Reminders are not keeping the date/time I set and are not reminding me.

When I create a reminder, I schedule the date/time to be reminded. Once I close the Reminders, the date/time are removed from the items in the list. This just started a few days ago. I haven't done an update; my phone is up to date.
Thanks!

Body text in all of the Page Layout templates is filler text, in Latin. It's there to show the user (that would be you) what a mass of text will look like on the page, without the distraction of having the words actually mean something in the language of the user.
That filler text is also "Placeholder" text. Click anywhere in the box holding that text and ALL of the text in that box will be selected. Type a single character, and ALL of the placeholder text will disappear, replaced by the character you typed.
(Some) Headline text in the same templates is in English (possibly in other languages in other localizations), which may or may not be a good idea. A headline reading "Vikings new Champs!!" could blind the user to several posible uses for that template. A headline reading "Lorem Ipsum" leaves those possibilities open.
Regards,
Barry

Similar Messages

My iPhone 5C does not keep the correct time.

The Time randomly changes by hours and minutes. This morning it was off by 3 hours plus some minutes. I am in the correct time zone and the Date & Time is set to Automatic; Time Zone is New York. I have another iPhone 5c in my house hold and it does NOT experience the same issue. Both iPhones are using the same Apple ID. I have not reset the phone yet because I will lose all previous text messages etc. I m also not able to connect to yahoo mail when the time is off and I am forced to send Text messages as opposed to iMessage, which has caused problems with my contacts NOT being able to text me. This is a huge inconvenience. I am on AT&T. I went to their Corporate store today and they told me they were unable to assist me, that I need to take my phone to an Apple Store. This is not acceptable. The nearest iPhone store is more than 30 minutes from my work AND home. I work late hours and it is very difficult to have to deal with this type of an issue. Please assist.

JRoet wrote:
The Time randomly changes by hours and minutes. This morning it was off by 3 hours plus some minutes. I am in the correct time zone and the Date & Time is set to Automatic; Time Zone is New York. I have another iPhone 5c in my house hold and it does NOT experience the same issue. Both iPhones are using the same Apple ID. I have not reset the phone yet because I will lose all previous text messages etc. I m also not able to connect to yahoo mail when the time is off and I am forced to send Text messages as opposed to iMessage, which has caused problems with my contacts NOT being able to text me. This is a huge inconvenience. I am on AT&T. I went to their Corporate store today and they told me they were unable to assist me, that I need to take my phone to an Apple Store. This is not acceptable. The nearest iPhone store is more than 30 minutes from my work AND home. I work late hours and it is very difficult to have to deal with this type of an issue. Please assist.
Doing a reset, does not cause you to lose data, however a restore as new will.
a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
If that doesn't work restore from your backup, if that doesn't work restore as new. If that doesn't work, then schedule an appointment with the Genius bar and take trip to the Apple store.

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

We have an iphone 5c that is not keeping the correct time whether using the auto update or manual selection. is this a os bug?

iphone 5c is not updating its time properly using set automatically. is this an os bug?

Hi TheLongRider,
Thanks for visiting Apple Support Communities.
I recommend this advice if the incorrect time is being set automatically:
Follow these steps. Test after each step to see if the issue is resolved.
Ensure that the version of iOS on your device is up to date.
If the option to enable date and time automatically is available, turn it on. Tap Settings > General > Date & Time.
Ensure that your time zone is set up correctly. Tap Settings > General > Date & Time > Time Zone.
If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
If you are setting the time manually and it is still incorrect, this advice may apply:
Note: If you find that your device's time is incorrect after you sync with your computer, your computer's time may be incorrect. Verify the computer's time in System Preferences > Date & Time (you may want to select the checkbox to set the computer's date and time automatically).
You can find this information here:
iOS: Troubleshooting issues with date and time
http://support.apple.com/kb/ts3920
Cheers,
Jeremy

Windows 8.1 will not keep the correct time on Dell PC - Clock worked fine when the machine had Windows 7 as OS.

I can set it manually or by Internet time sync but it does not keep time or update again from the Internet automatically.
Another real time wasting feature of Windows 8? Gosh Microsoft, I really need to get some productive work done!

Hi,
Meanwhile, you can also re-register time service in your Windows 8.1 system as a test
Open commmand prompt
In the Command window type net stop w32time
Type w32tm /unregister
Type w32tm /register
Type net start w32time
Check whether the time in your BIOS is correct.
If the Windows 8.1 and Windows 7 use different machines, and this issue only happened after you shut down your Windows 8.1 machine, then it might be the CMOS battery issue in your Windows 8.1 machine, you can consider to change a cmos battery.
Yolanda Zhu
TechNet Community Support

How do I keep the date/time when exporting photos?

When exporting photos from Photos.app on my Mac, it doesn't use the metadata that it displays in Photos--it uses the current date/time. So when I export a photo from 2010, it says it's dated 2015 when I import it into Aperture.
Is there a way to export an image with its original timestamp? Is this a bug? Thanks.

If you are editing tif files, then you have only a couple of choices.
Flatten the image before you save it. This will reduce it down to one layer. That's the smallest you can get.
When you first open the image, look to see if it's 8 bit or 16 bit tif. It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing. If it's started as 16, no worries!
check if you are saving with compression. Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
Cheers!

The Iphone 5C is not keeping the accurate time? Its gets stalled and we have tried everything. Help!

