Remote app and playlists

Why is it that the remote app changes the song order on my playlists from iTunes? This is so irritating.

TOTALLY Agree.
I don't know what the solutionis, but it's maddening.

Similar Messages

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Remote App and Desktop Login Does NOT work

Hello there,
I have an easy one for you all. I am running Windows Server 2012 R2 Datacenter off a server at a university. This server is only intended to be shared with ~10 people doing various tasks like using programs installed and storing data. As
of now, I only have been able to do RDP from home with it. Having tried to setup remote app and desktop, it only works on the server itself and not on other computers, both on the same subnet and a completely different IP address altogether. Let
me break down my questions:
1. Though the security certificate is installed in Trusted Root Authorities, but the site is only trusted on the server and not on any of the other computers. How do I get the others to trust it?
2. Number 1 except this occurs in the Remote Desktop and App window as well.
3. Adding users would be under active directory administrative center-->[my server]-->Users-->Add right? I guess I cannot play with 'User Accounts' in control panel anymore.
Any help would be appreciated. Also, if anyone thinks I am better off doing other things like virtual desktop, then I am all ears. I just want to keep things as simple as possible.
Regards,
Ben

Hi,
Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
Thanks.
Jeremy Wu
TechNet Community Support

Remote App and iTunes not syncing

I'm trying to get the Remote.app and the iTunes DJ to sync so that I can control my computer library from iPod Touch. However, the icon for remote does not appear in the iTunes tray under my iPod in "Devices." How can I fix this?
For starters it is a 2.2 version iPod (volume rocker version) and I have the 3.0 firmware on it. My iTunes is the current 8.2 version. I also already have "Look for iPhone and iPod Touch Remotes" checked in my preferences in iTunes. I do have a wireless connection and both my laptop and iPod are connected to it properly. My iPod was connected before, but accidentally. I removed another computer from the library list and now it won't connect.

Have had the exact same problem since the last iTunes update came through. remote worked just fine before that.

Remote app and home sharing

remote app & home sharing worked on my new iPad (3rd gen) but did not work on my iPhone 4. this went on for a week or so but now both of them (remote app and home sharing) work on my iPhone but stopped working on iPad. I tried re installing itunes to 10.6.1.7 (latest version) with no luck. please help because i prefer using my ipad to control my pc

Be sure that all devices are on the same network.
If apple tv and remote are on same homeshare you should be able to select and control the apple tv from with in the remote app.
If apple tv and the itunes are on the same homeshare the apple tv will see the itunes library (and shared photos) in the computer section.
Additionally if these are all on the same homeshare you should see both the apple tv and the itunes library in the remote app.
hope that helps.

Ipod remote app and apple tv sync vs. stream problem

Have been using ATV 1st gen streaming from a shared itunes library for some time.
Now I want to use the ipod remote app and can make it work only if I sync content to the ATV. If I stream content to the ATV, the remote app says there is no content.
However, I can see (on my tv) and play the sync'd content using the white plastic remote.
*Does this mean the remote app works only with synced (not streamed) content on ATV 1st gen?*
(all itunes and ATV software is the latest)
Thank you.

Connect your Remote App to your PC/Mac
Select Song
Select Play
Tap Full Screen icon(Album ARtwork)
Select "AirPlay" button
Selcect your ATV as the only Speaker
This way you can stream content to your ATV
This works with ATV II Aswell
I have both and could not stream FROM ATVII to my MAC/ATV I
But using MAC/PC as source and ATV as speaker makes it work fine with unsynced content

Iphone remote app and itunes

All seemed to be going well until - the updates.
Now my iphone will not recognize my itunes libraries. I deleted the library link from the iPhone remote app and even told itunes to forget all remotes. Back to my iphone to set up as a remote - again. The iphone generates the 4 digit code, itunes even recognizes the iphone, allows me to enter the code, and returns the screen that I can now start using the iphone as a remote. --- Back to the iphone - and the remote app can "find the library" - What gives? Help
<edited by host>

Revelation, do you mean complete restore of the iPhone and all contents thereof? Or the Mac?
I have deleted the application "Remote" from the iPhone, and I have re-installed it. Each time the application will work for a limited time, and then it loses the ability to locate the library.
I continue to suspect IP addresses as the source of the problem, and wonder if the addresses must be static on both devices in order for them to maintain a connection. However, I find it odd that iTunes can register the presence of the iPhone enough to list it in the "devices" pane (therefore, I assume that the two devices are communicating over my network) but then the iPhone fails to locate the iTunes library.
Other applications (Briefcase Lite, for example) seem to be able to conduct over-the-network business without difficulty.

