Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Remote App and Desktop Login Does NOT work

Hello there,
I have an easy one for you all. I am running Windows Server 2012 R2 Datacenter off a server at a university. This server is only intended to be shared with ~10 people doing various tasks like using programs installed and storing data. As
of now, I only have been able to do RDP from home with it. Having tried to setup remote app and desktop, it only works on the server itself and not on other computers, both on the same subnet and a completely different IP address altogether. Let
me break down my questions:
1. Though the security certificate is installed in Trusted Root Authorities, but the site is only trusted on the server and not on any of the other computers. How do I get the others to trust it?
2. Number 1 except this occurs in the Remote Desktop and App window as well.
3. Adding users would be under active directory administrative center-->[my server]-->Users-->Add right? I guess I cannot play with 'User Accounts' in control panel anymore.
Any help would be appreciated. Also, if anyone thinks I am better off doing other things like virtual desktop, then I am all ears. I just want to keep things as simple as possible.
Regards,
Ben

Hi,
Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
Thanks.
Jeremy Wu
TechNet Community Support

Unable to see Remote App and Desktop Connection in Group Policy Management Editor

I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
RD Gateway
Remote Desktop Connection Client
Remote Desktop Session Host
But NOT
Remote App and Desktop Connection
Which I need. Is there anyway of adding this?

> I am unable to see the Remote App and Desktop Connection in Group Policy
> Management Editor on my 2012 R2 DC. I am therefore not able configure
> the connection URL in Access RemoteApp and desktops in our Windows 8.1
> client environment.
http://gpsearch.azurewebsites.net/#8113
Do you use a central store for ADMX? Is this central store out of date?
(Means "still contains ADMX from W7/2008R2")
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Remote Desktop Connection Client 9.3.9600 unable to connect to Server 2012 RDS via Gateway

Hi,
I have a Windows Sever 2012 R2 RDS environment with two Gateways servers configured in high availability mode (RD Web Access, RD Gateway, RD Connection Broker roles installed) and four Windows Server 2012 R2 RDS Session Hosts. The servers are all running
the most recent public server updates. With this configuration I when connecting externally using a Windows 7 computer with the older Remote Desktop Connection client (6.1.7601) I am able to connect without any problems however when I try connecting with a
newer client from a computer running Windows 8.1 and the 9.3.9600 client I am unable to connect.
At the moment a NAT rule is configured to pass 80/443 traffic to only one of the RDS gateway servers, I've removed our load balancer from the configuration for the moment to reduce the complexity.
No error is generated by the client when it tries to connect it just stops trying to connect after a while.
On the Gateways servers event logs for
Things I have looked into so far.
- I've double and triple checked the RDS configuration and checked it against one of my other clients configurations that is working and they are identical.
- Connecting from an older client version works fine.
I'm not sure what else can be checked does anyone have any ideas?

Hi,
1. What entries are you seeing in the RD Gateway's log? Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-Gateway
2. How come you are not forwarding UDP port 3391 in addition to TCP port 443? It should work without UDP, but you will not have UDP support which is one of the benefits of RDP 8.0/8.1.
3. Are there any non-default group policy settings being applied to the servers and/or client PCs? To be clear, I'm asking if any changes have been made to the default local and domain security policies, group policy objects, new GPOs that may have
been added, etc., that are applicable to the servers and or client PCs.
-TP

Apple Remote App and iTunes

Hi
I've got the latest software on iTunes and my Remote App for iPhone and iPad. I've noticed from tint to time that when selecting the source in the Remote App (I.e. whether to play music / films etc from iTunes or my AppleTV I notice the icon for iTunes DJ appears (icon is several CDs stacked on each other). This only appears very occasionally and I have no idea what triggers its appearance. I would have though it should appear there all the time.
Anybody have any clues as to what is happening and why?
Thanks

Hi,
I have had and fixed a similar issue;
Setup;
Linksys ADSL router/model (4 port wired and wireless)
LAN Network = 192.168.0.x
Mac Mini wired into the router (on same LAN)
Airport Express wireless (driving my stereo speakers and acting as a wireless client on the same LAN)
Apple iPhone 3GS wireless with Apple Remore app
iTunes 9.blah (last 9.x version before 10 havent upg yet, iTunes all configured to use airtunes, remote speakers and remote app etc)
Now It will all work fine and dandy at first then if i stop itunes (and the remote app disconnects) after a while (5 to 10 mins) the mac goes to sleep to save power.
The mac doesnt wake up again to accept the connection from the remote app.
So I found an apple support article (cant find it now) that suggested that I set the "wake on lan" feature, this wakes the mac and itunes if the mac has slept. Its in the system preferences / energy saver (its something like "wake on lan" or "wake on network")
This fixes it for me.
Cheers

