Reminder to perform Service Entry Sheet

Hi All,
May I know is there any existing reports that I can utilise to send reminder to user to perform Service Entry Sheet after services have performed?
Thanks.

Dear,
I have two solution for u.
1) Create different service entry sheet -ML81N for each line item and create single invoice verification for all service entry sheet - MIRO
2) Create service purchase order - ME21N for only one line item.
And include all services in service tab available at item detail level of service purchase order. Enter it's quantity and rate.
Than create one service entry sheet for purchase order.
So you can create one service entry sheet for all line item of services.
Note: - Use option 2 for easy process.
Regards,
Mahesh Wagh.

Similar Messages

Services performed in Service entry sheet

hi gurus
how can u enter services performed in Service entry sheet
copy from po
chose from service selection
drag and drop
manually

If u want to enter SES with ref to PO
ML81N--> Choose other PO--> Enter PO number and item ->press enter-> go to service entry sheet tab----> choose Planned service other wise press Shift+F6 from key board
system should default 100% automatically..proceed with that as ur wish

Service Entry Sheet Release Procedure

Dear all,
I want to assign a new Plant to an existing service entry release strategy. In CL20N for Class Type 032 and maintaining the Release Group and Release Strategy I want, I hit ENTER and the Class SERVICE_RELEASE is displayed, which is correct (it is a service entry release procedure).
Selecting the item and displaying the values for the Class, I have Plant, Order Type and Cost Centre. I added a new row, include a new Plant and hit Save. I get the message "Saving changes to assignments" and then I exit the screen.
However, to double check that the object has been assigned to the class, I check in SPRO>Materials Mgt>External Services Mgt>Define Rel. Procedure for Service Entry Sheet> Release Strategies to confirm that the object was created in the classification for service entry release procedure. BUT IS NOT THERE!
However, if I performed the assignment in Classification in SPRO for the release strategy, and check in CL20N, IT IS THERE!!
How come I have created in CL20N and it is not displayed in SPRO for the same release strategy? The object assignment was successful with no error msg. It is not possible that you have done it in CL20N and you have to do the same in SPRO, right? Doesn't serve the purpose..
Pls help.
Thank you.

Dear Sir,
Go to CL02 give the Class and Class type, click on change icon
Copy the characteristic of Plant from Char. Tab
Then Go to CT04
give characteristic which is copied from class and click on change icon.
enter your new plant in Values tab, Save back
Go to CL20N, give release group and release code for which you want to maintain the new plant.
give the plant and save enter.
i hope this will help you.

Service Entry sheet to be set as Not accepted status

Hi
After flagging the Transfer check box in the Settlement Tab in item details of shipment cost document(VI03), the Purchase order(ME23N) and Service entry sheet(ML81N) are automatically getting generated. PO and Service entry sheet numbers can be seen in Service Procurement tab.
Question 1: When I separetely look into PO, I am unable trace back the flow. I mean, there is no reference of Shipment cost number in PO.
Question 2: I want the service entry sheet to get on hold/not accepted status so that i can add the list of services performed by the Forwarding agent / service agent mentioned in Shipment cost document.
Question 3: I have made Release strategy for Service entry sheet which is properly working when i am accepting the entry sheet manually. But it is not working when the shipment cost document is triggering PO and Service entry sheet automatically. Actually, It should hold the service entry sheet from not being accepted.
Note: This subject is a mix of Transportation (Logistics Execution) and External Service Management (Materials management). The moderator of this forum can take a call on placement of this thread under suitable section.
Thanks
Maruthi Ram
Edited by: MARUTHI RAM on May 26, 2009 9:31 PM
Edited by: MARUTHI RAM on Jun 4, 2009 2:50 AM
Edited by: MARUTHI RAM on Jun 5, 2009 8:29 PM

not solved.

What is the use of service entry sheet in plant maintenance module.

Hi Expert,
I want know about, What is the use of service entry sheet in plant maintenance?
Regards,
Ram Rathode

Hi dear,
Service entry sheet concept is used in all the modules.
Service entry sheet is created to do the service confirmation and to pay the vendor for the services which he has performed.
Based on the service entry sheet invoice is booked by Finance.

