Reminder Message

Dear All,
I have to send the mail on the basis of my date which i maintain in IT0019 (Monitoring of Task).
First I have to know how can i send mail.I need a step wise detail.Kindly guide me .
How i can create the dyanamic action for sending the mail based on the some personnal action.
Do'nt said that these detail alredy in frorum.I alredy search but not find accroding to my requirmrnt.
thanks

Hi Sandeep,
Ok...I am explaining little more.
1. You have already created notification content in SO10 Tcode.
2. You have already created distribution list in SBWP Tcode.
3. You need to create a feature which is copied from M0001 lets say named z0001. Then assign your text ID under IDTXT and distribution list under DISTR
4. Please note that under feature Z0001 (assume) maintain IT0019 > Then assign text and distribution list as mentioned inpoint 3.
5. You have already created Function module
6. Then set up dynamic action like below.
0019 06 3 P T001P-MOLGA='<Country grouping>'
0019 06 4 P PSPAR-MASSN='<Action type>'
0019 06 5 F '<Your Function module>'
0019 06 6 M Z0001
Your Question:-
1Q. Why I am using IT0034?
Ans:- Because I need to trigger notification after IT0034. If you skip IT0034, notification will not trigger. You need to save IT0034 to trigger mail. It was my client requirement. In your case, it will be IT0019
2Q. Why we writing this two times
0034 06 3 P T001P-MOLGA='08'/X (08 is UK)
0034 06 4 P T001P-MOLGA='11'/X (11 is Ireland)
Ans:- Same notification should trigger for UK (08) and for Ireland (11). Si as per SAP standard Functionality, we can maintain multiple condition by giving /X
3Q. what entry is needed in M0001
Ans:- I have mentioned above. Just check and revert for further clarification.
Regards,
Purnima

Similar Messages

How to set an 'alert' or reminder message for end-user Acrobat X form.

Hi,
I'm trying to see if I can add an alert or reminder message for the end user who will be filling in a form that I'm creating from Acrobat Pro X.
Does it require a script if so, could anyone share one that is already exists?
If it doesn't need a script, how can I set that up?
What I want to do, is to remind end-user to fill in Numbers Only and not text. I have already set my properties for numbers only and provided an example. But, In-case end users did not understand, I'd like to have a message for them to say that they must type in number and not text.
Currently, with the limitation I've made, they couldn't type in any letters but, they might be frustrated and not fill in anything!
Please help!
Thanks,

Thank you for the code.
Is it correct to put that code under VALIDATE > run custome validate script, within the Properties box?
Because I tried it, and it worked only AFTER I typed a number onto the field.
Since my goal is to have the alert BEFORE, so if someone typed in a text, they should see the alert and correct themselves to type in a number instead.
Please clarify.
Thanks!

Reminder message on Shutdown?

Hi all,
I use stickies to remind myself of important details when I log on to OSX.
I was just wondering if there was a way of reminding myself of something to do when I shutdown my Mac. For example, I want to turn off a couple of devices, such as my wireless mouse and keyboard and turn off a couple of other firewire devices. Ideally, a message (like a sticky note) will come on and say "Turn off devices" and then the shutdown process just continues on.
Any ideas?
Cheers, Paul.

For items intended to run at shutdown (as opposed to logout), you may want to consider creating an "/etc/rc.shutdown.local" script, or modifying "/etc/rc.shutdown".
As with loginwindow hooks, actions performed by the shutdown scripts are executed with "root" privileges so follow the usual security precautions to ensure that any downstream actions (such as applications or other scripts called by the shutdown script) are set up so that they, and the entire path to the item, are only modifiable by "root".
I was a little surprised on testing, but the shutdown script actually executes early enough to display an AppleScript dialogue.

Can iCal do a reminder message?

I'll be honest, I've never used ical. However working on my Dads mac, I would like to create a reminder or pop-up that he cant MISS to call me about tuning up his mac or doing updates every 4 months or whatever. Can ical do this? If, not, what app can?
In a couple months I would like something large pop up that says "Call Steve for Mac Tuneup " or similar? Like a pop-up post-it note...maybe?
Steve

Greetings,
When you add a new event in iCal (just double-click on the day you want) you will see a little field called "alarm". Click on this field to see a list of various choices. Use the "message" option to have a window pop up with a message. Message in this case means the name of the event.
This will pop up at the appointed time regardless of whether iCal is open or not.
Hope that helps.

