Remittance challan in ECC 6.0
Dear All,
In ECC 6.0, there is a problom in printing Rimittance challan, when i am trying to create Business place, it takes me to create Section code, eventhough i created business place in Cross-apllication comphonent, but still there is a problom in printing remittance challan.. Pls let me know the way...
Regards,
Suresh Patipati.
hiii.
In ECC 6.0 you have to define Section Code only & the business place can be defined in spro-tax on sale & purchase-basic setting-south korea-business place-define business place.
hope this will help u.
Regards,
Aakash
Similar Messages
-
Edcess & Hcess amount not updated in Remittance challan document (Vendor)
Hi Gurus,
I am working on ECC 6.0. Should any body tell me how can i get the ed-cess & higher cess amount in remittance challan document? i have got the Basis TDS & surcharge remitted amount on remittance challan but not get the edcess & higher cess remitted amount? also this is not reflected the ed cess & h cess amount in vendor TDS certificate?
for this i have done the vendor invoice. during this i got the TDS amount by bifurcate. i also maintain seprate GL for TDS Deducion. then after i create remittance challan. but it couldnot shown me in the line item of ed-cess remitted.
Please help me to work out on this problem.
Warm Regards,
Dhananjay R.Hai
1. If you have separate tax codes for Surcharges, J_1IEWT_SURC table
should be maintained, by setting the checkbox checked, for the company
code. Those tax codes should be available the J_1IEWTSURC table
(use SM30 to maintain these values)
2. If you have a combined tax code for surcharges, then the tax rates
should be maintained in J_1IEWT_SURC1 table.
Make sure that tax codes available in J_1IEWT_SURC1 table are not
available in J_1IEWTSURC table and vice-versa.
3. If you are using separate tax codes for Education cess, those tax
codes should be maintained in the J_1IEWTECESS table and 'X' should be
maintained for the company code in J_1IEWT_ECFLAG table.
4. If you are using combined tax codes for Education cess, tax rates
should be maintained in J_1IEWT_ECESS1 table.
Make sure that the tax codes available in J_1IEWT_ECESS1 table are not
maintained in J_1IEWTECESS table and vice-versa.
Refer (only refer) the solution part of the note 870991 and 853918
for details relating to table creation.
Make sure that in the table for surcharge you have only the tax types
relevant for surcharge AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND CESS ANDMake sure that in the table for ECESS you have only the tax types
relevant for ECESS AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND SURCHARGE
If you have configured secondary cess seperately,i.e a seperate tax
type and code for secondary cess,kindly make sure that you have
applied the steps and the code corrections given in the note 1097621.
Regards -
Error while doing Remittance Challans (Withholding Tax)
Hi all,
I am working on ECC 6.0
while i am doing Remittance Challans wiht T.Cpd: J1INCHLN the following error is comming:
" Number group not maintained for CO code 1102 section IEQ1102 and business place 194C"
can any one please give solutin to solve this
Thakning youyou need to maintain the detials in tabel J_1IEWTNUMGR_1.
Use SM30 and give this table and say maintain values.
reward if useful
sarma -
Problem in Creation of Remittance Challan
Hi sap Gurus,
I have problem whne i am Creating a Remittace challan For With holding Tax its giving a error message no.8I705,
No.key not found.
Can any one Please Help me.
Thanks in advance.
Regards
bharathHello Bharat,
For remittance challans first you need to define no group & no ranges.
- Maintain No groups
- Maintain No ranges
- Assign no ranges to no groups
Please maintain the above settings, it will solve your problem. Try this if u have any querry pl revert, If useful pl assign points
Thanks
Para -
Error While Creating Remittance Challan
Dear All
I have made down payment to a Vendor of Rs. 10,000 .TDS @11.33 was deducted on the Down Payment. Then he raised an invoice of Rs. 100,000. Again TDS was deducted on the Rs. 90,000 balance amount.
Now when I am Cretaing Remittance Challan for him I am getting the following error.''
No unpaid tax lines exist for the given selection criteria.Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
Thanks and Regards
KanwaljitThe following may be the one of the cause please check all.
1. Check section code & Bussuniss place at document level in BSEG. if the section code is not updated at document level u can not update the section code and bussiness place for Direct FI invoices from J1INPP as it is meant only for MM invoices. u has to reverse the invoice and repost it. or else develop a BDC/program/query which can update the section code.
2. Check the repient type at vendor master, and also check wheather the recipent type was changed after posting document it ussullay occurs. the possible solution is again the same reverse the document and repost it.
Check these two things first and let me know it the problem still persists.
Thanks & Regards
Krishna Chaitanya -
Error while posting remittance challan
Hi
At the time of saving the remittance challan, I am facing the following error.
"Ex.rate diff.accts are incomplete for account 0000477002 currency INR"
What is the solution for this??