*Unable to create Service Entry Sheet.*

Hi,
Iu2019m trying to create service entry sheet for a service PO but all the item level fields in ML81N screen are appearing in display mode (non-editable) also I cannot see the u201CService Selectionu201D button. So Iu2019m unable to insert/select the service detail and cannot create the entry sheet. If I use the menu path Edit->Service Selection, still cannot adopt services and system gets busy for a substantial period and eventually timed out.
Please helpu2026
Iu2019m using ECC 6.0
Thanks, Pratap

Service PO: Intangible good that is the subject of business activity and that can be performed internally or procured externally (outsourced).
-     Services are regarded as being consumed at the time of their performance. They cannot be stored or transported.
-     Examples of services include construction work, janitorial/cleaning services, and legal services.
Steps involved in Service PO:
1.     Define Organizational Status for Service Categories, in IMG - MM - External Services Management.
2.     Define Service Category, Enter Service Category, Org. Service Category, External Number Assignment
Without Validation, Acct. Category Reference & Service Category Description.
3.     Define Number Ranges for Service Category.
4.   Create Service Master Record (AC03), SAP Menu u2013 Logistics u2013 MM u2013 Service Master, Enter Service Category,
      Base unit of measure, Mat/srv.grp (007 u2013 Service), Division, Valuation class u2013 3200 & Service type.
5.     Create Service PO with Acct. Assignment u2013 Cost Center (K), Item Category u2013 D, Material Short Text, Mat. Group, Plant, Entry for Services in Item Level i.e. Service No., Quantity & Gross Price u2013 Save.
6.     Maintain Service Entry Sheet u2013 ML81N in SAP Menu u2013 Logistics u2013 MM choose PO in ML81N edit and save.
7.     Then do MIRO from PO reference u2013 Service Entry sheet.
8.     Collective Release of Service Entry Sheet u2013 ML85
Organizational Status for Service Category: The organization status indicates the areas in which service master records are used.
Service Category: The service category is the most important criterion for structuring service master records. It provides a default value for the valuation classes. Service master records can be assigned to number ranges on the basis of the service category.

Purchase Order: Queries related to Service Entry Sheet (ML81N)

Requirement:
A user exit to be trigger during the changing (update) of service entry sheet, This user exit should have a code which will go and check the credit memo in RSEG- SHKZG where the value is “H” and will check RSEG- LFBNR number with ESSR-LBLNI and compares RSEG- SHKZG with ESSR- NETWR value of the service entry sheet. if the value is less then or more then ESSR- NETWR (service entry sheet) value it should throw an error “"Amount must equal Service Entry”.
If the RSEG- SHKZG value and ESSR- NETWR value are equal it should allow to revoke the service entry sheet.
Scenario: When user clicks on Change button in ML81N for changing the Service Entry Sheet(existing one), an exit should trigger the error message and should not allow to change.
Please suggest how to achieve it, which Exit to use where I should code?

Hi Amol
Why you created Framework Order ?.. You can not change account assignment category in service entry sheet..e.g. K-Cost Center.. F- Order
But depending upon settings, you can change account assignment values such order 1 to order 2
If there are requirement that SES can created for Account assignment F or K. I recommend you to use following approach
1. Create a Contract - ME31K with AAC as U- Unknown (If business already have rates negoiated with vendor for services)
2. Create release order with reference to contract and system will prompt you to enter AAC- it can be K or F
3. Perform SES w.r.t to Release Order.
Other Approach can but not strong one.. create two line items in the PO. one with K and Other with F.. then choose the line item at time of SES creation that business want to book the cost on CC or Order.
Thanks,
Jagdeep

Cancelling Accepted Service Entry Sheet

Hi experts,
Service purchase order was created and service entry sheet was also accepted. After this user has also deleted this PO item. Now, how to cancel this accepted service entry sheet?
please. help me out
jay

Hi
first remove the deletion flag from the PO line item, Now goto ML81N & enter the service entry sheet whcih needs to be cancelled, Click on Change &
Click on Entry sheet in the menu bar-.
Click on Status Revoke Acceptance. & save the Entry sheet
If you have relase strategy for the Entry sheet first cancel the relase using ML85 & then perform the Revoke acceptance in Ml81N
Thanks & Regards
Kishore

Query related to Service Entry Sheet for maintenance order

Dear Gurus,
I am little bit confusing while entering SES for maintenance order,
Do we need to enter both Maintenance Order# & Cost Center# in Account assignment tab of SES?
What is impact of entering both in SES?
What is standard procedure of accepting services for maint order?
Thanks in advance.
Regards,
Amol.