AE 5.2: Reminder message character limit error

Hi,
I was trying to add some additional information into reminder email messages and when saving the changes I receive the message:
"You can not enter more than 800 characters"
My changes were not saved. The total text I had in the message (excluding subject) was only about 600 characters. How can I get around this apparently arbitrary character limit? What controls this?

Hi Ian,
behind the visible, SAP saves a lot of HTML Code for paragraphs, font style and sizing. The limitation of the database field will be 800 characters, including all the HTML tags you don't see.
If you look into the database table VIRSA_AE_WF_RQNTFC field NOTIFICATIONCONTNT you will see the "invisible" can be quite a lot!
Regards
Daniela

How to create a custon error or pop up reminder message in my form

I am creating a form that has a drop down box with multiple items to choose from. In the drop down list, if what they choose has an ** preceding the choice the user knows they must fill out an additional form. If the choice does not have a ** preceding the choice they know they do not have to fill out an additional form. My question is, is there any Java Script code out there that will look at the choices the user chooses & if they choose an answer that has a ** preceding the choice a reminder box will pop up telling them they need to fill out the additional form?

Hi,
Here is an example. The script is in the change event of the dropdown. Note this will NOT work if the dropdown binding is set to "specified values".
Good luck,
Niall

Reminder Message not working...

Is this another one of those "pull the battery" to reset? The 15 minute reminder didn't go off today before one of my appointments.

It wouldn't hurt anything. Did it not work for all of your appointments today, or just for one of them?
If you open the one that didn't go off, the Reminder field says 15 mins?
Try creating a test meeting and see if it goes off
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Reminder Message on Assignment to a Group

I'd like to issue a reminder notification when a task is assigned to a group and no action is taken - but this doesn't seem to work. I can get the reminders to function when a task is assigned to a specific individual, but when I change the assignment step to reference a group no reminders occur. Is the product limited to providing reminders only when the task is assigned to a specific user? Is there any work around for this - i.e. perhaps a way of interecepting some sort of reminder event and, within that, creating my own logic to send the notification I require?

Hi Jeff
I believe (although I haven't tested this) that the reminder is actually sent, but it's sent to the group email. That's an email alias associated with the group itself, rather than being sent to the individual members of the group.
Most LDAP administrators don't bother setting up group email aliases, so you end up with a blank email address, and so no reminder gets sent.
One way to work around this that we've used very successfully is to use a couple of custom componentss that we've built.
The basic design pattern is described here (for LC7, but the principle is the same):
http://www.avoka.com/apps/checkcookie?location=/resources/resources/AnAdvancedApproachtoTa skRemindersandEscalations.pdf
This works a little differently in LC8 - basically, you need to kick off a sub-process just prior to your User step, wait for 10 seconds in the sub-process, and then look up the task in the parent process. (Sounds complicated, but it's actuall quite simple.)
The component to take a group id, and turn it into a comma separated list of email addresses is LookupGroup.
http://avoka.dnsalias.com/confluence/display/Public/Lookup+DSC
and
http://avoka.dnsalias.com/confluence/display/Public/Find+Out+Details+About+the+Last+Form+U ser
If you need more details, please email info-at-avoka.com.
We should probably update the LC7 documentation to explain how it's done in LCES.
Howard
http://www.avoka.com

Safari Reminder Message

I recently bought a new iMac G5 which brought the latest version of Safari. I now have an annoying problem which I can't seem to get rid of. Periodically I get a popup reminder that I am still connected to the internet and do I want to disconnect or stay on line. I have looked for a solution in preferences and in the Help menu to no avail.
Any suggestions?
Thank you, john

Hi John,
Turn off the reminder preference at:
System Preferences -> Network -> (your connection
method) -> PPP -> (PPP Options...) -> Prompt every X
minutes to maintain connection.
Hope that helps.
That did it. Thank you
john
iMac G5 Mac OS X (10.4.7)

How to send a text message reminder of a calendar appointment through iCloud?

We use iCloud calendar for patient bookings in our Physio clinic. I've been told you can set up reminder messages to be sent as a text message (synced with contacts) through iCloud but have not been able to work out how to do this.
If anyone has any suggestions that would be great!

You cannot set up reminders for events that will be sent via iMessage or SMS.

