Remote app and podcasts

Does the Remote support chapters for podcasts? I have several gapless CDs converted to chapterized .m4a files, but the Remote won't give me a list of the chapters (songs in my case).
Wondering if this is a general limitation of the Remote or if my "podcasts" aren't properly formatted for it to work.
I should mention that in my iPod Touch's internal music library, I have full access to the chapters in these files. And in iTunes, of course. It's only the Remote that appears to be hobbled.

It does the same thing for me.....I think its a limitation/bug of the remote application. Its a shame, cause other than that, the interface for the remote app is MUCH better than the built-in iphone interface!
-pj

Similar Messages

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Remote App and Desktop Login Does NOT work

Hello there,
I have an easy one for you all. I am running Windows Server 2012 R2 Datacenter off a server at a university. This server is only intended to be shared with ~10 people doing various tasks like using programs installed and storing data. As
of now, I only have been able to do RDP from home with it. Having tried to setup remote app and desktop, it only works on the server itself and not on other computers, both on the same subnet and a completely different IP address altogether. Let
me break down my questions:
1. Though the security certificate is installed in Trusted Root Authorities, but the site is only trusted on the server and not on any of the other computers. How do I get the others to trust it?
2. Number 1 except this occurs in the Remote Desktop and App window as well.
3. Adding users would be under active directory administrative center-->[my server]-->Users-->Add right? I guess I cannot play with 'User Accounts' in control panel anymore.
Any help would be appreciated. Also, if anyone thinks I am better off doing other things like virtual desktop, then I am all ears. I just want to keep things as simple as possible.
Regards,
Ben

Hi,
Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
Thanks.
Jeremy Wu
TechNet Community Support

Remote App and iTunes not syncing

I'm trying to get the Remote.app and the iTunes DJ to sync so that I can control my computer library from iPod Touch. However, the icon for remote does not appear in the iTunes tray under my iPod in "Devices." How can I fix this?
For starters it is a 2.2 version iPod (volume rocker version) and I have the 3.0 firmware on it. My iTunes is the current 8.2 version. I also already have "Look for iPhone and iPod Touch Remotes" checked in my preferences in iTunes. I do have a wireless connection and both my laptop and iPod are connected to it properly. My iPod was connected before, but accidentally. I removed another computer from the library list and now it won't connect.

Have had the exact same problem since the last iTunes update came through. remote worked just fine before that.

Remote app and home sharing

remote app & home sharing worked on my new iPad (3rd gen) but did not work on my iPhone 4. this went on for a week or so but now both of them (remote app and home sharing) work on my iPhone but stopped working on iPad. I tried re installing itunes to 10.6.1.7 (latest version) with no luck. please help because i prefer using my ipad to control my pc

Be sure that all devices are on the same network.
If apple tv and remote are on same homeshare you should be able to select and control the apple tv from with in the remote app.
If apple tv and the itunes are on the same homeshare the apple tv will see the itunes library (and shared photos) in the computer section.
Additionally if these are all on the same homeshare you should see both the apple tv and the itunes library in the remote app.
hope that helps.

Ipod remote app and apple tv sync vs. stream problem

Have been using ATV 1st gen streaming from a shared itunes library for some time.
Now I want to use the ipod remote app and can make it work only if I sync content to the ATV. If I stream content to the ATV, the remote app says there is no content.
However, I can see (on my tv) and play the sync'd content using the white plastic remote.
*Does this mean the remote app works only with synced (not streamed) content on ATV 1st gen?*
(all itunes and ATV software is the latest)
Thank you.

Connect your Remote App to your PC/Mac
Select Song
Select Play
Tap Full Screen icon(Album ARtwork)
Select "AirPlay" button
Selcect your ATV as the only Speaker
This way you can stream content to your ATV
This works with ATV II Aswell
I have both and could not stream FROM ATVII to my MAC/ATV I
But using MAC/PC as source and ATV as speaker makes it work fine with unsynced content

Iphone remote app and itunes

All seemed to be going well until - the updates.
Now my iphone will not recognize my itunes libraries. I deleted the library link from the iPhone remote app and even told itunes to forget all remotes. Back to my iphone to set up as a remote - again. The iphone generates the 4 digit code, itunes even recognizes the iphone, allows me to enter the code, and returns the screen that I can now start using the iphone as a remote. --- Back to the iphone - and the remote app can "find the library" - What gives? Help
<edited by host>