Hi Amol
Why you created Framework Order ?.. You can not change account assignment category in service entry sheet..e.g. K-Cost Center.. F- Order
But depending upon settings, you can change account assignment values such order 1 to order 2
If there are requirement that SES can created for Account assignment F or K. I recommend you to use following approach
1. Create a Contract - ME31K with AAC as U- Unknown (If business already have rates negoiated with vendor for services)
2. Create release order with reference to contract and system will prompt you to enter AAC- it can be K or F
3. Perform SES w.r.t to Release Order.
Other Approach can but not strong one.. create two line items in the PO. one with K and Other with F.. then choose the line item at time of SES creation that business want to book the cost on CC or Order.
Thanks,
Jagdeep

MIRO without Service Entry Sheet

Hi,
We have a odd requirement to have the MIRO done before the Service Entry Sheet. The business process is as follows:
1. User will raise a Service PR and then a Service PO will be raised.
2. The services will be carried out at the plant.
3. There will be a central location for Invoices and the vendor might send the invoice before the Service Entry Sheet is created.
4. To manage the huge load, the MIRO will be posted and will be blocked (Since Service Entry Sheet is not created).
5. The Blocked Invoice will trigger a workflow which will be sent to the requestor reminding that a Serv Entry Sheet has to be created.
6. The requestor will then create a Serv Entry Sheet and the Invoice will be cleared.
Std SAP does NOT allow the MIRO without the Serv Entry Sheet.
Any feedback will be appreciated.
Amit

Hi
you can do this way-
step1-
You can change the Error message into warning which you are getting during invoice posting ( in absence of SE) or
make the changes in std SAP invoice posting code
see at which stage SAP code validate whether Service Entry is exist for given PO.
If SE is not there then instead of allowing to throw an error message, and bypass the error message with warning message.
Step2
you pass the MANUAL BLOCK on invoice via user exist . As soon as you post the invoice, Invoice will have header level block (you can see the invoice in RSEG table RSEG-SPGRQ)
Step3
there should be one function module which will fetch the requisitioner ID from Purchase Order ( ARNAM or AFNAM, based on company policy)
logic- if invoice has manual block , then get the requestor's ID and send a notification via WF to requestor 2) you need to schedule a job which will call T code MRBR with option Manual Block to release the invoices
Process- Once SE is done by requestor and subsequent GR is created automatically, the job will run as per the schedule and invoice will be unblocked
Hope this will help you

Automatic Invoice Verification ( ERS )- without GR or Service entry sheet.

Dear All Experts,
I am FICO consultant . New to MM, would like to have experts guidance / inputs whether it is possible to perform automatic invoicing without GR or Service entry sheet ?
I have scenario where client wants to automate invoicing.
Secnario : We have PO for 5 years for RENT where in existing system there is no receipt happens and every month it directly goes for invoicing.
Can same be possible through ERS ?, as I studied ERS automates the GR * Invoice process on only agreed condition. is ERS a suitable solution for this kind of scenario ?
MM experts guidance / inputs will be very helpful.
Regards,
Revati Joshi.

Hi
Secnario : We have PO for 5 years for RENT where in existing system there is no receipt happens and every month it directly goes for invoicing.
You can achieve this by invoice planning in Sap MM
there are two type of invoice planning in sap mm 1)Periodic Invoicing Plan 2) Partial Invoicing Plan,your requirement fit in Periodic invoice planning
check following link it will help you to configure for same
[http://help.sap.com/saphelp_46c/helpdata/en/75/ee0d3355c811d189900000e8322d00/content.htm]
[http://help.sap.com/saphelp_46c/helpdata/en/ea/6e1b769e0111d1a39b0000e8a522f1/content.htm]
[http://wiki.sdn.sap.com/wiki/display/ERPSCM/MM-SRVTheInvoicing+Plan]
Regards
Kailas ugale

Need reasons for blocking Purchase requisition and service entry sheet.

