Reminders - how can I change the year that a task is due?

If I want to put a due date on a task, I click on it then switch "Remind Me On A Day" to On. It then sets the reminder to today's day, and the next hour.
If I want to set that date into the future, I tap on it and see four spinning "wheels" from which I can select the day/month, the hour, the minutes, and am/pm. But not the year.
If I want to change the date of a task to the same date next year, I have to spin the date wheel through 365 dates. Is there a better way?

You can go the calendar at the bottom and tap the arrow to the right to go through all of the months to get to the month that you want to set the reminder for. It's a little bit quicker than spinning the wheel.

Similar Messages

I am using a 5s under IOS 7.1.1. How can I change the year field directly when editing an existing calendar entry?

I am using a 5s under IOS 7.1.1. How can I change the year field directly when editing an existing calendar entry?

Glad that helped.
Enjoy your iPhone!

How can I change the year of an album in itunes11 without changing the years of all titles?

How can I change the year of an album in itunes11 without changing the years of all titles. For example: the reissues of an 1982 album has a 1995 bonus track, but I want it to be sorted as an '82 album? In earlier versions, when itunes sorted my album "by year", it took the year of the first title as the album's year (which makes a lot of sense). In itunes 11, however, the /highest/ year of any title in an album is taken to be the album's year. This upsets my entire catalogue. Can this be changed, will this be changed?

Highlight all of the songs,File>Get Info, change the genre

How can I change the name that my computer/iTunes assigned to my device?

When I hooked up my new 4s to my desktop, it asked if I wanted to start with a new device. I answered yes and the device was assigned a default name based on the name of the computer (which wasn't originally mine) so now iTunes recognizes the device as belonging to some dead guy I never met. Also the same first name as an ex-bf. Call me weird but this bothers me. How can I change the name of the device?

Select the device when it is connected to iTunes. Click in the device name on the summary tab. Enter what you want.
tt2

How can I change the time that fullscreen stays on?

When I am watching Netflix, the fullscreen goes back to normal mode after roughly 10 minutes. How can I change the setting so the fullscreen stays on until I turn it off?

see:
[[How to make Firefox and websites go full screen|How to make Firefox and websites go full screen]]
[[Reset Firefox preferences to troubleshoot and fix problems|Reset Firefox preferences to troubleshoot and fix problems]]

How can i change the user that open the rfc connection (sm58) from R/3?

Hi all,
i'd like to know how can i customize the user 'connecting' R/3 and BW, i mean: when i launch a data extraction a fixed user creates the rfc connection to BW (and i can see it from tcode sm58 in r/3), i need to use a different username so that it will come be more easy for me to reorganize the rfc queue in case of errors (we are doing some testing), it's possible to do something like this or everyone has to share the same user r/3 side?
I hope i've been clear...
thanks for the help
S.

Hi...
Its recommended that only one user executes the RFC because you must manage the authorizations for remote execution only with few users....in case on error you can send the user as a parameter of the RFC and you can buid the error message with this parameter and identify the user of execution...
I hope this helps you
Regards

How can i change the initials that the watch chooses for a friend ?

for most of my friends the initials chosen by the iwatch make sense, but for some, particularly chinese friends the initials are not a good chouxe. How can i set my own initials for a friend. I don't see any field for that in the iphone contacts.

There is no setting in iTunes that you can change for the location of the backup. You need to free space up on the C: drive. Whatever location you intended to put the backup at, move some of your other content. Generally pictures take up the most room. Move them from one of the libraries on the C: drive to an external drive or other media. Maybe even burn them to a CD/DVD and remove them from the computer.

How can I change the image that's shown when you mouse-over a folder?

Lightroom defaults to using the first image depending on how you sort and I can't find out how to change this. I know how to do it for stacks, but not for folders.

If you're sorting- or could leave them sorted in by file name- changing the name of the first photo will get you there. Or changing the time stamp, etc.

How can I change the name that goes with my email

When I set up my Apple account, I used my first name (John) and middle initial, so my email shows that is from John. However, everyone calls me by my middle name (Dave), so I would like to change my email to appear to come from 'Dave' rather than 'John'. Even though I sign emails, Dave, people who don't know me reply to 'John.'
I changed my account information (Apple ID Summary) to J. David, but the email was not effected. Within Mail preferences my full name is shown as John D. and is greyed out so that I can't change it.
Not the end of the world, but it's one of those things ...

