Remote access VPN not working
Hi all
i am bad at configuring the Remote Access VPN --- please help me on this . i use 3des & AES we dont have the license
i have tried using "sysopt connection permit-vpn"
I have tried using both "same-security-traffic permit inter-interface" && "same-security-traffic permit intra-interface" no luck , please help me on this
VPN configuration - configured using IPsec-Wizard
access-list omsir_splitTunnelAcl standard permit 10.xxx.xxx.0 255.255.255.0
access-list Inside_nat0_outbound_1 line 1 extended permit ip 10.xxx.xxx.0 255.255.255.0 10.xxx.xxx.0 255.255.255.0
sysopt connection permit-vpn
ip local pool ip-pool 10.xxx.xxx.1-10.xxx.xxx.1 mask 255.255.255.0
group-policy omsir internal
group-policy omsir attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value omsir_splitTunnelAcl
dns-server value 10.xxx.xxx.x
default-domain value domain.in
tunnel-group omsir type remote-access
tunnel-group omsir general-attributes
default-group-policy omsir
address-pool ip-pool
tunnel-group omsir ipsec-attributes
pre-shared-key **********
crypto isakmp policy 10 authen pre-share
crypto isakmp policy 10 encrypt des
crypto isakmp policy 10 hash sha
crypto isakmp policy 10 group 2
crypto isakmp policy 10 lifetime 86400
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
nat (Inside) 0 access-list Inside_nat0_outbound_1 tcp 0 0 udp 0
ASA logs - i have attached
Cisco VPN client - log
Cisco Systems VPN Client Version 5.0.03.0530
Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.1.7600
Config file directory: C:\Program Files\Cisco Systems\VPN Client\
1 18:37:37.296 02/13/13 Sev=Info/4 CM/0x63100002
Begin connection process
2 18:37:37.301 02/13/13 Sev=Info/4 CM/0x63100004
Establish secure connection
3 18:37:37.302 02/13/13 Sev=Info/4 CM/0x63100024
Attempt connection with server "1xx.xxx.xx2"
4 18:37:37.307 02/13/13 Sev=Info/6 CM/0x6310002F
Allocated local TCP port 49661 for TCP connection.
5 18:37:39.465 02/13/13 Sev=Info/4 CM/0x63100029
TCP connection established on port 21000 with server "1xx.xxx.xx2"
6 18:37:39.979 02/13/13 Sev=Info/4 CM/0x63100024
Attempt connection with server "1xxx.xxx..2"
7 18:37:39.985 02/13/13 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with 1.xxx.xxx.2.
8 18:37:40.000 02/13/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Unity)) to 1xx.xxx.xx2
9 18:37:40.234 02/13/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 1xx.xxx.xx2
10 18:37:40.234 02/13/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO (FRAG) from 1xx.xxx.xx2
11 18:37:40.237 02/13/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 1xx.xxx.xx2
12 18:37:40.237 02/13/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO (FRAG) from 1xx.xxx.xx2
13 18:37:40.237 02/13/13 Sev=Info/5 IKE/0x63000073
All fragments received.
14 18:37:40.237 02/13/13 Sev=Warning/2 IKE/0xE300009B
Invalid SPI size (PayloadNotify:116)
15 18:37:40.237 02/13/13 Sev=Info/4 IKE/0xE30000A6
Invalid payload: Stated payload length, 568, is not sufficient for Notification:(PayloadList:149)
16 18:37:40.237 02/13/13 Sev=Warning/3 IKE/0xA3000058
Received malformed message or negotiation no longer active (message id: 0x00000000)
17 18:37:45.050 02/13/13 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
18 18:37:45.050 02/13/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 1xx.xxx.xx2
19 18:37:50.119 02/13/13 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
20 18:37:50.119 02/13/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 1xx.xxx.xx2
21 18:37:55.189 02/13/13 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
22 18:37:55.189 02/13/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 1xx.xxx.xx2
23 18:38:00.260 02/13/13 Sev=Info/4 IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=BC4CAF815963A8E4 R_Cookie=FBAF8068234A4675) reason = DEL_REASON_PEER_NOT_RESPONDING
24 18:38:00.777 02/13/13 Sev=Info/4 IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=BC4CAF815963A8E4 R_Cookie=FBAF8068234A4675) reason = DEL_REASON_PEER_NOT_RESPONDING
25 18:38:00.778 02/13/13 Sev=Info/4 CM/0x63100014
Unable to establish Phase 1 SA with server "1xx.xxx.xx2" because of "DEL_REASON_PEER_NOT_RESPONDING"
26 18:38:00.778 02/13/13 Sev=Info/5 CM/0x63100025
Initializing CVPNDrv
27 18:38:00.779 02/13/13 Sev=Info/4 CM/0x6310002D
Resetting TCP connection on port 21000
28 18:38:00.779 02/13/13 Sev=Info/6 CM/0x63100030
Removed local TCP port 49661 for TCP connection.
29 18:38:00.782 02/13/13 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 0.
30 18:38:00.783 02/13/13 Sev=Info/4 IKE/0x63000001
IKE received signal to terminate VPN connection
ASA Runing Config
interface GigabitEthernet0/0
speed 1000
duplex full
nameif Inside
security-level 100
interface GigabitEthernet0/2
nameif Outside
security-level 0
object-group service VPN-Protocols
service-object esp
service-object tcp eq 21000
service-object udp eq 4500
service-object udp eq 62515
service-object udp eq isakmp
** outside Interface Access List for allowing the VPN Traffic**
access-list Ajira_all_traffic extended permit object-group VPN-Protocols any host 1xx.xxx.xxx
access-list omsir_splitTunnelAcl standard permit Server-Segment 255.255.255.0
access-list Inside_nat0_outbound_1 extended permit ip Server-Segment 255.255.255.0 1xx.xxx.xxx 255.255.255.0
ip local pool ip-pool 1xx.xxx.xx1-1xx.xxx.254 mask 255.255.255.0
nat-control
nat (Inside) 0 access-list Inside_nat0_outbound_1
nat (DMZ) 0 access-list DMZ_nat0_outbound outside
access-group Inside_user_access_outside in interface Inside
access-group Ajira_all_traffic in interface Outside
route Outside 0.0.0.0 0.0.0.0 1xx.xxx.xx1
route Inside 10.xxx.xxx.0 255.255.255.0 1xx.xxx.xx1
no sysopt connection reclassify-vpn
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 10
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp ipsec-over-tcp port 21000
group-policy omsir internal
group-policy omsir attributes
dns-server value 1xx.xxx.xxx
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value omsir_splitTunnelAcl
default-domain value agilitylogistics.in
username omsir password DfOF7Lvb0gImB1nE encrypted
tunnel-group omsir type remote-access
tunnel-group omsir general-attributes
address-pool ip-pool
default-group-policy omsir
tunnel-group omsir ipsec-attributes
pre-shared-key omsir@123
class-map Application_Traffic
match access-list Application
class-map Application
class-map Application
match access-list Application
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
policy-map Allplication_all_traffic
class Ajira_traffic
inspect http
policy-map type inspect http application_inspect
parameters
spoof-server "private"
protocol-violation action drop-connection
match req-resp content-type mismatch
drop-connection log
service-policy global_policy global
service-policy Ajira_all_traffic interface Outside
prompt hostname context
Cryptochecksum:217e09da15ede39a7a759eca8c84268f
: end
Hi have solved the issue . enabling the demo 3DES & AES now my VPN is connecting
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
thx to friend "Jennifer Halim"
Similar Messages
-
Remote access vpn not working, VPNC client
Hi,
I have configured a remote access vpn client on cisco ASA 5520 with the following configuration. we are using cisco vpn client.
tunnel-group consultant type remote-access
tunnel-group consultant general-attributes
address-pool VPN
authentication-server-group RSA-AAA LOCAL
default-group-policy consultant
tunnel-group consultant ipsec-attributes
pre-shared-key *
group-policy consultant internal
group-policy consultant attributes
vpn-idle-timeout 120
vpn-session-timeout 720
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value access-spilt
access-list access-spilt standard permit host 10.101.50.60
One of the linux users is using vpnc and once the user connects to the vpn and the user adds a static route on the machine with the destination pointing to the vpn interface, for example 10.101.50.0/24, user is able to reach all the hosts in the subnet even though the access list on the firewall is configured for one host 10.101.50.60.
I did the same test on a windows machine, but was only able to reach the specific host allowed through vpn. why is the network filter not working for vpnc. please advise.
ThanksHi have solved the issue . enabling the demo 3DES & AES now my VPN is connecting
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
thx to friend "Jennifer Halim" -
Remote access anywhere - not working
I am new to servers and found the SBS/essentials 2012 very fascinated. I have been trying to configure this thing for the pass two days to get the remote anywhere access working. I am running on a virtual box using a netpro boeing 300 router.
things i have done:
1. configure tcp port to 443, 3389 for RDP, 1723 for VPN and 80 for http. - should i configure something else on the router
2. am i missing an interface between my router and the internet, machine (server) and internet or server and router?
3. i was able to setup the domain name by creating a certificate (self-signed certified)
however, when i try to configure the application it keeps jamming/stalling/cycling at the VPN option.
i would love to have this area of my life normalized, so i seek some help...step by step process to setup the access.
when i click the configure option it takes me to a screen that allows me to manually configure as the domain was already done. however i get the option to do VPN and remote desktop. and no matter what i try the page was just keeps running.
HELP in configuring and getting this to WORKHi,
Please have a check if your server has a pending reboot. If so, could you please reboot the server and try again?
If it still happens, would you mind upload the logs (c:\programdata\microsoft\windows server\logs) to somewhere and let's have an investigation? -
Remote Access Media Not Working correctly
I just installed the newly released Media Plugin for Essentials Server 2012 R2. I was really hoping this would solve the problems I had with first version of Essentials 2012. The media worked fine on Windows Home Server 2011, but I've never been able to
access the folders successfully since installing the new version last year.
I get the above error when I try and access my pictures folder and an empty video folder. This was the same error I had in the previous version. There are raw formatted pictures in this folder that I'm just archiving, but I'm not sure if that would cause
the issue or not.
This is the error I receive when I try to access my Music. I only put in four folders with music and I can see the folders if I access them via the shared folders interface, but I was hoping to stream the music and not download the files. I then simply put
some mp3 files in the folder, but those were not seen either.
I know others had issues with the last version and at one time the "marked answer" was weird files in the folders, but no clarification was given. Are there any ideas out there on how to set this up properly? I'd really love to have this feature
work. It's probably the feature I miss most from Windows Home Server 2011.I didn't notice any errors in the log. I will post it below. I restarted the service and it is running.
I'd love to get this working:
Setup.exe Information: 0 : Launching GUI...
ThreadId=1
DateTime=2013-10-23T02:03:16.8596601Z
Setup.exe Information: 0 : GetVersionEx returns 6.3.9600 (SP 0.0).
ThreadId=3
DateTime=2013-10-23T02:03:19.4417397Z
Setup.exe Information: 0 : RtlGetVersion returns 6.3.9600 (SP 0.0).
ThreadId=3
DateTime=2013-10-23T02:03:19.4447410Z
Setup.exe Information: 0 : GetProductInfo returns 50(0x32).
ThreadId=3
DateTime=2013-10-23T02:03:19.4457406Z
Setup.exe Information: 0 : The operating system is Windows Server 2012 R2 Essentials.
