Reminders app issue following the clock change

Hi
I've seen some Q10 users reporting this same issue but not for the Z10 but with no solution yet. Since the clocks changed and we moved into Daylight Saving Time, I've found an issue with my Reminders app. All reminders (including those set before and after the clock change) flash up one hour before the time I've set it for. The clock is correct, as is the timezone, and the lock screen (which shows the next event) shows it at the correct time - it's the physical reminder which is one hour out.
I've tried a hard re-set, pulling the battery out, connecting to the BB Link on my laptop but nothing has sorted out. I don't know if this is related or not but my phone also did not automatically update the timezone following my return from a trip away (even though it was set to automatically update). I manually changed it and it now shows correctly as 'Dubline, London). But, if I turn the 'automatically update timezone' off, and then back on again, the phone automatically shows as Brussels time ie. one hour ahead. As with the above issue, phone re-sets did not resolve this issue.
Any advice on either, or both, issues would be much appreciated.
Many thanks
J30Turner

Note to self : read the f@%king wiki
sudo netctl disable wlan0-jsk

Similar Messages

TS3274 I was just moving some of my apps around and the background changed to an x-ray look ,,, I don't think I touched anything ,,, How do I get it back to the original ????

I was just moving some of my apps around and the background changed to an x-ray look ,,, I don’t think I touched anything ,,, How do I get it back to the original ????

Settings>General>Accessibility>Invert Color>Off

I can't use my reminders app... the notes don't sync...

I can't use my reminders app... the notes don't sync...
Also, for some reason -- I'm unable to sync my notes...
'Lil help?

It might be easier to help you if you told us what the probem is. Preferably in complete sentences with the words spelled out. Provide as much detail as possible, including what, if any error messages you've received and what troubleshooting steps you've already taken.
Best of luck.

2.23 Apps must follow the iOS Data Storage Guidelines or they will be rejected

My Multi Issue v14 App (24124) was just rejected by Apple. Apparently because storage of the data (folios?) was not iCloud compatible.
Is this related to v14? Would building a v15 app resolve the issue?
or is there some other problem?
Please advise...
Full text of Apple rejection below...
Nov 4, 2011 08:17 PM. From Apple.
2.23
We found that your app does not follow the iOS Data Storage Guidelines, which is not in compliance with the App Store Review Guidelines.
In particular, we found magazine downloads are not cached appropriately.
The iOS Data Store Guidelines specify:
"1. Only documents and other data that is user-generated, or that cannot otherwise be recreated by your application, should be stored in the /Documents directory and will be automatically backed up by iCloud.
2. Data that can be downloaded again or regenerated should be stored in the /Library/Caches directory. Examples of files you should put in the Caches directory include database cache files and downloadable content, such as that used by magazine, newspaper, and map applications.
3. Data that is used only temporarily should be stored in the /tmp directory. Although these files are not backed up to iCloud, remember to delete those files when you are done with them so that they do not continue to consume space on the user’s device."
For example, only content that the user creates using your app, e.g., documents, new files, edits, etc., may be stored in the/Documents directory - and backed up by iCloud. Other content that the user may use within the app cannot be stored in this directory; such content, e.g., preference files, database files, plists, etc., must be stored in the /Library/Caches directory.
Temporary files used by your app should only be stored in the /tmp directory; please remember to delete the files stored in this location when the user exits the app.
It would be appropriate to revise your app so that you store data as specified in the iOS Data Storage Guidelines.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. Please be sure to include any symbolicated crash logs, screenshots, or steps to reproduce the issues when you submit your request. For information on how to symbolicate and read a crash log, please see Tech Note TN2151 Understanding and Analyzing iPhone OS Application Crash Reports.
To appeal this review, please submit a request to the App Review Board.

You might want to check out our ANE (Adobe Native Extension) solution that enables your FB projects to abide by the Apple's Data Storage guidelines.
https://developer.apple.com/library/ios/#qa/qa1719/_index.html
Do Not Backup project:
http://www.jampot.ie/ane/ane-ios-data-storage-set-donotbackup-attribute-for-ios5-native-ex tension/
David
JamPot.ie

Ios 5 Reminders apps issue

Yesterday I upgrade my 3GS to IOS 5 and was fine, I tested every feature and not problem at all but today Reminders apps just show me up Completed screen, I can't create tasks anymore. Anyone knows what I have to do to back Reminders to life?

