Remote access anywhere - not working
I am new to servers and found the SBS/essentials 2012 very fascinated. I have been trying to configure this thing for the pass two days to get the remote anywhere access working. I am running on a virtual box using a netpro boeing 300 router.
things i have done:
1. configure tcp port to 443, 3389 for RDP, 1723 for VPN and 80 for http. - should i configure something else on the router
2. am i missing an interface between my router and the internet, machine (server) and internet or server and router?
3. i was able to setup the domain name by creating a certificate (self-signed certified)
however, when i try to configure the application it keeps jamming/stalling/cycling at the VPN option.
i would love to have this area of my life normalized, so i seek some help...step by step process to setup the access.
when i click the configure option it takes me to a screen that allows me to manually configure as the domain was already done. however i get the option to do VPN and remote desktop. and no matter what i try the page was just keeps running.
HELP in configuring and getting this to WORK
Hi,
Please have a check if your server has a pending reboot. If so, could you please reboot the server and try again?
If it still happens, would you mind upload the logs (c:\programdata\microsoft\windows server\logs) to somewhere and let's have an investigation?
Similar Messages
-
Remote access vpn not working, VPNC client
Hi,
I have configured a remote access vpn client on cisco ASA 5520 with the following configuration. we are using cisco vpn client.
tunnel-group consultant type remote-access
tunnel-group consultant general-attributes
address-pool VPN
authentication-server-group RSA-AAA LOCAL
default-group-policy consultant
tunnel-group consultant ipsec-attributes
pre-shared-key *
group-policy consultant internal
group-policy consultant attributes
vpn-idle-timeout 120
vpn-session-timeout 720
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value access-spilt
access-list access-spilt standard permit host 10.101.50.60
One of the linux users is using vpnc and once the user connects to the vpn and the user adds a static route on the machine with the destination pointing to the vpn interface, for example 10.101.50.0/24, user is able to reach all the hosts in the subnet even though the access list on the firewall is configured for one host 10.101.50.60.
I did the same test on a windows machine, but was only able to reach the specific host allowed through vpn. why is the network filter not working for vpnc. please advise.
ThanksHi have solved the issue . enabling the demo 3DES & AES now my VPN is connecting
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
thx to friend "Jennifer Halim" -
Hi all
i am bad at configuring the Remote Access VPN --- please help me on this . i use 3des & AES we dont have the license
i have tried using "sysopt connection permit-vpn"
I have tried using both "same-security-traffic permit inter-interface" && "same-security-traffic permit intra-interface" no luck , please help me on this
VPN configuration - configured using IPsec-Wizard
access-list omsir_splitTunnelAcl standard permit 10.xxx.xxx.0 255.255.255.0
access-list Inside_nat0_outbound_1 line 1 extended permit ip 10.xxx.xxx.0 255.255.255.0 10.xxx.xxx.0 255.255.255.0
sysopt connection permit-vpn
ip local pool ip-pool 10.xxx.xxx.1-10.xxx.xxx.1 mask 255.255.255.0
group-policy omsir internal
group-policy omsir attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value omsir_splitTunnelAcl
dns-server value 10.xxx.xxx.x
default-domain value domain.in
tunnel-group omsir type remote-access
tunnel-group omsir general-attributes
default-group-policy omsir
address-pool ip-pool
tunnel-group omsir ipsec-attributes
pre-shared-key **********
crypto isakmp policy 10 authen pre-share
crypto isakmp policy 10 encrypt des
crypto isakmp policy 10 hash sha
crypto isakmp policy 10 group 2
crypto isakmp policy 10 lifetime 86400
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
nat (Inside) 0 access-list Inside_nat0_outbound_1 tcp 0 0 udp 0
ASA logs - i have attached
Cisco VPN client - log
Cisco Systems VPN Client Version 5.0.03.0530
Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.1.7600
Config file directory: C:\Program Files\Cisco Systems\VPN Client\
1 18:37:37.296 02/13/13 Sev=Info/4 CM/0x63100002
Begin connection process
2 18:37:37.301 02/13/13 Sev=Info/4 CM/0x63100004
Establish secure connection
3 18:37:37.302 02/13/13 Sev=Info/4 CM/0x63100024
Attempt connection with server "1xx.xxx.xx2"
4 18:37:37.307 02/13/13 Sev=Info/6 CM/0x6310002F
Allocated local TCP port 49661 for TCP connection.