Thanks in advance
DhanashreeHi
Pls check the exchange rate difference GL assignment and also the tolerance limits set for exchange rates differences. The most probable error is that you have not defined the account for posting the differences,
Assign points if the same is useful to you
Regards
Sanil Bhandari -
Error in Creating Remittance Challan -TDS
Hi,
I have Created PO and Invoice of the same of Rs 52,500/- out which Rs 1,176/- is Withholding Tax (TDS) payable. So when I go to J1INCHLN Tcode to create Remittance Challan fill the relavant details and execute it ask me Choose Selection Creation, those are Document number , Reference, Payment Order. So I select the document number and click ok. After that it shows me error saying, "There are no open Items managed in account 13113940."
Where as in T-Code FAGLL03 its shows me in open Items.
Can some one guide me why is it so happening. Or is there something missing.
Also how TDS cretificates is done and TDS payment is done
Points will be awarded.
Regards,
ArvindHi,
Check you GL account in FS00 > Control Data, whether Open item managed check box is checked.. if not tick it and do the transactions once again.
After bank challan you have to do challan updation by using T Code J1INBANK. After that you can run the TDS certificates by using T Code J1INCERT.
Hope it helps
Saravanan.A
Assign Points if it is useful. -
Withholding Taxes - NON CREATION OF REMITTANCE CHALLAN
Hi,
TDS remittance challan is not getting created. The following error is thrown:-
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
I have applied the following SAP NOTES 1358294, 962858, and 370163
I am stuck with this issue for the past few days.
Can someone guide me on this forum? This is very critical.
Regards,
V RajeshwariChintan,
I have taken care of all the inputs. Any other things to be looked into?
Regards,
V Rajeshwari -
Tax Remittance Challan Creation
Hi,
while creating the remittance challan the error is coming as follows
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
but when going through the particular table the data is properly displaying.HI, Dutta,
For Error 8i702 reasons are below.
1. park and posted the docment . then remove the V from with_item table Satus field.
2. In document Bp/SC is there or not for tax lines ?
3. check Miro - Inv reduction functionality is use ?
Please give me your contact no ?
Reg
Madhu M -
All value not showing at the time of J1INCHLC - Create Remittance Challan
Hi,
I am facing following problem in TCS
I am trying to process TCS Remittance Challan with T.code J1INCHLC, but all document No. not showing at the time of challan process, I checked entry in TCS GL, Table BSEG & WITH_ITEM all document showing properly. Section code also showing in line item.
I checked some document process with same material & same customer. But only few entries showing at the time of TCS Remittance Challan process. I also compare both entries which is showing & un-showing but no difference found.
Kindly suggest solution to resolve the issue.
SunilHi Sunil
If the entires are there in WITH_ITEM and with Section codes, then it should appear in J1INCHLC. Please check other things like the date ranges you are entering in J1INCHLC. Also try by putting the document number which is missing instead of posting date range and fine out whether is it appearing. If you are able to get it, then you would be in a position to find out why it is not appearing.
Regards
Prasanna -
Extended Withholding Tax Remittance challan
Hi,
I am unable to generate remittance challan for ext WHT. Can anyone tell me the steps for configuring the same.
I would also like to know the process flow of remittance challan and then bank challan and the reflection of the same in reports. I would like to know what are the steps to be followed soon after deduction of tds from vendor invoice in FB60.
Thanks in adv.
nullHI,
1. Payment to Income Tax Authorities
1) TCODE: J1INCHLN
2) COMPANY CODE: 3100
3) FISCAL YEAR 2007
4) BUSINESS PLACE/SECTION CODE: ENTER YOUR LOCATION CODE EG:3100
5) POSTING DATE: FROM & TO DATE FOR EG FOR MONTH OF APRIL WRITE DOWN 010403 TO 30042007
6) SECTION : 194C FOR CONTRACTORS AND 194J FOR PROFESSIONALS
7) RECIEPIENT TYPE: PUT CO TO OT
8) DOCUMENT DATE: ENTER DATE
9) BANK ACCOUNT : BANK A/C
10) CLICK ON THE CLOCK
11) CLICK ON DOCUMENT NUMBER.
12) ENTER
13) SEE THE TOTAL TDS AMOUNT LIABILITY
14) CLICK ON GREEN ARROW
15) DOUBLE CLICK ON RS. 1
16) CHANGE THE AMOUNT RS. 1 TO TDS LIABILITY AMOUNT.
17) TEXT: ANY INFORMATION.
18) SIMULATE>SAVE.
NOTE DOWN DOCUMENT NO. AND CHALLAN NO.
STEP2 BANK CHALLAN UPDATION
THIS STEP IS TO BE DONE AFTER PAYMENT HAS BEEN MADE TO THE AUTHORITIES AND THEY HAVE GIVEN A CHALLAN NUMBER. IF NO NUMBER HAS BEEN GIVEN PLEASE USE A SEQUENTIAL NUMBER.
1) TCODE: J1INBANK
2) COMPANY CODE : 3100
3) FISCAL YEAR :2007
4) CHALLAN CLEARING NUMBER: SELECT THE NUMBER OF DOCUMENT THAT WAS GENRATED PREVIOUSLY GENERATED THROUGH T.CODE J1INCHLN
5) BANK CHALLAN NUMBER: IF SOME NUMBER HAS BEEN GIVEN BY THE BANK FINE ELSE PUT ENTER YOUR LOCATION CODE EG: 3100/2007/01
6) BANK CHALLAN DATE: PUT THE DATE ON WHICH IT WAS DEPOSITED IN THE BANK
7) BANK KEY: ENTER YOUR HOUSE BANK OF WITHDRAWAL ACCOUNT XX123
8) CLICK ON THE CLOCK
9) MESSAGE COMES BANK CHALLAN UPDATED.
