Reminders are not created in Calendar, Outlook 2013

I am having the same issue many others are reporting.  Under Calendar options I have it set to default to 30 minutes when creating a new meeting.  However, when I create a new meeting request the default is zero.  I can manually change it
to what ever value I want.  There is a BUG in the software!  I cannot believe this software is being released to the general public in a few weeks. Outlook 2013, Windows 7 Pro.
The reminders go off as they are supposed.  Microsoft please fix this ASAP.

I am in agreement that this question is answered.  Can't link due to low points, but the responses of Microsoft employees on the threads of this forum I have seen are clear in that Outlook 2013 is functioning as intended with regards to this feature. 
If it were not, then I would agree it is a bug.  It is at most a design choice that some disagree with, and luckily Microsoft is receptive to user opinions (such as on the uservoice website.)  I can imagine some people may feel it would be best
to be consistent and honor the default event time, and the default reminder time calculated off of that even when added in month view.  I also can see the perceived advantage to the current behavior in 2013.
It adds an all-day event by default when you add an event in Month view. It does this regardless of what your default event time and default event reminder is set.
A user can't even see all the times of the events in a day in month view.  Because of this, perhaps the engineers assumed that most people adding events with specific times would like to know the context of when the other day's events are and would
switch to day, week, or workweek view prior to adding the time-specific event.  Leaving all events set to the default time of 5:00 PM with a 15 minute reminder would give you a deluge of reminders at 4:45 PM arbitrarily.
The good thing is it only adds a couple of seconds to deselect all-day and choose a reminder time when adding an event from month view.

Similar Messages

  • Mails are not downloading continuously in outlook 2013.

    We have faced the issue in outlook 2007.suppose,we are receiving 5 mails at a time.it is not downloading all the 5 mails.it is downloading only 2 and other 3 mails ,we are clicking send/receive button to receive the 3 mails.This was the issue in 2007 which
    i had faced.
    In same manner,outlook 2013 also we are facing the same issue.For example,we are receiving 10 mails and all the 10 mails are not at all downloading continuously.It is downloading and showing only two mails and manually if we click on send/receive button,it
    is downloading 8 mails.
    I request you to provide a solution for downloading all the mails(one by one) at a time.

    Hi,
    I think it should be related to the Send/Receive Group, please create a new Send/Receive group in Outlook and check if it helps:
    Click File, and then clickOptions.
    Click the Advanced tab.
    In the  Send and Recieve section, clickSend/Recieve.
    Under Group Name, click the group, and then click
    Copy.
    Under Send/Receive Group Name, type the new group name, and then clickOK.
    Under Group Name, click the old group name.
    Under both When Outlook is Online andWhen Outlook is Offline, click to clear the check box forInclude this
    group in Send/Receive (F9).
    Click Close.
    Quit Outlook, and then restart Outlook.
    Please also use the following steps to re-enable the Send immediately when connected
    option.
    Outlook 2013
    On the File tab, click Options.
    In the Outlook Options dialog box, click
    Advanced.
    In the Send and receive section, click to enable Send immediately when connected.
    Click OK.
    Outlook 2007
    On the Tools menu, click Options.
    In the Options dialog box, select the Mail Setup
    tab.
    In the Send/Receive section, click to enable Send immediately when connected.
    Click OK.
    I hope this can help. If the steps above still fail, try to create a new profile to setup the account:
    http://support.microsoft.com/kb/829918/en-us
    Regards,
    Melon Chen
    TechNet Community Support

  • Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

    I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

    Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

  • Users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply

    Hi All,
    Please help me.
    I have an issue where users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply. But they are can set Out Of Office automatic reply from OWA. My exchange server is Ms Exchange 2010.
    The test E-mail AutoConfiguration failed with this error:
    Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml starting
    GetLastError=12175; httpStatus=0.
    Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
    Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
    GetLastError=12007; httpStatus=0.
    Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
    Local autodiscover for mydomain.com starting
    Local autodiscover for mydomain.com Failed (0x8004010F)
    Redirect check to http://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
    Srv Record lookup for http://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x80072EE7)
    Srv Record lookup for mydomain.com starting
    Srv Record lookup for mydomain.com Failed (0x8004010F)
    Any idea?
    Thanks,
    Pieter