5 18:37:39.465 02/13/13 Sev=Info/4 CM/0x63100029
TCP connection established on port 21000 with server "1xx.xxx.xx2"
6 18:37:39.979 02/13/13 Sev=Info/4 CM/0x63100024
Attempt connection with server "1xxx.xxx..2"
7 18:37:39.985 02/13/13 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with 1.xxx.xxx.2.
8 18:37:40.000 02/13/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Unity)) to 1xx.xxx.xx2
9 18:37:40.234 02/13/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 1xx.xxx.xx2
10 18:37:40.234 02/13/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO (FRAG) from 1xx.xxx.xx2
11 18:37:40.237 02/13/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 1xx.xxx.xx2
12 18:37:40.237 02/13/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO (FRAG) from 1xx.xxx.xx2
13 18:37:40.237 02/13/13 Sev=Info/5 IKE/0x63000073
All fragments received.
14 18:37:40.237 02/13/13 Sev=Warning/2 IKE/0xE300009B
Invalid SPI size (PayloadNotify:116)
15 18:37:40.237 02/13/13 Sev=Info/4 IKE/0xE30000A6
Invalid payload: Stated payload length, 568, is not sufficient for Notification:(PayloadList:149)
16 18:37:40.237 02/13/13 Sev=Warning/3 IKE/0xA3000058
Received malformed message or negotiation no longer active (message id: 0x00000000)
17 18:37:45.050 02/13/13 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
18 18:37:45.050 02/13/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 1xx.xxx.xx2
19 18:37:50.119 02/13/13 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
20 18:37:50.119 02/13/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 1xx.xxx.xx2
21 18:37:55.189 02/13/13 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
22 18:37:55.189 02/13/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 1xx.xxx.xx2
23 18:38:00.260 02/13/13 Sev=Info/4 IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=BC4CAF815963A8E4 R_Cookie=FBAF8068234A4675) reason = DEL_REASON_PEER_NOT_RESPONDING
24 18:38:00.777 02/13/13 Sev=Info/4 IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=BC4CAF815963A8E4 R_Cookie=FBAF8068234A4675) reason = DEL_REASON_PEER_NOT_RESPONDING
25 18:38:00.778 02/13/13 Sev=Info/4 CM/0x63100014
Unable to establish Phase 1 SA with server "1xx.xxx.xx2" because of "DEL_REASON_PEER_NOT_RESPONDING"
26 18:38:00.778 02/13/13 Sev=Info/5 CM/0x63100025
Initializing CVPNDrv
27 18:38:00.779 02/13/13 Sev=Info/4 CM/0x6310002D
Resetting TCP connection on port 21000
28 18:38:00.779 02/13/13 Sev=Info/6 CM/0x63100030
Removed local TCP port 49661 for TCP connection.
29 18:38:00.782 02/13/13 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 0.
30 18:38:00.783 02/13/13 Sev=Info/4 IKE/0x63000001
IKE received signal to terminate VPN connection
ASA Runing Config
interface GigabitEthernet0/0
speed 1000
duplex full
nameif Inside
security-level 100
interface GigabitEthernet0/2
nameif Outside
security-level 0
object-group service VPN-Protocols
service-object esp
service-object tcp eq 21000
service-object udp eq 4500
service-object udp eq 62515
service-object udp eq isakmp
** outside Interface Access List for allowing the VPN Traffic**
access-list Ajira_all_traffic extended permit object-group VPN-Protocols any host 1xx.xxx.xxx
access-list omsir_splitTunnelAcl standard permit Server-Segment 255.255.255.0
access-list Inside_nat0_outbound_1 extended permit ip Server-Segment 255.255.255.0 1xx.xxx.xxx 255.255.255.0
ip local pool ip-pool 1xx.xxx.xx1-1xx.xxx.254 mask 255.255.255.0
nat-control
nat (Inside) 0 access-list Inside_nat0_outbound_1
nat (DMZ) 0 access-list DMZ_nat0_outbound outside
access-group Inside_user_access_outside in interface Inside
access-group Ajira_all_traffic in interface Outside
route Outside 0.0.0.0 0.0.0.0 1xx.xxx.xx1
route Inside 10.xxx.xxx.0 255.255.255.0 1xx.xxx.xx1
no sysopt connection reclassify-vpn
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 10
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp ipsec-over-tcp port 21000
group-policy omsir internal
group-policy omsir attributes