IOS Remote App and ATV2

I cannot get the iOS remote app to connect to my Apple TV2. It connects just fine to the iTunes libraries on my network, but from three different iOS devices I get the same error. The app sees the ATV2 and tries to connect, but fails. The odd thing is, it used to work flawlessly. I hadn't used the app for a month or so and now its not working. I've tried resetting the apple TV (both power cycle and full settings reset) as well as rebooting the router and the iOS devices. I reinstalled the remote app as well. The weird thing is, I can airplay mirror to the ATV2 fine, just the remote app fails. The error message I receive after sitting at the "Connecting to Apple TV" screen is as follows:
"Remote can't connect to your iTunes library. Check your network settings and try again.
I have no idea what changed in my set up, perhaps a software upgrade screwed something up but I'm at a loss I've tried everything. The ATV2 is running 4.4.4, the iOS devices are all up to date running latest remote app.
I Apple TV can access my iTunes libraries fine as well.

Mar 30, 2013 11:31 AM Recently purchased new AirPort Extreme. The wifi network works fine and all is well. The issue is I can not connect my Remote app with iTunes or my Apple TV. - I have rebooted my AP Extreme as well as my AP TV and my PC. - I have logged out of Home Sharing and logged back in. - On my iPad or iPhone I add Library and receive a Passcode, I enter in the PC into iTunes and I receive an error message "The passcode you entered was incorrect. Please try again" I receive this error when entering all my idivices. - I have deleted the Remote App and reinstalled it, but continue to receive the same error message. - All soft ware on all divices are current. - I have diabled my firewall. Who has any ideas? Thanks MacBook Air, iOS 5.1.1

Unable to see Remote App and Desktop Connection in Group Policy Management Editor

I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
RD Gateway
Remote Desktop Connection Client
Remote Desktop Session Host
But NOT
Remote App and Desktop Connection
Which I need. Is there anyway of adding this?

> I am unable to see the Remote App and Desktop Connection in Group Policy
> Management Editor on my 2012 R2 DC. I am therefore not able configure
> the connection URL in Access RemoteApp and desktops in our Windows 8.1
> client environment.
http://gpsearch.azurewebsites.net/#8113
Do you use a central store for ADMX? Is this central store out of date?
(Means "still contains ADMX from W7/2008R2")
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

HT4527 How can move the apps and playlists on my iPad to my Mac? Whenever I attempt to sync, I get a message stating that all apps and music on my iPad will be replaced by content from my Mac and there are no content. Thanks.

How can move the apps and playlists on my iPad to my Mac? Whenever I attempt to sync, I get a message stating that all apps and music on my iPad will be replaced by content from my Mac and there are no content. Thanks.

the apps will not be deleted if the itunes is authorised for the apple id from which you downloaded the apps.
for the songs if you have downloaded it from a store other than itunes an app "TuneAid" will help you. download the full version then you can copy all the songs on the ipad to ur itunes library

Remote app and homesharing

Hello,
There's something odd about the remote app for the iPhone in combination with my homesharing playlists. If a song is playing (by playing it on my macbook) it will let me see the song, pause it, and even play the next or previous song, but it won't show me the playlists.
Why is this? It looks like it's only half working. Or perheps it will be in the next remote app update?
Gr yann

Unfortunately, I think you'll need an new remote.

Using the Remote App and playing iTunes from a shared Library

I have a playlist set up in my main iTunes library on my iMac. This is a shared library on my local network at home. I can access and play the library remotely from my MacBook. I want to move my MacBook outside with external speakers for a party. I want to be able to access the shared library from the iMac inside the house from my MacBook and be able to control it with the Remote App.
My problem is that when I use Remote and the MacBook outside (I've set up the iTunes passcode with that computer and my iPod) it will only recognize the library on that computer, even if I am logged in to the shared library and it is visible in the MacBook. So basically, remote is doing what it is suppose to do in a normal situation, but I need it to recognize and play from the shared library.
When I turn on home sharing on the iPod I can access all the libraries on the various macs in our house, but the music will only play out of that particular machines speakers.
I don't have wireless speakers, so I can't think of another way to do this. Is there?
Thanks, Sandy

Well, I've got it to work although not ideal.
1. On my main computer (iMac) I created the playlist that I want available to control at a party.
2. I went to iTunes settings/Sharing and selected "Share selected playlists" and checked the playlist I made for a party.
3. I Linked my iPod to MacBook (which is outside with external speakers) using the 4 digit code
4. iPod, Home Sharing Off
5. Select the Library on iPod
6. Select "More" (bottom right of iPod)
7. Select "Shared" from the list that appears
8. Select the computer that has the shared library
9. Select the playlist (or lists if you created others)
This setting is allowing me to use my iPod "Remote App" to play an iTunes playlist (or the entire catalogue) from a shared library on my MacBook WITH the sound coming from my MacBook and NOT from my iMac where the original iTunes catalogue is located.
Not sure if this is the easiest way, but it's working.