    OK.
    Please follow this step.
    1. As you said you are in coexistence step , so for now all endpoint already point to Exchange 2010 right?
    2. Check legacy owa redirect that you already configure
    3. In Exchange 2010 , Make sure that you already configure "Autodiscoverinternaluri" by this command set-clientaccessserver -identity "servername" -autodiscoverinternaluri
    https://autodiscover.domain.com/autodiscover/autodiscover.xml. and don't forget to create autodiscover record in DNS
    4. in Exchange 2010 , Make sure that you already configure "EWS" path by this command set-webservicesvertualdirectory -identity "XXX\Default web site name" -internalurl
    https://yourinternalurl/EWS/Exchange.asmx -externalurl https://yourexternalurl/EWS/Exchange.asmx
    5. don't forget to replicate freebusy from Exchange 2003 to Excahnge 2010 via public folder.
    You error look like client cannot get autodiscover process please check it again.

  • Fiscal year variant DD is not maintained for calendar year 2013

    Hi Experts,
    When I try to copy Reference chart of depreciation to current Company code.
    Below Error shown:
    Fiscal year variant DD is not maintained for calendar year 2013
    Message no. FGV002
    FSV created for 2014 as DD (shortend fiscal year July - Dec) and assigned to company code.am not sure why it is asking for 2013...
    Please help me.
    Thanks in advance
    Srinath

    Hi Srinath.
    The Fiscal year variant has to be maintained for the last open fiscl year.
    Best regards Bernhard

  • My reminders are not working

    I recently bought a 5s, and since I have had it none of my reminders which are set to repeat, work. If I set a one off reminder, it works fine, but not if set to repeat. Before this phone I had a 3GS, and  it had the same problem which started in August. I assumed that because the phone was old it was a fault with the phone and it was one of the reasons I finally decided to upgrade. Only to find I still have the same problem... I depend heavily on repeating reminders to stay organised and the app is really letting me down. I doubt it's an iOS 7 specific problem like some have suggested as my 3GS was iOS 6 and had the same issue.
    I've also tried testing with iCloud switched on and off. Doesn't make any difference...
    Any help really appreciated. I've tried looking online for a solution, but only a few people have raised this issue and no solution seems to have been found.
    Cheers
    Nathalie

    Hello there, Nathalie.
    The following Knowledge Base article provides some great recommendations for troubleshooting your issue:
    iCloud: Troubleshooting iCloud Reminders and Tasks
    http://support.apple.com/kb/ts4000
    Particularly:
    Troubleshooting Reminders on iOS devices
    If you're having trouble with Reminders on an iOS device (iPhone, iPad, or iPod touch) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
    Make sure that you're using iOS 5 or later. If you meet these requirements but your issue continues, tryinstalling the latest version of iOS supported by your device.
    Make sure that your iCloud account is configured correctly in Settings. For instructions on setting up iOS for iCloud, see iCloud Setup. Reminders is a separate data type on iOS. It must be enabled via the Reminders setting in Settings > iCloud.
    Make sure your iOS device is online. Attempt to view www.apple.com. If you can't connect to the Internet, your iCloud Reminders will not update in Calendar. Learn about troubleshooting your Internet connection.
    Open a secure website to test if ports 80 and 443 are accessible. Reminders requires port 443 access to iCloud to push and fetch updates to and from the iCloud Calendar and Reminders servers.
    If recent changes don't appear in Reminders, try forcing a refresh. In iOS 7:
    Open the Calendar app.
    Tap the Calendars tab to load the Calendars list.
    Pull down on the list to refresh both calendar events and reminders.
    If recent changes simply don't appear in Reminders, try forcing a refresh. In iOS 6 and 5:
    Open the Calendar app.
    Tap Calendars in the top-left corner to load the Calendars list.
    Tap the Refresh button in the lower-left of the Calendars list.
    Quit and restart the Reminders app on your iOS device.
    In iOS 7, press the Home button.
    Press the Home button twice to see preview screens of the apps you have open.
    Find the Reminders preview screen and swipe it up and out of preview to quit the application.
    Quit and restart the Reminders app on your iOS device.
    In iOS 6 and iOS 5, press the Home button.
    Press the Home button twice to open the multitasking menu.
    Press and hold the Reminders icon until it jiggles.
    Tap the red circle in the upper-left corner to quit the app.
    Press the Home button to get back to your Home screen. Wait a minute before reopening the Calendar app.
    Change the Sync settings for your calendars:
    In iOS 7 and iOS 6, tap Settings > Reminders.
    In iOS 5, tap Settings > Mail, Contacts, Calendars, then scroll down to the bottom to the Reminders section.
    Tap Sync. If Sync is set to All Reminders, set it to a specific duration, such as Reminders 1 Month Back. If it's already set to a specific duration, set it to All Reminders.
    Wait several minutes and refresh again, as described previously. Then open the Reminders app again.
    Turn iCloud Reminders off and back on:
    Tap Settings > iCloud.
    Turn off Reminders. Choose to delete data only if your reminders exist at icloud.com/#reminders and on one or more of your devices. Otherwise, choose Keep Data.
    Wait a few minutes before turning Reminders back on.
    Restart your iOS device: Hold down the Sleep/Wake button until the red slider appears, then drag the slider. After the device turns off, turn it back on by pressing the Sleep/Wake button until the Apple logo appears. This may sound simple, but it reinitializes your network and application settings and can frequently resolve issues.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Purchase requisitions are not created for Component by MRP