dns-server value 1xx.xxx.xxx
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value omsir_splitTunnelAcl
default-domain value agilitylogistics.in
username omsir password DfOF7Lvb0gImB1nE encrypted
tunnel-group omsir type remote-access
tunnel-group omsir general-attributes
address-pool ip-pool
default-group-policy omsir
tunnel-group omsir ipsec-attributes
pre-shared-key omsir@123
class-map Application_Traffic
match access-list Application
class-map Application
class-map Application
match access-list Application
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
policy-map Allplication_all_traffic
class Ajira_traffic
inspect http
policy-map type inspect http application_inspect
parameters
spoof-server "private"
protocol-violation action drop-connection
match req-resp content-type mismatch
drop-connection log
service-policy global_policy global
service-policy Ajira_all_traffic interface Outside
prompt hostname context
Cryptochecksum:217e09da15ede39a7a759eca8c84268f
: endHi have solved the issue . enabling the demo 3DES & AES now my VPN is connecting
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
thx to friend "Jennifer Halim" -
Remote Access Media Not Working correctly
I just installed the newly released Media Plugin for Essentials Server 2012 R2. I was really hoping this would solve the problems I had with first version of Essentials 2012. The media worked fine on Windows Home Server 2011, but I've never been able to
access the folders successfully since installing the new version last year.
I get the above error when I try and access my pictures folder and an empty video folder. This was the same error I had in the previous version. There are raw formatted pictures in this folder that I'm just archiving, but I'm not sure if that would cause
the issue or not.
This is the error I receive when I try to access my Music. I only put in four folders with music and I can see the folders if I access them via the shared folders interface, but I was hoping to stream the music and not download the files. I then simply put
some mp3 files in the folder, but those were not seen either.
I know others had issues with the last version and at one time the "marked answer" was weird files in the folders, but no clarification was given. Are there any ideas out there on how to set this up properly? I'd really love to have this feature
work. It's probably the feature I miss most from Windows Home Server 2011.I didn't notice any errors in the log. I will post it below. I restarted the service and it is running.
I'd love to get this working:
Setup.exe Information: 0 : Launching GUI...
ThreadId=1
DateTime=2013-10-23T02:03:16.8596601Z
Setup.exe Information: 0 : GetVersionEx returns 6.3.9600 (SP 0.0).
ThreadId=3
DateTime=2013-10-23T02:03:19.4417397Z
Setup.exe Information: 0 : RtlGetVersion returns 6.3.9600 (SP 0.0).
ThreadId=3
DateTime=2013-10-23T02:03:19.4447410Z
Setup.exe Information: 0 : GetProductInfo returns 50(0x32).
ThreadId=3
DateTime=2013-10-23T02:03:19.4457406Z
Setup.exe Information: 0 : The operating system is Windows Server 2012 R2 Essentials.
ThreadId=3
DateTime=2013-10-23T02:03:19.4467401Z
Setup.exe Information: 0 : PS> Get-WindowsFeature -Name:ServerEssentialsRole | Select-Object -ExpandProperty:Installed
ThreadId=3
DateTime=2013-10-23T02:03:19.9957563Z
Setup.exe Information: 0 : Windows Server Essentials Experience role is installed.
ThreadId=3
DateTime=2013-10-23T02:03:29.6280511Z
Setup.exe Information: 0 : PS> Import-Module -Name:WssSetupCmdlets -Cmdlet:Get-WssConfigurationStatus
ThreadId=3
DateTime=2013-10-23T02:03:29.6440517Z
Setup.exe Information: 0 : PS> Get-WssConfigurationStatus | Select-Object -ExpandProperty:Status
ThreadId=3
DateTime=2013-10-23T02:03:29.8080570Z
Setup.exe Information: 0 : Get-WssConfigurationStatus returns 'Finished'
ThreadId=3
DateTime=2013-10-23T02:03:29.9290592Z
Setup.exe Information: 0 : Windows Server Essentials Experience role is configured.
