). I'm referring to the 'Songs, Albums, Artists ,Genres, Videos and Radio' at the top. The fact that 'Songs' means something completely different in Classical Music (all instrumental are called 'Pieces' and 'Songs' are limited to works with voice) is something I've had to resign to over the years; this further bias against that kind of music makes iTunes an even poorer fit. Too bad there's no music player optimized for Classical Music...

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

Change the column width on the fly

Dear all,
I have a problem, i have a matrix report, the row is "the project name" and the column is "the items" using within each project, and the problem is the items are variable from time to time the report run for each project, so its exceeds the paper width.
And the question is, is there any way to change the width of the column on the fly, i mean dynamiclly change the column width each time the report is called to make all items fit the paper width.
Thank u

i don't think that we can change the layout of the column in reports
The simple solution for that problem is that u have to
fix the horizontal and vertical layout of the text item
better is to post this problem at reports forum
Najeeb

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

When using pop up editor windows on a Joomla 1.0.15 website the URLs selected in the pop-up are not passed back to the main window

The Joomla content management system version 1.0.15 provides a content editor which uses pop-up windows to select images and files. When using any of these pop up editor windows since 3.6.9 the URLs selected in the pop-up are not passed back to the main editor window.
Up until FF 3.6.8 there were no problems, but FF 3.6.9 and 3.6.10 both exhibit this same problem, as does FF 4 Beta 6. (Support Question raised on this forum in early September when 2.6.9 was released but no response)

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Remembering the column selection on the iPod song pane...

Similar Messages

Maybe you are looking for