ThreadId=3
DateTime=2013-10-23T02:03:19.4467401Z
Setup.exe Information: 0 : PS> Get-WindowsFeature -Name:ServerEssentialsRole | Select-Object -ExpandProperty:Installed
ThreadId=3
DateTime=2013-10-23T02:03:19.9957563Z
Setup.exe Information: 0 : Windows Server Essentials Experience role is installed.
ThreadId=3
DateTime=2013-10-23T02:03:29.6280511Z
Setup.exe Information: 0 : PS> Import-Module -Name:WssSetupCmdlets -Cmdlet:Get-WssConfigurationStatus
ThreadId=3
DateTime=2013-10-23T02:03:29.6440517Z
Setup.exe Information: 0 : PS> Get-WssConfigurationStatus | Select-Object -ExpandProperty:Status
ThreadId=3
DateTime=2013-10-23T02:03:29.8080570Z
Setup.exe Information: 0 : Get-WssConfigurationStatus returns 'Finished'
ThreadId=3
DateTime=2013-10-23T02:03:29.9290592Z
Setup.exe Information: 0 : Windows Server Essentials Experience role is configured.
ThreadId=3
DateTime=2013-10-23T02:03:29.9290592Z
Setup.exe Information: 0 : Pausing automatic updating...
ThreadId=3
DateTime=2013-10-23T02:03:43.5934789Z
Setup.exe Information: 0 : Installing C:\Users\Steve\AppData\Local\Temp\2\IXP000.TMP\Windows8.1-KB2877939-x64.msu...
ThreadId=3
DateTime=2013-10-23T02:03:44.4985065Z
Setup.exe Information: 0 : wusa.exe exits with code 0.
ThreadId=3
DateTime=2013-10-23T02:07:29.2593836Z
Setup.exe Information: 0 : Resuming automatic updating...
ThreadId=3
DateTime=2013-10-23T02:07:29.2593836Z
Setup.exe Information: 0 : Starting to search update...
ThreadId=3
DateTime=2013-10-23T02:07:29.3043848Z
Setup.exe Information: 0 : PS> Install-WindowsFeature -Name:Desktop-Experience -Confirm:False | Select-Object -ExpandProperty:Success
ThreadId=3
DateTime=2013-10-23T02:07:29.3343851Z
Setup.exe Warning: 0 : PS: You must restart this server to finish the installation process.
ThreadId=9
DateTime=2013-10-23T02:13:33.9205387Z
Setup.exe Information: 0 : Windows Desktop Experience role is installed.
ThreadId=3
DateTime=2013-10-23T02:13:33.9215395Z
Setup.exe Information: 0 : PS> Enable-WindowsOptionalFeature -Online:True -FeatureName:SearchEngine-Server-Package -NoRestart:True | Select-Object -ExpandProperty:Online
ThreadId=3
DateTime=2013-10-23T02:13:33.9275389Z
Setup.exe Warning: 0 : PS: Restart is suppressed because NoRestart is specified.
ThreadId=5
DateTime=2013-10-23T02:13:39.3497048Z
Setup.exe Information: 0 : Windows Search optional feature is enabled.
ThreadId=3
DateTime=2013-10-23T02:13:39.3507050Z
Setup.exe Information: 0 : Turning on media feature auto-enabler...
ThreadId=3
DateTime=2013-10-23T02:13:39.3617041Z
Setup.exe Information: 0 : Setting registry [HKLM\Software\Microsoft\Windows\CurrentVersion\Run] '{61A7F297-9438-4920-9026-893ABD18F741}' = '"C:\Windows\system32\WindowsPowerShell\v1.0\PowerShell.exe" -NonInteractive -Command "C:\Windows\system32\Microsoft.Windows.ServerEssentials.MediaStreamingEnabler.exe"'...
ThreadId=3
DateTime=2013-10-23T02:13:39.3617041Z
Setup.exe Information: 0 : Media feature auto-enabler is turned on/off.
ThreadId=3
DateTime=2013-10-23T02:13:39.3627043Z
Setup.exe Information: 0 : PS> Restart-Computer -Force:True -Confirm:False
ThreadId=1
DateTime=2013-10-23T02:13:48.5809850Z -
Remote Access VPN connecting but not passing traffic
I have a remote access VPN configured on a device here. I'm able to connect a device and it assigns me an IP address out of the pool, and injects the routes to its local network, but I'm not able to pass any traffic through the VPN and none of the IPSec SA counters increment for the dial-in connection. I've compared the config here to the samples from documentation and I don't know what I'm missing. Config is below.
3118-FWL001(config)# sho run
: Saved
ASA Version 7.2(3)
hostname 3118-FWL001
domain-name rr-rentals.com
enable password hEgvNHfNHV8zypPu encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 199.X.X.162 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd 2KFQnbNIdI.2KYOU encrypted
banner exec
banner exec
banner exec
banner exec Any attempted or unauthorized access, use, or modification is prohibited.
banner exec Unauthorized users may face criminal and/or civil penalties.
banner exec The use of this system may be monitored and recorded.
banner exec If the monitoring reveals possible evidence of criminal activity, Adhost can
banner exec provide the records to law enforcement.
banner exec Be safe! Do not share your access information with anyone!
banner exec
banner exec
banner exec
banner asdm
banner asdm
banner asdm
banner asdm Any attempted or unauthorized access, use, or modification is prohibited.
banner asdm Unauthorized users may face criminal and/or civil penalties.
banner asdm The use of this system may be monitored and recorded.
banner asdm If the monitoring reveals possible evidence of criminal activity, Adhost can
banner asdm provide the records to law enforcement.
banner asdm Be safe! Do not share your access information with anyone!
banner asdm
banner asdm
banner asdm
ftp mode passive
dns server-group DefaultDNS
domain-name rr-rentals.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list outside_acl extended permit ip any host 199.X.X.163
access-list outside_acl extended permit icmp any any echo
access-list outside_acl extended permit icmp any any echo-reply
access-list outside_acl extended permit tcp 216.X.X.64 255.255.255.192 any
access-list outside_acl extended permit tcp host 76.X.X.166 any eq 3389
access-list outside_acl extended permit tcp 67.X.X.192 255.255.255.224 any eq 3389
access-list outside_acl extended permit tcp any any eq ftp
access-list outside_acl extended permit tcp any any eq ftp-data
access-list outside_acl extended permit tcp host 72.X.X.71 any eq 3389
access-list outside_acl extended permit tcp host 26.X.X.155 any eq 3389
access-list outside_acl extended permit tcp host 24.X.X.155 any eq 3389
access-list outside_acl extended permit icmp any any unreachable
access-list outside_acl extended permit icmp any any time-exceeded
access-list outside_acl extended permit tcp host 71.X.X.170 any eq 3389
access-list outside_acl extended permit tcp host 24.X.X.200 any eq 3389
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.4.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.20.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.20.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.20.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.20.0 255.255.255.0 192.168.10.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.20.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list outside_2_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list outside_4_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.4.0 255.255.255.0
access-list outside_3_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list rr-vpn_splitTunnelAcl standard permit 192.168.10.0 255.255.255.0
access-list rr-vpn_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
pager lines 24
logging enable
logging buffer-size 1048576
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 192.168.20.1-192.168.20.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 199.X.X.163 192.168.10.2 netmask 255.255.255.255
access-group outside_acl in interface outside
route outside 0.0.0.0 0.0.0.0 199.X.X.161 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 216.X.X.64 255.255.255.192 outside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection tcpmss 1200
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 50.X.X.58
crypto map outside_map 1 set transform-set ESP-AES-128-SHA
crypto map outside_map 2 match address outside_2_cryptomap
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer 75.X.X.253
crypto map outside_map 2 set transform-set ESP-AES-128-SHA
crypto map outside_map 3 match address outside_3_cryptomap
crypto map outside_map 3 set pfs
crypto map outside_map 3 set peer 173.X.X.69
crypto map outside_map 3 set transform-set ESP-AES-128-SHA
crypto map outside_map 4 match address outside_4_cryptomap
crypto map outside_map 4 set pfs
crypto map outside_map 4 set peer 70.X.X.194
crypto map outside_map 4 set transform-set ESP-AES-128-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash sha
group 5
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.10.2 255.255.255.255 inside
ssh 192.168.0.0 255.255.0.0 inside
ssh 216.X.X.64 255.255.255.192 outside
ssh 50.X.X.58 255.255.255.255 outside
ssh timeout 60
ssh version 2
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
inspect icmp error
service-policy global_policy global
tftp-server outside 216.X.X.116 3118-FWL001.config
group-policy rr-vpn internal
group-policy rr-vpn attributes
dns-server value 216.X.X.12 66.X.X.11
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value rr-vpn_splitTunnelAcl
username rrlee password B6rKS8LmKC50oIXK encrypted privilege 0
username rrlee attributes
vpn-group-policy rr-vpn
username cschirado password QYICGrOFAZ9iPWpp encrypted privilege 0
username cschirado attributes
vpn-group-policy rr-vpn
username daniel password SZsXZCSuVXcFn9NB encrypted privilege 15
username adhostadm password 7P2Y2Ow1o0.VSjvh encrypted privilege 15
username troy password amZKsxVU.8N9kKPb encrypted privilege 0
username troy attributes
vpn-group-policy rr-vpn
username troyr password Hek9zbMrM6wEDSfi encrypted privilege 15
username druiz password 33oau7XOcvhJ3DMv encrypted privilege 0
username druiz attributes
vpn-group-policy rr-vpn
username theresa password qWsPnR.vfjXzlunC encrypted privilege 0
username theresa attributes
vpn-group-policy rr-vpn
username kevin password R5DPfUVhzGCEg6pu encrypted privilege 0
username kevin attributes
vpn-group-policy rr-vpn
username andrea password MyhIPdH6UJQDon77 encrypted privilege 0
username andrea attributes
vpn-group-policy rr-vpn
tunnel-group 50.X.X.58 type ipsec-l2l
tunnel-group 50.X.X.58 ipsec-attributes
pre-shared-key *
tunnel-group 75.X.X.253 type ipsec-l2l
tunnel-group 75.X.X.253 ipsec-attributes
pre-shared-key *
tunnel-group 72.X.X.71 type ipsec-l2l
tunnel-group 72.X.X.71 ipsec-attributes
pre-shared-key *
tunnel-group 173.X.X.69 type ipsec-l2l
tunnel-group 173.X.X.69 ipsec-attributes
pre-shared-key *
tunnel-group rr-vpn type ipsec-ra
tunnel-group rr-vpn general-attributes
address-pool vpnpool
default-group-policy rr-vpn
tunnel-group rr-vpn ipsec-attributes
pre-shared-key *
tunnel-group 70.X.X.194 type ipsec-l2l
tunnel-group 70.X.X.194 ipsec-attributes
pre-shared-key *
prompt hostname contextHere are the results of the commands you requested. I'm not able to ping either direction.