ThreadId=3
DateTime=2013-10-23T02:03:29.9290592Z
Setup.exe Information: 0 : Pausing automatic updating...
ThreadId=3
DateTime=2013-10-23T02:03:43.5934789Z
Setup.exe Information: 0 : Installing C:\Users\Steve\AppData\Local\Temp\2\IXP000.TMP\Windows8.1-KB2877939-x64.msu...
ThreadId=3
DateTime=2013-10-23T02:03:44.4985065Z
Setup.exe Information: 0 : wusa.exe exits with code 0.
ThreadId=3
DateTime=2013-10-23T02:07:29.2593836Z
Setup.exe Information: 0 : Resuming automatic updating...
ThreadId=3
DateTime=2013-10-23T02:07:29.2593836Z
Setup.exe Information: 0 : Starting to search update...
ThreadId=3
DateTime=2013-10-23T02:07:29.3043848Z
Setup.exe Information: 0 : PS> Install-WindowsFeature -Name:Desktop-Experience -Confirm:False | Select-Object -ExpandProperty:Success
ThreadId=3
DateTime=2013-10-23T02:07:29.3343851Z
Setup.exe Warning: 0 : PS: You must restart this server to finish the installation process.
ThreadId=9
DateTime=2013-10-23T02:13:33.9205387Z
Setup.exe Information: 0 : Windows Desktop Experience role is installed.
ThreadId=3
DateTime=2013-10-23T02:13:33.9215395Z
Setup.exe Information: 0 : PS> Enable-WindowsOptionalFeature -Online:True -FeatureName:SearchEngine-Server-Package -NoRestart:True | Select-Object -ExpandProperty:Online
ThreadId=3
DateTime=2013-10-23T02:13:33.9275389Z
Setup.exe Warning: 0 : PS: Restart is suppressed because NoRestart is specified.
ThreadId=5
DateTime=2013-10-23T02:13:39.3497048Z
Setup.exe Information: 0 : Windows Search optional feature is enabled.
ThreadId=3
DateTime=2013-10-23T02:13:39.3507050Z
Setup.exe Information: 0 : Turning on media feature auto-enabler...
ThreadId=3
DateTime=2013-10-23T02:13:39.3617041Z
Setup.exe Information: 0 : Setting registry [HKLM\Software\Microsoft\Windows\CurrentVersion\Run] '{61A7F297-9438-4920-9026-893ABD18F741}' = '"C:\Windows\system32\WindowsPowerShell\v1.0\PowerShell.exe" -NonInteractive -Command "C:\Windows\system32\Microsoft.Windows.ServerEssentials.MediaStreamingEnabler.exe"'...
ThreadId=3
DateTime=2013-10-23T02:13:39.3617041Z
Setup.exe Information: 0 : Media feature auto-enabler is turned on/off.
ThreadId=3
DateTime=2013-10-23T02:13:39.3627043Z
Setup.exe Information: 0 : PS> Restart-Computer -Force:True -Confirm:False
ThreadId=1
DateTime=2013-10-23T02:13:48.5809850Z -
Remote video streaming not working with Windows Server Essentials Media Pack
I installed Server Essentials Media Pack and the video streaming via remote access does not seem to be working. I see all the video files on the server's remotewebaccess page in "Media Library" group. When I try to play the video in Chrome
the player appears for a brief moment, but then the browser starts downloading the entire file. With Internet Explorer the empty browser window opens and the download starts. I am trying it while outside of my local network. The video streaming used to work
with Server 2012 Esesentials. Am I missing some additional codecs or remote streaming is no longer supported?Hi,
What’s the default player for these media files on your computer? The issue may be caused by the default player could not load the media file correctly. Please make sure Windows Media Player
with full codec installed is the default one. And then check if the media streaming feature could work as normal. Here is an article about how to configure the media streaming feature, hope it helps.
Manage Digital Media in Windows Server 2012 Essentials
http://technet.microsoft.com/en-us/library/jj628151.aspx
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
Remote DVR will not work?
I signed up for FIOS when it first came to my area. Verizon installed a basic Netgear router. I since upgraded to a wireless Netgear router about 4 years ago. We just upgraded our DVR to a Home Media and tried to turn on the remote DVR. But when I go to the web site it says remote DVR will not work without original Verizon router. I don't understand why it won't work. Is there a setting or something in the router to make it work or do I need a different router that Verizon has to provide? I am guessing the original router I had wouldn't work either because it is the same brand as the one I have now.