(iPhone) Remote app and internet radio

Does anyone know why the Remote app does not show the (internet) Radio tag in iTunes, when all others are present (except the Apps tag)?
This of course is to remotely cause the computer to play internet Radio over the house WiFi & Express - not to get Radio on the iPhone itself. There seems no obvious reason for this tag being missing from the control set - or is there something wrong with my setup? (but it works from iTunes on the computer).

You can create a Playlist called RADIO and drag all of the internet radio stations (or the ones you want) into that and it works fine. Works for Front Row too if you have a Mac. The only issue is that some radio stations change URL now and again, so the list can go out of date.

Remote App and shuffling a single album

I'm using iTunes 11.0.1.12 on my PC and Remote App 3.0 (598) on my Touch 5G running iOS 6.0.1, and I want to play an album with its songs shuffled. For example, I go to Artists, choose Steely Dan, then "A Decade Of Steely Dan". There's no obvious way to begin playing, so I press the first song, which begins playing. This takes me to "Up Next", which has all the songs from the album I was on, PLUS 7 songs from the album, "Everything Must Go", also by Steely Dan. This makes no sense at all, but I ignore it for the moment, as shuffling is what's on my mind. The thing is, there's no shuffle button on "Up Next", so I click on the tiny album artwork in the upper right corner, and it takes me to the traditional "Now Playing" screen, with the transport controls and big album artwork in the middle. There I find my shuffle button, so I press it, and it turns blue, so I'm all good, right? Wrong! When the next song begins, it's from some other Steely Dan album chosen at random, like "Katy Lied". When I go back to "Up Next", songs from all my Steely Dan albums now appear. All I wanted was to shuffle the one album "A Decade Of Steely Dan" and play just its songs, but this simple thing doesn't appear to be possible. Am I missing something?

Eliciting the bug requires entry to the album in the Remote App through Artists or Genres. I can leave the "Up Next" list displayed in iTunes on the PC and watch it populate with all the following albums when I do this. However, if I enter the album through Composers or Albums, only that album's tracks go into "Up Next". Unfortunately, using Composers to select albums is not a solution at all; for one thing, I only maintain Composer metadata for classical composers. Using Albums isn't really a solution either, because I like to browse by artist or composer. Interestingly, the Remote App groups albums by artist, but it's a flat list and hard to scroll through because there are so many more albums that artists, and while there is a scroll bar (column of dots) to the right, it has no letters to easily go to the p's for, say, Pink Floyd. The Artists view OTOH has letters A-Z instead of dots. I don't get the inconsistency here.
Moreover, I've found that when I press a song to begin playing, the Remote App inconsistently takes me to its "Up Next" screen as I described in my first post vs. its traditional "Now Playing" screen. I've yet to figure out what determines this.

Remote App and Internet Sharing Problem

Ok so basically heres the setup we have, we have one of the recent iMacs, a Macbook, and 3 PC's, one running XP and the other 2 Vista. All of these computers are on a network together. All our music is on one of the Vista PC's, called "SERVER". This PC is connected to the speaker system, so is what we use for music.
Now I've been trying to use an iPod Touch we have (most recent firmware 2.2, and most recent Remote app version.) and the remote app to control the itunes on this PC. This is not an issue when the iPod is connected to the Wifi the router itself provides (its one of those wireless routers), but when I switch the Wifi the iPod is using to the Wifi provided by the iMac using internet sharing, it suddenly can't find the library anymore. Internet (safari) still works fine from the ipod when connected to this Wifi point.
My guess is that because the iMac using internet sharing seems to act more like a router than a wireless access point (allocating its own IP adresses ect..), the iPod thinks its on a different wireless network, and thus cant see the itunes library. Obviously the iMac is connected to the router directly by ethernet, if I hadnt mentioned that.
So, my question is, can I fix this ?
Is there any way to make the internet sharing mac behave like a wireless access point and not like a router ?
Help would be much appreciated.
Thankyou.

asuming you mean internet sharing as in you connect adhoc to 1 computer using wifi and the rest of the network is wired
problems is the middle name of adhoc wifi though cause everybody problems imho
and wifi routers are soo cheap most people don't bother
even if internet sharing is used remote app should still work if not connecting adhoc at least it's working for me right now
with a setup of many computers 1 wifi router
1 computer sharing internet using an usb 3g modem
remote app works with all my computers and my appletv

Remote app and playlists

Similar Messages

Maybe you are looking for