Remote app and home sharing

remote app & home sharing worked on my new iPad (3rd gen) but did not work on my iPhone 4. this went on for a week or so but now both of them (remote app and home sharing) work on my iPhone but stopped working on iPad. I tried re installing itunes to 10.6.1.7 (latest version) with no luck. please help because i prefer using my ipad to control my pc

Be sure that all devices are on the same network.
If apple tv and remote are on same homeshare you should be able to select and control the apple tv from with in the remote app.
If apple tv and the itunes are on the same homeshare the apple tv will see the itunes library (and shared photos) in the computer section.
Additionally if these are all on the same homeshare you should see both the apple tv and the itunes library in the remote app.
hope that helps.

Similar Messages

  • Remote App and Home sharing not working

    I've had no luck getting either the Remote app or Home Sharing working.  I've opened the correct ports, turned on sharing (both home sharing and under the Preferences -> Sharing tab), installed the newest version of iTunes, restarting the computer, iPhone, and router, and I'm still not seeing the iPhone appear under devices nor am I seeing home sharing as an option in the iPhone's iPod app.  Any idea?

    These cases often end up with the user having some Odd thirdparty firewall or virus scanner try to disable it

  • Remote app and home sharing problems

    Hi
    I have suddenly a problem with my home sharing
    Yesterday it all worked fine
    On my both devices iphone and ipad, i cant connect anymore to itunes on my mac mini
    Itunes home sharing is on
    Ipad and iphone it is too
    I tried several times turning it of and on, on devices and itunes
    No result
    I rebooted the whole network and all devices and mac mini
    No result
    I changed nothing on my network
    On mac mini, ipad and iphone, network works fine
    Any suggestion
    Thanks

    Morning fluxxy1245,
    If, after setting up Home Sharing, you cannot access your shared iTunes library over your home network from another computer, Apple TV, or iOS device take a look at:
    Article: TS2972 Troubleshooting Home Sharing
    Have a nice day,
    Mario

  • Apple Remote App or Home Sharing won't work on iPhone or iPad with iTunes (Win 7)

    Hi,
    After I updated my Remote App (version 4.0) on my iPhone 5 (iOS 7.0.3) and iPad-3rd generation (iOS 7.0.3) and updated my iTunes (Version 11.1.3.8) on Win 7, I no longer can get Apple Remote App to work or my Home Sharing to work with Music/Videos for shared library.
    I've followed every step in troubleshooting for Remote App (http://support.apple.com/kb/TS1741) with system requirements, proper iTunes settings, Home Sharing setup, Network connections, restarting the network router, and checking firewall settings.  I've also done every setp in troubleshooting for Home Sharing (http://support.apple.com/kb/TS2972).
    I've done multiple combinations of signing out on both iDevices and iTunes with Home Sharing, turning them on in different orders, closing and re-opening the apps and iTunes, restarting the iDevices and my computer.  No matter what I do, nothing works.
    I've even tried taking my computer and iDevices with me to different routers (work, home, friend's house, etc.) to see if it was a router problem, but no matter what I do it will not work.  I am looking forward to getting an Apple TV soon, but if these problems persist, the outcome of that possibility is unlikely.
    Are any of you experiencing problems like this?  I could really use some help.
    Thanks for all your support.

    I just ran iTunes Diagnostics (Help --> Run Diagnostics... --> "Check" Network connectivity tests).
    I found this:
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    I checked my Firewall settings (Windows Security Essentials) one more time, and it IS enabled for Home/Work (Private) and Public.
    I think I'm going to uninstall and reinstall iTunes and see if that helps.

  • Remote App and Internet Sharing Problem

    Ok so basically heres the setup we have, we have one of the recent iMacs, a Macbook, and 3 PC's, one running XP and the other 2 Vista. All of these computers are on a network together. All our music is on one of the Vista PC's, called "SERVER". This PC is connected to the speaker system, so is what we use for music.
    Now I've been trying to use an iPod Touch we have (most recent firmware 2.2, and most recent Remote app version.) and the remote app to control the itunes on this PC. This is not an issue when the iPod is connected to the Wifi the router itself provides (its one of those wireless routers), but when I switch the Wifi the iPod is using to the Wifi provided by the iMac using internet sharing, it suddenly can't find the library anymore. Internet (safari) still works fine from the ipod when connected to this Wifi point.
    My guess is that because the iMac using internet sharing seems to act more like a router than a wireless access point (allocating its own IP adresses ect..), the iPod thinks its on a different wireless network, and thus cant see the itunes library. Obviously the iMac is connected to the router directly by ethernet, if I hadnt mentioned that.
    So, my question is, can I fix this ?
    Is there any way to make the internet sharing mac behave like a wireless access point and not like a router ?
    Help would be much appreciated.
    Thankyou.

    asuming you mean internet sharing as in you connect adhoc to 1 computer using wifi and the rest of the network is wired
    problems is the middle name of adhoc wifi though cause everybody problems imho
    and wifi routers are soo cheap most people don't bother
    even if internet sharing is used remote app should still work if not connecting adhoc at least it's working for me right now
    with a setup of many computers 1 wifi router
    1 computer sharing internet using an usb 3g modem
    remote app works with all my computers and my appletv