Called and got a Westell router today. Got it all hooked up and internet and TV are working fine but I still can't activate remote DVR. The DVR has an access code listed, tells me to go to the website and sign in with my verizon.net id. I do and I still get the error remote DVR not possible with third party router. Any more help?
-
Alternate Access Mapping not working for Zone : Intranet
One of our client want to set Alternate Access Mappint (intranet) with url "intranet.theirDomain.com" with local IP address.
is it possible?
subsequest to my previous question (
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3f39711e-301a-40e8-aa7a-855fa2c268b1/alternate-access-mapping-not-working?forum=sharepointadmin )
I want to ask one more question
Can we configure "intranet.theirDomain.com" with local IP address for any other zone?
or
If there is ".com" within the url then it can't be configured for InTRAnet?
Thanks
S H A J A NThe names for the zones don't matter. You could use the 'extranet' zone for another intranet name if you wanted, the names are just to make it a bit more friendly for beginners.
What you describe sounds routine, you create a web application with a name, then use an AAM to allow users to access it with a more friendly name. Frequently you end up creating
http://intranet.domain.com and
http://intranet as an AAM, or vice versa.
You can use .com for an intranet site, you would need to add the site as an A Host record in your DNS server so that traffic is sent to your internal server rather than out into the wider world. -
Another FPN Thread: Remote role assignment not working
Hi all,
We have successfully implemented FPN for use in our ESS and BW environment and we are experiencing very little problems with it. We now want to start implementing it for our eRecruitment and SRM systems (as producers). For some reason we are not able to use the Remote Role Assignement functionality.
We have set up trust for the systems and use SSO.
Connection test for the producer is successfull.
We can see the Producer content in the pcd on the consumer.
Server times are the same.
As far as I know I have correctly set permissions on producer and consumer.
Possible cause: We are in the process of upgrading our consumer Portal to NW 7.0 SPS15 and have encountered some problems. The system is partially upgraded, so some components are SP15 and some others are still SP13. This is currently under investigation by SAP. Can this be an issue as our producer portals all are still on SP13?
I hope to hear from you soon. Please ask if you need any screenshots. Thanks in advance.
Best regards,
Jan LarosHi Jan,
if remote role assignment not works, you can also use remote delta links. I only work with remote delta links because i have more options and a better performance.
If your connection works you can go to Content Administration ->Portal Content-> NetWeaver-Content-Producer. Hier you can see your remote system. Now you can copy the role and add it to your portal-content.
If you can not see the content make sure that you have the same user on both sides also check the premissions on the portal-content of your remote system. To test the connection it is easier to add Everyone group to the content of your remote system.
regards,
Sharam -
My home sharing and remote app does not work.
Here is my setup:
Macbook 2009 running Mac OS X 10.6.8
Itunes 10.6.1
Ipod Touch 4th gen Mac OS X 5.1
I am on a university secured network.Hi Charles, chinese may be difficult, see our resident language ecxpert, Tom's reply here...
https://discussions.apple.com/message/20061347#20061347
On the slowness...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?
https://discussions.apple.com/servlet/JiveServlet/showImage/2-18666790-125104/AM Pageouts.jpg -
Remote for Tv anywhere not working
My new remote from the box will not work but everything else works fine. Any Ideas how to make my remote work?
My remote doesn't work either. It hasn't worked period. I returned the previous tuner and got a new one, but it still doesn't work. I have windows xp pro corp. on an IBM T40p. I don't know what to do... cept maybe pull my hair out? The jog dial on the side also doesn't work. Please help? Thanks
-
Remote Server Admin not working from outside of network for 1 server
Our company recently changed ISPs and I had to change our two 10.4 server's IP addresses. We have a mail server (intel xserve) and a file/web server (quicksilver g4). Both servers have two network cards in them. The problem is two-fold:
1- I can successfully manage the Xserve machine locally on our network and from my home. However, I can only manage the Quicksilver g4 server locally. Any kind of external access is not even acknowledged.
2- I'm not sure if I missed any steps when changing IP addresses for these server-based computers. Also, I'm not sure if I correctly set our dns names to the correct IP address.