I attached 2 pictures that you can see there is no other screen than Completed even I swiping.

The Reminders APP: Geo-Parameters

One of the things I was MOST excited about with the Reminders app, was the ability to set geo-parameters for things like "remind me to grab milk when I leave work". I'm VERY forgetful about things like this, so this is an extremely helpful option...
HOWEVER, it seems there is a downfall...
When I say "remind me when I leave" it allows me to set a parameter around my current location, which is great, because I don't have to give it any specific address, it just knows, then when I leave that location, my phone beeps and says "hey, don't forget this". The problem here is, I'd like to set things like "remind me to get cat food when I get to the grocery store", which is where it all falls apart. Rather than simply being able to drop a pin and say make a parameter around this spot on a map, I now have to add addresses into my contacts section of my phone, before I can allow it to remind me of something upon arrival. I don't feel like I should have to close the app, find the address of my grocery store, create a contact for it, then go BACK in to the Reminders app, and add the location through the contact. I think you need to remove a step here and not assume that the average person wants to have every possible place they might need to set a geo-parameter added as a contact in their contact book. If they could simply allow a quick link between the reminders app and the maps, I could just drop a pin and say set this as the parameter around my grocery store.
I realize that in the grand scheme of this amazing software, this is a VERY minor detail, but seeing how detail oriented apple likes to be, i'm suprised it was overlooked.

Hey Nickac8200,
If you are having issues with your being unable to add Reminders on your iPhone, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Be well,
Brett L

Clock changes time randomly

Has any one had any issues with their clock changing time randomly on their iphone 5c? it will go up in time then back several times during the day. I am the only one in the house that this is happening to

If "Automatic Time" is turned on in Settings, the time is coming from the cell towers. Contact the carrier to address.

Reminders.app locations

I can't seem to get reminders.app to update the list of location-based reminders. When I type "home" in a location based reminder, it pulls up two old "home" addresses I had listed...I tried changing my contact card to another one then changing back, but it didn't seem to refresh. I couldn't find a pref file or anything else that I could delete...any help?
It seems like it is caching addresses somewhere.

Well it turns out it can't be done. This strikes me as odd as the buildup of unwanted locations makes the app cumbersome to use. If you have the same problem may I suggest you file a complaint with Apple here.

Odd clock drift since summer time clock change

This is a weird one. Since the clocks changed back for daylight savings time (here in the UK, on Sunday morning from BST to GMT) I've been getting a strange error: while I'm editing a file in vi(1), occasionally when I come to save it tells me the file has changed on disk (it hasn't).
I thought I was going mad until a colleague said he's seen the same warnings on his machine in Eclipse. It seems to me like the clock is constantly drifting/being adjusted - I'm syncing with NTP to time.euro.apple.com, and I am seeing a lot of NTP updates in the logs:
system.log:Nov 2 19:18:26 mightymac ntpd[34353]: time reset +0.280424 s
system.log:Nov 2 20:26:10 mightymac ntpd[34353]: time reset -0.857206 s
system.log:Nov 2 20:26:10 mightymac ntpd[34353]: frequency error -589 PPM exceeds tolerance 500 PPM
system.log:Nov 2 21:01:15 mightymac ntpd[34353]: time reset +0.974976 s
system.log:Nov 2 23:00:28 mightymac ntpd[34353]: time reset +0.557037 s
system.log:Nov 2 23:34:56 mightymac ntpd[34353]: time reset +0.960510 s
system.log:Nov 3 09:49:37 mightymac ntpd[34353]: time reset -1.004375 s
system.log:Nov 3 10:07:17 mightymac ntpd[34353]: time reset +0.491741 s
These are big jumps - a second, half a second, much more than I'd expect to see. Given it's happening on a colleagues machine we can rule out my clock battery or other local hardware/software issues, it's happening both when I'm at work and at home (on two different networks), and it's only happening since the summer time change on Sunday.
Has anyone else seen this? This is on 10.6.4, on two machines that have not been rebooted since the clocks changed.

I have a similar problem - when I start up my clock has advanced about 13 hours. It seems to have been doing this since daylight savings changed. It has the right time zone and I have unlinked synchronisation but it keeps happening even when it is locked.