Remote App and shuffling a single album

I'm using iTunes 11.0.1.12 on my PC and Remote App 3.0 (598) on my Touch 5G running iOS 6.0.1, and I want to play an album with its songs shuffled. For example, I go to Artists, choose Steely Dan, then "A Decade Of Steely Dan". There's no obvious way to begin playing, so I press the first song, which begins playing. This takes me to "Up Next", which has all the songs from the album I was on, PLUS 7 songs from the album, "Everything Must Go", also by Steely Dan. This makes no sense at all, but I ignore it for the moment, as shuffling is what's on my mind. The thing is, there's no shuffle button on "Up Next", so I click on the tiny album artwork in the upper right corner, and it takes me to the traditional "Now Playing" screen, with the transport controls and big album artwork in the middle. There I find my shuffle button, so I press it, and it turns blue, so I'm all good, right? Wrong! When the next song begins, it's from some other Steely Dan album chosen at random, like "Katy Lied". When I go back to "Up Next", songs from all my Steely Dan albums now appear. All I wanted was to shuffle the one album "A Decade Of Steely Dan" and play just its songs, but this simple thing doesn't appear to be possible. Am I missing something?

Eliciting the bug requires entry to the album in the Remote App through Artists or Genres. I can leave the "Up Next" list displayed in iTunes on the PC and watch it populate with all the following albums when I do this. However, if I enter the album through Composers or Albums, only that album's tracks go into "Up Next". Unfortunately, using Composers to select albums is not a solution at all; for one thing, I only maintain Composer metadata for classical composers. Using Albums isn't really a solution either, because I like to browse by artist or composer. Interestingly, the Remote App groups albums by artist, but it's a flat list and hard to scroll through because there are so many more albums that artists, and while there is a scroll bar (column of dots) to the right, it has no letters to easily go to the p's for, say, Pink Floyd. The Artists view OTOH has letters A-Z instead of dots. I don't get the inconsistency here.
Moreover, I've found that when I press a song to begin playing, the Remote App inconsistently takes me to its "Up Next" screen as I described in my first post vs. its traditional "Now Playing" screen. I've yet to figure out what determines this.

Remote App and iTunes not syncing

I'm trying to get the Remote.app and the iTunes DJ to sync so that I can control my computer library from iPod Touch. However, the icon for remote does not appear in the iTunes tray under my iPod in "Devices." How can I fix this?
For starters it is a 2.2 version iPod (volume rocker version) and I have the 3.0 firmware on it. My iTunes is the current 8.2 version. I also already have "Look for iPhone and iPod Touch Remotes" checked in my preferences in iTunes. I do have a wireless connection and both my laptop and iPod are connected to it properly. My iPod was connected before, but accidentally. I removed another computer from the library list and now it won't connect.

Have had the exact same problem since the last iTunes update came through. remote worked just fine before that.

Remote app and home sharing

remote app & home sharing worked on my new iPad (3rd gen) but did not work on my iPhone 4. this went on for a week or so but now both of them (remote app and home sharing) work on my iPhone but stopped working on iPad. I tried re installing itunes to 10.6.1.7 (latest version) with no luck. please help because i prefer using my ipad to control my pc

Be sure that all devices are on the same network.
If apple tv and remote are on same homeshare you should be able to select and control the apple tv from with in the remote app.
If apple tv and the itunes are on the same homeshare the apple tv will see the itunes library (and shared photos) in the computer section.
Additionally if these are all on the same homeshare you should see both the apple tv and the itunes library in the remote app.
hope that helps.

Ipod remote app and apple tv sync vs. stream problem

Have been using ATV 1st gen streaming from a shared itunes library for some time.
Now I want to use the ipod remote app and can make it work only if I sync content to the ATV. If I stream content to the ATV, the remote app says there is no content.
However, I can see (on my tv) and play the sync'd content using the white plastic remote.
*Does this mean the remote app works only with synced (not streamed) content on ATV 1st gen?*
(all itunes and ATV software is the latest)
Thank you.

