Reminders won't stay in date view

Ever since upgrading to 10.8.2, Reminders refuses to stay in date view. I can select reminders for a particular day on the calendar, as I could previously, but then it very quickly and spontaneously reverts to list view (which is in itself useless, as you can't sort by date there), even if I'm in the middle of modifying a reminder. I suspect iCloud syncing triggers list view.
Any thoughts?

My wife and I have the same problem. Our temporary solution is to Turn Wi-Fi Off (assuming you're on a computer that only connects to the internet over Wi-Fi) while making any significant changes to the Reminders.
It appears as though we're constantly being interupted (date window and name field closing) because it's trying to sync in the middle of typing and my wife types fast and she can't beat it.
This is definantly an Apple problem that needs to be resolved.

Similar Messages

Reminders won't stay set, say null or disappear

I am unable to get reminder app to work right anymore. As soon as I set a reminder the time date set either disappear or say (null) immediately. I have followed suggestions I have read on here and tried many things I hoped would work. Is anyone else still having this problem, I welcome any suggestions new or old, at this point I will try anything. (I have tried with and without icloud turned on), it does it either way. Thanks in advance for any replies.

it keeps reverting back to New York time and won't stay on eastern time
ahh..... New York is in the Eastern Time Zone so they ARE the same!

Applications Folder won't stay in Icon View

In the Applications Folder I want to have my icons arranged in a certain way at a certain size and always open in that view, but they never stay that way after I switch my mac back on.
I have tried everything:
1. Ticking "Always open in icon view". The tick is always gone next time I switch my mac back on. In all other sidebar folders this tick remains so I always get the view I want, along with icon order and icon view which is OK for other folders - but not Application Folder. It always opens in List View so when I change it to icon view, my icon sizes and order are back to default.
2. Arrange by "Snap to grid" - still opens in List View.
3. Tried "Set as default" in icon view - still opens in List View.
4. Deleted DS Store in Application Folder, as advised elsewhere, and setting it up again with "Always open in icon view". Still opens up again in List View.
5. Deleted "com.apple.finder.plist", as advised elsewhere, and set everything up again, but still opens in List View next time I start up my mac.
Why does the tick in "Always open in icon view" keep disappearing for my Applications Folder next time I start up?
How can I have this folder always open in icon view?
Something is not right somewhere but I don't know how to make it right.

Yes, I have done everything as you've outlined. It has worked as it should for all other Finder/Sidebar folders - Documents, Downloads etc, whether permanently list view, icon view etc.
I also set up the Applications Folder the way I want it, tick the "Always open in icon view" box, then the next time I switch on the tick is gone and it's opened in list view. All other Sidebar folders are fine, and still have the box ticked.
It's just the Applications Folder - something seems to be wrong somewhere and it's not anything I've done, or not done as it works with the other folders.

Reminders Info Window Won't Stay Open

Reminder info (location, date, time) won't stay open long enough for me to input location. Winndow fades away before it can search for a location i.e. trying to input Airport but fades before I can enter airport name.

I have given up. Sometimes it takes me 4 or 5 times to open the window before I can complete my short entry. I think it definetely has to do with syncing and iCloud. I wish there was a way to setup the frequency of syncs or something.
I have resorted to using notes. It syncs with iCloud, but doesn't seem to show the same quirky behavior
Reminders is SO frustrating to use on any level. It is half baked IMO, this issue, can't sort the lists, can't do a delete all for completed items.

Show date and time in menu bar won't stay selected

Using 10.6.7 with all updates as of the time I am writing this.
Show date and time in menu bar is unselected and unselectable. When I select it (click it) it will unselect itself. I will see the checkmark for 1/2 a second, but won't stay selected.
I've reparied permissions in the Disk Utility as described by a similar post (on an older version of the OS) with no luck.
At a little bit of a loss. Spending the mandatory 30 minutes with various forms of Google searches with no luck.
Looking for new ideas other than an OS restore.
David

Looking for new ideas other than an OS restore.
Restart?

HT4203 My data and 3G won't stay off. It comes bak on almost instantly.