Thanks,
James
3118-FWL001# sho cry isa sa
Active SA: 5
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 5
1 IKE Peer: 50.34.254.58
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
2 IKE Peer: 173.10.71.69
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
3 IKE Peer: 75.151.109.253
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
4 IKE Peer: 70.99.88.194
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
5 IKE Peer: 216.211.143.85
Type : user Role : responder
Rekey : no State : AM_ACTIVE
3118-FWL001# sho cry ips sa
interface: outside
Crypto map tag: outside_dyn_map, seq num: 20, local addr: 199.21.66.162
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.20.2/255.255.255.255/0/0)
current_peer: 216.211.143.85, username: kevin
dynamic allocated peer ip: 192.168.20.2
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 216.211.143.85
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: CBF94621
inbound esp sas:
spi: 0x8D8279CA (2374138314)
transform: esp-3des esp-sha-hmac none
in use settings ={RA, Tunnel, }
slot: 0, conn_id: 200, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 28715
IV size: 8 bytes
replay detection support: Y
outbound esp sas:
spi: 0xCBF94621 (3422111265)
transform: esp-3des esp-sha-hmac none
in use settings ={RA, Tunnel, }
slot: 0, conn_id: 200, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 28715
IV size: 8 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 1, local addr: 199.21.66.162
access-list outside_1_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
current_peer: 50.34.254.58
#pkts encaps: 15356573, #pkts encrypt: 15356573, #pkts digest: 15356573
#pkts decaps: 9021115, #pkts decrypt: 9021114, #pkts verify: 9021114
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 15356573, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 50.34.254.58
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: FE16571B
inbound esp sas:
spi: 0x78BD7E4F (2025684559)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 86, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4263158/5788)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0xFE16571B (4262876955)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 86, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4064653/5788)
IV size: 16 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 4, local addr: 199.21.66.162
access-list outside_4_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.4.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.4.0/255.255.255.0/0/0)
current_peer: 70.99.88.194
#pkts encaps: 491814, #pkts encrypt: 491814, #pkts digest: 491814
#pkts decaps: 416810, #pkts decrypt: 416810, #pkts verify: 416810
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 491814, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 70.99.88.194
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 533F55E1
inbound esp sas:
spi: 0xE2F461AD (3807666605)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 194, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4273818/27167)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0x533F55E1 (1396659681)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 194, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4266133/27167)
IV size: 16 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 2, local addr: 199.21.66.162
access-list outside_2_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.2.0/255.255.255.0/0/0)
current_peer: 75.151.109.253
#pkts encaps: 207718, #pkts encrypt: 207718, #pkts digest: 207718
#pkts decaps: 142739, #pkts decrypt: 142739, #pkts verify: 142739
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 207722, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 75.151.109.253
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 8D74AC18
inbound esp sas:
spi: 0x0CF7F70B (217577227)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 195, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4274490/23242)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0x8D74AC18 (2373233688)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 195, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4270718/23242)
IV size: 16 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 3, local addr: 199.21.66.162
access-list outside_3_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.3.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.3.0/255.255.255.0/0/0)
current_peer: 173.10.71.69
#pkts encaps: 3427935, #pkts encrypt: 3427935, #pkts digest: 3427935
#pkts decaps: 2006044, #pkts decrypt: 2006044, #pkts verify: 2006044
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 3427935, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 173.10.71.69
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 2E8A6147
inbound esp sas:
spi: 0x467968AB (1182361771)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 154, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4270213/18597)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0x2E8A6147 (780820807)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 154, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4162093/18597)
IV size: 16 bytes
replay detection support: Y
3118-FWL001# sho run route
route outside 0.0.0.0 0.0.0.0 199.21.66.161 1 -
Remote access VPN with Cisco Router - Can not get the Internal Lan .
Dear Sir ,
I am doing Remote Access VPN through Cisco Router. Before the real deployment, I want to simulate it with GNS3.Need you help to complete the job .Please see the attachment for Scenario, Configuration and Ping status.
I am getting IP address when i connect through VPN client .But I can not ping to the internal lan -192.168.1.0.Need your help to sole the issue.
Below is the IP address of the device.
Local PC connect with Router -2 (Through MS Loopback) Router -2 Router-1 PC -01
IP Address :10.10.10.2 Mask : 255.255.255.0 F0/01
IP address:10.10.10.1
Mask:255.255.255.0 F0/0
IP Address :20.20.20.1
Mask :255.255.255.0
F0/1
IP address :192.168.1.3
Mask:255.255.255.0
F0/0
IP address :20.20.20.2
Mask :255.255.255.0
F0/1
IP address :192.168.1.1
Mask:255.255.255.0
I can ping from local PC to the network 10.10.10.0 and 20.20.20.0 .Please find the attach file for ping status .So connectivity is ok from my local PC to Remote Router 1 and 2.
Through Cisco remote vpn client, I can get connected with the VPN Router R1 (Please see the VPN Client pic.)But cannot ping the network 192.168.1.0
Need your help to fix the problem.
Router R2 Configuration :!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R2
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
ip tcp synwait-time 5
interface FastEthernet0/0
ip address 20.20.20.2 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
ip address 10.10.10.1 255.255.255.0
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
control-plane
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
end
Router R1 Configuration :
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
aaa new-model
aaa authentication login USERAUTH local
aaa authorization network NETAUTHORIZE local
aaa session-id common
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
username vpnuser password 0 strongpassword
ip tcp synwait-time 5
crypto keyring vpnclientskey
pre-shared-key address 0.0.0.0 0.0.0.0 key cisco123
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp client configuration group remotevpn
key cisco123
dns 192.168.1.2
wins 192.168.1.2
domain mycompany.com
pool vpnpool
acl VPN-ACL
crypto isakmp profile remoteclients
description remote access vpn clients
keyring vpnclientskey
match identity group remotevpn
client authentication list USERAUTH
isakmp authorization list NETAUTHORIZE
client configuration address respond
crypto ipsec transform-set TRSET esp-3des esp-md5-hmac
crypto dynamic-map DYNMAP 10
set transform-set TRSET
set isakmp-profile remoteclients
crypto map VPNMAP 10 ipsec-isakmp dynamic DYNMAP
interface FastEthernet0/0
ip address 20.20.20.1 255.255.255.0
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map VPNMAP
interface FastEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip local pool vpnpool 192.168.50.1 192.168.50.10
ip forward-protocol nd
ip route 10.10.10.0 255.255.255.0 FastEthernet0/0
no ip http server
no ip http secure-server
ip nat inside source list NAT-ACL interface FastEthernet0/0 overload
ip access-list extended NAT-ACL
deny ip 192.168.1.0 0.0.0.255 192.168.50.0 0.0.0.255
permit ip 192.168.1.0 0.0.0.255 any
ip access-list extended VPN-ACL
permit ip 192.168.1.0 0.0.0.255 192.168.50.0 0.0.0.255
control-plane
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
endDear All,
I am doing Remote Access VPN through Cisco Router. Before the real deployment, I want to simulate it with GNS3.Need you help to complete the job .
Please see the attachment for Scenario, Configuration and Ping status. I am getting IP address when i connect through VPN client .But I can not ping to the internal lan -192.168.1.0.Need your help to sole the issue.
Waiting for your responce .
--Milon -
Hii frnds,
here is the configuration in my router C1841..for the cisco ipsec remote access vpn..i was able to establish a vpn session properly...but there after i can only reach up to the inside interfaces of the router..but not to the lan devices...
Below is the out put from the router
r1#sh run
Building configuration...
Current configuration : 3488 bytes
! Last configuration change at 20:07:20 UTC Tue Apr 23 2013 by ramana
! NVRAM config last updated at 11:53:16 UTC Sun Apr 21 2013 by ramana
version 15.1
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname r1
boot-start-marker
boot-end-marker
enable secret 5 $1$6RzF$L6.zOaswedwOESNpkY0Gb.
aaa new-model
aaa authentication login local-console local
aaa authentication login userauth local
aaa authorization network groupauth local
aaa session-id common
dot11 syslog
ip source-route
ip cef
ip domain name r1.com
multilink bundle-name authenticated
license udi pid CISCO1841 sn FHK145171DM
username ramana privilege 15 secret 5 $1$UE7J$u9nuCPGaAasL/k7CxtNMj.
username giet privilege 15 secret 5 $1$esE5$FD9vbBwTgHERdRSRod7oD.
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group ra-vpn
key xxxxxx
domain r1.com
pool vpn-pool
acl 150
save-password
include-local-lan
max-users 10
crypto ipsec transform-set my-vpn esp-3des esp-md5-hmac
crypto dynamic-map RA 1
set transform-set my-vpn
reverse-route
crypto map ra-vpn client authentication list userauth
crypto map ra-vpn isakmp authorization list groupauth
crypto map ra-vpn client configuration address respond
crypto map ra-vpn 1 ipsec-isakmp dynamic RA
interface Loopback0
ip address 10.2.2.2 255.255.255.255
interface FastEthernet0/0
bandwidth 8000000
ip address 117.239.xx.xx 255.255.255.240
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map ra-vpn
interface FastEthernet0/1
description $ES_LAN$
ip address 192.168.10.252 255.255.255.0 secondary
ip address 10.10.10.1 255.255.252.0 secondary
ip address 172.16.0.1 255.255.252.0 secondary
ip address 10.10.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip local pool vpn-pool 172.18.1.1 172.18.1.100
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip dns server
ip nat pool INTERNETPOOL 117.239.xx.xx 117.239.xx.xx netmask 255.255.255.240
ip nat inside source list 100 pool INTERNETPOOL overload
ip route 0.0.0.0 0.0.0.0 117.239.xx.xx
access-list 100 permit ip 10.10.7.0 0.0.0.255 any
access-list 100 permit ip 10.10.10.0 0.0.1.255 any
access-list 100 permit ip 172.16.0.0 0.0.3.255 any
access-list 100 permit ip 192.168.10.0 0.0.0.255 any
access-list 150 permit ip 10.10.7.0 0.0.0.255 172.18.0.0 0.0.255.255
access-list 150 permit ip host 10.2.2.2 172.18.1.0 0.0.0.255
access-list 150 permit ip 192.168.10.0 0.0.0.255 172.18.1.0 0.0.0.255
control-plane
line con 0
login authentication local-console
line aux 0
line vty 0 4
login authentication local-console
transport input telnet ssh
scheduler allocate 20000 1000
end
r1>sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is 117.239.xx.xx to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 117.239.xx.xx
10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
C 10.2.2.2/32 is directly connected, Loopback0
C 10.10.7.0/24 is directly connected, FastEthernet0/1
L 10.10.7.1/32 is directly connected, FastEthernet0/1
C 10.10.8.0/22 is directly connected, FastEthernet0/1
L 10.10.10.1/32 is directly connected, FastEthernet0/1
117.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 117.239.xx.xx/28 is directly connected, FastEthernet0/0
L 117.239.xx.xx/32 is directly connected, FastEthernet0/0
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.0.0/22 is directly connected, FastEthernet0/1
L 172.16.0.1/32 is directly connected, FastEthernet0/1
172.18.0.0/32 is subnetted, 1 subnets
S 172.18.1.39 [1/0] via 49.206.59.86, FastEthernet0/0
192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.10.0/24 is directly connected, FastEthernet0/1
L 192.168.10.252/32 is directly connected, FastEthernet0/1
r1#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
117.239.xx.xx 49.206.59.86 QM_IDLE 1043 ACTIVE
IPv6 Crypto ISAKMP SA
r1 #sh crypto ipsec sa
interface: FastEthernet0/0
Crypto map tag: giet-vpn, local addr 117.239.xx.xx
protected vrf: (none)
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (172.18.1.39/255.255.255.255/0/0)
current_peer 49.206.59.86 port 50083
PERMIT, flags={}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 2, #pkts decrypt: 2, #pkts verify: 2
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
local crypto endpt.: 117.239.xx.xx, remote crypto endpt.: 49.206.xx.xx
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
current outbound spi: 0x550E70F9(1427009785)
PFS (Y/N): N, DH group: none
inbound esp sas:
spi: 0x5668C75(90606709)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2089, flow_id: FPGA:89, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550169/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x550E70F9(1427009785)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2090, flow_id: FPGA:90, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550170/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:hi Maximilian Schojohann..