For some background, this is the exact IP update process I used for each server:
Quicksilver G4 (file/web server) - Installed network card #2 and configured it with the new Public IP in the "System Preferences/Network" panel. In Server Admin I set our website to use the new public IP address. (network card #2 has no firewall device in between it and the internet.)
Then, I configured the default network card #1 to a static, yet private IP address that's behind our DLink firewall device with the rest of our network.
Intel Xserve (e-mail server) - Network card #1 was the only one setup before our network change. It had a static, public IP address. When we changed ISPs, I configured network card #2 to the new static, public IP address supplied to us by the new ISP in the "System Preferences/Network" panel. This new IP address is where all email traffic currently gets pointed to. (All mail is successfully sent and delivered.) Until our former ISP gets shutdown, I still have network card #1 configured to the older static public IP address. After the old ISP is shut off, I plan on changing network card #1 to a static, private address.
Any assistance would be greatly appreciated.
Mac OS X (10.4.8)What should I check in AD? I am by no means an expert with AD.
Yes, I am using the same client OS.
I am talking about RDP over the internet, like from home to the office. We have a static IP assigned to the router from ISP. A static internal IP assigned to the server on the LAN. And the router port forwards 3389 to the assigned IP.
It was working fine before we reinstalled Server 2012. These are the steps I took when reinstalling:
1. format drive and install OS
2. rename the server
3. install SQL server
4. Install TFS and SharePoint
5. Add Active Directory role and promote to Domain Controller
6. Add domain users
7. Enable remote access on the server and add users to remote access list -
Remote Desktop Connection not working
I am able to remote desktop connect to my home computer from work; however, I can't remote desktop connect to my work comptuer and server. I believed it has something to do with my Linksys E3000 access point settings but I'm not sure where to look for and verify. I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network. I also VPNP in to my work place so that it has the same IP address as at work and still, remote desktop connection from home to work is not working. Any suggestion is much appreciated.
thebluemamba_24 wrote:
Connecting from home to your remote desktop server has nothing to do with your router. Certain ports are needed to be opened from the server’s end in order to host an application. Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work. In case it will not work, then contact your IT guy.
If you read my previous post it said:
"I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network."
I think my above statement answers your question of "Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work." However, your statement prompts me think of something else. What I have tried is bring my laptop to work and tried connect via RDC to the server and it works but it just not working when trying at home. What I have not done is instead of brining my laptop to work and try RDC there, perhaps I should I try it on a friend's or relative's network and see if I can do RDC to my server at work. If this does not work as well, then, could it be that at work there is something something outside RDC coming? But even if this is so, why can't VPN work? -
Windows 2012 Direct Access ISATAP not working
I just installed Windows 2012 Direct Access and it's working fine for my company's Windows 7 Ent clients. The only issue I can't around with is that ISATAP is not working on this box.
We want to be able to manage-out in our native IPv4 environment, the isatap A record has already been created and is resolvable to all client machines including the Direct Access server. Unfortunately, ISATAP still appears to be Disabled. Do we need to manually
set this to enabled apart from what I've already done?
PS C:\Windows\system32> Get-RemoteAccessHealth
Component RemoteAccessServer HealthState TimeStamp Id
Server localhost OK 1/31/2013
3:26:43 PM
6to4 localhost Disabled 1/31/2013 3:21:44 PM
Vpn Addressing localhost Disabled 1/31/2013 3:21:44 PM
Network Security localhost OK 1/31/2013 3:21:44 PM
Dns localhost OK
1/31/2013 3:26:43 PM
IP-Https localhost OK 1/31/2013 3:21:44 PM
Nat64 localhost OK 1/31/2013
3:21:44 PM
Dns64 localhost OK 1/31/2013
3:21:44 PM
IPsec localhost OK 1/31/2013
3:21:44 PM
Kerberos localhost Disabled 1/31/2013 3:21:44 PM
Domain Controller localhost OK 1/31/2013 3:21:44 PM
Management Servers localhost Disabled 1/31/2013 3:21:44 PM
Network Location ... localhost OK 1/31/2013 3:26:43 PM
Otp localhost Disabled 1/31/2013 3:21:44 PM
High Availability localhost Disabled 1/31/2013 3:21:44 PM
Isatap localhost Disabled 1/31/2013 3:21:44 PM
Vpn Connectivity localhost Dis┌───────────────────────────┐4 PM
Teredo localhost Dis│Enter command number: │4 PM
Network Adapters localhost OK └───────────────────────────┘4 PM
Services localhost OK 1/31/2013 3:26:43 PM
PS C:\Windows\system32> ping isatap
Pinging isatap.isat.com [192.168.1.214] with 32 bytes of data:
Reply from 192.168.1.214: bytes=32 time=1ms TTL=128
Reply from 192.168.1.214: bytes=32 time<1ms TTL=128
Reply from 192.168.1.214: bytes=32 time<1ms TTL=128
Reply from 192.168.1.214: bytes=32 time<1ms TTL=128Hi,
Thank you for the post.
