Remote App and AppleTV 1st gen.

I loaded myiPhone with the Remote app. I can control iTUnes from my iPhone and play it over my AppletV. However, Ic annot conrol AppleTV with the Remote app on myiPhone. I canot get to the remote control pad. I used to be abel to do this but not now with the new verison. How cna I fix this?

I can, how does your app differ from mine.

Similar Messages

HT4847 Videos on iPad shown as iCloud - stored on iMac and AppleTV (1st Gen)

I have just received an email from Apple notifying me of renewal of iCloud 20gb storage due at end of September 2012.
Sorry about following convoluted description.
Not previously purchased by me but provided on Closure of my MobileMe Family pack service.
I removed all MobileMe photos, documents etc. Mail, contacts, notes etc al transferred across but probably only 250Mb.
Removal of MobileMe service was a retrograde step by Apple in my opinion.
I don't use iTunes Match, Photostream etc so no need for much storage required above the Basic 5Gb.
I do add videos to iTunes which are stored on my Mac, and "synced" to my iPhone, iPad and iPod. I also sync these to AppleTV (1st Gen).
If these are loaded these on to the iPad it appears to backup these to the cloud. If I disable this backup option on the iPad it "deletes" the videos.
Can I store these Videos on to the iPad, iphone and/ or iPod without invoking iCloud backup service?

Just a comment that the issue with Cars 2 may not be the same as the original one at the top of this thread. For starters, the TV programs that I bought are hardly new releases. (They're from the early 60's, and have been available on iTunes for at least a year.) The initial download plays on the linked iMac, but when transferred to the AppleTV fails authorization. Deauthorization of the iMac, reauthorization, and waiting for the content to be transferred back to the AppleTV clears up the issue (and appears to be the only thing that will do so).

AppleTV 1st Gen and new computer

How do I connect AppleTV 1st Gen to different computer than the original laptop that I synced with? The laptop has very little space left and I want to synch with larger desktop. Do I have to disconnect it from laptop some how? The desktop has seen AppleTV, but it won't let me sync anything.

kellyfromnew york wrote:
Thanks for the reply! I copied the iTunes Music folder to a removeable drive so I don't lose any of the info before disconnecting with AppleTV.
It is always wise to have a backup of your itunes library media on external drive etc - you never know when you might have a hardware failure on a computer/AppleTV etc.
Disconnecting AppleTV from the laptop itunes will not delete the content in iTunes on the laptop, but will wipe media synced to AppleTV from iTunes.
The big thing to ensure is that any purchases of music/video etc you made directly on AppleTV have synced back to the sync (laptop) library - right click on the AppleTV in iTunes on the laptop and choose Transfer Purchases to check if unsure. In theory, things that haven't synced back should remain while stuff synced from the computer to AppleTV will go, but I don't fully trust it and best to ensure direct purchases are safe before disconnecting AppleTV.
The important point to get across is that AppleTV 1 does not operate like a backup of media - there is no simple or official way to recover media from it say your laptop iTunes hard drive failed.
kellyfromnew york wrote:
need to put it on the desktop, can I just copy this into the iTunes Music folder on the desktop and it will now have all the appleTV stuff?
Don't do that (just copy into new itunes folder) as iTunes won't recognise the stuff you've copied in this way.
Either import to iTunes using iTunes' File>Add to Library and navigating to the iTunes media folder on the external or drag and drop this folder onto itunes to copy it over.
Another way to do this you might want to try is via Home Sharing - enable in iTunes on the laptop and desktop and this will allow the desktop iTunes to copy stuff over from the laptop - either all or selected content you choose form the Home Shared library icon - this will probably be slower than using the copy on the external drive, but is a good way to copy content from one machine to another across the network.
After adding your media to iTunes you need to go through the steps Winston and I outlined to change the sync computer entry on AppleTV under Settings>Computers.
Ac

Ipod remote app and apple tv sync vs. stream problem

Have been using ATV 1st gen streaming from a shared itunes library for some time.
Now I want to use the ipod remote app and can make it work only if I sync content to the ATV. If I stream content to the ATV, the remote app says there is no content.
However, I can see (on my tv) and play the sync'd content using the white plastic remote.
*Does this mean the remote app works only with synced (not streamed) content on ATV 1st gen?*
(all itunes and ATV software is the latest)
Thank you.