    Hi,
    I have created planned orders for assy. When I run the MRP the purchase requisitions are not created by  MRP for the components. If I check the planned order the components tab is showing all the raw materials list as per the BOM. The master data tab shows the BOM,Routing,Production version etc. But when I run the MRP the components planned orders/purchase requisitions are not created.  There is no stocks available for the components in the plant, still the purchase requisition are not created by MRP.
    I have tried in both transactions MD01 and MD02.
    I could notice one thing. Supoose if I enter 31.12.2009 is the order finish date, the system creates exception mesage 10- Rescheduling in with proposed date 01.12.2009.  Why the system is propsoing rescheduling in with date 01.12.2009 which past date.
    Please sugest.
    thanks and regards
    Murugesan

    Hi,
    I am using MRP type PD  for assy and components. There is no planned orders for assy.
    If I run MD02 the planned orders created for assy and purchase requisition are created for raw materials. But if I run MRP in MD01 neither  the planned orders nor the purchase requisitions created.
    I tried the Control keys NETCH,NEUPL but still the planned order and purchase requisitions are not created if I run using MD01.
    Please suggest.
    thanks and regards
    Murugesan

  • Call items are not created for Org BP's when created from Campaigns

    Hello All,
    We are creating Campaigns for Org BP's and pushing them to channel Phone, which is creating call list but call items are not created for Org BP's.
    Org BP's are maintained with Contact Person's, callling hours and phone number are maintained against contact person BP, but still call items are not created with in call list.
    Please let me know if I miss any further steps.
    Thanks,
    Raj.

    Hi Debasis,
    You can delete the PDS by using /SAPAPO/CULL_RTO_DEL - Delete Production Data Structure . And recif the it to APO. You can use CURTO_CREATE for it.
    For the error message /SAPAPO/OM_ERROR2 119 there are couple of OSS notes please check the same.
    1648558 - CIF error: 'Mode linkage problem with primary resource'
    1325227 - PDS-EXP: Mode linkage problem with primary resource
    Regards,
    RBrahmankar

  • New contacts are syncing between Outlook and iPhone but existing contact on iPhone are not showing up in Outlook, how do I get them into Outlook?

    New contacts are syncing between Outlook and iPhone but existing contacts on iPhone are not showing up in Outlook.  How do I get them to sync and into Outlook?

    Allan: This worked for this issue -- Thanks!
    https://discussions.apple.com/message/21353115#21353115

  • HT4191 I have iphone 5 and the latest iO7.1. Since upgrading to IOS7.1 birthdays added to a contact are not shown in calendar anymore. It use to show automatically before.

    I have iphone 5 and the latest iO7.1. Since upgrading to IOS7.1 birthdays added to a contact are not shown in calendar anymore. It use to show automatically before. Can anyone help?

    Click on calendars at the bottom of the screen. Make sure that birthdays are checked.
    We may think we have 1 calendar, but iPhone puts things in different calendars. Sometimes we can somehow lose one. Well not really lost, but somehow it just gets de-selected. So just make sure that all that you want to see are checked.
    One cool thing I like about this is that they have added US Holidays which didn't used to be there like on most paper calendars. Nice to have them available now!