First i would like to Thank you for showing interest in solving my issue...After some research i found that desabling the " IP CEF" will solve the issue...when i desable i was able to communicate success fully with the router lan..But when i desable " IP CEF " Router cpu processer goes to 99% and hangs...
In the output of " sh process cpu" it shows 65% of utilization from "IP INPUT"
so plz give me an alternate solution ....thanks in advance.... -
Remote Access VPN Clients Cannot Access inside LAN
I have been asked to set up remote access VPN on an ASA 5505 that I previously had no invlovement with. I have set it up the VPN using the wizard, they way I normally do, but the clients have no access to anything in the inside subnet, not even the inside interface IP address of the ASA. Thay can ping each other. The remote access policy below that I am working on is labeled VPNPHONE, address pool 172.16.20.1-10. I do not need split tunneling to be enabled. The active WAN interface is the one labeled outside_cable.
: Saved
ASA Version 8.2(1)
hostname ASA5505
domain-name default.domain.invalid
enable password eelnBRz68aYSzHyz encrypted
passwd eelnBRz68aYSzHyz encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.100.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group dataDSL
ip address 76.244.75.57 255.255.255.255 pppoe
interface Vlan3
nameif dmz
security-level 50
ip address 192.168.9.1 255.255.255.0
interface Vlan10
nameif outside_cable
security-level 0
ip address 50.84.96.178 255.255.255.240
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 3
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns server-group DefaultDNS
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Netbios udp
port-object eq 139
port-object eq 445
port-object eq netbios-ns
object-group service Netbios_TCP tcp
port-object eq 445
port-object eq netbios-ssn
object-group network DM_INLINE_NETWORK_1
network-object host 192.168.100.177
network-object host 192.168.100.249
object-group service Web_Services tcp
port-object eq ftp
port-object eq ftp-data
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_10
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_11
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_2
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_3
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_4
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_5
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_6
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_7
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_8
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_9
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network VPN
network-object 192.168.255.0 255.255.255.0
access-list outside_access_in extended permit icmp any host 76.244.75.61
access-list outside_access_in extended permit tcp any host 76.244.75.61 eq ftp
access-list outside_access_in extended permit tcp any host 76.244.75.61 eq ftp-data
access-list outside_access_in extended permit tcp any host 76.244.75.62 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.62 eq https
access-list outside_access_in extended permit tcp any host 76.244.75.59 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.59 eq https
access-list outside_access_in extended permit tcp any host 76.244.75.60 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.60 eq https
access-list outside_access_in extended permit tcp any host 76.244.75.58 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.58 eq https
access-list dmz_access_in remark Quickbooks
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_6 host 192.168.100.5 eq 56719
access-list dmz_access_in remark Quickbooks range
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_7 host 192.168.100.5 range 55333 55337
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_8 host 192.168.100.5 eq 1434
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_9 host 192.168.100.5 eq 49398
access-list dmz_access_in remark QB
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_10 host 192.168.100.5 eq 8019
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_2 host 192.168.100.5 eq 2638
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_11 host 192.168.100.5 object-group Netbios
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_3 host 192.168.100.5 object-group Netbios_TCP
access-list dmz_access_in extended deny ip host 192.168.9.4 host 192.168.100.5 inactive
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_4 any
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_5 any
access-list dmz_access_in remark Printer
access-list dmz_access_in extended permit ip 192.168.9.0 255.255.255.0 object-group DM_INLINE_NETWORK_1
access-list dmz_access_in extended permit tcp 192.168.9.0 255.255.255.0 any object-group Web_Services
access-list dmz_access_in extended permit udp 192.168.9.0 255.255.255.0 any eq domain
access-list dmz_access_in extended permit icmp 192.168.9.0 255.255.255.0 192.168.255.0 255.255.255.0 echo-reply
access-list dmz_access_in extended permit icmp 192.168.9.0 255.255.255.0 192.168.100.0 255.255.255.0 echo-reply log disable
access-list dmz_access_in remark QB probably does not need any udp
access-list dmz_access_in extended permit udp host 192.168.9.4 host 192.168.100.5 eq 55333 inactive
access-list dmz_access_in remark QB included in other rule range
access-list dmz_access_in extended permit tcp host 192.168.9.4 host 192.168.100.5 eq 55333 inactive
access-list dmz_access_in remark May be required for Quickbooks
access-list dmz_access_in extended permit icmp host 192.168.9.4 host 192.168.100.5
access-list CAD_capture extended permit ip host 192.168.9.4 host 192.168.100.5
access-list CAD_capture extended permit ip host 192.168.100.5 host 192.168.9.4
access-list inside_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.240
access-list inside_nat0_outbound extended permit ip any 172.16.10.0 255.255.255.240
access-list inside_nat0_outbound extended permit ip any 172.16.20.0 255.255.255.240
access-list cad_supplies_RAVPN_splitTunnelAcl standard permit 192.168.100.0 255.255.255.0
access-list cad_supplies_RAVPN_splitTunnelAcl standard permit 192.168.9.0 255.255.255.0
access-list dmz_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.0
access-list outside_cable_access_in extended permit icmp any host 50.84.96.182
access-list outside_cable_access_in extended permit tcp any host 50.84.96.182 eq ftp
access-list outside_cable_access_in extended permit tcp any host 50.84.96.182 eq ftp-data
access-list outside_cable_access_in extended permit tcp any host 50.84.96.183 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.183 eq https
access-list outside_cable_access_in extended permit tcp any host 50.84.96.180 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.180 eq https
access-list outside_cable_access_in extended permit tcp any host 50.84.96.181 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.181 eq https
access-list outside_cable_access_in extended permit tcp any host 50.84.96.179 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.179 eq https
access-list Local_LAN_Access standard permit host 0.0.0.0
access-list vpnusers_spitTunnelACL extended permit ip 192.168.100.0 255.255.255.0 any
access-list nonat-in extended permit ip 192.168.100.0 255.255.255.0 172.16.20.0 255.255.255.0
pager lines 24
logging enable
logging buffered informational
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
mtu outside_cable 1500
ip local pool VPN_IP_range 192.168.255.1-192.168.255.10 mask 255.255.255.0
ip local pool VPN_Phone 172.16.20.1-172.16.20.10 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat-control
global (outside) 10 interface
global (outside_cable) 10 interface
nat (inside) 0 access-list nonat-in
nat (inside) 10 0.0.0.0 0.0.0.0
nat (dmz) 0 access-list dmz_nat0_outbound
nat (dmz) 10 0.0.0.0 0.0.0.0
static (inside,outside) 76.244.75.62 192.168.100.25 netmask 255.255.255.255 dns
static (dmz,outside) 76.244.75.61 192.168.9.123 netmask 255.255.255.255 dns
static (dmz,outside) 76.244.75.59 192.168.9.124 netmask 255.255.255.255 dns
static (dmz,outside) 76.244.75.58 192.168.9.4 netmask 255.255.255.255 dns
static (inside,dmz) 192.168.100.0 192.168.100.0 netmask 255.255.255.0
static (dmz,outside) 76.244.75.60 192.168.9.10 netmask 255.255.255.255 dns
static (inside,outside_cable) 50.84.96.183 192.168.100.25 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.182 192.168.9.123 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.180 192.168.9.124 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.179 192.168.9.4 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.181 192.168.9.10 netmask 255.255.255.255 dns
access-group outside_access_in in interface outside
access-group dmz_access_in in interface dmz
access-group outside_cable_access_in in interface outside_cable
route outside_cable 0.0.0.0 0.0.0.0 50.84.96.177 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.100.0 255.255.255.0 inside
http 204.107.173.0 255.255.255.0 outside
http 204.107.173.0 255.255.255.0 outside_cable
http 0.0.0.0 0.0.0.0 outside_cable
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_cable_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_cable_map interface outside_cable
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp enable outside_cable
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet 192.168.100.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.100.0 255.255.255.0 inside
ssh 204.107.173.0 255.255.255.0 outside
ssh 204.107.173.0 255.255.255.0 outside_cable
ssh 0.0.0.0 0.0.0.0 outside_cable
ssh timeout 15
console timeout 0
vpdn group dataDSL request dialout pppoe
vpdn group dataDSL localname [email protected]
vpdn group dataDSL ppp authentication pap
vpdn username [email protected] password *********
dhcpd address 192.168.100.30-192.168.100.99 inside
dhcpd dns 192.168.100.5 68.94.156.1 interface inside
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 192.168.100.5
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy cad_supplies_RAVPN internal
group-policy cad_supplies_RAVPN attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value cad_supplies_RAVPN_splitTunnelAcl
group-policy VPNPHONE internal
group-policy VPNPHONE attributes
dns-server value 192.168.100.5
vpn-tunnel-protocol IPSec
split-tunnel-policy excludespecified
split-tunnel-network-list value Local_LAN_Access
client-firewall none
client-access-rule none
username swinc password BlhBNWfh7XoeHcQC encrypted
username swinc attributes
vpn-group-policy cad_supplies_RAVPN
username meredithp password L3lRjzwb7TnwOyZ1 encrypted
username meredithp attributes
vpn-group-policy cad_supplies_RAVPN
service-type remote-access
username ipphone1 password LOjpmeIOshVdCSOU encrypted privilege 0
username ipphone1 attributes
vpn-group-policy VPNPHONE
username ipphone2 password LOjpmeIOshVdCSOU encrypted privilege 0
username ipphone2 attributes
vpn-group-policy VPNPHONE
username ipphone3 password LOjpmeIOshVdCSOU encrypted privilege 0
username ipphone3 attributes
vpn-group-policy VPNPHONE
username oethera password WKJxJq7L6wmktFNt encrypted
username oethera attributes
vpn-group-policy cad_supplies_RAVPN
service-type remote-access
username markh password nqH+bk6vj0fR83ai0SAxkg== nt-encrypted
username markh attributes
vpn-group-policy cad_supplies_RAVPN
tunnel-group DefaultRAGroup general-attributes
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group cad_supplies_RAVPN type remote-access
tunnel-group cad_supplies_RAVPN general-attributes
address-pool VPN_IP_range
default-group-policy cad_supplies_RAVPN
tunnel-group cad_supplies_RAVPN ipsec-attributes
pre-shared-key *
tunnel-group VPNPHONE type remote-access
tunnel-group VPNPHONE general-attributes
address-pool VPN_Phone
default-group-policy VPNPHONE
tunnel-group VPNPHONE ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 1500
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:8b25ecc61861a2baa6d2556a3679cc7c
: endHi,
You have your "group-policy" set so that you have excluding some networks from being tunneled.
In this access-list named Local_LAN_Access you specify "0.0.0.0"
Doesnt this mean you are excluding all networks from being tunneled? In other words no traffic goes to your tunnel.
This access-list should only contain your local LAN network from where you are connecting with the VPN Client. If you dont need to access anything on your local LAN while having the VPN on, you don't even need this setting on. You could just tunnel all traffic instead of excluding some networks.
- Jouni -
Dear Sir,
I have a windows 2003 server and an ASA 5512
I'm trying to use SSLVPN and it was all working, and I don't believe any configs on either box have been changed.
