Remote Access to Windows 2008 R2 Server configured with local IP

Hello,
I have a Windows 2008 R2 Server configured with local IP (e.g. 192.168.1.115).
Please how can I access it remotely outside its local domain through (remote desktop connection).
Thank you.
Tony.

Hi Tony,
Based on your description, you would like to connect to the Windows 2008 R2 server via remote desktop connection.
So you need to enable remote desktop on the Windows 2008 R2 server if it is not already.
1.Install and configure the Remote Desktop Session Host role service in the Windows 2008 R2 server.
2.Add related user to the Remote Desktop Users group in the Windows 2008 R2 server.
3.Configure remote desktop connection in the Client.
Also, due to you would like to access it remotely outside the domain, so you will need a VPN connection or a port forward to connect through.
For more details, please refer to the guide below,
Installing and Configuring Remote Desktop Session Host
http://technet.microsoft.com/en-us/library/dd883253.aspx
Allow Remote Desktop connections from outside your home network
http://windows.microsoft.com/en-IN/windows7/allow-remote-desktop-connections-from-outside-your-home-network
Best Regards,
Tina

Similar Messages

Remote Access to Windows Small Business Server System via VPN

Same old story: I use macs at home but I want to be able to connect to our small company Windows network over the internet to pick up and put down files.
Said company network consists of a server running Microsoft Small Business Server and Exchange. The data sits on some network drives (Z: etc, you know the sort of thing).
I've sorted out email access - I just connect to the Exchange Webmail interface and do all that using a web browser at home.
Now for data: well, I have successfully connected to our company network using VPN PPTP by following the guidance in Pogue's Missing Manual. The VPN window reports that I am connected to ip 192.168.0.150 which our network guru tells me is the address of the "Internal virtual network adapter on the VPN." The actual server PC with the data on it is at .100.
Now, he's a great guy and everything but is definitely a Microsoft man only. When I asked him how to browse our network files on the server he told me to set up a network share using Windows explorer.
So..can anyone please advise how I can translate that action into OSX land? I have searched the Apple support papers but with no success. These days most hits for VPN concern the blessed iPhone....
I have tried in the finder running connect to server and typing in smb://servername. That returns error code -36 "the finder cannot complete the operation because some data in [that address] cannot be read or written". I have tried using the company lan IP address for the server instead and that returns "name or password is not correct".
I appreciate these things often depend completely on the fine details of our setup. If nothing else, does anyone know a good book to assist here - Pogue is a great basic guide but not really detailed enough for this sort of thing. Failing that, how do I find out what error -36 means? Ta.
Message was edited by: Matt McGrath bis

For error -36, might try this...
http://docs.info.apple.com/article.html?artnum=301580
For stubborn Mac<->Windows® problems...
http://www.thursby.com/products/admitmac.html
Other solutions...
http://www.thejackol.com/2005/09/21/os-x-and-windows-server-2003-file-sharing/

Routing and Remote Access Logs (Windows Server 2008 R2)

Hi,
I have a Windows 2008 R2 server running Routing and Remote access and users are using PPTP VPN's to connect to our network.
I have been asked to find logs for the following for connections in to our server
Username used for connection
Computer Name
IP Address used by computer connecting
Start/End time of VPN session
Date
Encryption used
I found an article stating to enable RRAS logs you need to run the following command
To enable RAS logs run command “netsh ras set tracing * enabled” and found a series of logs created in this location C:\Windows\tracing
None appear to contain the information I am looking for and was wondering if I was doing this correctly and if not how I am meant to extract this information?
If you require any more details just let me know.
Kind Regards
David

Hi,
I can’t sure which article you have read, but fur the 2008R2 the RAS to enable the log and the debug log in the KB is descried like this, I recommend you to try the KB
mentioned method.
To configure RRAS to enable logging
1. Start Server Manager. Click Start, click Administrative Tools, and then click Server Manager.
2. In the navigation tree, expand Roles, and then expand Network Policy and Access Services.
3. Right-click Routing and Remote Access, and then click Properties.
4. On the Logging tab, select Log errors only, Log errors and warnings, or Log all events, depending on how much information you want to capture.
5. Click OK to save your changes.
The related KB:
RRAS: Logging should be enabled on the RRAS server
http://technet.microsoft.com/zh-cn/library/ee922651(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

Posted in error.

