Remodelling job goes in canceled state

Dear experts,
I'm trying to remodelate a Cube in DEV, but the process (seen via SM37) goes canceled state as soon it started.
I suceeded to remodelate some time ago but now seems to be a different story .. The system is BW 7.01.
Thanks,
M

Hi,
During remodeling time is any loads are loading to your target?
Can you check at your target level and see is there any failed request at info cube level?
Remodeling means your going to add or delete char or key fig.
Can we know what your doing mean adding or deleting?
if your adding info object, what about history data for added info object?
if you need historic data then you can delete the whole data from cube, without remodeling also you can directly add info object into cube and later  you can activate whole data flow.
You need to maintain proper transformations or routine to fill  added info object.
Thanks

Similar Messages

  • SharePoint 2013 Workflow goes into cancelled state

    I want to test a workflow that copys current list item to a new libary. But as soon as
    it starts it goes into cancelled state like this:
    what could be the problem?

    Hi Marcsimm,
    Try this
    The error text that pasted indicates that you're getting access denied on workflow calling back to SharePoint.
    Workflow uses signed security tokens to authenticate. The SharePoint Web Application must be claims enabled and not use Forms Based Authentication (which is a requirement of SharePoint OAuth).
    Because the response header only includes WWW-Authenticate: NTLM it would seem that SharePoint is not configured for server-to-server authentication (http://technet.microsoft.com/en-us/library/jj219546.aspx)
    Thanks
    Sivakarunanithi

  • Why my BPM related job goes to sceduled state in sxmb_moni?

    Hi Gurus,
            I am facing a unique problem in a sample BPM scenario. When I run this scenario my corresponding request in sxmb_moni goes to sceduled state. I have to go to QRFC monitor to unlock it. After this my BPM request runs to success. I am not able to understand why this is happening. Why it does not run in one go without getting locked in QRFC?
    My BPM scenario is like this: I am sending a customer number from a ABAP program from SAP R/3 system to XI system via outbound Async interface. This inturn sends customer number to BPM via abstract interface. The BPM then gets customer data from MSSQL server via JDBC adapter and inbound interface.
    This scenario is Async-Sync type.
    I don't see any problem with the mapping, interface etc.
    The scenario runs successfully once I unlock the request in QRFC monitor.
    Can somebody help me identify the reason why my BPM request goes to sceduled state in sxmb_moni?

    Can you try activating/registering your queues .
    sxmb_adm -> manage queues -> activate queues / SXMB_ADM -> Manage Queues -> Register Queues.
    Also in SMQ2 activate individual queues if any.
    ShabZ

  • Promotion and report schedule job goes to pending state

    hi everyone,
    we are using BO4.1 SP02 Patch 1 platform, suddenly now report schedules and promotion jobs are not promoting and it goes pending state.
    we restarted the LCM APS and AJS , but still promotion job in pending state
    we also restarted Webi APS and AJS but still schedule in pending state.
    anyone faced this problem before, could you please help us to find the cause.
    Regards,
    Ganesh

    HI Ganesh
    Can you make it 1 and try out once
    Because 1 = OUTPROC and 100 = MIXEDPROC
    Outproc causes the job server children to shut down after every job
    Mixedproc causes the job server children to shut down after every 100 jobs
    and Job server children will be automatically shutdown if left unused for more than 2 hours
    Can you check the taskmanager for the jobserverchild.exe is created or not ???
    Please get back

  • Project Server jobs going to "Waiting to be processed" state after resolving Error:1053 in virtual environment.

    Hi all,
    I am using project server 2007 in virtual environment. Before some time, my project server queue service was not starting & it gave Error: 1053. Then server team made some small changes in registry & resolved the problem. After that queue service
    was in running condition. But when any job goes into queue, it processed the job first, then after some processing, it goes into "waiting to be processed", and after some time it again starts processing. So, the project server queue is working very
    very slow. I restarted queue, event, sql, timer services, but no benefit.
    In log it is showing "Queue unable to interact with SQL.".
    Please Help....
    Thanks.
    Thanks & Regards Pradeep Gangwar