STEP 3 PRINTING WITHOLDING TAX CERTIFICATE
1) TCODE: J1INCERT
2) COMPANY CODE : 3100
3) FISCAL YEAR :2007
4) BUSINESS PLACE(ZSECCO): ENTER YOUR LOCATION CODE EG: 3100
5) SECTION : 194C FOR CONTRACTORS AND 194J FOR PROFESSIONALS
6) POSTING DATE: DATES FOR WHICH CERTIFCATE HAS TO BE ISSUED FOR EG 010403 TO 300403 FOR MONTH OF APRIL
7) BANK CHALLAN DATE: PUT THE SAME DATE AS BANK CHALLAN DATE I.E ON WHICH YOU HAD MADE THE TDS PAYMENT.
8) VENDOR: ENTER VENDOR CODE WHOM YOU WANT TO PRINT THE CERTIFICATE
9) CERTIFCATE DATE: DATE OF ISSUANCE OF CERTIFICATE
10) SIGNATORY:PERSON SIGNING THE DOCUMENT
11) DESIGNATION: DESIGNATION OF PERSON SIGNING THE DOCUMENT
12) PLACE OF PRINTING: PUNJAB OR AHEMDABAD SO
13) CLICK ON THE CLOCK
14) CLICK ON PRINT IMMEDIATELY
15) CLICK ON PRINT ICON. -
In Withholding Tax, Amount is not appearing in Remittance Challan
Hi,
I have done WHT configuration in Implementation project, This is my 1st Project and I am new in SAP, I am facing following 2 Problems
1) Remittance Challan is getting prepared.but amount is not showing in the remittance challan, all the process till Certificate is happening smoothly. Please advice, where my settings went wrong or If I missed something in the configuration?
2) Please also guide or tell me the steps for configuring E-TDS filing.
Again requesting to kindly provide the solution.
Thanks
Regards
SunilYour Qn. No.1 is answered in the following thread.
Re: WHT Error while J1INCHLN ? -
Output error of Remittance Challan (T. Code J1INCHLN )
TDS Remittance Challan u2026..Due to change in tax, ( from separate tax to combined tax), we had to change setting in SM30 table name J_11EWT_SURC ( the check box check removed ).
For new entries, output of Remittance Challan (T. Code J1INCHLN ) shows the values correctly. But for old entries it does not update the same in output of Remittance Challan. It still shows value as zero only.
There are around 400 entries gone in to system before change in above table. It would not be possible to reverse all entries.
How do we go about this?Have u got the solution?
Pls let me know.... -
Create a remittance challan.
when i am trying to create a remittance challan forwithholding tax 194j under j1inchln in the new fiscal year dt 23.04.2010 I am getting the follg message. can anybody guide me to create a remittance challan.
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.when my client is trying to make MIRO posting under a particular GL A/C 523810 which is indirect expenses (insurance) that does not attract any tax, it is not allowing to post the invoice & throwing an error message that 523810 GL A/C has been set not for relevant tax. This is happening even when giving a tax code V0 which is 0% tax.
-
J1INCHLN - Create Remittance Challan
At the time of posting J1INCHLN - Create Remittance Challan
Following error i m getting
Number key not found
Message no. 8I705
Plz give me the sollution.
I am new to Withholding tax.Hello,
You may find the following note informative.
Note 1332531 - Form 17/Challan Legal changes - 2009
Regards,
Ravi
Maybe you are looking for
-
After upgrade to Apex 4.2.1, login to old workspace results in 404
I have made an upgrade to Apex 4.2.1 from Apex 4.1 runtime. (Upgrade completed successfully no errors encountered.) I had an installed app which I cannot use now. Login to apex_admin is possible, so I've created developer users in the existing worksp
-
How do I get Quicken data back for our non-profit
It is the end of the fiscal year and tax time. Quicken is gone. My personal financial information for 7 years is not accessible, nor our non-profit. What can we do?
-
Can we specify limit on the number of records to be fetched?
Can we specify limit on the number of records to be fetched from the database? I have millions of records in my DB and I want to fetch say some 50,000 latest records to optimize the performance of reports. Is it possible in any version of Crystal Rep
-
PSE9: Suddenly getting error when processing mutliple RAW files
I am usine PSE9 and went to process multiple RAW files today like I have done numerous times in the past. However, suddenly today even though the settings are still set for MAX JPEG I am getting promted to save each file as a PhotoShop file. Then a
-
COM Surrogate stops working When printing in Internet Explorer 10
Some info about the setup Virtual Server WIndows server 2008 R2 Standard Terminal server 64 Bit Internet Explorer 10.0.9200.16618 Problem detail from Reliability Monitor i.imgur.com/fN1yFxA The problem only occurs for some users, other users on the t