Unable to login to Report Service on Windows 2008 R2 server

I have reporting services installed on a Windows 2008 R2 server, When I make and RDP connection to the server and go to http://servername/Reports everything works fine. When I try to connect from another client to the web service, it asks for username and
password. it fails 3 times and the shows a blank page.
When I see the Event Viewer in the server (Windows Logs --> Security, I can see an Audit Failure:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          9/4/2014 11:46:25 AM
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      MI-SWACO-DB.houston.livequest.net
Description:
An account failed to log on.
Subject:
   Security ID:       NULL SID
   Account Name:       -
   Account Domain:       -
   Logon ID:       0x0
Logon Type:           3
Account For Which Logon Failed:
   Security ID:       NULL SID
   Account Name:       Administrator
   Account Domain:       HOUSTONLQ
Failure Information:
   Failure Reason:       An Error occured during Logon.
   Status:           0xc000035b
   Sub Status:       0x0
Process Information:
   Caller Process ID:   0x0
   Caller Process Name:   -
Network Information:
   Workstation Name:   MI-SWACO3
   Source Network Address:   -
   Source Port:       -
Detailed Authentication Information:
   Logon Process:
   Authentication Package:   NTLM
   Transited Services:   -
   Package Name (NTLM only):   -
   Key Length:       0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
   - Transited services indicate which intermediate services have participated in this logon request.
   - Package name indicates which sub-protocol was used among the NTLM protocols.
   - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-04T16:46:25.247229500Z" />
    <EventRecordID>8917</EventRecordID>
    <Correlation />
    <Execution ProcessID="504" ThreadID="1344" />
    <Channel>Security</Channel>
    <Computer>MI-SWACO-DB.houston.livequest.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">Administrator</Data>
    <Data Name="TargetDomainName">HOUSTONLQ</Data>
    <Data Name="Status">0xc000035b</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">MI-SWACO3</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">-</Data>
    <Data Name="IpPort">-</Data>
</EventData>
</Event>
The firewall is OFF in both client and server.
I saw a similar question and the answer is related to firewall which is not may case.

Hi Mario,
According to your description, when you try to access the Report Manager in another client, a login dialog prompt. After typing a valid username and password 3 times, a blank page displays.
Generally, the issue is always caused by the Report Server is configured to use Kerberos authentication, while the Service Principal Name(SPN) is not configured correctly. To fix this issue, please refer to the following methods:
Register an SPN for the Report Server service under the domain user account.
Change the service account to run under a built-in account such as Network Service.
Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file.
Besides, the issue can also be caused by the Internet Explorer (IE) didn't pass the user's credential to the Report Server automatically or the IE is not Windows Integrated enabled. For more detail steps about how to address this issue, please refer to the
following steps:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/184c4f6c-b292-4f9a-beca-80b70f4392fe/report-manager-prompts-3-or-4-times-for-usernamepassword-before-letting-users-in?forum=sqlreportingservices
Reference:
Resolving Kerberos Authentication Errors When Connecting to a Report Server
Solving the Reporting Services Login issue in the February CTP of SQL Server 2008
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Acrobat 9 Reader with Windows 2008 Terminal Server

I am setting up a Windows 2008 Terminal Server and i need to have the Adobe Acrobat Reader installed. I downloaded and installed the Vista version and it worked from the console but when i try to access it via a terminal server session the application just crashes. If i try and run it as administrator in the same terminal server session it launches fine.
Any suggestions????
Jason
p.s The associated event log error is:
Log Name:      Application
Source:        Application Error
Date:          7/31/2008 1:17:57 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Comet.invera.com
Description:
Faulting application AcroRd32.exe, version 9.0.0.332, time stamp 0x4850f0a3, faulting module Annots.api, version 9.0.0.332, time stamp 0x4850e57f, exception code 0xc0000005, fault offset 0x001bd9e0, process id 0x1458, application start time 0x01c8f3316002e3b7.
Event Xml:
    1000
    2
    100
    0x80000000000000
    3663
    Application
    Comet.invera.com
    AcroRd32.exe
    9.0.0.332
    4850f0a3
    Annots.api
    9.0.0.332
    4850e57f
    c0000005
    001bd9e0
    1458
    01c8f3316002e3b7