Very clever, that worked! Thanks for your persistance.
I don't want to take advantage of your kindness, but I have another annoying problem involving a Thunderbolt Firware Update for my MacBook Pro,
https://discussions.apple.com/message/22358562?ac_cid=op123456#22358562
It's another one that's not a big deal, but annoying.
Thanks again.

When opening a new tab, how can I change the page that is initially displayed?

When I open a new tab, the page that is initially displayed is one that provides a simple Bing! search. What can I do to make the initial display one of my own choosing?

Select Firefox (Top left) / Options/ Options / Main or General.
There you can select the thing you whant firefox to do when it is started up. If you would like it to open www.google.com for instance, you have to paste that url (= www.google.com) into the space below.
That's it!

How can I change the order that my songs are listed in?

Hey. I am not sure what I did, but for some reason, my songs in iTunes are listed fro z-a rather than the other way around. How could I change this???

It's just a matter of clicking/toggling the little triangle at the top of the list of songs. When it points up the songs are listed in standard alphabetical order; when the triangle points down, then they will become "the other way around".
You probably just accidentally clicked the triangular toggle.

How can I change the homepage that displays when I open Firefox?

I just had to reinstall a program that had become corrupted, and somehow the process changed my Firefox homepage. Not only is the new one not what I want, when I try to open Firefox I get a notification from WOT that the new page is unsafe.
I do one open Firefox window. I would like to use it to change my default homepage back to the one I had, but I can't find how to do that.

https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page

How can i change the method that get a Bitmap file and return 15 new Bitmaps so the new Bitmaps will be also PixelFormat Format8bppIndexed ?