CDX-GT565UP clock changes constantly

Had this player for some time. I listened to AM radio (news junkie) most of the time. Then I started listening to FM radio. Now the clock will constantly change time. I can set it to say12:15 then sometime later it will be some random time like 10:27 or 8:06 or 11:51. Anything but what it should be. It could take 10 minutes to change or 2 hours or it will change to 4 different times in 1 hour. There is no pattern that I can tell.
This time change does NOT occur when I'm listening to any source other than FM. It ONLY happens while listening to FM.
Any ideas ? ? ?
I'm old. I was trained on vacuum tubes. Everything I've worked on is either in the museum or on the History Channel.

You said...
This issue will occur if leads are not matched correctly with the car's accessory power connector. Make sure that they are matched correctly.
Exactly what leads are you referring to? Got a diagram?
To further clarify my problem further, the clock changes the time even thought I never turn off the car
Just today, during a 2 hour trip the clock changed 3 tmes.
I never turned off the car.
I'm old. I was trained on vacuum tubes. Everything I've worked on is either in the museum or on the History Channel.

Material with PPM allow the date change

Hi Experts,
I have a issue regarding the date change in process order which is effected by the APO scheduling dates.
Now i have observed that materials having PPM are not allowing me to change the dates even if i try manually.
But Materials without it are easyily taking the dates in changed mode.
My requirement is to change the date manually and APO should not effect the dates later on.
Any timely suggestion will be rewarded .
Reagrds
Athilles

Hi,
In R3, check under "Adjust dates" in define scheduling parameters for process orders ( OPUZ) what is the setting defined.
Try with different settings.
Thanks,
nandha

ICal reminders transfer to Mountain Lion Reminders app?

I have several reminders in iCal in Lion, assigned to a variety of calendars. When I upgrade to Mountain Lion, will those reminders transfer to the Reminders app, and will the various iCal calendars become "Lists" in Reminders, with the individual reminders correctly assigned to them?

My suggestion is before you upgrade to Mountain Lion, you should at least consider putting your reminders in iCloud. Here's an article on the subject: http://support.apple.com/kb/PH2599
And here's a broader iCloud article: http://support.apple.com/kb/HT4436
From experience, I can tell you that iCloud transitions easily from Lion to Mountain Lion.

My ipad2 clock changes everytime i sync to my computer..any advice? =(

my ipad2 clock changes everytime i sync to my computer..any advice? =(

yes. after i disconnect from my pc, i manually change the correct time in my IPad.
then, the minute i plug my IPad to the computer, the clock changes 2 hrs ahead again.
it only happens EVERYTIME i connect the IPad to my pc for syncing.
my Ipad is just 2 days old. im frustrated. it really bothers me...

Clock Change

Hi,
When the clock change happens, does SAP automatically adapt to these changes and appropriately schedule the jobs accordingly.
I was thinking whether we need to inform basis and check whether the jobs would be affected or not.
Any background scheduled jobs during clock changes, believe will be automatically handled.
Please confirm whether my assumption is right.
Regards
Anandh

Quote
Originally posted by bobinc
Is there a way to change the clock display from Army Time to a normal 12 hour format?
What OS are you using? If you're using XP, click Start, go to control panel and open up "Regional and Language Options." Now, click on the "customize button" next to the language that is displayed. Next, click on the time tab; on the drop down menu choose h:mm:ss:tt. Don't worry about the hh:mm:ss:tt choice. click on "OK," and then "OK" on the last dialog box.
For those who don't quite get "International" or "Military" time, all you need to do is subrtract 12 from the hour number when it is greater than 12:00. For example, 17:45 is 17-12=5--therefore 17:45 is 5:45PM. Or, you can ignore the 1 in the tens place and just subtract 2-- 7-2=5, ergo 5:45

Is there and app that does the following. Multiple apps are showing a clock in different rooms, all are synced together, one ipad is a master ipad and if you change the time on it all other ipads change the time

Is there and app that does the following. Multiple apps are showing a clock in different rooms, all are synced together, one ipad is a master ipad and if you change the time on it all other ipads change the time

None of the spreadsheet apps that work with Excel files offer anything like full native support in iOS. Apple's own Numbers app pairs down features for the iOS version. The hardware is simply not up to what a true computer is capable of, so all apps like QuickOffice, DocumentsToGo, Numbers and so forth offer reduced features from their computer-version counterparts.
I think a custom app will be your only real choice, be it a fully standalone app, or something built in filemaker or some other db-based platform.

Reminders app issue following the clock change

Similar Messages

Maybe you are looking for