Jason...
Make Certain that you Had the Server In "TS-Install" Mode When you Installed Acrobat. It Is In your Control Panel. I Have Pasted the MS Help File Below.
Install Programs on a Terminal Server
You should install the Terminal Server role service on the computer before you install any programs that you want to make available to users. If you install the Terminal Server role service on a computer that already has programs installed, some of the existing programs may not work correctly in a multiple user environment. Uninstalling and then reinstalling the affected programs may resolve these issues.
To ensure that an application is installed correctly to work in a multiple user environment, you must put the terminal server into a special installation mode before you install the application on the terminal server. This special installation mode ensures that the correct registry entries and .ini files that are needed to support running the application in a multiple user environment are created during the installation process.
You can put a terminal server into this special installation mode by using either of the following:
Install Application on Terminal Server tool under Programs in Control Panel. This tool will run a wizard to help install the application.
Change user /install command at a command prompt. You will have to start the installation of the application manually.
After the application is installed, you must put the terminal server into execution mode before remote users begin using the application. The Install Application on Terminal Server tool will automatically put the terminal server into execution mode when it is finished running. To put the terminal server into execution mode from a command prompt, use the change user /execute command.
Additional considerations
Some programs may require minor setup modifications to run correctly on a terminal server.
If you have programs that are related to each other or have dependencies on each other, you should install the programs on the same terminal server. For example, you should install Microsoft Office as a suite on the same terminal server instead of installing individual Office programs on separate terminal servers.
You should consider installing individual programs on separate terminal servers in the following circumstances:
The program has compatibility issues that may affect other programs.
A single program and the number of associated users may fill server capacity.
For more information about the change user command-line tool, see the Terminal Services Command Reference (http://go.microsoft.com/fwlink/?LinkId=89674).
For more information about deploying programs on a terminal server, see the Terminal Server page on the Windows Server 2008 TechCenter (http://go.microsoft.com/fwlink/?LinkId=79608).

Wyse Thin client not connecting to Windows 2008 R2 server

Configuration
SBS 2011 Server
Windows 2008 R2 server with Remote Desktop Services installed, License Manager installed.
WYSE WT3125SE thin clients with Windows CE 5
I setup the Windows 2008 with Remote Desktop Services and was able to successfully connect the Thin client. Then I installed the License Manger and applied my Open license using User Cals. Was able to login. Next day I get the following
error-"Because of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again" I still can connect fine from other machines even Windows Home Ed.
I remove license server and still was unable to connect. Built a second Windows 2008 R2 server with RDS on it. Was able to connect without issue. Pointed it to the first RDS server license manager and have still been able to connect with
the Thin Client. The thin client can rdp to the SBS server without issue in admin mode, can connect to RDS2 server but not RDS1 with the license manger. So my issue is with the license and so my question is what is it with the license server
running on that server that is keeping thin client from connecting. I even did a reload of RDS1 and tested connecting throughout the process and it worked up until I applied the license and then it stops. And then if I uninstall the license, rds, remove
from domain still not able to connect. Any help would be appreciated.

We had the same problem with older terminals after cloning a 2008R2 rds server and sysprep it.
The original rds server worked fine but when the old terminals connect to the new 1 they come up with the error : Because
of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again"
After reading all of the postings about this issue and tried the reactivate solution of the license server,
I was sure that it had something to do with the x509 certificates that are generated the first time you connect to a valid license server.
What I did, I installed a new license server activate it but did not install licenses on it.
I pointed the defective rds server to the newly installed license server and deleted the following registry keys:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
Certificate
X509 Certificate
X509 Certificate ID
X509 Certificate2
Then reboot.
After the reboot all old terminals can connect fine again. As final step I pointed the rds server to the same license server as the other ones,
reboot and all worked fine.
So conclusion is that when you pont a rds server to a license server that has the new type of licenses on it it will generate the wrong x509 certificates
that are not supported by the older clients, by pointing it first to 1 without any rds calls on it, it generates the older x509 certificates which are compatible with the older rdp clients then the switch to new license server will then not regenerate the
x509 certs so it keeps working.
I hope this helps someone
This issue was driving me crazy so very happy that it is resolved now
Cheers Frits