How can I get a birthday reminder from items which are in the read-only cal

I am looking for a solution to get a reminder message for birtdays which are within the read-only calender imported/updated from he address book. I so far have not found the option where to turn on the reminder and I do not want to duplicate items (ie creating another birthday calender inside iCal).
Thanks for comments.
PB G4 Ti, 1GHz, 10.2.8 Mac OS X (10.4.7)

Hi ontour,
This limitation is one of the many reasons I wrote Dates to iCal. It is a replacement for the Birthdays calendar in iCal, so you would need to turn the Birthdays calendar off in iCal's preferences.
See here: http://discussions.apple.com/thread.jspa?threadID=466478
Best wishes
John M

ICal Alarm Message Is Almost Off The Screen.

After a couple of years of having a weekly reminder message, I have recently started getting them 90% off the screen.
Although I drag them to the middle before closing them, the next one always appears 90% offscreen.
I did update to Tiger but I am sure I received "normal" ones at first.
Any ideas?
Ian.

You aren't the only one - see this (very long) thread:
http://discussions.apple.com/thread.jspa?threadID=671199&tstart=0
Powerbook G4 1.5 GHz Mac OS X (10.4.8) 1.5 GB Ram

Alert message before report is generated - is this possible?

Hi all,
I have a report that is produced using already-retrieved records. It contains a number of parameter entry fields that pop up before report generation... but before the user fills out the parameter fields, I want to make sure they have remembered to enter data in a particular database field for all the retrieved records.
I thought this would be a "report alert" but that doesn't seem to fit the purpose.
Essentially, once the user clicks on the "Report" button, but before they enter parameters, I want the report to pop up a reminder message that says (for example) "PLEASE MAKE SURE YOU HAVE ENTERED THE OTHER DATA BEFORE CONTINUING WITH THIS REPORT".
I could just make this a parameter, however that isn't really what I want... I would prefer a hard popup message.
Any ideas?
-Kaz

Hi again Ido,
I should note that the main purpose of this alert is to tell the user that if they haven't filled in the necessary data in the database, that they shouldn't continue with the rest of the parameters (because they will get annoyed if they have to enter them all again - there are several more parameters than what is shown in my example image at the link above).
You mention record selection formula... however, this also won't stop the user from uneccessarily filling in all the other parameter fields, only to find that there is still work they have to do.
The main gist of what I want is an alert that pops up either before or at the beginning of the parameter entries, warning them to do the database entries first, before continuing with the report.
If this alert still points them towards filling out the rest of the parameters, then I may as well stick with what I've got because it at least clearly states that they should stop right now if they havent done the necessary prep work.
What I have now essentially does that, but I'd prefer if it didn't have an input field displayed with it.
many thanks for your time!
-Kaz

How to automatically generate messages

hello.
as part of the ongoing development of my video library system (done using Java, Swing + JDBC) - i must be able to generate an Overdue Reminder message and a Fine message in the form of JOptionPane messages. in order to do this i must be able read the loan information from my video library database so that i can generate such messages. i have pseudocode already made out for this.
IF ReturnDate is greater than 7th day
Display OverdueReminder
IF Product is not returned after OverdueReminder is issued
Display Fine
IF Fine is not paid
Display AccountDisabledNotice
how can i turn this pseudocode into code?

yes. what i have to do now is learn how to generate messages.
thanks for the reply.

Is there a way to show a "Ask for Confirmation" message at shutdown?

Purpose: I use a timekeeping app called Eon to log my time spend on my jobs during the day and if I don't post them at the end of the day the app forgets them when it restarts the next day. So I would like a reminder message to display when I select shutdown – and ideally continue shutdown when I click okay. I also don't mind if doing so means I have to select shutdown again after the message is displayed – much less annoying then trying to remember what I did the previous day when I forget to post these times.
I was hoping Automator would help, I can get it to show the message but there seems to be no way to do run this at shutdown.
There seems to be mulitple options to do something like this when you startup or login/logout but not for shutdown – unlike the old os9 days when you had the shutdown folder.
I have found a couple of possible solutions but their descriptions are too techy for my level of understanding to be able to follow.
Using Launchd: http://apple.stackexchange.com/questions/16974/how-can-i-make-mac-os-x-run-a-pro gram-before-shutting-down
Using a logout hook: https://discussions.apple.com/message/22003575#22003575
Alternatively if I could edit the "Are you shure you want to shut down your computer now" dialogue box message to incorporate my reminder?
Any thoughts would be apprieciated.

Nice try ;~). And I know that I could just stick a postit note to my screen to remind me also – but I was aiming for somthing a bit of elegant.
Ideally the developer needs to have a message come up if the are outstanding times not posted - much like the "you have unsaved document " dialogue box. I shall put this suggestion to them.

Reminder Message

Similar Messages

Maybe you are looking for