I try to shut data and 3G off to save battery but now it won't stay off. It turns bak on in a matter of seconds. What is wrong

This ***** because I like to listen to music while I work. It passes the time. Without turning 3G and data off the battery drains super fast.

My iPad2 won't stay in the horizontal view position

My iPad2 won't stay in the horizontal view position. I have it unlocked so I believe it should switch between views as I move it. Before I make a trip to the Apple store I want to make sure it's not user error!

Unlocked allows the screen to rotate as you rotate the device. Locked is supposed to keep the screen fixed in one orientation. However the function of the switch on the side can be swapped between orientation lock and mute, so it might not be perfoming the job you expect it to. Check Settings > General > Side Switch.
tt2

The view options won't stay?

I've used Mac OS for a very long time now and am at the least an intermediate user both in hardware and software but this is perplexing. For whatever reason, whenever a Finder window is opened (disk image just mounted, clicked the Finder icon, opened my documents) it always opens in Column View, even if I already set the folder to icon view. It doesn't seem to be saving the .DS_store file correctly or something, because if I close the window and open it again, it resets to column view. Every once in a while it will stay in icon view but it's rare.

DBAqua----
Whoa!
http://hints.macworld.com/article.php?story=20050217012732914
"....[robg adds: I would also recommend opening NetInfo Manager again and using Security: Disable Root User (after authenticating again) to disable root.]...."
Since I got in trouble jumping in before I really knew what I was doing, tell me the difference between "Root User" and the one that locks the files so you
can't access them from Disk Utility.
I'm putting this in my "ToDo" file for a future time when I'm tuning/cleaning my
files. Right now I have a work in progress.
Thanks again DB, my indebtedness is compounding daily.
...........goldie

How to get rid of the "mil" in Data View's large Display meter

Hi, there! I have two analog voltage inputs that I am having signal express V2.5 to collect data on. The first input is scaled to inches while the second input is scaled to pounds. For some reason, as i bring up the large display in Data View, the meter will show this "mil" thing. It won't go away until the scale reaches 1.0000. For instance, if the scaled signal is less than 1.0000, it will indicate 900mil, 800mil, 50mil 1mil, and so on..... This really created alot of confusion for my lab.
I am hoping if you guys can tell me a way to make 900mil to become 0.900, 50mil to 0.050, and 1mil to 0.001
Thanks in advance!
Kin

Hi Kin,
Sorry about this. I don't believe there is a way for you to change this in SignalExpress 2.5. However we did add this ability in SignalExpress 3.0. Most displays now have a property page, including the Large Display, which allows you to specify the format and precision shown, including to remove the SI notation. By right-clicking on the Large Display and select Properties, go to the Format & Precision tab, and select the Floating Point option (instead of SI notation).
Again, I'm sorry to say that this option is only available in SignalExpress 3.0+.
Phil

IPod Nano won't stay mounted

Hi this is my first post and hope someone can help. My problem is that when I attach my nano to my computer it will mount on the desktop, open iTunes check and see that it is update, which it is and then it umounts from the desktop within a few seconds. It remains in the iTunes window so I can access the nano preferences but then when I hit apply it searches for the nano and since it is not on the desktop says it can not find it. The iPod is not in the finder window but shows up in the system profiler as being attached to the USB. I am up to date on iTunes and the nano updater says it is up to date running 2006-06-28. I have tried everything such as restarting, using different USB ports, etc... to no avail. When I run the updater it stays mounted on the desktop but I can not acces the preferences. I really need to change my nano preferences as it will not update my new playlists because prefs, are set to update only the checked ones and I can not changes this and apply it if the nano won't stay mounted. Can anyone help? Much thanks

This happened to me when using iTunes 6. Is that the version you are using? I was never able to find a complete answer to the "Preferences not saved" error or any knowledge base articles with an official explanation. I did however find a workaround in a previous discussion. Connect your iPod and in the short time that it is still visible on the desktop just as iTunes is opening, go to Preferences>iPod and tick "enable disk use". You have to be quick but it can be done. Once it is enabled you will be able to go back and update the preferences such as manual update etc. and and you'll not get the error.
If you are using iTunes 7 try the same technique only tick "enable disk use" in the Summary tab before your iPod unmounts.