The iphone 5c time is stalled. We have tried everything to try to get it to work. It stays on the same time for hours.

Hello Idkallday!
I know your device sends and receives text messages! Let's get to work on this! Did you port your service from another carrier, or is this a new number? Is your previous device still powered on?
I also want to ask if you are able to use iMessaging, and if you see any error message when sending?
Please test it by sending a message to your own mobile number, and keep us posted!
ChristinaB_VZW
Follow us on Twitter @VZWSupport

Want to keep the data on one node and allow remote nodes to read it?

by default, we have a distributed cache with backupcount=1 and data is kept over all the members in equal parts
is there a way to do set it another way: i need only one 'main' node to put entries into the cache and keep them locally, while remote nodes can only read entries? the reason for that - i want to update the entries on the main node quite frequently (do not them travel anywhere over the network) - while remote read operations are infrequent. Also, Iwant the whole dataset survive the shutdown of any secondary node. In other words, I need 'all eggs in one backet' with remote read access.

Andrey -
Provided the 'remote/secondary' nodes are within the local area network, you could use a dedicated distributed cache service; storage enabled
on the 'main' node and storage disabled on the 'secondary' nodes. Access from outside the LAN will require configuring a proxy service on the
'main' node and 'secondary' node access over Coherence*Extend.
/Mark

The date,time,carrier logo are blue How do I fix?

the screen resolution is not right. the date,time and carrier logo are blue instead of white plus there are red lines.

Is the time zone set correctly in System Preferences > Date and Time > Time Zone tab?
If it's set to automatically detect TZ, uncheck and set manually.
Regards,
Captfred

"Show logging" displays the switch UP time not the Date & time

Hi,
i have cisco 2950 switch, when i type the show logging, what ever event has happend i am getting like this "26w6d: %LINK-3-UPDOWN: Interface FastEthernet0/24, changed state to down" but it is not showing the date & time when the event has occured, so every time i need to check the show version & have to see the switch up time & then i need to calculate. is there any configuration has to be done where i should get the information of the date & time in place of switch up time eg. like this...
"Sep4 4:15: %LINK-3-UPDOWN: Interface FastEthernet0/24, changed state to down"

what you could do is to enable timestamping if not already done so.
2950(config)# service timestamp debug datetime msec
2950(config)# service timestamp log datetime msec
or you can use SNMP to provide traps of the 'events' that occur on the device.
these SNMP traps will provide the date, time and trap.
what version IOS on that device? have you enabled timestamping? have you upgrade lately? perhaps an upgrade could be of assistance. i'll verify the operation on some 2950s i have to confirm if i have the same issue or not and what version is being used. i'll post the result when available.

How to display the Date Time using the System Time zone

Friends,
Can anyone help me with below scenario..
I have to display Date Time on a jsff page, This value associated to one of Transient View object populated from the database.. Is there any way I can handle on the screen to display the same date /time bassed on the system time zone ?
I know one way how we can handle it.. while populating to View object we can set the time based on the system time zone.. but it would be easy and simple if there is any approach I can use on UI layer itself..
thanks

I don't understand why this display doesn't pay attention to the date/time format settings that are set in the language and text prefs.
Those settings are used for date OR time, and provide for different displays depending on the space available. The menu bar does not have a fixed space available, and wants both date and time.
In Leopard, it used the medium time format. To get the date and time, you could modify that format to include the date, but that could cause problems with software that happened to use the medium time format and expectede just the time. Also, you might want to change the medium time format without changing the menu bar display. For these reasons, Snow Leopard's menu bar clock uses its own formatting for data and time display.

How do I change the date/time of a dll created in LabVIEW without killing it

I use the LabVIEW (6.0.2 of course) Application builder to create a dll, and I cannot enter creation information, nor can I modify the date time property, which labVIEW does not properly set. I have tried to modify this information in Visual C++, but that destroys the dll because it wasn't compiled in VC++, and therefore isn't compatible.
If anyone knows how to correctly modify the date/time (and the checksum) without destroying the dll, I would be gratefull to know.
Thank you

Dear Sir,
I was browsing through MSDN in trying to find the info you are looking for and I step into this next file:
"Peering Inside the PE: A Tour of the Win32 Portable Executable File Format"
Which you can locate in the msdn.microsoft.com page by going to the search box and typing that title. The first result is that document. Also you may want to check the "imagehlp" file of the msdn library. This documents provides information on the DLL standard and functions.
Good luck!...
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

I am on my second iphone 5 from verizon. I am having probelms with my phone not keping the correct time at times it runs exactly 30 minutes behind. If i reboot my phone it resets not sure what to do I am on my second phone.

On my second Iphone 5 problems I have been having is when I call out people on the other end can't hear me. Any one having this issue? My phone will not keep the right time it runs 30 minutes behind once I turn it off and it reboots thre time corrects its self. looking for help

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

Why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

I understand that your iPod nano is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Mac OS X
iPod not recognized in iTunes and Mac Desktop
MacBook and MacBook Air: iPod won't mount when connected via USB hub
What to do if your computer won't recognize a USB or FireWire device
Thanks,
Matt M.

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

try a reset.
Hold the home & power buttons down simultaneously until you see the Apple logo appear.
Note: no data will be lost.

Reminders are not keeping the date/time I set and are not reminding me.

Similar Messages

Maybe you are looking for