  • Remote App and Desktop Login Does NOT work

    Hello there,
    I have an easy one for you all.  I am running Windows Server 2012 R2 Datacenter off a server at a university.  This server is only intended to be shared with ~10 people doing various tasks like using programs installed and storing data.  As
    of now, I only have been able to do RDP from home with it.  Having tried to setup remote app and desktop, it only works on the server itself and not on other computers, both on the same subnet and a completely different IP address altogether.  Let
    me break down my questions:
    1.  Though the security certificate is  installed in Trusted Root Authorities, but the site is only trusted on the server and not on any of the other computers.  How do I get the others to trust it?
    2. Number 1 except this occurs in the Remote Desktop and App window as well.
    3. Adding users would be under active directory administrative center-->[my server]-->Users-->Add  right?  I guess I cannot play with 'User Accounts' in control panel anymore.
    Any help would be appreciated.  Also, if anyone thinks I am better off doing other things like virtual desktop, then I am all ears.  I just want to keep things as simple as possible.
    Regards,
    Ben

    Hi,
    Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
    If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
    Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • IOS Remote App and ATV2

    I cannot get the iOS remote app to connect to my Apple TV2. It connects just fine to the iTunes libraries on my network, but from three different iOS devices I get the same error. The app sees the ATV2 and tries to connect, but fails. The odd thing is, it used to work flawlessly. I hadn't used the app for a month or so and now its not working. I've tried resetting the apple TV (both power cycle and full settings reset) as well as rebooting the router and the iOS devices. I reinstalled the remote app as well. The weird thing is, I can airplay mirror to the ATV2 fine, just the remote app fails. The error message I receive after sitting at the "Connecting to Apple TV" screen is as follows:
    "Remote can't connect to your iTunes library. Check your network settings and try again.
    I have no idea what changed in my set up, perhaps a software upgrade screwed something up but I'm at a loss I've tried everything. The ATV2 is running 4.4.4, the iOS devices are all up to date running latest remote app.
    I Apple TV can access my iTunes libraries fine as well.

    Mar 30, 2013 11:31 AM Recently purchased new AirPort Extreme.  The wifi network works fine and all is well.  The issue is I can not connect my Remote app with iTunes or my Apple TV. - I have rebooted my AP Extreme as well as my AP TV and my PC. - I have logged out of Home Sharing and logged back in. - On my iPad or iPhone I add Library and receive a Passcode, I enter in the PC into iTunes and I receive an error message "The passcode you entered was incorrect. Please try again"  I receive this error when entering all my idivices. - I have deleted the Remote App and reinstalled it, but continue to receive the same error message. - All soft ware on all divices are current. - I have diabled my firewall. Who has any ideas?  Thanks MacBook Air, iOS 5.1.1

  • Ipod remote app and apple tv sync vs. stream problem

    Have been using ATV 1st gen streaming from a shared itunes library for some time.
    Now I want to use the ipod remote app and can make it work only if I sync content to the ATV. If I stream content to the ATV, the remote app says there is no content.
    However, I can see (on my tv) and play the sync'd content using the white plastic remote.
    *Does this mean the remote app works only with synced (not streamed) content on ATV 1st gen?*
    (all itunes and ATV software is the latest)
    Thank you.

    Connect your Remote App to your PC/Mac
    Select Song
    Select Play
    Tap Full Screen icon(Album ARtwork)
    Select "AirPlay" button
    Selcect your ATV as the only Speaker
    This way you can stream content to your ATV
    This works with ATV II Aswell
    I have both and could not stream FROM ATVII to my MAC/ATV I
    But using MAC/PC as source and ATV as speaker makes it work fine with unsynced content

  • Is anybody else having problems with iOS 7.1 and Home Sharing?

    I have two iPhone 4's - one I recently upgraded to iOS 7.1 and the other running 6.3.1. The phone upgraded to 7.1 will not connect to my (rather large iTunes library) on my Mac Mini (running 10.9.2). The 7.1 phone does see the library - and attempts to connect - but the progress indicator stops at about 50%.
    I've tried de-activating sharing on the Mini and then re-activating. I've tried restoring the 7.1 phone from a back-up. No change.
    Also - now the 6.3 phone will connect to the library - but the playlists have no entries and 99% of the library is missing.
    Before the upgrade - the phone now running 7.1 never had any issues with Home Sharing.
    Anyone else out there having issues with iOS 7.1 and Home Sharing?

    I've had no problems with Facebook on my iPhone 5 but here are a couple of suggestions.
    1. Quit Facebook like I describe then reset the iPhone. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    2. If the first thing doesn't help, quit Facebook again, delete Facebook, and reset the iPad. After the iPad restarts use the App Store app to download Facebook again.

  • Airplay and home sharing does not work with my 2nd gen apple tv

    though my 2nd gen apple tv with version 7 and my iphone 4s with ios 8.0.2 are connected to the same wifi network, airplay and home sharing doesnt show up in my itunes nor in my phone! what should i do?

