Reminder days in purchase orders

Dear,
If we have a material with the following reminder days: 5 - 10 - 20
Then, the first reminder is send 5 days after the statistical delivery date (of course, if we run ME91F)
The second reminder 10 days after the SDD.
The third reminder 20 days after the SDD.
Is it true that the fourth reminder will be send after 30 days of the SDD? If not, when will it be send?
Thx,
Peter

Dear,
Reminders / Expediter are issued basing on the mentioned interval periods / days in purchasing documents. In case of purchase orders, the messages are issued to Vendors.
In SAP the term u2018reminderu2019 is often used to denote issue messages before due date, where as u2018urging letteru2019 or u2018expediteru2019 commonly stands for a message after due date.
In the system, we can enter up to 3 reminder levels, with positive numbers, negative numbers or combination of both.
A negative number of days means that a reminder is to be issued to the vendor n days prior / before to certain date, positive number of days means that a reminder is to be issued n days after the due date.
As far as I know, there is no 4th reminder level or assumption of 4th reminder automatically basing on previous reminders set - My answer is NO.
Regards,
Syed Hussain.

Similar Messages

How to update EKPO-MAHNZ ( reminder counter) in purchase order created?

There is the requiremtn to update the field EKPO-MAHNZ in a just created purchase order (PO).
It is for the purpose of data migration. So a PO is created from file data using BAPI_PO_CREATE1 but this BAPI seem not to provide a way to update the mentioned field in the EKPO table (position data of PO).
Is there any other way?! BAPI!? to achive this!?
Any help or suggestion is welcomed!
CN

>
Vamshi_1468 wrote:
> Hi dude,
>
> If the field is not available in BAPI_PO_CHANGE...then go for BDC...run a recording and update the field...only way out...
>
> Regards,
>
> Vamshi
Thanks for your reply!
Batch input would be an option but the field is not ready for input in ME22n.
Any way around it?

Restricting Changes in Purchase Order

We have a scenario where we do not want to use release strategy owing to vast no of transactions in Purchase Order creation.
But we want to restrict users to make changes in Purchase Order afte one day of Purchase Order Creation.
For Ex : if a user has created a purchase order on 31/12/2010 , he can make changes to that purchase order n number of times. But when he tries to make changes to the same purchase order on 01/01/2011, he gets an error message and only this right of changing the PO will be assigned to one Login ID.

Hello skbagaria1977,
As far as I know there is no standard solution for that, you will probably have to create you own checking routine ! This scenario is too expecific for a "standard solution" !
Sorry for not being able to give you a more positive answer =/
Cheers!
Plauto

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya

Purchase Request (PR) to Purchase Order (PO) days taken

Expert,
We are using SAP 9.0 PL4
We need Query for PR to PO days taken
Example
I make Purchase Request on 05/09/14 than make Purchase Quotation on 07/09/14 finally made Purchase Order on 10/09/14 with line item 5
We need report
From PR date to PO date. How many days taken?
My problem is how to join with PR to PO directly because PR to PO not tag directly in between we made Purchase Quotation.
Please advise
Thanks in advance
Mukesh Singh

Hi Mukesh,
Try this query. It connects the 3 tables that you need. You need to add the fields that you want to see on the report.
SELECT T0.[DocNum], T1.LineNum, T0.[DocDate], T1.[ItemCode], T1.[Dscription], T1.WhsCode, T1.[Quantity], T3.CardCode, T3.Cardname, T2.BaseType , T2.[BaseRef] , T2.[BaseLine], T2.DocENtry , T2.[Quantity] , T4.DocEntry, T5.DocNum, T4.Quantity, t4.price, t4.basetype
FROM OPRQ T0 INNER JOIN PRQ1 T1 ON T0.DocEntry = T1.DocEntry
left outer join PQT1 T2 on T1.DocENtry = T2.BaseEntry and T1.LineNum = T2.BaseLine and T2.BaseType = '1470000113'
left outer join OPQT T3 on T3.DocEntry = T2.DocEntry
left outer join POR1 T4 on T2.DocENtry = T4.BaseEntry and T2.LineNum = T4.BaseLine and T4.BaseType = '540000006'
left outer join OPOR T5 on T5.DocEntry = T4.DocEntry
order by t0.docnum, T1.LineNum
Regards,

Purchase Order Maintainer is unable to generate reminder / urging message

Hi all,
Purchase Order Maintainer is unable to generate reminder / urging message for purchase order.
In material mater reminder time is set as well in vendor master partner function is set.
But in ME91F message is coming like "Not possible to generate urging messages for all documents"
regards,
Nitin Patil

Hi,
The PO output should have been successfully processed before the urgig message to trigger.
The order generally is
PO output, urging and then reminders

Source inspection before 365 days of delivery date of purchase order

Hi Experts,
Business wants to create source inspection lot well in advance before 365 days of delivery date of purchase order. this lot is required to record results.
In SAP, transaction code QA51 allows only two digit characters for 'number of days for opening period' so system is not creating inspection lot for more than 99 days delivery date from current date.
Please advise.