  • Parameters are not created for M0001 feature

    Hi Friends,
    During Hiring activity in IT0002 after entering all the fields, while saving i got a warning message - parameters are not created in M0001 feature. Please give me your views & answers why i got this message.
    Edited by: sharada vemula on Apr 4, 2010 11:31 AM

    Hi,
    Go to PE03 enter M0001
    create a structure till Personal Area and enter **** unless you want to maintain Administrator group in here.
    Hope this helps
    Ajay

  • Contact details .. edited in iphone are not coming to my outlook account

    I am successfully able to configure my outlook 2007 with iphone. My only question is, if i make any changes in my contacts at iphone will the same be automatically reflected into outlook express 07 on my computer...after the next sync
    As I made few changes in contacts address at iphone but the same are not reflected back to outlook on my computer...
    Though when i make changes in outlook contacts on my computer the same are applied in iphone contact during my next sync...
    Pls. explain me why its one way only...

    Yes, it is supposed to work both ways. You might want to start by resetting the sync history in iTunes, do that in preferences. Go to Edit, preferencees, then the sync tab, and then reset sync history. Another thing to try is make sure there is no corruption in the pst file for your Outlook. You can do this by running a program that is resident to the computer that comes with Outlook, that is called scanpst.exe. That will check your Outlook file for errors. The last thing is to check once the iPhone is connected to iTunes what the status of the checkboxes is for syncing contacts. I believe that one or any combination of the things mentioned should get you back on track.

  • Backups of the JVM.CONFIG file are not created

    Backups of the JVM.CONFIG file are not created.
    CF10 > Server Settings > Java and JVM   in part says:
    Backups of the jvm.config file are created when you hit the submit button. You can use this backup to restore from a critical change.
    CF10 Help page indicates jvm.bak will be created:
    http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7ff c.html#WSc3ff6d0ea77859461172e0811cbf3638e6-7feb
    Note Help indicates incorrectly JVM.CONFIG and BAK are in cf_root\runtime\bin where as JVM.CONFIG is located cf_root\instance\bin .
    Thanks in advance, Carl.

    I must have not had enough coffee - JVM.BAK is created in where JVM.CONFIG is found. Pardon me.

  • How come Father's Day and Chanukah are not included in calendar?

    How come Father's Day and Chanukah are not included in calendar?

    Make sure you are entering events on an iCloud calendar, and not the On My iPhone (iPad) calendar or on a calendar from an external account such as Gmail (Google), Yahoo, or and exchange account.  Only your iCloud calendar will sync with iCloud.

  • On oracleXE 10g installation,  bdump, cdump, udump  are not created

    Hi all,
    I installed Oracle XE 10g on my system successfully, but in
    C:\oraclexe\app\oracle\admin
    folder, bdump, cdump, and udump files are not created. Any help, what may be the reason will be appreciated.
    Thanks in advance,
    Pal

    The SQL used to to create and configure a database excludes the ability to create the directories required. (unless using ASM)
    This means that before running the dbcreate shell script (or equivalent), the directories need to be created via the o/s itself - usually a command line script.
    The Oracle XE version for Linux combines this (the command line stuff and SQL stuff) into a single script in $ORACLE_HOME/bin/createdb.sh - I would expect that you will find a .cmd version of this for XE on Windows.
    In this script, the mkdir command is used to create the required directories before the sqlplus is launched to create the database.
    However, this script does not create separate bdump/adump/cdump/etc directories.
    It creates the following 2 directories:
    mkdir $logdir
    mkdir $filedir
    These are defined as:
    filedir=$ORACLE_HOME/dbs
    logdir=$ORACLE_HOME/log
    Then it configures the init.ora for the db create as follows:
    user_dump_dest=$logdir
    background_dump_dest=$logdir
    core_dump_dest=$logdir
    audit_file_dest=$logdir
    BTW, I suggest that you consider posting database questions in the [url http://forums.oracle.com/forums/forum.jspa?forumID=61]Database - General forum - this forum is specifically about the database SQL and PL/SQL languages. Not about db installation, configuration and so on.

Maybe you are looking for