    Hi Hrishi,
    ULS log is as below:
    ===========================================================
    02/12/2013 10:19:20.99 OWSTIMER.EXE (0x0460)                  
    0x089C
    Windows SharePoint Services   Timer                        
    5uuf Monitorable
    The previous instance of the timer job 'Shared Services Provider Synchronizing Job', id '{AD482C7A-A6D5-4313-A4B6-3F5A78730F61}' for service '{54B6D7E9-6F24-459E-92AC-E11FB157B119}' is still running, so the current instance will be skipped.  Consider
    increasing the interval between jobs.
    02/12/2013 10:20:10.58 w3wp.exe (0x04C0)                      
    0x13FC
    Windows SharePoint Services   General                      
    8m90 Medium  
    105 heaps created, above warning threshold of 32. Check for excessive SPWeb or SPSite usage.
    02/12/2013 10:20:29.99 OWSTIMER.EXE (0x0460)                  
    0x089C
    Windows SharePoint Services   Timer                        
    5uuf Monitorable
    The previous instance of the timer job 'Config Refresh', id '{5BA90EA2-D960-4F00-BF99-2C9C96056FB1}' for service '{46CB2006-65AC-40C6-9B5D-E2924F18B8CD}' is still running, so the current instance will be skipped.  Consider increasing the interval
    between jobs.
    ==========================================================
    And in Event Viewer, it is showing:
    ==========================================================
    Log Name:      Application
    Source:        Office SharePoint Server
    Date:          12-02-2013 10:14:02
    Event ID:      7761
    Task Category: Project Server Queue
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      xyz
    Description:
    Standard Information:PSI Entry Point: 
    Project User: domain\epmadmin
    Correlation Id: a5e020df-ee43-417f-b47c-a1f1142fe2cf
    PWA Site URL: http://xyz/PWA
    SSP Name: SharedServices1
    PSError: Success (0)
    An unxpected exception occurred in the Project Server Queue. Queue type (Project Queue/Timesheet Queue): ProjectQ. Exception details: CompleteGroup failed.
    ===========================================================================================================================================================
    Log Name:      Application
    Source:        Office SharePoint Server
    Date:          12-02-2013 10:14:02
    Event ID:      7758
    Task Category: Project Server Queue
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      xyz
    Description:
    Standard Information:PSI Entry Point: 
    Project User: domain\epmadmin
    Correlation Id: a5e020df-ee43-417f-b47c-a1f1142fe2cf
    PWA Site URL: http://xyz/PWA
    SSP Name: SharedServices1
    PSError: Success (0)
    Queue SQL call failed. Error: System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_MSP_QUEUE_PROJECT_GROUP_ARCHIVE'. 
    Cannot insert duplicate key in object 'dbo.MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
    ===========================================================================================================================================================
    Log Name:      Application
    Source:        Office SharePoint Server
    Date:          12-02-2013 10:14:02
    Event ID:      7754
    Task Category: Project Server Queue
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      xyz
    Description:
    Standard Information:PSI Entry Point: 
    Project User: domain\epmadmin
    Correlation Id: a5e020df-ee43-417f-b47c-a1f1142fe2cf
    PWA Site URL: http://xyz/PWA
    SSP Name: SharedServices1
    PSError: Success (0)
    Queue unable to interact with SQL. Queue type (Project Queue, Timesheet Queue etc): 
    ProjectQ Exception: Microsoft.Office.Project.Server.BusinessLayer.Queue.QueueSqlException: CompleteGroup failed ---> 
    System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_MSP_QUEUE_PROJECT_GROUP_ARCHIVE'. 
    Cannot insert duplicate key in object 'dbo.MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
    ==========================================================
    Thanks & Regards Pradeep Gangwar

  • Jobs are in ready state

    Hi,
    Kernel Release-701
    OS-Linux
    Patch level-117
    dev_disp
    ERROR => DpWPCheck: W55 (pid 7299) died (severity=0, status=11) [dpxxdisp.c   15884]
    child (pid=7299) killed with signal 11
    ERROR => DpWPCheck: W56 (pid 7523) died (severity=0, status=11) [dpxxdisp.c   15884]
    child (pid=7523) killed with signal 11
    ERROR => DpWPCheck: W57 (pid 23473) died (severity=0, status=11) [dpxxdisp.c   15884]
    child (pid=23473) killed with signal 11
    ERROR => DpWPCheck: W58 (pid 7526) died (severity=0, status=11) [dpxxdisp.c   15884]
    child (pid=7526) killed with signal 11
    ERROR => DpWPCheck: W60 (pid 7528) died (severity=0, status=11) [dpxxdisp.c   15884]
    child (pid=7528) killed with signal 11
    SM21 logs
    08:00:05 BTC  055 000 SAPSYS                  EC  F Failed to create log for job /
    08:00:05 BTC  055 000 SAPSYS                  EA  Y Failed to read status entry for job
    08:00:05 BTC  055 000 SAPSYS                  EB  C > Job
    08:00:05 BTC  055 000 SAPSYS                  F2  0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
    08:00:05 BTC  057 000 SAPSYS                  EC  F Failed to create log for job /
    08:00:05 BTC  057 000 SAPSYS                  EA  Y Failed to read status entry for job
    08:00:05 BTC  057 000 SAPSYS                  EB  C > Job
    08:00:05 BTC  057 000 SAPSYS                  F2  0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
    08:00:06 BTC  060 000 SAPSYS                  EC  F Failed to create log for job /
    08:00:06 BTC  060 000 SAPSYS                  EA  Y Failed to read status entry for job
    08:00:06 BTC  060 000 SAPSYS                  EB  C > Job
    08:00:06 BTC  060 000 SAPSYS                  F2  0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
    08:00:06 BTC  056 000 SAPSYS                  EC  F Failed to create log for job /
    08:00:06 BTC  056 000 SAPSYS                  EA  Y Failed to read status entry for job
    08:00:06 BTC  056 000 SAPSYS                  EB  C > Job
    08:00:06 BTC  056 000 SAPSYS                  F2  0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
    08:00:06 BTC  058 000 SAPSYS                  EC  F Failed to create log for job /
    08:00:06 BTC  058 000 SAPSYS                  EA  Y Failed to read status entry for job
    Some jobs are going in ready state
    If i check them then job execute successfully.