When I boot up my Mac, Messages opens automatically. I quit the app, but it just re-opens itself. It won't stay off!!! I can't figure out what's wrong with it!

For the past few months, my Mac has been acting weird. EVERY time I boot up the computer, Messages opens automaticallly (I am runing OS X 10.8.x). I quit the app, but it just re-opens a few seconds later! It just won't stay off! I've looked it up online and nothing helps. I have no idea what to do!!!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Live View CS4 vs Live Data View CS3

In DW CS3 I was able to edit php pages in Design View with
Live Data View turned on. Without it the page did not display
properly. This made life easy adding content to clients web pages
(the main stay of maintaining web sites).
With DW CS4 this functionality appears to have been removed
or perhaps I just cannot work out how to get it.
Adding lots of content in code view is a pain - can anyone
tell me if and why this has changed and has DW become a tool for
fanciful coding at the cost of being the workhorse it used to
be?

aenh agn zfnst wrote:
> In DW CS3 I was able to edit php pages in Design View
with Live Data View
> turned on. Without it the page did not display properly.
This made life easy
> adding content to clients web pages (the main stay of
maintaining web sites).
>
> With DW CS4 this functionality appears to have been
removed or perhaps I just
> cannot work out how to get it.
To access Live Data view in CS4, select View > Live Data
or use the
keyboard shortcut, Ctrl+Shift+R/Shift+Cmd+R.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Won't stay at 1:1 mag

In the Library and Develop modules, when I click on an image to magnify it to 1:1, the image expands to 1:1 and then immediately returns back to fit/fill (depending on what the setting was before). Clicking on 1:1 magnification in the Navigator works fine as well as using the CMD + shortcut; the image expands to 1:1 and stays at 1:1 magnification. I am running LR 4.1 on Mountian Lion on a MBP. I tested in other programs and had no problems. Any thoughts out there? It is really frustrating.
Brian

I always thought that's by design.
Click-hold-release, as opposed to a normal (fast) click, zooms in and out,
just like click-and-drag.
I have no problems single-clicking reliably on my machine.
2012/7/31 Ian Lyons <[email protected]>
Re: Won't stay at 1:1 mag
created by Ian Lyons <http://forums.adobe.com/people/Ian+Lyons> in *Photoshop
Lightroom* - View the full discussion<http://forums.adobe.com/message/4589842#4589842

IPod won't stay mounted to computer, can't load any content

I've reset it, tried to repair it with disk utility, and it still won't stay mounted. Can't put any content on it.
iPod classic 160 GB
Mid-2010 MacBook Pro running 10.8.5
iTunes 11.1

Koopie, the bad news is: that's not at all an uncommon problem with the iPod Touch. I have the same problem at work. We have no problems at all connecting to our Wi-Fi with Dell, Sony, HP, Asus, Palm or any other devices except two: my Touch and my boss's iPhone. Apple has the most finicky Wi-Fi known to man.
But enough ranting. The first thing you'll want to do is to check to be sure that your router's firmware is up-to-date. That may just solve your problem; it does in some cases. I've also found that turning the Touch's Wi-Fi off and on sometimes helps. You may have to do it four or five times to get a reconnect. You might also check your router's instructions to see if there is a way to reset it by going in through your web browser, which may be more convenient than pulling the plug.

No data in AWM Data Viewer

Hi all,
I am using Oracle 10G AWM for reporting purpose. I have created all required dimensions, measures. But when i view the data after maintaining it, it won't show any data but a blank Data Viewer. When I do view data for the respective dimensions, it shows me data as meant to. Could you please suggest what could be the reason for this?
I am on 10gR2, AWM 10.2.0.2.0A.
Thanks,
gtcol

Hi,
Have you checked the log for the build and verified that all your rows have been loaded?
If you maintain the cube in the AWM session this log should appear at the end of maintenance job. If you submit it to the oracle queue you should check out the xml_load_log table in the olapsys schema for the same log.
It might be that all your fact rows are rejected due to the fact that it can't find a reference to one or more dimensions.
Ragnar

Reminders won't stay in date view

Similar Messages

Maybe you are looking for