Connect your Remote App to your PC/Mac
Select Song
Select Play
Tap Full Screen icon(Album ARtwork)
Select "AirPlay" button
Selcect your ATV as the only Speaker
This way you can stream content to your ATV
This works with ATV II Aswell
I have both and could not stream FROM ATVII to my MAC/ATV I
But using MAC/PC as source and ATV as speaker makes it work fine with unsynced content

Iphone remote app and itunes

All seemed to be going well until - the updates.
Now my iphone will not recognize my itunes libraries. I deleted the library link from the iPhone remote app and even told itunes to forget all remotes. Back to my iphone to set up as a remote - again. The iphone generates the 4 digit code, itunes even recognizes the iphone, allows me to enter the code, and returns the screen that I can now start using the iphone as a remote. --- Back to the iphone - and the remote app can "find the library" - What gives? Help
<edited by host>

Revelation, do you mean complete restore of the iPhone and all contents thereof? Or the Mac?
I have deleted the application "Remote" from the iPhone, and I have re-installed it. Each time the application will work for a limited time, and then it loses the ability to locate the library.
I continue to suspect IP addresses as the source of the problem, and wonder if the addresses must be static on both devices in order for them to maintain a connection. However, I find it odd that iTunes can register the presence of the iPhone enough to list it in the "devices" pane (therefore, I assume that the two devices are communicating over my network) but then the iPhone fails to locate the iTunes library.
Other applications (Briefcase Lite, for example) seem to be able to conduct over-the-network business without difficulty.

IOS Remote App and ATV2

I cannot get the iOS remote app to connect to my Apple TV2. It connects just fine to the iTunes libraries on my network, but from three different iOS devices I get the same error. The app sees the ATV2 and tries to connect, but fails. The odd thing is, it used to work flawlessly. I hadn't used the app for a month or so and now its not working. I've tried resetting the apple TV (both power cycle and full settings reset) as well as rebooting the router and the iOS devices. I reinstalled the remote app as well. The weird thing is, I can airplay mirror to the ATV2 fine, just the remote app fails. The error message I receive after sitting at the "Connecting to Apple TV" screen is as follows:
"Remote can't connect to your iTunes library. Check your network settings and try again.
I have no idea what changed in my set up, perhaps a software upgrade screwed something up but I'm at a loss I've tried everything. The ATV2 is running 4.4.4, the iOS devices are all up to date running latest remote app.
I Apple TV can access my iTunes libraries fine as well.

Mar 30, 2013 11:31 AM Recently purchased new AirPort Extreme. The wifi network works fine and all is well. The issue is I can not connect my Remote app with iTunes or my Apple TV. - I have rebooted my AP Extreme as well as my AP TV and my PC. - I have logged out of Home Sharing and logged back in. - On my iPad or iPhone I add Library and receive a Passcode, I enter in the PC into iTunes and I receive an error message "The passcode you entered was incorrect. Please try again" I receive this error when entering all my idivices. - I have deleted the Remote App and reinstalled it, but continue to receive the same error message. - All soft ware on all divices are current. - I have diabled my firewall. Who has any ideas? Thanks MacBook Air, iOS 5.1.1

Remote App and Home sharing not working

I've had no luck getting either the Remote app or Home Sharing working. I've opened the correct ports, turned on sharing (both home sharing and under the Preferences -> Sharing tab), installed the newest version of iTunes, restarting the computer, iPhone, and router, and I'm still not seeing the iPhone appear under devices nor am I seeing home sharing as an option in the iPhone's iPod app. Any idea?

These cases often end up with the user having some Odd thirdparty firewall or virus scanner try to disable it

Remote app and apple tv

Is it possible to put the apple tv to sleep with the remote app? With the small apple remote
you press and hold the play/pause button. But I can't seem to find out if remote app will do it.
And also, how do you get to the main menu in apple tv with the remote app. Like youtube, etc.

It seems you have the option to connect the way Scott H described (ie accessing your media library in iTunes) -OR- you can have the iPhone directly access the AppleTV's library. I've done it both ways on mine. The first way means you're streaming wirelessly from your computer, while the second means you're pulling things directly off the AppleTV's hard drive. You can switch back and forth between these methods by going into the Remote program's settings into the "Choose a Library section..." as long as you've set up both your computer and ATV to see the Remote.
Regardless, neither of these methods will accomplish what you want. You can play movies and podcasts on your ATV with the remote, but you can't rent movies, go to YouTube, etc. Hopefully v1.1 will add these things.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

I have an app in my app store that is requiring an update but I never purchased the app and when I click update, another apple ID pops up that is not mine. Now i keep getting reminders to update the app and I cant get rid of it from the app store. Help.

I have an app in my app store that is requiring an update but I never purchased the app and when I click update, another apple ID pops up that is not mine. Now i keep getting reminders to update the app and I cant get rid of it from the app store. Help.

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard (command-C).
In the Finder, press the key combination command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test.

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Similar Messages

Maybe you are looking for