Connect your Remote App to your PC/Mac
Select Song
Select Play
Tap Full Screen icon(Album ARtwork)
Select "AirPlay" button
Selcect your ATV as the only Speaker
This way you can stream content to your ATV
This works with ATV II Aswell
I have both and could not stream FROM ATVII to my MAC/ATV I
But using MAC/PC as source and ATV as speaker makes it work fine with unsynced content

Remote app and home sharing

remote app & home sharing worked on my new iPad (3rd gen) but did not work on my iPhone 4. this went on for a week or so but now both of them (remote app and home sharing) work on my iPhone but stopped working on iPad. I tried re installing itunes to 10.6.1.7 (latest version) with no luck. please help because i prefer using my ipad to control my pc

Be sure that all devices are on the same network.
If apple tv and remote are on same homeshare you should be able to select and control the apple tv from with in the remote app.
If apple tv and the itunes are on the same homeshare the apple tv will see the itunes library (and shared photos) in the computer section.
Additionally if these are all on the same homeshare you should see both the apple tv and the itunes library in the remote app.
hope that helps.

IPhone 4s iOS 6.0.1 and iPad 1st gen. iOS 5.0. What do I need to do?

Wifi connection problem between iPhone 4s iOS 6.0.1 and iPad 1st gen. iOS 5.0. What do I need to do? I've reset the network on each and nothing. Please help.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

AppleTV 1st Gen has my entire music library loaded however my iTunes library was lost when my external hard crashed. My question is can I copy the content from the AppleTV 1st Gen back into my iTunes on my iMac?

AppleTV 1st Gen -
I have a rather complex music/movie library system, as well as the ability to listen/watch the content throughout my house thanks to Control4 - extra vegetables and other various 3rd party equipment. I moved my entire music library onto an external hard drive to free up space on my iMac...then my dog got tangled in the cord and pulled the external drive from my desk to the floor destroying the hard drive...(yes I've already attempted to have the content recovered by specialists- no such luck.
My question is... Is it possible to copy the content from the AppleTV 1st Gen back into my iTunes on my iMac? If so step by step directions would be greatly appreciated!
thanks to all
Tom

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Remote App and Desktop Login Does NOT work

Hello there,
I have an easy one for you all. I am running Windows Server 2012 R2 Datacenter off a server at a university. This server is only intended to be shared with ~10 people doing various tasks like using programs installed and storing data. As
of now, I only have been able to do RDP from home with it. Having tried to setup remote app and desktop, it only works on the server itself and not on other computers, both on the same subnet and a completely different IP address altogether. Let
me break down my questions:
1. Though the security certificate is installed in Trusted Root Authorities, but the site is only trusted on the server and not on any of the other computers. How do I get the others to trust it?
2. Number 1 except this occurs in the Remote Desktop and App window as well.
3. Adding users would be under active directory administrative center-->[my server]-->Users-->Add right? I guess I cannot play with 'User Accounts' in control panel anymore.
Any help would be appreciated. Also, if anyone thinks I am better off doing other things like virtual desktop, then I am all ears. I just want to keep things as simple as possible.
Regards,
Ben

Hi,
Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
Thanks.
Jeremy Wu
TechNet Community Support

Remote App and iTunes not syncing

I'm trying to get the Remote.app and the iTunes DJ to sync so that I can control my computer library from iPod Touch. However, the icon for remote does not appear in the iTunes tray under my iPod in "Devices." How can I fix this?
For starters it is a 2.2 version iPod (volume rocker version) and I have the 3.0 firmware on it. My iTunes is the current 8.2 version. I also already have "Look for iPhone and iPod Touch Remotes" checked in my preferences in iTunes. I do have a wireless connection and both my laptop and iPod are connected to it properly. My iPod was connected before, but accidentally. I removed another computer from the library list and now it won't connect.

Have had the exact same problem since the last iTunes update came through. remote worked just fine before that.