On Friday people were connecting, but now I get a message "Login Error" in the browser.
In the ASDM home 'latest ADSM Syslog Messsages' I get "AAA authentication server not accessible", followed by two messsages
AAA Marking LDAP server in group as FAILED
AAA Marking LDAP server in group as ACTIVE
When I go to configuration --> Remote Access VPN --> AAA/Local Users AAA server groups and click on my RADIUS server and click Test, it takes a while and says ERROR: AD agent Server not responding: No error
If I stop my IAS server on my Windows box i get the same error but much more quickly.
I have a sonciwall set up doing the same thing, and RADIUS seems to work happily, so I don't think it's the server config...
Do you have any ideas what may have changed?
Thanks
DaveDear Jennifer, I'm using IAS (windows RADIUS server) it was working fine, and I'm not aware anything changed...
when i 'test' the aaa server it says ERROR: AD-agent server not responding: No Error
I have an old sonicwall firewall doing the same thing and it tests successful, implying RADIUS is working OK, if you want a screenshor?
dynamic-access-policy-record DfltAccessPolicy
aaa-server tethys protocol radius
ad-agent-mode
aaa-server tethys (inside) host 10.11.1.10
timeout 5
key *****
radius-common-pw *****
aaa-server tethysLDAP protocol ldap
aaa-server tethysLDAP (inside) host 10.11.1.10
ldap-base-dn DC=tethys,DC=net
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=SSLVPNAdmin,CN=Users,DC=tethys, DC=net
server-type microsoft
no user-identity enable
user-identity default-domain LOCAL
aaa authentication ssh console tethys LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.11.1.73 255.255.255.255 inside
http 10.11.1.10 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ca trustpoint ASDM_TrustPoint0
crl configure
crypto ca trustpoint ASDM_TrustPoint1
crl configure
crypto ca trustpoint ASDM_TrustPoint2
crl configure
crypto ca trustpoint ASDM_TrustPoint3
keypair ASDM_TrustPoint3
crl configure
crypto ca certificate chain ASDM_TrustPoint3
certificate ca 0400000000012f4ee14143
3082045a 30820342 a0030201 02020b04 00000000 012f4ee1 4143300d 06092a86
de36bf03 04003df9 ef9ea967 a4f4863e 2397b82a 71e2edfe 698867bf 265c
quit
certificate 112119e126c272d2d5aabd8bb4a6f90fe78b
308204f3 308203db a0030201 02021211 2119e126 c272d2d5 aabd8bb4 a6f90fe7
a07c90b2 5e4c1b59 56bec070 d5a77145 5b74297f 68c7d6
quit
crypto ikev2 remote-access trustpoint ASDM_TrustPoint3
telnet 10.11.1.10 255.255.255.255 inside
telnet 10.14.1.0 255.255.255.0 inside
telnet timeout 5
ssh 10.11.1.10 255.255.255.255 inside
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
Result of the command: "sh aaa-server protocol ldap"
Server Group: tethysLDAP
Server Protocol: ldap
Server Address: 10.11.1.10
Server port: 0
Server status: ACTIVE, Last transaction at unknown
Number of pending requests 0
Average round trip time 0ms
Number of authentication requests 205
Number of authorization requests 1
Number of accounting requests 0
Number of retransmissions 0
Number of accepts 0
Number of rejects 0
Number of challenges 0
Number of malformed responses 0
Number of bad authenticators 0
Number of timeouts 206
Number of unrecognized responses 0 -
Remote Access VPN - Unable to Access LAN / Inside Network
Hi,
I am facing a problem with Cisco ASA remote access VPN, the remote client is connected to VPN and receiving IP address but the client is not able to ping or telnet any internal network.
I have attached running configuration for your reference. Please let me know I miss any configuartion.
FW : ASA5510
Version : 8.0
Note : Site to Site VPN is working without any issues
Thanks
JamalHi,
Very nice network diagram
Are you saying that originally the VPN Client user is behind the Jeddah ASA?
If this is true wouldnt it be wiser to just use the already existing L2L VPN between these sites?
In real situation I think the VPN Client would only be needed when you are outside either Head Quarter or Jeddah Network. And since you tested it infront of the ASA and it worked there shouldnt be any problem.
Now to the reason why the VPN Client isnt working from behind the Jeddah ASA.
Can you check that the following configuration is found on the Jeddah ASA (Depending on the software level of the ASA the format of the command might change. I'm not 100% sure)
isakmp nat-traversal To enable NAT traversal globally, check that ISAKMP is enabled (you can enable it with the isakmp enable command) in global configuration mode and then use the isakmp nat-traversal command. If you have enabled NAT traversal, you can disable it with the no form of this command.
isakmp nat-traversal natkeepalive
no isakmp nat-traversal natkeepalive
Syntax Description
natkeepalive
Sets the NAT keep alive interval, from 10 to 3600 seconds. The default is 20 seconds.
Defaults
By default, NAT traversal (isakmp nat-traversal) is disabled.
Command Modes
The following table shows the modes in which you can enter the command:
Command Mode
Firewall Mode
Security Context
Routed
Transparent
Single
Multiple
Context
System
Global configuration
Command History
Release
Modification
Preexisting
This command was preexisting.
7.2(1)
This command was deprecated. The crypto isakmp nat-traversal command replaces it.
Usage Guidelines Network Address Translation (NAT), including Port Address Translation (PAT), is used in many networks where IPSec is also used, but there are a number of incompatibilities that prevent IPSec packets from successfully traversing NAT devices. NAT traversal enables ESP packets to pass through one or more NAT devices.
The security appliance supports NAT traversal as described by Version 2 and Version 3 of the IETF "UDP Encapsulation of IPsec Packets" draft, available at http://www.ietf.org/html.charters/ipsec-charter.html, and NAT traversal is supported for both dynamic and static crypto maps.
This command enables NAT-T globally on the security appliance. To disable in a crypto-map entry, use the crypto map set nat-t-disable command.
Examples
The following example, entered in global configuration mode, enables ISAKMP and then enables NAT traversal with an interval of 30 seconds:
hostname(config)# isakmp enable
hostname(config)# isakmp nat-traversal 30
- Jouni -
ASA Remote Access VPN Clients - Multiple DNS Suffixes?
Hi community!
I am setting up a new remote access VPN using the traditional IPSec client via ASA 5515-X runnning OS 8.6.1(5).
We require to provide each client multiple DNS suffixes, but are only to provide a single DNS suffix in the grouip policy.
I have tested using an external DHCP server, but using our Windows Server 2008 infrastructure and Option 119 the list is not provided to clients, and I have read that Windows 7 clietns may ignore this option anyway.
Other than umanually configuring the clients , does anybody have any other suggestions on how we may get this to work?
Full marks for helpful posts!
Kind regards, Ash.Hi
I am looking into the same issue, and I am finding conflicting documentation about this and wondered if you got the answers you were looking for.
I have a remote access requirement for users from separate AD's to authenticate through an ASA.
I was reading about Global Catalogue Server but this is not specifically what I want; and also creating a new AAA server group but the user would need to accept which group to use when they log in
Regards -
Remote access VPN-unable to connect inside-URGENT
Hi,
I have configured Remote access VPN in cisco ASA 5520.Whenever I am trying to connect from outside it's connecting fine.It aslo getting IP from pool but prob is i am unable to connect/ping inside nw.
Pls help me...how to resolve this issue.I had the same problem on an IOS router (871). My solution was one of two things. I downloaded the most up-to-date version of the VPN client (5.0.02.90) as opposed to the version I had or it was a software firewall (Norton 360). I have two different computers. One works just fine...the other connects but no traffic passes through. Here is what I have:
Computer 1 (working)- VPN Client v5.0.02.0090 and Network Associates Enterprise VirusScan.
Computer 2 (not working) - VPN Client v5.0.00.0340 and Norton 360.
I highly doubt it is the VPN Client, but sometimes you never know. Check your software firewall and try disabling it. Let me know how this works. -
Problem with Remote Access VPN on ASA 5505
I am currently having an issue configuring an ASA 5505 to connect via remote access VPN using the Cisco VPN Client 5.0.07.0440 running on Windows 8 Pro x64. The VPN client prompts for the username and password during the connect process, but fails soon after.
The VPN client logs are as follows:
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.2.9200
2 15:09:21.240 12/11/12 Sev=Info/4 CM/0x63100002
Begin connection process
3 15:09:21.287 12/11/12 Sev=Info/4 CM/0x63100004
Establish secure connection
4 15:09:21.287 12/11/12 Sev=Info/4 CM/0x63100024
Attempt connection with server "**.**.***.***"
5 15:09:21.287 12/11/12 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with **.**.***.***.
6 15:09:21.287 12/11/12 Sev=Info/4 IKE/0x63000001
Starting IKE Phase 1 Negotiation
7 15:09:21.303 12/11/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to **.**.***.***
8 15:09:21.365 12/11/12 Sev=Info/6 GUI/0x63B00012
Authentication request attributes is 6h.