Hi Patel, I really got interested on this particular issue because we have been using source inspection in our company for a while. After some investigation on ABAP code of report I will share with you my fact findings:
1) System calculates the start date of source inspection (delivery date from PO - Leadtime from q-info record). For example, in my test case it was 14.08.2015 - 0 days. So field g_datum below will be 14.08.2015:
2) System then checks if you are running the report in background (highlighted in yellow above). If so then it will check if the start date of inspection (g_datum) falls on opening horizon (g_datum_eroff). The opening horizon is calculated as per formula below (system login date + opening period). As an example: 14.08.2014 + 30 days = 13.09.2014.
Default opening period (p_eroff) is 30 days:
3) So all-in-all, when you are running QI07 online you´ll get a yellow traffic light on the long leadtime PO but you will be able to process it (on-line). However if you run the report in background (job scheduling) system will only create inspection lot to the relevant POs if the PO's delivery date falls on the 30 days window based upon the current date.

Fixed Day in a week as Delivery date in Purchase Order.

Dear All
I have the below requirement
For a material/ vendor combination users would like see always a fixed day as delivery date in Purchase Order.
For example for a Material X and Vendor Y always Wednesday of the week should be delivery date.
Whether this can be achieved ?
Can you please let me know your thoughts on this
Regards
Shyam

Dear Jurgen
Thanks for referring to the post.
But actually my requirement is bit more specific. For material-vendor combination the deleivery date should be a particular day in a week
Ex : Material X and Vendor X1 = Monday
Material Y and Vendor Y1=Tuesday
This requirement I believe is quite difficult in achieving for a PR from MRP. That's why I put the question as whether we can achieve this when we convert the MPR PRs to PO s ?
Please let me know your thoughts on this
Regards
Shyam

I bought this os four days before,but unfortunately havent succed to download it,before it give me error and when i go back to my purchase order i cant find its link to download again

I bought this os four days before,but unfortunately havent succed to download it,before it give me error and when i go back to my purchase order i cant find its link to download again

You buy one and only one download.
As it should have been transferred to your computer when you synced, you can contact itunes support and ask for an exception.
http://www.apple.com/support/itunes

Smart Form for Reminder Letters (Purchase Orders)

Hi All,
Is there a standard form for the reminder/urging letters for undelivered items in a purchase order. I've defined the purchasing value keys and I'm trying to see what the reminder letter looks like. Can anyone layout the steps to search for or update a smart form?
Many thanks in advance!

I believe I have configured everything correctly, however, when I try to generate the message from ME22N I get an error "incorrectly processed". What does that mean?
My processing routine is:
Medium - 5 External Send
Program: SAPFM06P
Form Routine - ENTRY_MAHN
Form: MEDRUCK
Smartform: /SMB40/MMPO_L

Purchase order reminder letter printing

Hi all
I have a purchase order with more than one line item with different statuses and i want to print the line items as separate documents, in other words i want to generate one separate form for line items with same status and if the purchase order has line items with 2 different statuses then 2 forms should be generated. At the moment the functionality only generates one form irregardless of statuses

U need to make changes to ur driver program, loop at ur line items table and depending on the line items u want to print in one form append them to an internal table and pass it to smartform fm inside the loop and clear this temp table at the end.
кu03B1ятu03B9к

Purchase Order list pending for MIRO days wise

i want to know t.code for outstanding Purchase order list dayswise which is pending for Miro....for example payments will be in 15days 30days which is mention in P.O.
Thanks & Regards
Rekha Sharma

Hello,
Please check MR11
Regards,
Ravi

Purchase order remainders

Hi,
Can you tell how to see the print preview for the purchase order remainder letters ? i had maintained ;purchasing value key but when i try in me91a the system show the message as " No suitable purchasingdocuments found.
Regards,
Renuga.A

As per the purchsing value key that you have set in the purchasing view of the MMR, the system will calculate whether to output an reminder letter or not. Say you have set the standard key 1 which has 10, 20 and 30 days configured in it, based on this on executing ME91A with proper selection parameters the system will output the document which delivery dates by 10, 20 or 30 days before the reference date specified in the parameter section for the material.

Purchase Order Dunning

Hi All,
I have two questions regarding reminder letters sent to vendors for pending items (as specified in purchasing value key):
1. What is the best way to automate the sending of these dunning letters to vendors?
2. Is there a way to view the dunning history for purchase orders. I know there is a way for finance documents...but not sure for PO's?
Thanks in advance for your help!

Hi,
1. For sending the message automaticlly, Run Me91F in the background and scedual the run every day (set the time at night so it wont interfir with anything)
in the parameters select Generate and save messages.
2.I don't really know about dunning history.
good luck

Send Auto mail to Vendors for Pending Delivery of Purchase orders

Hi Gurus,
I want to send an Auto Mail to my vendors according to their products as a reminder for the delivery of items of Purchase Order .
Please give the configuration changes required for the same
Thanks a lot in Advance
Sam

the message determination has to be customized, and the purchasing value key should have reminder days.
everything else is master data maintenance (material master, info record, message conditions)
http://help.sap.com/saphelp_erp60_sp/helpdata/en/6a/c1041badb111d1b6120000e8a738dc/frameset.htm

Reminder days in purchase orders

Similar Messages

Maybe you are looking for