Hi All,
I need reasons for blocking service entry sheet and purchase requisition.
Also want the reasons for reversing the approval of service entry sheet.
Its urgent ......

Hi Nilesh,
It is not possible to block a service entry sheet as such. You could only revoke a service entry sheet. Some of the possible reasons are, you are not satisfied with the quality of service provided by the vendor. Or it could also be due to change in the services to be performed or it could even be as simple as erronous entry of services in the entry sheet.
However from ERP 2005, it should be possible to return the services by marking the returns indicator.In case of materials, it is possible to put a materials PO on hold. But in case of services, the hold option does not arise as a service cannot be performed/completed till all the approvals are received.
Hope this answer helps you.

Service entry sheet doubts

Hi all,
Is service entry and service acceptance done separately, that is first enter the services done and save it; then again accept the same services. What all documents are created while accepting a service. Is there any difference between canceling and revoking a SES.
regards
amhn

Hi Ajay
The services actually performed (work actually done) by a service provider are recorded in a Service Entry Sheet with reference to the purchase order.
A service provider's invoice relating to a certain invoice can be entered only after the entry sheet has been accepted.
Actually the accepted entry sheet is the basis for IV process.
regrds
Yogesh

Service PO and Service Entry Sheet

Hi
I am practicing on IDES, can anyone provide me documents/links related to subject matter.
What relation service po has with service entry sheet? can anyone explain me in brief?
Thanks and regards,
-Saleel

Hi,
A list of services performed by a vendor on the basis of a purchase order, containing service descriptions and details of quantities and values.The descriptions of planned services deriving from the purchase order are used as default descriptions in the service entry sheet. Unplanned services that were entered in the purchase order without descriptions using value limits are precisely specified in the entry sheet.
Creaion of service entry sheet _ ML81N
Acceptance of service entry sheet - ML85
1. Me21n
2. Give vendor,PO,Pur.Grp.Co.Code,
3. Account Assignment - K (Cost Center)
4. Item category - D (Services)
5. Give Short text (note Do not give material)
6. Po Qty,Net price, Cur,Plant and Sloc.
7. Enter - ne window opens ie Invoice,here you have to give cost center,and G/l account has to be maintain.
8. In Item details you give your service text,Qty,Unit of      measure(Hr,daily,)gross price
   check & save
   Po created under the number 4500015377
A service PO can be closed by ticking the "final Invoice" check box in Item details->"Invoice Tab".
http://www.sap123.com/showthread.php?t=52

Service PO and Service Entry Sheets Question

Hi Guru,
I need some advice on the following questions in service PO and service entry sheets.
1) How can i change the default unit of measure in service PO? where is this in customizing?
2) How can i turn off the message "No message record could
be found for output of message.Save anyway?" when i try to accept a service entry sheet entry?
3)Can someone share with me the business process for service PO?
Is it a must to do MIRO against the service entry sheet? How does the the person who is performing the MIRO transaction knows the service entry sheet number?
Thanks.
Zhulk

HI,
Following are answers to some of your questions -
1) What do you mean by default unit measure? If this is the unit of Service, then you may change this in Service Master (T Code AC03). If the unit is at line item, then it should be AU, because you may order multiple services under one line each having different units of measure.
2) The message "No message record could be found for output of message. Save anyway?" is displayed because, you have not maintained output message for service entry sheet. Either define the output or remove the warning message at Attributes of system messages.
3) The process of service PO is same as material PO. The difference is that the item category for service PO is 'D' & then you maitain services for the line item either with or without service master. After completion of service, you create service entry sheet at transaction code ML81N & after accepting the service entry sheet, service entry sheet based GRN is prepared. The person who is posting MIRO is not required to know Service Entry Sheet number to post MIRO. The system automatically checks the service entry sheets accepted. Anyway, the service entry sheet number can be displayed at Purchase Order History tab of the conccerned PO at PO display option (T Code ME23N).
Hope your query is fulfilled.
Reward points if the answer is helpful.
Regards,
Prashant Kolhatkar

Reminder to perform Service Entry Sheet

Similar Messages

Maybe you are looking for