9 15:09:21.334 12/11/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = **.**.***.***
10 15:09:21.334 12/11/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, KE, NON, ID, HASH, VID(Unity), VID(Xauth), VID(dpd), VID(Nat-T), NAT-D, NAT-D, VID(Frag), VID(?)) from **.**.***.***
11 15:09:21.334 12/11/12 Sev=Info/5 IKE/0x63000001
Peer is a Cisco-Unity compliant peer
12 15:09:21.334 12/11/12 Sev=Info/5 IKE/0x63000001
Peer supports XAUTH
13 15:09:21.334 12/11/12 Sev=Info/5 IKE/0x63000001
Peer supports DPD
14 15:09:21.334 12/11/12 Sev=Info/5 IKE/0x63000001
Peer supports NAT-T
15 15:09:21.334 12/11/12 Sev=Info/5 IKE/0x63000001
Peer supports IKE fragmentation payloads
16 15:09:21.334 12/11/12 Sev=Info/6 IKE/0x63000001
IOS Vendor ID Contruction successful
17 15:09:21.334 12/11/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, NAT-D, NAT-D, VID(?), VID(Unity)) to **.**.***.***
18 15:09:21.334 12/11/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
19 15:09:21.334 12/11/12 Sev=Info/4 IKE/0x63000083
IKE Port in use - Local Port = 0xFBCE, Remote Port = 0x1194
20 15:09:21.334 12/11/12 Sev=Info/5 IKE/0x63000072
Automatic NAT Detection Status:
Remote end is NOT behind a NAT device
This end IS behind a NAT device
21 15:09:21.334 12/11/12 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
22 15:09:21.365 12/11/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = **.**.***.***
23 15:09:21.365 12/11/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from **.**.***.***
24 15:09:21.365 12/11/12 Sev=Info/4 CM/0x63100015
Launch xAuth application
25 15:09:21.474 12/11/12 Sev=Info/4 IPSEC/0x63700008
IPSec driver successfully started
26 15:09:21.474 12/11/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
27 15:09:27.319 12/11/12 Sev=Info/4 CM/0x63100017
xAuth application returned
28 15:09:27.319 12/11/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to **.**.***.***
29 15:09:27.365 12/11/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = **.**.***.***
30 15:09:27.365 12/11/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from **.**.***.***
31 15:09:27.365 12/11/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to **.**.***.***
32 15:09:27.365 12/11/12 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system
33 15:09:27.365 12/11/12 Sev=Info/5 IKE/0x6300005E
Client sending a firewall request to concentrator
34 15:09:27.365 12/11/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to **.**.***.***
35 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = **.**.***.***
36 15:09:27.397 12/11/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from **.**.***.***
37 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 192.168.2.70
38 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK: , value = 255.255.255.0
39 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(1): , value = 192.168.2.1
40 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(2): , value = 8.8.8.8
41 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD: , value = 0x00000001
42 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN: , value = NCHCO
43 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS: , value = 0x00000000
44 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc ASA5505 Version 8.2(5) built by builders on Fri 20-May-11 16:00
45 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT: , value = 0x00000001
46 15:09:27.397 12/11/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = Received and using NAT-T port number , value = 0x00001194
47 15:09:27.397 12/11/12 Sev=Info/4 CM/0x63100019
Mode Config data received
48 15:09:27.412 12/11/12 Sev=Info/4 IKE/0x63000056
Received a key request from Driver: Local IP = 192.168.2.70, GW IP = **.**.***.***, Remote IP = 0.0.0.0
49 15:09:27.412 12/11/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to **.**.***.***
50 15:09:27.444 12/11/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = **.**.***.***
51 15:09:27.444 12/11/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from **.**.***.***
52 15:09:27.444 12/11/12 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 86400 seconds
53 15:09:27.444 12/11/12 Sev=Info/5 IKE/0x63000047
This SA has already been alive for 6 seconds, setting expiry to 86394 seconds from now
54 15:09:27.459 12/11/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = **.**.***.***
55 15:09:27.459 12/11/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:NO_PROPOSAL_CHOSEN) from **.**.***.***
56 15:09:27.459 12/11/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, DEL) to **.**.***.***
57 15:09:27.459 12/11/12 Sev=Info/4 IKE/0x63000049
Discarding IPsec SA negotiation, MsgID=CE99A8A8
58 15:09:27.459 12/11/12 Sev=Info/4 IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=A3A341F1C7606AD5 R_Cookie=F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED
59 15:09:27.459 12/11/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = **.**.***.***
60 15:09:27.459 12/11/12 Sev=Info/4 IKE/0x63000058
Received an ISAKMP message for a non-active SA, I_Cookie=A3A341F1C7606AD5 R_Cookie=F1F403018625E924
61 15:09:27.459 12/11/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(Dropped) from **.**.***.***
62 15:09:27.490 12/11/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
63 15:09:30.475 12/11/12 Sev=Info/4 IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=A3A341F1C7606AD5 R_Cookie=F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED
64 15:09:30.475 12/11/12 Sev=Info/4 CM/0x63100012
Phase 1 SA deleted before first Phase 2 SA is up cause by "DEL_REASON_IKE_NEG_FAILED". 0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
65 15:09:30.475 12/11/12 Sev=Info/5 CM/0x63100025
Initializing CVPNDrv
66 15:09:30.475 12/11/12 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 0.
67 15:09:30.475 12/11/12 Sev=Info/4 IKE/0x63000001
IKE received signal to terminate VPN connection
68 15:09:30.475 12/11/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
69 15:09:30.475 12/11/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
70 15:09:30.475 12/11/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
71 15:09:30.475 12/11/12 Sev=Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
The running configuration is as follows (there is a site-to-site VPN set up as well to another ASA 5505, but that is working flawlessly):
: Saved
ASA Version 8.2(5)
hostname NCHCO
enable password hTjwXz/V8EuTw9p9 encrypted
passwd hTjwXz/V8EuTw9p9 encrypted
names
name 192.168.2.0 NCHCO description City Offices
name 192.168.2.80 VPN_End
name 192.168.2.70 VPN_Start
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address **.**.***.*** 255.255.255.248
boot system disk0:/asa825-k8.bin
ftp mode passive
access-list outside_nat0_outbound extended permit ip NCHCO 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip NCHCO 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.2.64 255.255.255.224
access-list outside_1_cryptomap extended permit ip NCHCO 255.255.255.0 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap_1 extended permit ip NCHCO 255.255.255.0 192.168.1.0 255.255.255.0
access-list LAN_Access standard permit NCHCO 255.255.255.0
access-list LAN_Access standard permit 0.0.0.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPN_Pool VPN_Start-VPN_End mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (outside) 0 access-list outside_nat0_outbound
route outside 0.0.0.0 0.0.0.0 74.219.208.49 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
network-acl outside_nat0_outbound
webvpn
svc ask enable default svc
http server enable
http 192.168.1.0 255.255.255.0 inside
http **.**.***.*** 255.255.255.255 outside
http 74.218.158.238 255.255.255.255 outside
http NCHCO 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set l2tp-transform esp-3des esp-sha-hmac
crypto ipsec transform-set l2tp-transform mode transport
crypto ipsec transform-set vpn-transform esp-aes-256 esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map dyn-map 10 set pfs group1
crypto dynamic-map dyn-map 10 set transform-set l2tp-transform vpn-transform
crypto dynamic-map dyn-map 10 set reverse-route
crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_3DES_MD5
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs group1
crypto map outside_map 1 set peer 74.219.208.50
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map 20 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto map vpn-map 1 match address outside_1_cryptomap_1
crypto map vpn-map 1 set pfs group1
crypto map vpn-map 1 set peer 74.219.208.50
crypto map vpn-map 1 set transform-set ESP-3DES-SHA
crypto map vpn-map 10 ipsec-isakmp dynamic dyn-map
crypto isakmp identity address
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 15
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 35
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp ipsec-over-tcp port 10000
client-update enable
telnet 192.168.1.0 255.255.255.0 inside
telnet NCHCO 255.255.255.0 inside
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh NCHCO 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd address 192.168.2.150-192.168.2.225 inside
dhcpd dns 216.68.4.10 216.68.5.10 interface inside
dhcpd lease 64000 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 192.168.2.1
vpn-tunnel-protocol IPSec l2tp-ipsec
default-domain value nchco.local
group-policy DfltGrpPolicy attributes
dns-server value 192.168.2.1
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
password-storage enable
ipsec-udp enable
intercept-dhcp 255.255.255.0 enable
address-pools value VPN_Pool
group-policy NCHVPN internal
group-policy NCHVPN attributes
dns-server value 192.168.2.1 8.8.8.8
vpn-tunnel-protocol IPSec l2tp-ipsec
default-domain value NCHCO
username admin password LbMiJuAJjDaFb2uw encrypted privilege 15
username 8njferg password yB1lHEVmHZGj5C2Z encrypted privilege 15
username NCHvpn99 password QhZZtJfwbnowceB7 encrypted
tunnel-group DefaultRAGroup general-attributes
address-pool (inside) VPN_Pool
address-pool VPN_Pool
authentication-server-group (inside) LOCAL
authentication-server-group (outside) LOCAL
authorization-server-group LOCAL
authorization-server-group (inside) LOCAL
authorization-server-group (outside) LOCAL
default-group-policy DefaultRAGroup
strip-realm
strip-group
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *****
peer-id-validate nocheck
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
no authentication ms-chap-v1
authentication ms-chap-v2
tunnel-group DefaultWEBVPNGroup ppp-attributes
authentication pap
authentication ms-chap-v2
tunnel-group 74.219.208.50 type ipsec-l2l
tunnel-group 74.219.208.50 ipsec-attributes
pre-shared-key *****
tunnel-group NCHVPN type remote-access
tunnel-group NCHVPN general-attributes
address-pool VPN_Pool
default-group-policy NCHVPN
tunnel-group NCHVPN ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:15852745977ff159ba808c4a4feb61fa
: end
asdm image disk0:/asdm-645.bin
asdm location VPN_Start 255.255.255.255 inside
asdm location VPN_End 255.255.255.255 inside
no asdm history enable
Anyone have any idea why this is happening?
Thanks!Thanks again for your reply, and sorry about the late response, havent gotten back to this issue until just now. I applied the above command as you specified, and unfortunately, it did not resolve the problem. Below are the logs from the VPN Client for the connection + attempted browsing of a network share that is behind the ASA, and the new running configuration.
VPN Client Log:
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.2.9200
331 13:11:41.362 12/17/12 Sev=Info/4 CM/0x63100002
Begin connection process
332 13:11:41.362 12/17/12 Sev=Info/4 CM/0x63100004
Establish secure connection
333 13:11:41.362 12/17/12 Sev=Info/4 CM/0x63100024
Attempt connection with server "69.61.228.178"
334 13:11:41.362 12/17/12 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with 69.61.228.178.
335 13:11:41.362 12/17/12 Sev=Info/4 IKE/0x63000001
Starting IKE Phase 1 Negotiation
336 13:11:41.424 12/17/12 Sev=Info/6 GUI/0x63B00012
Authentication request attributes is 6h.