Internet Explorer Security Support on Windows 7 & WIndows 2008 Std Server

I have an app page (tomcat https) that i was able to open from a windows 7 professional remotely but could not open from a windows 2008 std server. Is there a security settings I need to disable from windows 2008 std server? The firewall is disabled.
Both Win 7 & 2008 is on the same network.
Thanks in advance.
DT

Hi,
I need the error information from the Internet Explorer, if the error code is 404 that should be the webpage is not correctly developed, error code 500 means the tomcat server is not available, you should check the tomcat server, or another situation is
the port number is in use by another application, normally the default port number is 8080, you can try another port number in the comcat configuration file to see the result.
Regards
Wade Liu
TechNet Community Support

Unable to list SFTP Directory on windows 2008 r2 server from internet

Hi experts,
I have configured a SFTP on windows 2008 r2 server. And i am using the Filezilla on client machine to connect to SFTP server.
The connection works properly on internal network but it displays error when i connect from internet.
Error: GnuTLS error -53: Error in the push function.
Response: 550 Data channel timed out.
Error: Failed to retrieve directory listing
This machine is publish with public IP and port22. The connection and authorization process gets complete but stops are Directory Listing.
PLease suggest the troublshooting steps..
Let me know if any more info is rquired.

Hi,
Do you also use the Filezilla to configure SFTP server? Since you use Filezilla on client machine to connect to SFTP server, I would suggest you ask for help from Filezilla forums for better and accurate answer.
https://forum.filezilla-project.org/
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