This is the method:
public static Bitmap[] get_images_with_clouds(Bitmap radar_image)
int e = 0;
int f = 0;
int image_clock_area_x = 0;
int image_clock_area_y = 0;
int image_clock_area_x1 = 140;
int image_clock_area_y1 = 21;
Bitmap[] localImages;
localImages = new Bitmap[15];
Bitmap image;
image = new Bitmap(Properties.Resources.radar_without_clouds);
BitmapData bmD = null;
BitmapData bmD2 = null;
try
bmD = image.LockBits(new Rectangle(0, 0, image.Width, image.Height), ImageLockMode.ReadWrite, PixelFormat.Format32bppArgb);
bmD2 = radar_image.LockBits(new Rectangle(0, 0, radar_image.Width, radar_image.Height), ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb);
IntPtr sc0 = bmD.Scan0;
unsafe
int* p = (int*)sc0.ToPointer();
int* p2 = (int*)bmD2.Scan0.ToPointer();
for (e = image_clock_area_x; e < image_clock_area_x + image_clock_area_x1; e++)
for (f = image_clock_area_y; f < image_clock_area_y + image_clock_area_y1; f++)
Color clock_color = Color.FromArgb(p2[e + f * bmD2.Width]);
p[e + f * bmD.Width] = clock_color.ToArgb();
image.UnlockBits(bmD);
radar_image.UnlockBits(bmD2);
catch
try
image.UnlockBits(bmD);
catch
try
radar_image.UnlockBits(bmD2);
catch
int c;
for (c = 0; c < localImages.Length; c++)
localImages[c] = new Bitmap(image);
Bitmap new_image = new Bitmap(Properties.Resources.radar_without_clouds);
Bitmap new_image1 = new Bitmap(Properties.Resources.radar_without_clouds);
Bitmap localbmptest = black_and_white(new_image, radar_image);
Image image1 = black_and_white(new_image, radar_image);
image1.Save(@"c:\temp\testclouds666.jpg");
Bitmap clouds = new Bitmap(image1);
int x;
int y;
int a;
int b;
int d = 0;
Bitmap redImage;
redImage = new Bitmap(512, 512);
using (Graphics g = Graphics.FromImage(redImage))
g.InterpolationMode = System.Drawing.Drawing2D.InterpolationMode.NearestNeighbor;
g.PixelOffsetMode = System.Drawing.Drawing2D.PixelOffsetMode.Half;
g.Clear(Color.Red);
BitmapData bmData = null;
BitmapData bmData2 = null;
BitmapData bmDataArray = null;
try
bmData = clouds.LockBits(new Rectangle(0, 0, clouds.Width, clouds.Height), ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb);
bmData2 = radar_image.LockBits(new Rectangle(0, 0, radar_image.Width, radar_image.Height), ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb);
IntPtr scan0 = bmData.Scan0;
IntPtr scan02 = bmData2.Scan0;
unsafe
int* p = (int*)scan0.ToPointer();
int* p2 = (int*)scan02.ToPointer();
double h, mm;
for (d = 0; d < localImages.Length; d++)
bmDataArray = localImages[d].LockBits(new Rectangle(0, 0, localImages[d].Width, localImages[d].Height), ImageLockMode.ReadWrite, PixelFormat.Format32bppArgb);
IntPtr scan0Array = bmDataArray.Scan0;
int* pArray = (int*)scan0Array.ToPointer();
for (a = 0; a < new_image.Width; a++)
for (b = 0; b < new_image.Height; b++)
Color color1 = Color.FromArgb(p[a + b * bmData.Width]);
Color color2 = Color.FromArgb(p2[a + b * bmData2.Width]);
if (color1.R != 0 || color1.G != 0 || color1.B != 0)
h = color2.GetHue();
mm = RadarAnalysis.Hue2MMPerHour(h);
if (mm >= treshhold_array[14 - d])
pArray[a + b * bmDataArray.Width] = color2.ToArgb();
localImages[d].UnlockBits(bmDataArray);
clouds.UnlockBits(bmData);
radar_image.UnlockBits(bmData2);
catch (Exception error)
try
clouds.UnlockBits(bmData);
catch
try
radar_image.UnlockBits(bmData2);
catch
try
localImages[d].UnlockBits(bmDataArray);
catch
Logger.Write("Error Exception ==> " + error);
MessageBox.Show("Error Exception ==> " + error);
return localImages;
In the end i'm getting 15 Bitmaps in localImages.
localImages is Bitmap[]
The method get a Bitmap and the Bitmap pixel format is: Format8bppIndexed
I want that in the end the 15 Bitmaps in localImages will be also pixel format of Format8bppIndexed.
The problem is that if i change everywhere in the method from: PixelFormat.Format32bppArgb to PixelFormat.Format8bppIndexed
I'm getting exception on the line:
pArray[a + b * bmDataArray.Width] = color2.ToArgb();
Attempted to read or write protected memory. This is often an indication that other memory is corrupt
System.AccessViolationException was unhandled
HResult=-2147467261
Message=Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Source=My Weather Station
StackTrace:
at mws.ImagesComparison.get_images_with_clouds(Bitmap radar_image) in d:\C-Sharp\Download File\Downloading-File-Project-Version-012\Downloading File\ImagesComparison.cs:line 469
at mws.ScanningClouds.backgroundWorker1_DoWork(Object sender, DoWorkEventArgs e) in d:\C-Sharp\Download File\Downloading-File-Project-Version-012\Downloading File\ScanningClouds.cs:line 695
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback()
InnerException:
Line 469 is: pArray[a + b * bmDataArray.Width] = color2.ToArgb();