Iphone remote app and itunes

All seemed to be going well until - the updates.
Now my iphone will not recognize my itunes libraries. I deleted the library link from the iPhone remote app and even told itunes to forget all remotes. Back to my iphone to set up as a remote - again. The iphone generates the 4 digit code, itunes even recognizes the iphone, allows me to enter the code, and returns the screen that I can now start using the iphone as a remote. --- Back to the iphone - and the remote app can "find the library" - What gives? Help
<edited by host>

Revelation, do you mean complete restore of the iPhone and all contents thereof? Or the Mac?
I have deleted the application "Remote" from the iPhone, and I have re-installed it. Each time the application will work for a limited time, and then it loses the ability to locate the library.
I continue to suspect IP addresses as the source of the problem, and wonder if the addresses must be static on both devices in order for them to maintain a connection. However, I find it odd that iTunes can register the presence of the iPhone enough to list it in the "devices" pane (therefore, I assume that the two devices are communicating over my network) but then the iPhone fails to locate the iTunes library.
Other applications (Briefcase Lite, for example) seem to be able to conduct over-the-network business without difficulty.

IOS Remote App and ATV2

I cannot get the iOS remote app to connect to my Apple TV2. It connects just fine to the iTunes libraries on my network, but from three different iOS devices I get the same error. The app sees the ATV2 and tries to connect, but fails. The odd thing is, it used to work flawlessly. I hadn't used the app for a month or so and now its not working. I've tried resetting the apple TV (both power cycle and full settings reset) as well as rebooting the router and the iOS devices. I reinstalled the remote app as well. The weird thing is, I can airplay mirror to the ATV2 fine, just the remote app fails. The error message I receive after sitting at the "Connecting to Apple TV" screen is as follows:
"Remote can't connect to your iTunes library. Check your network settings and try again.
I have no idea what changed in my set up, perhaps a software upgrade screwed something up but I'm at a loss I've tried everything. The ATV2 is running 4.4.4, the iOS devices are all up to date running latest remote app.
I Apple TV can access my iTunes libraries fine as well.

Mar 30, 2013 11:31 AM Recently purchased new AirPort Extreme. The wifi network works fine and all is well. The issue is I can not connect my Remote app with iTunes or my Apple TV. - I have rebooted my AP Extreme as well as my AP TV and my PC. - I have logged out of Home Sharing and logged back in. - On my iPad or iPhone I add Library and receive a Passcode, I enter in the PC into iTunes and I receive an error message "The passcode you entered was incorrect. Please try again" I receive this error when entering all my idivices. - I have deleted the Remote App and reinstalled it, but continue to receive the same error message. - All soft ware on all divices are current. - I have diabled my firewall. Who has any ideas? Thanks MacBook Air, iOS 5.1.1

Unable to see Remote App and Desktop Connection in Group Policy Management Editor

I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
RD Gateway
Remote Desktop Connection Client
Remote Desktop Session Host
But NOT
Remote App and Desktop Connection
Which I need. Is there anyway of adding this?

> I am unable to see the Remote App and Desktop Connection in Group Policy
> Management Editor on my 2012 R2 DC. I am therefore not able configure
> the connection URL in Access RemoteApp and desktops in our Windows 8.1
> client environment.
http://gpsearch.azurewebsites.net/#8113
Do you use a central store for ADMX? Is this central store out of date?
(Means "still contains ADMX from W7/2008R2")
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Appletv remote app and airplay not working with iphone 4S

I have the latest appleTV. I have the remote app loaded onto my ipad3 and iphone 4S. The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV. It used to work. I have deleted and reloaded the app, and still nothing. It worked fined until a month ago or so. I have enabled home sharing.
The app and airlplay are working just fine with the ipad3. I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router. I don't think this is the issue, because it worked before.
Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC. Nothing seems happed on the computer when I enter the code. Could this have anything to do with recent appleTV or itunes updates? Any possible solutions?

It seems like I am having the same problem.
I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
(1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
(2) iMac not Airplay to AppleTV
(3) Airplay Mirroring not working
The following are done:
- Home sharing enabled
- To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

Remote App and AppleTV 1st gen.

Similar Messages

Maybe you are looking for