INS-20802: Problem installing Grid Infrastructure on Windows 2008 R2 Server

Hello,
I try to install the Grid Infrastructure on a Windows 2008 x64 Server. Everything works fine (the SCAN configuration and Verify) but at the end of the installation process I get the following error message:
[INS-20802]: Grid Infrastructure Configuration not successfull.
The errors that I found in the file oraInstall2012-02-27_11-58-26AM.log inside the INVENTORY\LOGS directory :
INFO: Unable to read C:/app/11.2.0/grid/inventory/ContentsXML/comps.xml. Some inventory information may be lost.
INFO: Install type for "Oracle Database 11g 11.2.0.3.0 " is "ASM".
INFO: Conflict while setting install type of "Required Support Files 11.2.0.3.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.assistants.server 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.ntrdbms.oraconfig 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.xdk 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.xdk.server 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.mgw.common 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.rdbms.install.seeddb 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.ctx 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.owb.rsf 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.sysman.console.db 10.1.0.2.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.rdbms.oci 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.ovm 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.sqlj.sqljruntime 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.rdbms.hsodbc 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.marvel 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.dbdev 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.dbjava.server 11.2.0.3.0.
INFO: Install type for "Cluster Ready Services Files 11.2.0.3.0 " is "Complete".
INFO: Conflict while setting install type of "HAS Common Files 11.2.0.3.0 " to "Complete (Complete)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Net Listener 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Internet Directory Client 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle JVM 11.2.0.3.0 " is "Typical".
INFO: OUI-10066:Not all the dependencies for the component Oracle JVM 11.2.0.3.0 could be found. Missing component oracle.javavm.companion 11.2.0.3.0.
INFO: Install type for "Oracle Net 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Netca Client 11.2.0.3.0 " is "Typical".
INFO: Install type for "SQL*Plus 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Database Utilities 11.2.0.3.0 " is "Typical".
INFO: OUI-10066:Not all the dependencies for the component Oracle Database Utilities 11.2.0.3.0 could be found. Missing component oracle.omwb 10.1.0.1.0.
INFO: Install type for "Oracle Recovery Manager 11.2.0.3.0 " is "Typical".
INFO: Install type for "PL/SQL 11.2.0.3.0 " is "Typical".
INFO: Install type for "HAS Files for DB 11.2.0.3.0 " is "Typical".
INFO: Install type for "Assistant Common Files 11.2.0.3.0 " is "Typical".
INFO: Conflict while setting install type of "Oracle Help For Java 4.2.9.0.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Buildtools Common Files 11.2.0.3.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Sun JDK 1.5.0.30.03 " to "Maximum (Complete)". Install type already set to "Maximum (Complete)". Seting it to "Custom (Custom)".
INFO: OUI-10066:Not all the dependencies for the component Assistant Common Files 11.2.0.3.0 could be found. Missing component oracle.bali.kodiak 1.2.1.0.0I.
INFO: Install type for "HAS Common Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Oracle Multimedia 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Multimedia Locator 11.2.0.3.0 " is "Typical".
INFO: Install type for "Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Conflict while setting install type of "Oracle Net Required Support Files 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle Globalization Support 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle Core Required Support Files 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "RDBMS Required Support Files 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle RAC Required Support Files-HAS 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle JDBC/THIN Interfaces 11.2.0.3.0 " is "Typical".
INFO: OUI-10066:Not all the dependencies for the component Oracle JDBC/THIN Interfaces 11.2.0.3.0 could be found. Missing component oracle.dbjava.ucp 11.2.0.3.0.
INFO: Install type for "Oracle Core Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Installation Common Files 11.2.0.3.0 " is "Typical".
INFO: Install type for "Precompiler Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Parser Generator Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Agent Required Support Files 10.2.0.4.3 " is "Custom".
INFO: Install type for "XDK Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Oracle RAC Required Support Files-HAS 11.2.0.3.0 " is "Custom".
INFO: Install type for "Buildtools Common Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Oracle Globalization Support 11.2.0.3.0 " is "Custom".
INFO: Install type for "Oracle Locale Builder 11.2.0.3.0 " is "Custom".
INFO: Conflict while setting install type of "Oracle JFC Extended Windowing Toolkit 4.2.36.0.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Clusterware RDBMS Files 11.2.0.3.0 " is "Typical".
INFO: Install type for "Cluster Verification Utility Common Files 11.2.0.3.0 " is "Typical".
INFO: Install type for "CFS 11.2.0.3.0 " is "Complete".
INFO: Install type for "Oracle Notification Service (eONS) 11.2.0.3.0 " is "Typical".
INFO: Install type for "Cluster Verification Utility Files 11.2.0.3.0 " is "Complete".
INFO: Install type for "Oracle LDAP administration 11.2.0.3.0 " is "Typical".
INFO: Install type for "Deinstallation Tool 11.2.0.3.0 " is "Complete".
INFO: Conflict while setting install type of "Oracle Database Deconfiguration 11.2.0.3.0 " to "Complete (Complete)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Enterprise Manager Common Files 10.2.0.4.3 " is "Complete".
INFO: Install type for "Oracle Notification Service 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Help For Java 4.2.9.0.0 " is "Custom".
INFO: Conflict while setting install type of "Bali Share 1.1.18.0.0 " to "Custom (Custom)". Install type already set to "Maximum (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle Ice Browser 5.2.3.6.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Ice Browser 5.2.3.6.0 " is "Custom".
INFO: Conflict while setting install type of "Oracle Extended Windowing Toolkit 3.4.47.0.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
I have read and implemented all the settings described in DOCs ID 811271.1 , ID 810394.1 and RAC on Windows Step by Step Installation Instructions.
After many attempts with the same error Ii am trying to install in a single node (RAC1). But the error looks the same, my server is clean with no oracle.
Note: For this installation I downloaded and uncompressed the files p10404530_112030_MSWIN-x86-64_1of7.zip, p10404530_112030_MSWIN-x86-64_2of7 and p10404530_112030_MSWIN-x86-64_3of7 of the oracle site.
I do not know what to do for this installation work.
Thanks

My recommendation would be to format the disks and install Linux.
And I say that only half-jokingly. Fail-over with Windows is never as fast or as transparent as with a *NIX O/S.
As to your specific issue ... open an SR with Oracle Support. Hardly anyone uses Windows for Oracle ... even fewer with RAC ... for the reason I gave above.

Cannot TYPE in Windows 2008 remotre server.

I cannot TYPE in Windows 2008 remotre server.
I can open, close, save and ctrl+alt+delete to open the task manager, but that's it because I cannot type.
When I close the remote connection everything else works just fine.

