Reminder app not working correctly, issue started around Sept. 1,2014. Will not allow me to set date and time for a reminder.

Today I noticed an issue with my Reminder app on my IPhone 5s. Using OS 7.1.2. I called Apple, and the tech didn't know what he was doing and just trying different things.The reminder app will not let me set a date and time for reminder. Finally he escalated the call to a senior advisor who was rude, arrogant and unprofessional. He insisted the Reminder App was updated with the new update of IOS September/October 2013. Not true, the issue just started about 5 days ago August 31,2014. Now there is an additional reminder line for reminder entries that I have to use and have to transfer all my reminders manually from the other part of the app. The feature does exist; if I try to set a date and time for the reminder it appears for 1-2 seconds and then disappears.
Has anyone else noticed this issue?

He insisted the Reminder App was updated with the new update of IOS September/October 2013. Not true
Yes, it is true.
iOS 7 was released 18 Sep 2013. At this time, the Reminders app was updated (with most everything else).
the issue just started about 5 days ago August 31,2014.
Your issue just started but the app was not updated 5 days ago.
Now there is an additional reminder line for reminder entries that I have to use
I don’t understand what this means...
Open Reminders, type the reminder, tap the i at the end, turn on Remind me on a day and enter the date/time.

Similar Messages

  • "RT Set date and time" does not set seconds in UTC mode

    Hallo,
    I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value.
    Even the vi shows this behaviour: I set up a vi in which the time is set in a loop (100ms delay) and read again. When I set local time the clock stops (as expected) but when I set the UTC time the seconds keep on running...
    Can anybody help me with that problem???
    Thanks
    Florian
    Solved!
    Go to Solution.

    Hi Andreas,
    well it does not matter if I set a time zone in the MAX or not. In my example I was working on UTC + 0 but even when I set it to my local time (UTC + 1) I get the same behaviour modified by one hour.
    My LabView Version is 8.5. In in the MAX under Software-> LabView-RealTime it says that I am using 8.5.0.
    I suspect  that the settime.out which is installed on the cRio is probably the root of the problem as VxWorks itself does not offer a function (at least I did not find one) to convert from broken down system time to system time in seconds. There only exist one to convert from broken down local time to system time in seconds ( mktime() ). The reverse function is available for both cases: gmtime() and localtime(). I also did not find a way to find out the offset of the local time. So I have to use the library function settimeUTC() from settime.out.
    As I offered I can send you the settime.out file from my cRio for reference or maybe you can tell me how to find out what the version of the file is. It seems not to be an ELF file as I looked inside it to find some timestamp or version info...
    Thanks so far 
    Florian

  • Not allowed to change date and time for some photos; why?

    I have some images that I scanned in of old photos.  I'm trying to change the date and time and location to reflect the time the original photo was taken.  I know how to do it in the menu system, but when I try to change the original data it tells me they are of a file type that won't allow this metadata to be changed.  They are simple JPEG's so I'm not sure what the problem is.  Do I need to convert it to some other format first to be able to do this?  Any ideas would be helpful...

    Hello Toran,
    are trying to change the date and time of the versions only, or are you trying to change the date and time of the masters too? If you are using
         Meta Data -> change date and time
    deselect "also change master file", this causes the problem, the new Aperture version seems not to allow to change the date and time of masters.
    There have been long discussions on this problem, see e.g. this thread; I do not know if somebody has found a solution by now,
    Regards, Léonie

  • Can not set date and time

    i can't not set date and time i live in florida and i am visiting hawaii.Brought my apple tv and airport express , created my own network to watch my apple tv but unable to set date and time on my apple tv.Pleas help.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Can not set date and time on a new Apple TV

    can not set date and time in a new appletv

    Hello lfsalas55,
    You may need to verify that TCP port 123 on your router is open and available for use by your Apple TV.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • HT1551 When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

    When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

    Were any of the troubleshooting steps in the article from which the question was posted tried?

  • The setting date and time is not working

    Bought an apple TV, installed it as per instruction, connected to my internet but the seting date  and time is not occuring and the activation cannot occur either.  Spent 1 hr on the phone with Apple support staff - they told me it may be a router blockage and to contact my internet provider.  contacted internet provider , they tell me everything is working from their end so must be the apple TV device.  I was told this was easy techonology and that I would not have issues - I have spent 3 hrs on this and truly frustrated as its not working .  any suggestions would help!

    That would be a network issue as you were initially advised. When the date and time can not be set it means it is having trouble connecting to the network.
    Make sure router is up to date, reboot router and ATV. Make sure location is set correctly via ATV and also DNS (settings - general - network - configure DNS - automatic)
    Make sure your router allows access over port 123.
    Failing that try a restore on the unit

  • MyRio Cannot Communicat​e When the Getting Started Wizard Tries to Set Date and Time

    I cannot seem to get MyRio to communicate with my computer. I have installed all the items on both discs and applied any updates that it asked me to do. I plug in the MyRio, the device window pops up and I click the Getting Started Wizard. The myRio is found by the computer and I click on it. It says checking software, then asks me to rename it. I do so and then it attempts to set the date and time. At this point it says it cannot communicate with the myRio and to check that the power supply and USB are plugged in, which are obviously connected since the computer was able to find the myRio in the first place.
    NI MAX can see the myRio, says that it is in "Safe Mode (Software not installed)."
    There may be a problem with conflicting LabViews, since I had 2012 originally before installing the 2014 packages. Does anyone know if the myRio discs are installing the full LabView 2014, or just packages for LabView 2014 that will not work without first installing the full LabView 2014? Or is there a quick fix for this?
    Any help is appreciated.