337 13:11:41.362 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 69.61.228.178
338 13:11:41.393 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
339 13:11:41.393 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, KE, NON, ID, HASH, VID(Unity), VID(Xauth), VID(dpd), VID(Nat-T), NAT-D, NAT-D, VID(Frag), VID(?)) from 69.61.228.178
340 13:11:41.393 12/17/12 Sev=Info/5 IKE/0x63000001
Peer is a Cisco-Unity compliant peer
341 13:11:41.393 12/17/12 Sev=Info/5 IKE/0x63000001
Peer supports XAUTH
342 13:11:41.393 12/17/12 Sev=Info/5 IKE/0x63000001
Peer supports DPD
343 13:11:41.393 12/17/12 Sev=Info/5 IKE/0x63000001
Peer supports NAT-T
344 13:11:41.393 12/17/12 Sev=Info/5 IKE/0x63000001
Peer supports IKE fragmentation payloads
345 13:11:41.393 12/17/12 Sev=Info/6 IKE/0x63000001
IOS Vendor ID Contruction successful
346 13:11:41.393 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, NAT-D, NAT-D, VID(?), VID(Unity)) to 69.61.228.178
347 13:11:41.393 12/17/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
348 13:11:41.393 12/17/12 Sev=Info/4 IKE/0x63000083
IKE Port in use - Local Port = 0xD271, Remote Port = 0x1194
349 13:11:41.393 12/17/12 Sev=Info/5 IKE/0x63000072
Automatic NAT Detection Status:
Remote end is NOT behind a NAT device
This end IS behind a NAT device
350 13:11:41.393 12/17/12 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
351 13:11:41.424 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
352 13:11:41.424 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 69.61.228.178
353 13:11:41.424 12/17/12 Sev=Info/4 CM/0x63100015
Launch xAuth application
354 13:11:41.424 12/17/12 Sev=Info/4 CM/0x63100017
xAuth application returned
355 13:11:41.424 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 69.61.228.178
356 13:11:41.456 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
357 13:11:41.456 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 69.61.228.178
358 13:11:41.456 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 69.61.228.178
359 13:11:41.456 12/17/12 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system
360 13:11:41.456 12/17/12 Sev=Info/5 IKE/0x6300005E
Client sending a firewall request to concentrator
361 13:11:41.456 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 69.61.228.178
362 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
363 13:11:41.502 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 69.61.228.178
364 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 192.168.2.70
365 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK: , value = 255.255.255.0
366 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(1): , value = 192.168.2.1
367 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(2): , value = 8.8.8.8
368 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD: , value = 0x00000001
369 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets), value = 0x00000001
370 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x6300000F
SPLIT_NET #1
subnet = 192.168.2.0
mask = 255.255.255.0
protocol = 0
src port = 0
dest port=0
371 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN: , value = NCHCO.local
372 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS: , value = 0x00000000
373 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc ASA5505 Version 8.4(1) built by builders on Mon 31-Jan-11 02:11
374 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT: , value = 0x00000001
375 13:11:41.502 12/17/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = Received and using NAT-T port number , value = 0x00001194
376 13:11:41.502 12/17/12 Sev=Info/4 CM/0x63100019
Mode Config data received
377 13:11:41.502 12/17/12 Sev=Info/4 IKE/0x63000056
Received a key request from Driver: Local IP = 192.168.2.70, GW IP = 69.61.228.178, Remote IP = 0.0.0.0
378 13:11:41.502 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 69.61.228.178
379 13:11:41.534 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
380 13:11:41.534 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from 69.61.228.178
381 13:11:41.534 12/17/12 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 86400 seconds
382 13:11:41.534 12/17/12 Sev=Info/5 IKE/0x63000047
This SA has already been alive for 0 seconds, setting expiry to 86400 seconds from now
383 13:11:41.549 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
384 13:11:41.549 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK QM *(HASH, SA, NON, ID, ID, NOTIFY:STATUS_RESP_LIFETIME) from 69.61.228.178
385 13:11:41.549 12/17/12 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 28800 seconds
386 13:11:41.549 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH) to 69.61.228.178
387 13:11:41.549 12/17/12 Sev=Info/5 IKE/0x63000059
Loading IPsec SA (MsgID=C4F5B5A6 OUTBOUND SPI = 0xD2DBADEA INBOUND SPI = 0x14762837)
388 13:11:41.549 12/17/12 Sev=Info/5 IKE/0x63000025
Loaded OUTBOUND ESP SPI: 0xD2DBADEA
389 13:11:41.549 12/17/12 Sev=Info/5 IKE/0x63000026
Loaded INBOUND ESP SPI: 0x14762837
390 13:11:41.549 12/17/12 Sev=Info/5 CVPND/0x63400013
Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.162 10
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306
127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306
127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
192.168.1.0 255.255.255.0 192.168.1.162 192.168.1.162 266
192.168.1.162 255.255.255.255 192.168.1.162 192.168.1.162 266
192.168.1.255 255.255.255.255 192.168.1.162 192.168.1.162 266
224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306
224.0.0.0 240.0.0.0 192.168.1.162 192.168.1.162 266
255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
255.255.255.255 255.255.255.255 192.168.1.162 192.168.1.162 266
391 13:11:41.877 12/17/12 Sev=Info/6 CVPND/0x63400001
Launch VAInst64 to control IPSec Virtual Adapter
392 13:11:43.455 12/17/12 Sev=Info/4 CM/0x63100034
The Virtual Adapter was enabled:
IP=192.168.2.70/255.255.255.0
DNS=192.168.2.1,8.8.8.8
WINS=0.0.0.0,0.0.0.0
Domain=NCHCO.local
Split DNS Names=
393 13:11:43.455 12/17/12 Sev=Info/5 CVPND/0x63400013
Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.162 10
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306
127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306
127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
192.168.1.0 255.255.255.0 192.168.1.162 192.168.1.162 266
192.168.1.162 255.255.255.255 192.168.1.162 192.168.1.162 266
192.168.1.255 255.255.255.255 192.168.1.162 192.168.1.162 266
224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306
224.0.0.0 240.0.0.0 192.168.1.162 192.168.1.162 266
224.0.0.0 240.0.0.0 0.0.0.0 0.0.0.0 266
255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
255.255.255.255 255.255.255.255 192.168.1.162 192.168.1.162 266
255.255.255.255 255.255.255.255 0.0.0.0 0.0.0.0 266
394 13:11:47.517 12/17/12 Sev=Info/4 CM/0x63100038
Successfully saved route changes to file.
395 13:11:47.517 12/17/12 Sev=Info/5 CVPND/0x63400013
Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.162 10
69.61.228.178 255.255.255.255 192.168.1.1 192.168.1.162 100
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306
127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306
127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
192.168.1.0 255.255.255.0 192.168.1.162 192.168.1.162 266
192.168.1.2 255.255.255.255 192.168.1.162 192.168.1.162 100
192.168.1.162 255.255.255.255 192.168.1.162 192.168.1.162 266
192.168.1.255 255.255.255.255 192.168.1.162 192.168.1.162 266
192.168.2.0 255.255.255.0 192.168.2.70 192.168.2.70 266
192.168.2.0 255.255.255.0 192.168.2.1 192.168.2.70 100
192.168.2.70 255.255.255.255 192.168.2.70 192.168.2.70 266
192.168.2.255 255.255.255.255 192.168.2.70 192.168.2.70 266
224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306
224.0.0.0 240.0.0.0 192.168.1.162 192.168.1.162 266
224.0.0.0 240.0.0.0 192.168.2.70 192.168.2.70 266
255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
255.255.255.255 255.255.255.255 192.168.1.162 192.168.1.162 266
255.255.255.255 255.255.255.255 192.168.2.70 192.168.2.70 266
396 13:11:47.517 12/17/12 Sev=Info/6 CM/0x63100036
The routing table was updated for the Virtual Adapter
397 13:11:47.517 12/17/12 Sev=Info/4 CM/0x6310001A
One secure connection established
398 13:11:47.517 12/17/12 Sev=Info/4 CM/0x6310003B
Address watch added for 192.168.1.162. Current hostname: MATT-PC, Current address(es): 192.168.2.70, 192.168.1.162.
399 13:11:47.517 12/17/12 Sev=Info/4 CM/0x6310003B
Address watch added for 192.168.2.70. Current hostname: MATT-PC, Current address(es): 192.168.2.70, 192.168.1.162.
400 13:11:47.517 12/17/12 Sev=Info/5 CM/0x63100001
Did not find the Smartcard to watch for removal
401 13:11:47.517 12/17/12 Sev=Info/4 IPSEC/0x63700008
IPSec driver successfully started
402 13:11:47.517 12/17/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
403 13:11:47.517 12/17/12 Sev=Info/6 IPSEC/0x6370002C
Sent 109 packets, 0 were fragmented.
404 13:11:47.517 12/17/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
405 13:11:47.517 12/17/12 Sev=Info/4 IPSEC/0x63700010
Created a new key structure
406 13:11:47.517 12/17/12 Sev=Info/4 IPSEC/0x6370000F
Added key with SPI=0xeaaddbd2 into key list
407 13:11:47.517 12/17/12 Sev=Info/4 IPSEC/0x63700010
Created a new key structure
408 13:11:47.517 12/17/12 Sev=Info/4 IPSEC/0x6370000F
Added key with SPI=0x37287614 into key list
409 13:11:47.517 12/17/12 Sev=Info/4 IPSEC/0x6370002F
Assigned VA private interface addr 192.168.2.70
410 13:11:47.517 12/17/12 Sev=Info/4 IPSEC/0x63700037
Configure public interface: 192.168.1.162. SG: 69.61.228.178
411 13:11:47.517 12/17/12 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 1.
412 13:11:52.688 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to 69.61.228.178
413 13:11:52.688 12/17/12 Sev=Info/6 IKE/0x6300003D
Sending DPD request to 69.61.228.178, our seq# = 2722476009
414 13:11:52.704 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
415 13:11:52.704 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from 69.61.228.178
416 13:11:52.704 12/17/12 Sev=Info/5 IKE/0x63000040
Received DPD ACK from 69.61.228.178, seq# received = 2722476009, seq# expected = 2722476009
417 13:12:03.187 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to 69.61.228.178
418 13:12:03.187 12/17/12 Sev=Info/6 IKE/0x6300003D
Sending DPD request to 69.61.228.178, our seq# = 2722476010
419 13:12:03.202 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
420 13:12:03.202 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from 69.61.228.178
421 13:12:03.202 12/17/12 Sev=Info/5 IKE/0x63000040
Received DPD ACK from 69.61.228.178, seq# received = 2722476010, seq# expected = 2722476010
422 13:12:14.185 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to 69.61.228.178
423 13:12:14.185 12/17/12 Sev=Info/6 IKE/0x6300003D
Sending DPD request to 69.61.228.178, our seq# = 2722476011
424 13:12:14.201 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
425 13:12:14.201 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from 69.61.228.178
426 13:12:14.201 12/17/12 Sev=Info/5 IKE/0x63000040
Received DPD ACK from 69.61.228.178, seq# received = 2722476011, seq# expected = 2722476011
427 13:12:24.762 12/17/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to 69.61.228.178
428 13:12:24.762 12/17/12 Sev=Info/6 IKE/0x6300003D
Sending DPD request to 69.61.228.178, our seq# = 2722476012
429 13:12:24.778 12/17/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 69.61.228.178
430 13:12:24.778 12/17/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from 69.61.228.178
431 13:12:24.778 12/17/12 Sev=Info/5 IKE/0x63000040
Received DPD ACK from 69.61.228.178, seq# received = 2722476012, seq# expected = 2722476012
New running configuration:
: Saved
ASA Version 8.4(1)
hostname NCHCO
enable password hTjwXz/V8EuTw9p9 encrypted
passwd hTjwXz/V8EuTw9p9 encrypted
names
name 192.168.2.0 NCHCO description City Offices
name 192.168.2.80 VPN_End
name 192.168.2.70 VPN_Start
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 69.61.228.178 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa841-k8.bin
ftp mode passive
object network NCHCO
subnet 192.168.2.0 255.255.255.0
object network obj-192.168.1.0
subnet 192.168.1.0 255.255.255.0
object network obj-192.168.2.64
subnet 192.168.2.64 255.255.255.224
object network obj-0.0.0.0
subnet 0.0.0.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_nat0_outbound extended permit ip object NCHCO 192.168.1.0 255.255.255.0
access-list outside_nat0_outbound extended permit ip object NCHCO 192.168.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip object NCHCO 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.2.64 255.255.255.224
access-list inside_nat0_outbound extended permit ip 0.0.0.0 255.255.255.0 192.168.2.64 255.255.255.224
access-list outside_1_cryptomap extended permit ip object NCHCO 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap_1 extended permit ip object NCHCO 192.168.1.0 255.255.255.0
access-list LAN_Access standard permit 192.168.2.0 255.255.255.0
access-list LAN_Access standard permit 0.0.0.0 255.255.255.0
access-list NCHCO_splitTunnelAcl_1 standard permit 192.168.2.0 255.255.255.0
access-list AnyConnect_Client_Local_Print extended deny ip any any
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq lpd