As far as I understand, ISATAP is not recommended for use as the IPv6 to IPv4 transition technology in DirectAccess in Windows Server 2012. With ISATAP disabled DirectAccess clients can initiate connections to computers
on the internal network, and the computers on the internal network are able to respond. However, computers on the internal network will not be able to initiate connections to DirectAccess for purposes of remote client management. If you want to be able to
remote client management, consider deploying native IPv6 for management servers that will connect to DirectAccess client computers.
Regards,
Nick Gu - MSFT -
Keychain access application not working.
keychain not working, click on the generic app. icon and it simply pops up and closes. reloaded osx10.4.3, but no results. anyone have suggestions?
powerbook g4 Mac OS X (10.4.3)Next step is to create a new admin user account, log into it, and see if the problem remains. If not, then it's a problem with the original account. If so, then the problem's system-wide.
If the original account, you have two options: 1) try to find the corrupted file, maybe the com.apple.keychainaccess.plist file in ~/Library/Preferences/. Move it to the desktop, log out and back in, relaunch Keychain Access. If that doesn't work, then check all the .plist files with something like Preferential Treatment. 2) reset your prefs in the new account and eventually delete the original.
If system-wide, then reinstalling the OS using the Archive & Install option, saving user and network settings, might be your only option, especially since reinstalling the combo update didn't fix the problem. -
Satego x200-21u - Remote and HDMI not work on Windows 7
Hey
I have a problem with win7 and the remote that was delivered with my notebook when i bought it
I installed all drivers from the toshiba homepage for win7. I also installed some of the winvista driver, like the webcam- and the touchpad drivers.
The only two things, not working are the remote and the HDMI-Sound output.
my remote doesnt work with win7. and if i connect my notebook to my flat-tv via HDMI-Cable i only see the picture but hear no sound.
I changed also the settings in the soundoptions in win7 from default to Digitalaudio (HDMI) but it doesnt work anyways..
can someone tell me which drivers i need to install these two or what i have to do, to make my remote and the HDMI output work?
thanks alotHi mate,
This is really strange to say because this notebook is a little bit older and therefore there is no official Windows 7 support I think...
Do you have yellow exclamation marks in device manager at the moment?
For HDMI I think chipset, display and sound driver should be installed. Maybe you can get one on the Intel page directly.
Make also sure that the newest BIOS version is installed on your notebook.
Maybe you are looking for
-
How can I install audition at work?
I have downloaded the trial version of audition at my home. Unfortunately, with the birth of my child, I have VERY little time to experiment with it and even when I do, I am usually too wiped out to do so. The only other option I have is during my l
-
DB-Objects not shown in Tabs (right hand side)
From here to now (re-opening the sql-developer), the selected object is not shown on the right hand side tab pane. Double clicking a package show the package in editor mode. Just selecting does not show it in read-only mode. No way to see info and/or
-
I want to print duplex to a 4x6 inch postcard. The printer is set with a duplex queue. No postscript printing only PCL printing. We are on Reports 6i running against the 9i db. The data will come from one record. Fields 1,2,3 go to front side for the
-
Several of us have found the email filter is putting good email into the junk folder.
This started about a week ago. All of us are connected via IMAP to iCloud and for some reason email that never used to be filtered is ending up in the junk mail filter. Anyone else with a similar problem? Any fix?
-
Hi, I have 2 PCs at home and on one itunes installed just fine but on another during installation i am getting the following error: Could not write value ManageLLRouting to key \System\CurrentControlSet\Services\Bonjour\Service\Parameters Anyone has