Hi Amanda,
In addition, you can also try to update RDP edition and NIC driver on problematic machines to see if it works.
Best Regards,
Amy

System.Windows.Forms.SaveFileDialog not working under Windows 2008 R2 Server

I am using Windows Server 2008 R2 (64-bit) that is been virtualized with Hyper-V and it is being used as a "Remote Desktop Server".
I am trying to use this PowerShell code that will open a "Save-File-Dialog" box to select the PDF file and send it to my "batch" file for scanning. This code works great on my Windows Vista machine and my Windows 7 32-bit machine
but I cannot get it to work on the "Windows 2008 R2 Server (64-bit)". It will not come up with any window at all and it will not produce any errors at all, so I can't exactly google for this issue. I am using PowerShell 2.0 from 2009.
Any ideas? I tried it from an Admin account and a regular domain users and neither worked at all, no errors, no window, no nothing.
*** Update ***
    I took Out-Null out and I received this...
GAC    Version        Location
True   v2.0.50727     C:\Windows\assembly\GAC_MSIL\System.Windows.Forms\2.0.0.0__b77a5c561934e089\System.Windows.Forms.dll
I then checked the path and the DLL file was in there and it had read and execute permissions for Domain users and Administrators and the window still won't pop up...
Here is the entire code in question.....
# Uses the dot net assembly to give the users a Save-File-Dialog box so they can decide where to put the pdf file
Function Get-SaveFile($initialDirectory){
[System.Reflection.Assembly]::LoadWithPartialName("System.windows.forms") | Out-Null
$SaveFileDialog = New-Object System.Windows.Forms.SaveFileDialog
$SaveFileDialog.initialDirectory = $initialDirectory
$SaveFileDialog.filter = "PDF files (*.pdf)| *.pdf"
$SaveFileDialog.ShowDialog() | Out-Null
$SaveFileDialog.filename
# open dialog box to select the .nessuss file.
$OutputFile = Get-SaveFile
# User selected where they want to put the scanned.pdf file and it will automatically set it to .pdf for them
start-process Scan $OutputFile

I ran the code you have in your function on a Windows 2008 Standard server, and it seems to be hanging on the line
$SaveFileDialog.ShowDialog()
| Out-Null
It just sits there and nothing happens, but if I run it on my Windows 7 machines, it runs without any issues. So it seems like the dialog opened, but behind the scenes, and is waiting on the user, but since it doesn't open, the user can't do anything.
If you find that my post has answered your question, please mark it as the answer. If you find my post to be helpful in anyway, please click vote as helpful.
Don't Retire Technet

Is it appropriate to apply the hardening settings for Windows 2008 R2 server to Windows 2008 server?

We would like to adopt the hardening recommendation for Windows 2008 R2 from CIS to all our DC servers. However, but then we found some of our DC in remote sites are Windows 2008 server only.
Is the hardening settings from Windows 2008 R2 from CIS also applicable to Windows 2008 DC?
Thanks for your attention.

Yes, this should be fine. Hardening only specific security settings, registry keys etc and there's not much difference if you consider hardening.
Just for reference, here's the difference between 2008 and R2 :
http://technet.microsoft.com/en-us/library/dd391932(WS.10).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Installing CR VS2010 on Windows 2008 Core Server