access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq 631
access-list AnyConnect_Client_Local_Print remark Windows' printing port
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
access-list AnyConnect_Client_Local_Print extended permit udp any host 224.0.0.251 eq 5353
access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol
access-list AnyConnect_Client_Local_Print extended permit udp any host 224.0.0.252 eq 5355
access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq 137
access-list AnyConnect_Client_Local_Print extended permit udp any any eq netbios-ns
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPN_Pool VPN_Start-VPN_End mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-649.bin
no asdm history enable
arp timeout 14400
nat (inside,any) source static NCHCO NCHCO destination static obj-192.168.1.0 obj-192.168.1.0
nat (inside,any) source static any any destination static obj-192.168.2.64 obj-192.168.2.64
nat (inside,any) source static obj-0.0.0.0 obj-0.0.0.0 destination static obj-192.168.2.64 obj-192.168.2.64
object network obj_any
nat (inside,outside) dynamic interface
route outside 0.0.0.0 0.0.0.0 69.61.228.177 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
network-acl outside_nat0_outbound
webvpn
svc ask enable default svc
http server enable
http 192.168.1.0 255.255.255.0 inside
http 69.61.228.178 255.255.255.255 outside
http 74.218.158.238 255.255.255.255 outside
http NCHCO 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set l2tp-transform esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set l2tp-transform mode transport
crypto ipsec ikev1 transform-set vpn-transform esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_MD5 mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map dyn-map 10 set pfs group1
crypto dynamic-map dyn-map 10 set ikev1 transform-set l2tp-transform vpn-transform
crypto dynamic-map dyn-map 10 set reverse-route
crypto dynamic-map outside_dyn_map 20 set ikev1 transform-set ESP-3DES-SHA
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs group1
crypto map outside_map 1 set peer 74.219.208.50
crypto map outside_map 1 set ikev1 transform-set ESP-3DES-SHA
crypto map outside_map 20 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto map vpn-map 1 match address outside_1_cryptomap_1
crypto map vpn-map 1 set pfs group1
crypto map vpn-map 1 set peer 74.219.208.50
crypto map vpn-map 1 set ikev1 transform-set ESP-3DES-SHA
crypto map vpn-map 10 ipsec-isakmp dynamic dyn-map
crypto isakmp identity address
crypto ikev1 enable inside
crypto ikev1 enable outside
crypto ikev1 ipsec-over-tcp port 10000
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto ikev1 policy 15
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 35
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
client-update enable
telnet 192.168.1.0 255.255.255.0 inside
telnet NCHCO 255.255.255.0 inside
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh NCHCO 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd address 192.168.2.150-192.168.2.225 inside
dhcpd dns 216.68.4.10 216.68.5.10 interface inside
dhcpd lease 64000 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 192.168.2.1
vpn-tunnel-protocol ikev1 l2tp-ipsec
default-domain value nchco.local
group-policy DfltGrpPolicy attributes
dns-server value 192.168.2.1
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client ssl-clientless
password-storage enable
ipsec-udp enable
intercept-dhcp 255.255.255.0 enable
address-pools value VPN_Pool
group-policy NCHCO internal
group-policy NCHCO attributes
dns-server value 192.168.2.1 8.8.8.8
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value NCHCO_splitTunnelAcl_1
default-domain value NCHCO.local
username admin password LbMiJuAJjDaFb2uw encrypted privilege 15
username 8njferg password yB1lHEVmHZGj5C2Z encrypted privilege 15
username NCHvpn99 password dhn.JzttvRmMbHsP encrypted
tunnel-group DefaultRAGroup general-attributes
address-pool (inside) VPN_Pool
address-pool VPN_Pool
authentication-server-group (inside) LOCAL
authentication-server-group (outside) LOCAL
authorization-server-group LOCAL
authorization-server-group (inside) LOCAL
authorization-server-group (outside) LOCAL
default-group-policy DefaultRAGroup
strip-realm
strip-group
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
peer-id-validate nocheck
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
no authentication ms-chap-v1
authentication ms-chap-v2
tunnel-group DefaultWEBVPNGroup ppp-attributes
authentication pap
authentication ms-chap-v2
tunnel-group 74.219.208.50 type ipsec-l2l
tunnel-group 74.219.208.50 ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group NCHCO type remote-access
tunnel-group NCHCO general-attributes
address-pool VPN_Pool
default-group-policy NCHCO
tunnel-group NCHCO ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:b6ce58676b6aaeba48caacbeefea53a5
: end
asdm image disk0:/asdm-649.bin
asdm location VPN_Start 255.255.255.255 inside
asdm location VPN_End 255.255.255.255 inside
no asdm history enable
I'm at a loss myself as to why this isn't working, and i'm sure that you are running out of solutions yourself. Any other ideas? I really need to get this working.
Thanks so much!
Matthew -
Remote Access VPN authentication through RADIUS
Hi,
I have configured remote access VPN (IPsec) in my Cisco ASA . Before there was only single username & password to for VPN client. Now I am planning to give access through RADIUS server. I have configured RADIUS server in WIN 2003 server.
Server configuration:
1) Administrative Tools > Internet Authentication Service and right-click on RADIUS Client to add a new RADIUS client with ip address of CISCO ASA (inside interface).
2) Remote Access Policies, right-click on Connections to Other Access Servers, and select Properties.
3) check Grant Remote Access Permissions is selected.Click Edit Profile and check these settings:On the Authentication tab, check Unencrypted authentication (PAP, SPAP), MS-CHAP,and MS-CHAP-v2.ï On the Encryption tab, ensure that the option for No Encryption is selected.Click OK when you are finished.
4.Select Administrative Tools > Computer Management > System Tools > Local Users and Groups, right-click on Users and select New Users to add a user into the local computer account.Add a user and check this profile information:On the General tab, ensure that the option for Password Never Expired is selected instead ofthe option for User Must Change Password.
On the Dial-in tab, select the option for Allow access
ASA configuration:
aaa-server vpn protocol radius
aaa-server vpn host 10.155.20.25 (RADIUS server IP )
key cisco321
tunnel-group vpnacc type ipsec-ra
tunnel-group vpnacc general-attributes
authentication-server-group vpn
but it is not working. Please guide to resolve this issue.
Regards,
somAlso, take a look at your logs on the windows server, and try debugging the asa. Try running wireshark or network monitor on the windows server to see if the requests are coming in. You should be able to figure out pretty quickly what is going on by debugging aaa on the asa and/or checking the logs on the server. Make sure the service is running on the windows box. Make sure that something stupid like windows firewall isnt blocking the connection. You can turn on debugging by typing "debug aaa" and type "logging console debugging" and "term mon". You can test aaa by typing "test aaa-server authentication vpn host x.x.x.x username someusername password somepassword"
Hopefully this will lead you in the right direction. Oh, one more thing, when you are done, don't forget to turn off the debug by typing "undebug all". Another word of warning, running debugs on a production firewall should be done at your own risk, it is very easy to overwhelm a device to the point it stops responding by running debugs. -
Remote Access VPN on Cisco ASA Problem
Hi, i configured Remote access VPN on Cisco ASA 8.x as per below configuration.
Problem is that my internet has stopped working, and default route is just showing stars.
i can ping internal server 10.110.10.150 fine , which i allowed on VPN ACL, but my other traffic not going to regular internet on my laptop,
what additional required to force my internet to go to regular internet instead of getting encrypted?
Also attaching output of route print at the point when VPN is connected.
ip local pool RA_VPN_POOL 10.1.200.100-10.1.200.150 mask 255.255.255.0
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto dynamic-map RA_VPN 65535 set transform-set ESP-AES-128-SHA
crypto dynamic-map RA_VPN 65535 set security-association lifetime seconds 28800
crypto dynamic-map RA_VPN 65535 set security-association lifetime kilobytes 4608000
crypto map VPN_MAP 65535 ipsec-isakmp dynamic RA_VPN
crypto map VPN_MAP interface outside
isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
tunnel-group ITT_RA type remote-access
tunnel-group ITT_RA general-attributes
address-pool RA_VPN_POOL
default-group-policy RA_VPN_GP
tunnel-group ITT_RA ipsec-attributes
pre-shared-key <group key>
group-policy RA_VPN_GP internal
group-policy RA_VPN_GP attributes
dns-server value 10.0.0.1 10.0.0.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_List
default-domain value mydomain.com
address-pools value RA_VPN_POOL
access-list Split_Tunnel_List extended permit ip host 10.110.10.150 10.1.200.0 255.255.255.0
access-list nonattest extended permit ip host 10.110.10.150 10.1.200.0 255.255.255.0
nat (inside) 0 access-list nonattest
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.111.36.1 10.111.36.9 276
0.0.0.0 0.0.0.0 On-link 10.1.200.100 20
10.1.200.0 255.255.255.0 On-link 10.1.200.100 276
10.1.200.100 255.255.255.255 On-link 10.1.200.100 276
10.1.200.255 255.255.255.255 On-link 10.1.200.100 276
10.110.10.150 255.255.255.255 10.1.200.1 10.1.200.100 100
10.111.36.0 255.255.255.0 On-link 10.111.36.9 276Hi, i configured Remote access VPN on Cisco ASA 8.x as per below configuration.
Problem is that my internet has stopped working, and default route is just showing stars.
i can ping internal server 10.110.10.150 fine , which i allowed on VPN ACL, but my other traffic not going to regular internet on my laptop,
what additional required to force my internet to go to regular internet instead of getting encrypted?
Also attaching output of route print at the point when VPN is connected.
ip local pool RA_VPN_POOL 10.1.200.100-10.1.200.150 mask 255.255.255.0
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto dynamic-map RA_VPN 65535 set transform-set ESP-AES-128-SHA
crypto dynamic-map RA_VPN 65535 set security-association lifetime seconds 28800
crypto dynamic-map RA_VPN 65535 set security-association lifetime kilobytes 4608000
crypto map VPN_MAP 65535 ipsec-isakmp dynamic RA_VPN
crypto map VPN_MAP interface outside
isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
tunnel-group ITT_RA type remote-access
tunnel-group ITT_RA general-attributes
address-pool RA_VPN_POOL
default-group-policy RA_VPN_GP
tunnel-group ITT_RA ipsec-attributes
pre-shared-key <group key>
group-policy RA_VPN_GP internal
group-policy RA_VPN_GP attributes
dns-server value 10.0.0.1 10.0.0.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_List
default-domain value mydomain.com
address-pools value RA_VPN_POOL
access-list Split_Tunnel_List extended permit ip host 10.110.10.150 10.1.200.0 255.255.255.0
access-list nonattest extended permit ip host 10.110.10.150 10.1.200.0 255.255.255.0
nat (inside) 0 access-list nonattest
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.111.36.1 10.111.36.9 276
0.0.0.0 0.0.0.0 On-link 10.1.200.100 20
10.1.200.0 255.255.255.0 On-link 10.1.200.100 276
10.1.200.100 255.255.255.255 On-link 10.1.200.100 276
10.1.200.255 255.255.255.255 On-link 10.1.200.100 276
10.110.10.150 255.255.255.255 10.1.200.1 10.1.200.100 100
10.111.36.0 255.255.255.0 On-link 10.111.36.9 276
Maybe you are looking for
-
System crash attempting to use the packet filtering on Solaris 10, MU7
I have been attempting to port my kernel module to run on Solaris 10, MU7 (from MU6). Some changes to the packet filtering hooks interface requires me to make code changes and linker option changes i.e -Nmisc/neti -Nmisc/hook I now have my module loa
-
I need to use Outlook for work and created an alias email account in iCloud which works perfectly. How can I compose a new email using Outlook as the client, and I need to be able to use my alias account as the sender. It was easy to set up in iPhone
-
How to check the EHP level installed in Collection Management
Dear all, How do I know under what EHP my Collections & Dispute Management modules are running?. Another question I want to ask: which EHP contains standard reports to analyse worklists? Thirdly, which is the latest EHP that should be activated to ru
-
Import java class from model package
I have a java class in model package.I create a managed bean in the view package and I want to import the first java class with "import model.class1" but this error "import model.class1 not found" is shown.What should I do?
-
i tried to update mavericks 10.9 to os x yosemite but unfortunately it is was unsuccesfull. it was no any back up before i update. so, here now is the problem i try to install back the mavericks but the computer say "it could not find installation i