    There is a separate message board Academic Hardware Products (ELVIS, myDAQ, myRIO)

  • Not able to set date and time

    I have a problem with automatic date and time will not initiate. I have wireless connection verified; my DHCP is properly configured, the latest i-Tunes software update, homesharing ID matched with computer and security firewall verified configured properly for allowing all incoming connections. Second Apple TV 2 bought in past two days where it will not update wirelessly. Is this a port problem, NTP, or related to software update that went wrong?
    Contacted router vendor to troubleshoot their device. Verified with my computer, the wireless router works. Has anyone seen this problem before?
       Thanks!

    Welcome to the Apple Community.
    If you have previously been able to use your Apple TV without this problem, you might try restarting the Apple TV by removing ALL the cables for a 30 seconds. if this doesn't help try a restore.

  • Can't set date and time, stuck on that screen. Also don't have ANY apps at all.

    Whats up Apple? My Apple TV is only a few months old. Can't set the date and time and now have ZERO apps. All that shows is the "Computer" and "Settings" after staring at that spinning wheel for an hour and finally clicking menu.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I lose my internet connection on my ATV2 with the last update the network works but the ATV´2 can´t set Date and Time

    Since friday I update my ATV 2 trough my Mac on that day, the device show me that it is connect to the network, all my anothers devices are working well with my wifi connection, I made some test, enter to my router config as another forums talkking about of the same trouble with the ATV, I´m so fustated than after made everythig that is possible to do I can´t fix the trouble, I can´t don´t back to the previus ATV version, when I try to enter to the Home Sharing or Itunes store the message are that I not conected to the internet and I have to setup date and time, I check the data and time on my dlink router and everything are ok there, ANY IDEA I´M TIRED to try to fix it all the day, reading blog making resets and everything possible, maybe I jump some stage.
    By the way the Aiplay is working on my network.
    Best Regards

    Ok thanks again
    Yes I try Ethernet cable from the ATV to the router
    I check the signal using the istumbler and the internet speed that I have on my anothere devices likes iphone, Ipad and my MacBook Pro the levelo istrubler screen is high.
    This is something that I doesn´t ry how I can configurate the port 123 on my router that is a DLINK, I set the time on my router tool page 192.168.0.1 and unchek the firewall as recomended on anothers old post.

  • APPLE TV 2 HD model and updated to latest version 6.1.1 since doing that it won't set date and time and tells me my Apple ID and password are incorrect and I know there not. What do I do?

    It connects to internet fine. I have tried restoring back to factory condition and hard wire update by connecting it to my Mac mini .
    The date and time won't set. And won't acknowledge my Apple ID and password......... I am usually tech savy but this has caused me grief .
    Do I need to downgrade my update....
    But can't get any menus until I log in my apple account...
    It can't log into my iTunes account until time and date have been set.
    When I did the hard wire restore connected to Mac mini it wouldn't go past the date and time screen as it wouldn't when I did the wifi update too.
    it just would get past that screen.
    Anyone help!!

    This is the result of a network issue.  Ensure port 123 on the router is open.

  • Ipad will not automatically set date and time

    My ipad drained and when I recharged it the date read 31 Dec 1970.  Now it will not automatically connect and update the date and time, and cannot connect to itunes.  I can recieve emails on this device but I can's send emails.  So it must have some kind of connectivity...would appreciate any comments or help.  Very frustrated.

    Try resetting it.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

  • My apple TV not able to set date and time

    Pl let me know how to signin in iTunes in apple as date and time is not working

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Network not able to set date and time

    Live outside of US and have my new Apple TV set to my Air Express WiFi network but I have not found a way to set the date and time. I have set my region time zone but stll no luck. I cannot move forward with the installation until I resove this problem. So far my Apple TV is only good for Air Play of my Spotify music and YouTube. Without date and time can't even set iTunes. Help!

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Maybe you are looking for

  • How to view Date and Time in messages app?

    How do I display the date & time of every individual message, in "Messages" app [Version 8.0 (4226)] for OS X (10.9.4) It seems to sort messages sent within a few minutes of each other as conversations, and only inserts a timestamp every 5 or 6 messa

  • Never had an iTunes version crash as much as 9

    I can't believe how many times iTunes 9 has crashed on me since first installing. I have literally lost count! It mostly (if not every time) seems to occur when browsing the iTunes Store. I have noticed it happening more than once when all I did was

  • Calibration Executive error during PXI-5610 sequence.

    When running the PXI-5610 procedure in Calibration Executive, I get the prompt "NI-FGEN Create Arbitrary Waveform - Cannot write Real data when Data Processing Mode is Complex. Disable OSP or set Data Processing Mode to Real."  The procedure the erro

  • Email image attachment problem

    I have an 8300 curve and when I attach an email from my device to send out, it converts to image to a .vcf file when others get it.  I am using a Novell Groupwise email system on a BES server that is pushing to my device.  I can send and recieve emai

  • After Installing after effects I get a Runtime Error Pure Virtual Function Call

    I installed After Effects, the trial, onto my pc which meets all the requirments, and I keep getting a runtime error.  I have reinstalled windows, i have used several registry programs and still nothign.  Please help!