Thorsten Hi,
Too complicated for me i will try to look on it.
Also if you will have time later maybe you could look at it too ?
For now what i tried was to get the returned 15 new Bitmaps to a local array:
bitmaps = ImagesComparison.get_images_with_clouds(b1);
for (int i = 0; i < bitmaps.Length; i++)
ConvertTo1or8Bit.ColorToGrayscale(bitmaps[i]);
break;
Then make a convertion with a new class trying to convert the Bitmaps to 8 bit in the memory without saving them first to the hard disk. This is the new class:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Drawing.Imaging;
using System.Drawing;
using System.IO;
namespace mws
class ConvertTo1or8Bit
public ConvertTo1or8Bit()
public static Bitmap ColorToGrayscale(Bitmap bmp)
int w = bmp.Width,
h = bmp.Height,
r, ic, oc, bmpStride, outputStride, bytesPerPixel;
PixelFormat pfIn = bmp.PixelFormat;
ColorPalette palette;
Bitmap output;
BitmapData bmpData, outputData;
//Create the new bitmap
output = new Bitmap(w, h, PixelFormat.Format8bppIndexed);
//Build a grayscale color Palette
palette = output.Palette;
for (int i = 0; i < 256; i++)
Color tmp = Color.FromArgb(255, i, i, i);
palette.Entries[i] = Color.FromArgb(255, i, i, i);
output.Palette = palette;
//No need to convert formats if already in 8 bit
if (pfIn == PixelFormat.Format8bppIndexed)
output = (Bitmap)bmp.Clone();
//Make sure the palette is a grayscale palette and not some other
//8-bit indexed palette
output.Palette = palette;
return output;
//Get the number of bytes per pixel
switch (pfIn)
case PixelFormat.Format24bppRgb: bytesPerPixel = 3; break;
case PixelFormat.Format32bppArgb: bytesPerPixel = 4; break;
case PixelFormat.Format32bppRgb: bytesPerPixel = 4; break;
default: throw new InvalidOperationException("Image format not supported");
//Lock the images
bmpData = bmp.LockBits(new Rectangle(0, 0, w, h), ImageLockMode.ReadOnly,
pfIn);
outputData = output.LockBits(new Rectangle(0, 0, w, h), ImageLockMode.WriteOnly,
PixelFormat.Format8bppIndexed);
bmpStride = bmpData.Stride;
outputStride = outputData.Stride;
//Traverse each pixel of the image
unsafe
byte* bmpPtr = (byte*)bmpData.Scan0.ToPointer(),
outputPtr = (byte*)outputData.Scan0.ToPointer();
if (bytesPerPixel == 3)
//Convert the pixel to it's luminance using the formula:
// L = .299*R + .587*G + .114*B
//Note that ic is the input column and oc is the output column
for (r = 0; r < h; r++)
for (ic = oc = 0; oc < w; ic += 3, ++oc)
outputPtr[r * outputStride + oc] = (byte)(int)
(0.299f * bmpPtr[r * bmpStride + ic] +
0.587f * bmpPtr[r * bmpStride + ic + 1] +
0.114f * bmpPtr[r * bmpStride + ic + 2]);
else //bytesPerPixel == 4
//Convert the pixel to it's luminance using the formula:
// L = alpha * (.299*R + .587*G + .114*B)
//Note that ic is the input column and oc is the output column
for (r = 0; r < h; r++)
for (ic = oc = 0; oc < w; ic += 4, ++oc)
outputPtr[r * outputStride + oc] = (byte)(int)
((bmpPtr[r * bmpStride + ic] / 255.0f) *
(0.299f * bmpPtr[r * bmpStride + ic + 1] +
0.587f * bmpPtr[r * bmpStride + ic + 2] +
0.114f * bmpPtr[r * bmpStride + ic + 3]));
//Unlock the images
bmp.UnlockBits(bmpData);
output.UnlockBits(outputData);
return output;
But they are still 32 bit. So i guess i didn't realy understand yet how to do it.

How can I change the fact that every time I open firefox, I get redirected to a website promising a free ibook?

OK. So in October I made the mistake of opening a website offering a free iBook (I'm really not gullible; I thought I could figure out who was sending it too me). Ever since then, I cannot open a new Firefox session without being redirected to the site (If I open up more than one webpage and save them before closing, I don't get redirected to the ibook site).
I actually keep my web-surfing software on thumb drives, and I tried two different thumb drives doesn't matter. I purchased and ran an anti-virus program. No dice. Can you help me?
I have a MacBook, which runs on system OSX 10.5.8

Hi revbennyd,
So it sounds like your home page has been hijacked? You should take a look at the Knowledge Base article [[How to set the home page]].
There are steps in that article to reset your homepage preferences to default. I would try that first to clear out any strangeness. If that works, you can try setting your homepage again to your personal preference.
If that doesn't work you should look at the article [[Preferences are not saved]].
Finally, your issue may be because you've been hit with some [https://support.mozilla.org/en-US/kb/Is%20my%20Firefox%20problem%20a%20result%20of%20malware?s=malware&r=0&e=sph&as=s#w_how-do-i-get-rid-of-malware Malware].
Hopefully this helps!

How can I change the app that a .pdf attachment opens in on the fly w/o using Preference Pane?

I have the need to open some .pdf attachments in firefox (24) and some in Skim, pdf reader. I understand that the opening is set in the Preferences Pane. Is there a way or add on that will allow this on the fly ? Or place the option in the attachments dropdown menu on the attachments bar ? It would greatly speed things up.

You can select 'Always Ask' as action in preferences when opening a pdf attachment. So you'll be prompted every time and can choose which application to use.

Reminders - how can I change the year that a task is due?

Similar Messages

Maybe you are looking for