    Hi,
    As per my personnel experience, there are lot of errors in kernel support pack 117 of 701 release. Try to use patch level 111 which is good.
    Also, run TEMSE consistency check to check any inconsistency.
    Thanks
    Sunny

  • Job remains in active state indefinitely

    hello everyone,
    i had a request to create a spool for a background job.
    i was getting numerous spools getting created after my coding.i some how rectified the issue and a single spool is generated now.
    but the job remains in active state only.
    please suggest

    check at workprocess level, if the job doing nothing and showing Active on SM37 cancel it and rerun.
    -SS

  • SAP Standard Jobs are getting canceled

    Hi Basis Gurus,
    In our Quality BW 3.5 system the SAP Standard jobs are getting canceled.
    The jobs are as follows
    SAP_APPLICATION_STAT_COLLECTOR
    SAP_CCMS_CPH_HRCOLL
    SAP_CCMS_MONI_BATCH_DP
    SAP_COLLECTOR_FOR_JOBSTATISTIC
    SAP_COLLECTOR_FOR_NONE_R3_STAT
    SAP_COLLECTOR_FOR_PERFMONITOR
    SAPCONNECT ALL SEND
    SAP_REORG_ABAPDUMPS
    SAP_REORG_SPOOL
    SAP_RSICFDLT
    In SM37 when i click on the job log for the above mentioned jobs the system is promting a message saying as "Error reading job log"
    Please let me know how can troubleshoot it and resolve this issue.
    Our is qulaity BW 3.5 system
    Solaris OS
    Oracle Database
    Please help me.
    Regards,
    Anil.

    Hi ,
    For log display reason, try the note suggested. Jobs cancel reason may be due to that the user who schedule that job are locked or not exist on that client. Or other reason will be clear only after log display.
    Ankit

  • Job is getting cancelled in CPS

    Hi,
    We have implemented CPS on SOLMAN, and  when we were submitting a job for one of the SAP system and we are using Job chain method for submiting the job.
    Job is getting cancelled with the below error,please find the below error and log.
    Failed to create the job in the SAP system
    BAPI exception while calling BAPI_XBP_JOB_ADD_ABAP_STEP: E XM 034 Internal problem (function BAPI_XBP_JOB_ADD_ABAP_STEP) [BAPI_XBP_JOB_ADD_ABAP_STEP, , , ]
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.checkBapiReturnCode(ClientConnectionImpl.java:818)
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.call(ClientConnectionImpl.java:605)
         at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection$4.doPerform(AbstractRfcConnection.java:289)
         at com.redwood.scheduler.connector.sap.rfc.connection.RemoteFunctionCall.perform(RemoteFunctionCall.java:130)
         at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.perform(AbstractRfcConnection.java:445)
         at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.execute(AbstractRfcConnection.java:282)
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.SapFunctionModuleWrapper.execute(SapFunctionModuleWrapper.java:194)
         at com.redwood.scheduler.connector.sap.rfc.jco.AbstractSapFunctionModule.execute(AbstractSapFunctionModule.java:107)
         at com.redwood.scheduler.connector.sap.rfc.command.impl.AbapRunPrintCommand.doAddSteps(AbapRunPrintCommand.java:353)
         at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpJobRunCommand.execute(AbstractXbpJobRunCommand.java:177)
         at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpCommand.doExecute(AbstractXbpCommand.java:123)
         at com.redwood.scheduler.connector.sap.rfc.command.AbstractCommand.execute(AbstractCommand.java:56)
         at com.redwood.scheduler.connector.sap.rfc.service.SapJobWork.doWork(SapJobWork.java:107)
         at com.redwood.scheduler.infrastructure.workqueue.Worker.run(Worker.java:59)
         at java.lang.Thread.run(Thread.java:770)

    This message is most of the times thrown when the parameters you specify for the job to run are inconsistent. Possibly a variant name that does not exist or is missing, maybe a printer/sap user name/application server name that does not exist in the target system.