Hello,
We are attempting to re-build our web servers and reduce their footprint. In this effort we have chosen to use Windows 2008 Core Server with all of the web server installation features. In addition we upgraded our application to CR for VS2010 after finding that it supported Windows Server 2008. However, while trying to deploy the MSI packages to the server we are encountering the following error.
MSI PACKAGE
CRRuntime_32bit_13_0_1.msi
ERROR
Error 1904. Modeule C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\pageobjectmodel.dll failed to register. HRESULT -2147024770
SYSTEM INFORMATION
OS Name:                   Microsoft Windows Server 2008 R2 Standard
OS Version:                6.1.7601 Service Pack 1 Build 7601
OS Manufacturer:           Microsoft Corporation
OS Configuration:          Member Server
OS Build Type:             Multiprocessor Free
Registered Owner:          Windows User
Registered Organization:
Product ID:                00477-001-0000421-84205
Original Install Date:     4/27/2011, 10:12:31 AM
System Boot Time:          9/27/2011, 9:47:41 AM
System Manufacturer:       Microsoft Corporation
System Model:              Virtual Machine
System Type:               x64-based PC
Processor(s):              1 Processor(s) Installed.
                           [01]: Intel64 Family 6 Model 44 Stepping 2 GenuineInt
el ~3058 Mhz
BIOS Version:              American Megatrends Inc. 090004 , 3/19/2009
Windows Directory:         C:\Windows
System Directory:          C:\Windows\system32
Boot Device:               \Device\HarddiskVolume4
System Locale:             en-us;English (United States)
Input Locale:              en-us;English (United States)
Time Zone:                 (UTC-08:00) Pacific Time (US & Canada)
Total Physical Memory:     1,536 MB
Available Physical Memory: 1,031 MB
Virtual Memory: Max Size: 3,840 MB
Virtual Memory: Available: 3,316 MB
Virtual Memory: In Use:    524 MB
Hotfix(s):                 32 Hotfix(s) Installed.
                           [01]: KB2425227
                           [02]: KB2446710
                           [03]: KB2476490
                           [04]: KB2478662
                           [05]: KB2503665
                           [06]: KB2506014
                           [07]: KB2506212
                           [08]: KB2506223
                           [09]: KB2507618
                           [10]: KB2507938
                           [11]: KB2508429
                           [12]: KB2509553
                           [13]: KB2510531
                           [14]: KB2511455
                           [15]: KB2518869
                           [16]: KB2524375
                           [17]: KB2525694
                           [18]: KB2533552
                           [19]: KB2534366
                           [20]: KB2536275
                           [21]: KB2536276
                           [22]: KB2539635
                           [23]: KB2552343
                           [24]: KB2555917
                           [25]: KB2556532
                           [26]: KB2560656
                           [27]: KB2563894
                           [28]: KB2567680
                           [29]: KB2570791
                           [30]: KB2570947
                           [31]: KB2616676
                           [32]: KB976902
INSTALLED PACKAGES
Name=Microsoft ASP.NET 2.0 AJAX Extensions 1.0
Name=SolarWinds Log Forwarder for Windows
Name=Microsoft Visual C++ 2005 Redistributable
Name=Microsoft Visual C++ 2008 Redistributable - x86 9.0.21022
Name=Microsoft .NET Framework 4 Extended
Name=Microsoft .NET Framework 4 Client Profile
Any insight you can provide on the issue would be appreciated.
Thanks,
Phil

The DLLS that fail to register are:
pageobjectmodel.dll
reportrenderer.dll
PageObjectModel.dll is missing the following dependencies:
MSVCR80.DLL
OLEDLG.DLL
DEVMGR.DLL
EFSADU.DLL
NETPLWIZ.DLL
RASAPI32.DLL
RASDLG.DLL
SHDOCVW.DLL
TAPI32.DLL
ReportRenderer.dll is missing the following dependencies:
MSVCR80.DLL
OLEDLG.DLL
DEVMGR.DLL
EFSADU.DLL
NETPLWIZ.DLL
RASAPI32.DLL
RASDLG.DLL
SHDOCVW.DLL
TAPI32.DLL
If I ignore the registration errors the installer completes. When I run my application I get the following error:
The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception. >>> Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Do we need to run the full version of Windows Server 2008 for this to work? I have installed the required VC++ run-time dependencies and still no luck.

Windows 2008 DNS & DHCP configuration steps for 11gR2 GI install with GNS

Hi,
I have windows 2008 R2 server with DNS & DHCP services installed. I am planning to install 2 node RAC with GNS option.
The problem is i could not find any document to setup the windows 2008 DNS server for the below steps.
a. Configure GNS VIP : add a name resolution entry in a DNS for the GNS virtual IP address in the forward Lookup file.
gns-server IN A <virtual_IP>
where gns-server is the GNS virtual IP address given during grid installation.
b. Configure the GNS sub-domain delegation: add an entry in the DNS to establish DNS Lookup that directs the DNS resolution of a GNS subdomain to the cluster.
clusterdomain.example.com. NS gns-server.example.com.
where clusterdomain.example.com is the GNS subdomain (provided during grid installation) that you
delegate and gns-server.clustername.com resolves to GNS virtual IP address.
I am aware that this configuration steps has to be taken care by the System administrator. Here is what he tried and the results.
My SA was able to Configure GNS VIP in the DNS and the Nslookup works fine for this.
When he Configures the GNS sub-domain delegation the nslookup fails when trying to resolve the SCAN name.
Any step by step tutorial for this windows 2008 DNS & DHCP configuration for Oracle GNS setup would be highly appreciated.
Thanks,
Ashok Kumar.G

Hi Guys,
Any help on this request will be very helpful.
Thanks,
Ashok Kumar.G

Remote Access to Windows 2008 R2 Server configured with local IP

Similar Messages

Maybe you are looking for