    Hello there, Ashwin.
    The following Knowledge Base articles offers up some great steps for troubleshooting issues with both AirPlay and Home Sharing, respectively:
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    http://support.apple.com/kb/ts4215
    and
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

    Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
    1. Client Os : Windows 7 Pro
    2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate  with friendly name sky.mti-itservice.no activated.
    The  main problem is following: The RDP logon session never ends
    Any ideas ?
    Regards
    Kenneth Knudsen
    Email : [email protected]
    mvh Kenneth Knudsen MCSE 2003 HP ASE

    Hi Kenneth,
    Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
    You can setup the session time limit in different method.
    1. Open the Server Manager, select Remote Desktop Services.
    2. In Remote desktop Services, in right side you can drop down to collections.
    3. Select the collection which you want to edit the settings.
    4. Under collections Properties, select Task and then Edit Properties.
    5. In Properties dialog box, select Session.
    6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK. 
    And apart also by group policy setting as below.
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits 
    User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits 
    -  Set time limit for disconnected sessions
    -  Set time limit for active but idle Remote Desktop Services sessions
    -  Set time limit for active Remote Desktop Services sessions
    -  End session when time limits are reached
    Please check which setting suitable for your environment and you can apply for your case.
    [Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
    https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

  • HT4437 What is difference between air play and home sharing if you just want to show iPhoto's on HD tv through apple tv (just purchased MacBook Air and Apple tv)

    What is difference between air play and home sharing when wanting to show photos on HD tv through apple tv?  Just bought Mac book air and apple tv. 

    You would have to use home-sharing if streaming from a computer. Computer would need to be on and running iTunes.
    http://support.apple.com/kb/HT4352
    Airplay would be useful if streaming from an IOS device
    http://support.apple.com/kb/HT4437

  • Remote App and iTunes not syncing

    I'm trying to get the Remote.app and the iTunes DJ to sync so that I can control my computer library from iPod Touch. However, the icon for remote does not appear in the iTunes tray under my iPod in "Devices." How can I fix this?
    For starters it is a 2.2 version iPod (volume rocker version) and I have the 3.0 firmware on it. My iTunes is the current 8.2 version. I also already have "Look for iPhone and iPod Touch Remotes" checked in my preferences in iTunes. I do have a wireless connection and both my laptop and iPod are connected to it properly. My iPod was connected before, but accidentally. I removed another computer from the library list and now it won't connect.

    Have had the exact same problem since the last iTunes update came through. remote worked just fine before that.

  • Iphone remote app and itunes

    All seemed to be going well until - the updates.
    Now my iphone will not recognize my itunes libraries. I deleted the library link from the iPhone remote app and even told itunes to forget all remotes. Back to my iphone to set up as a remote - again. The iphone generates the 4 digit code, itunes even recognizes the iphone, allows me to enter the code, and returns the screen that I can now start using the iphone as a remote. --- Back to the iphone - and the remote app can "find the library" - What gives? Help
    <edited by host>

    Revelation, do you mean complete restore of the iPhone and all contents thereof? Or the Mac?
    I have deleted the application "Remote" from the iPhone, and I have re-installed it. Each time the application will work for a limited time, and then it loses the ability to locate the library.
    I continue to suspect IP addresses as the source of the problem, and wonder if the addresses must be static on both devices in order for them to maintain a connection. However, I find it odd that iTunes can register the presence of the iPhone enough to list it in the "devices" pane (therefore, I assume that the two devices are communicating over my network) but then the iPhone fails to locate the iTunes library.
    Other applications (Briefcase Lite, for example) seem to be able to conduct over-the-network business without difficulty.

Maybe you are looking for

  • Networking G3 to Mac Mini

    Hi Guys, I have an old G3 Beige and a Mac Mini G4(non-intel), and ,basically, I would like to know if it is possible to link the two via ethernet cable so that the G3 could be used as an extra storage device for the Mini. The mini is slowly running o

  • Mac Estimated time is always wrong... FOR YEARS!

    Sometimes it will say estimated time remaining 45 minutes and then it will just jump to 10 minutes and then back up to something rediculous like "about an hour" and then back down to 20... It's crazy and as it's been this way as far as I can recall f

  • Firefox 6 can't open add-ons manager to uninstall yahoo toobar which installed by itself.

    Yahoo toobar installed itself on my computer and I can't open Add-ons manager to uninstall it. Add-ons manager window just keeps trying to load but won't load.

  • Updating MDM table when another table gets updated

    Hi Guys, We use MDM catalog for SRM we have a table Catogories and Hierarchy, Our requirement is when ever Catogories table gets updated we have to update the Hierarchy table using some logic, So please let me know whether it is possible to do this a

  • Help: how to extract digits from a string?

    Hi, I am trying to make a formatted phone number report. The field is VARCHAR2(20). There might be some sort of irregularities. What I need to do are in two steps: 1. extract all digits in order; 2. format the output as (xxx) xxx-xxxx Any suggestions