  • Job is getting cancelled

    Hi Friends !
    We have job name RSIMPCUST scheduled by the USER ID ABC. Now this ABC ID no longer exists. Hence job is getting cancelled. In the SM37, I did tried "Repeat Schedule" but thatz also getting cancelled. How I can schedule this job on my ID? Please advise.
    With Regards
    Rekha

    Hi Rekha,
    In order to be able to use the job with your Id please make setting according to this docuement ::
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b6b739-47a6-2e10-9abf-bdac1124dde1?QuickLink=index&overridelayout=true
    Regards,
    Arpit

  • Background job SAP_PERIODIC_ORACLE_SNAPSHOT got cancelled.

    Hi All,
    Background job SAP_PERIODIC_ORACLE_SNAPSHOT got cancelled.
    Im SM37 the log shows that the job has been cancelled because 'No Vendor Specified'
    Is that any variant needs to be specified.
    Please help me on this.
    Thanks & Regards,
    Gopi L.

    Hi,
    Please check the SM21 log and the corresponding work process trace (dev_wX - X refers to the work process number used by the job, can be seen from SM21) for errors.
    Best regards,
    Warren

  • How do I unsubscribe from Adobe Creative Cloud and cancel my Adobe ID? I tried going to "Cancel my membership" on their site but it just takes me in a full circle and I end up back at "Cancel my membership" again.  Is this a ploy to not let go of potentia

    How do I unsubscribe from Adobe Creative Cloud and cancel my Adobe ID? I have tried numerous times going to "Cancel my membership" on their site but it just goes through several steps and ends up where I began (i.e. Cancel my membership). Why is it so difficult to unsubscribe? Thks for any advice. Lavandula

    Adobe contact information will not help You. The Finnish sites are making the same loop. The worst thing is that they have send me e-post telling that my membership will continue after first year automatically with 60 % higher price. I don't need do anything I will not continue the membership. It seems impossible to end it. The onlys solution seems to be close the credit card.

  • Instance going in Running state while invoking DB adapter

    HI,
    I am stuck in a very tricky scenario.
    I have to select data from two tables:- Header and Line table.
    I am using a VIEW to fetch data from both the tables by passing Invoice id.
    Now when ever i am having single line data in Both the tables Header n Line for a single Invoice id, the instance is running successfully.
    But when there is multiple data in Line table for the Invoice id, the instance is going in running state and after every 60 seconds, it is creating a new instance which will also be in running state, thus this will continue and server will go in incompatible state.
    I need to resolve this issue.
    Please help.

    Hi,
    What operation did you use to get the data from the view?
    Did you use the custom sql or Select operation?
    Arik

  • Scheduled jobs are in released state only

    Dear Experts,
    we shedule jobs in background periodically. But for a particular time, all scheduled jobs are in released state only. Please suggest what might be the issue. Even some SAP std jobs have have not started.

    Hi Raghavendra,
    Have you checked enough BTC work process available in your SAP system.
    Use SM65 transaction,goto =>Additional Tests ;check mark "Determine work process status" and "Determine no of jobs in queue"
    and see the test results for any problems.
    Best Regards,
    Shyam Dontamsetty

  • BPEL Composite going in running state

    I have a mediator that reads from AQ and routes it to the BPEL processes based on condition. When there are 15 or 20 instance read from AQ, some of the BPEL processes go into a running state. Once the process goes into a running state, the any instances created for that bpel process goes into running state. There are no errors in the soa-diagnostics log or soa log. We are running WLS server in a single node environment, database installed in a single solaris container and the wls installed in another container. There are no faults generated too. If I redeploy the process, the BPEL process starts working and goes to the same state after some time ( inconsistent). Even if I restart the soa server, the process starts working but goes to running status when load is applied.
    Any help to diagnose the issue will be greatly appreciated.

    Just to be sure, you say the problem happened only if you have 10-15 instances?
    Yes.. Even if it less that 5 but if there are concurrent calls, the problem persistIn each process you have 1 call for each service (EBS,WS,BpelProcess)?
    One BPEL process calls an EBS package( Dbaadapter), Web services each of them are BPEL process
    1st invoke web service call ( which is BPEL process) 2nd invoke is a dbadapter 3rd invoke is service call ( BPEL process)Did you change any of the default parameters on the SOA server, or DB connection?
    >>
    You might consider a problem with the EBS - maybe you are calling an API and there is a db lock...?
    All the queries are only selects. No updates and these apis are tuned.Enter the current running instance - see if the last service is the same for all running instances.

Maybe you are looking for