Revelation, do you mean complete restore of the iPhone and all contents thereof? Or the Mac?
I have deleted the application "Remote" from the iPhone, and I have re-installed it. Each time the application will work for a limited time, and then it loses the ability to locate the library.
I continue to suspect IP addresses as the source of the problem, and wonder if the addresses must be static on both devices in order for them to maintain a connection. However, I find it odd that iTunes can register the presence of the iPhone enough to list it in the "devices" pane (therefore, I assume that the two devices are communicating over my network) but then the iPhone fails to locate the iTunes library.
Other applications (Briefcase Lite, for example) seem to be able to conduct over-the-network business without difficulty.

IOS Remote App and ATV2

I cannot get the iOS remote app to connect to my Apple TV2. It connects just fine to the iTunes libraries on my network, but from three different iOS devices I get the same error. The app sees the ATV2 and tries to connect, but fails. The odd thing is, it used to work flawlessly. I hadn't used the app for a month or so and now its not working. I've tried resetting the apple TV (both power cycle and full settings reset) as well as rebooting the router and the iOS devices. I reinstalled the remote app as well. The weird thing is, I can airplay mirror to the ATV2 fine, just the remote app fails. The error message I receive after sitting at the "Connecting to Apple TV" screen is as follows:
"Remote can't connect to your iTunes library. Check your network settings and try again.
I have no idea what changed in my set up, perhaps a software upgrade screwed something up but I'm at a loss I've tried everything. The ATV2 is running 4.4.4, the iOS devices are all up to date running latest remote app.
I Apple TV can access my iTunes libraries fine as well.

Mar 30, 2013 11:31 AM Recently purchased new AirPort Extreme. The wifi network works fine and all is well. The issue is I can not connect my Remote app with iTunes or my Apple TV. - I have rebooted my AP Extreme as well as my AP TV and my PC. - I have logged out of Home Sharing and logged back in. - On my iPad or iPhone I add Library and receive a Passcode, I enter in the PC into iTunes and I receive an error message "The passcode you entered was incorrect. Please try again" I receive this error when entering all my idivices. - I have deleted the Remote App and reinstalled it, but continue to receive the same error message. - All soft ware on all divices are current. - I have diabled my firewall. Who has any ideas? Thanks MacBook Air, iOS 5.1.1

Unable to see Remote App and Desktop Connection in Group Policy Management Editor

I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
RD Gateway
Remote Desktop Connection Client
Remote Desktop Session Host
But NOT
Remote App and Desktop Connection
Which I need. Is there anyway of adding this?

> I am unable to see the Remote App and Desktop Connection in Group Policy
> Management Editor on my 2012 R2 DC. I am therefore not able configure
> the connection URL in Access RemoteApp and desktops in our Windows 8.1
> client environment.
http://gpsearch.azurewebsites.net/#8113
Do you use a central store for ADMX? Is this central store out of date?
(Means "still contains ADMX from W7/2008R2")
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Slow speed for downloading app and podcasts by WiFi

My Ipod Touch 5G is very very slow for downloading apps and podcasts, but not with internet browsing or youtube videos. I have an Ipad 2 with not problems in the same WiFi network. But the Ipad don´t have the last iOS update (6.0.1).
Anyone else have the same issue?

Download speed on wifi on my iphone is also slow, but only when downloading podcasts...
Running 6.0.2 on iPhone 5.
On WIFI I can download a 45 mb app from the appstore in less than a minute. I can stream Youtube and Netflix with no problems. Internet browsing - no problems.
But downloading podcasts with Instacast 3, Downcast or the Apple Podcast app happens at a rate of 20-50 kb/s when on WIFI. As soon as I switch to 3g (I am in a european country where 4g/LTE is not yet available) my download speed goes to between 300kb/s and 2 mb/s.

Remote app and Ipad with Apple TV

I use the Remote app with both an iPad and iPhone to control my first gen Apple TV. This works fine except for one thing. When I select "Apple TV" as the library, using an iPhone I have access to all my library including Podcasts. When I run the same app on my Ipad, still selecting "Apple TV" as the library, no Podcasts come up on the iPad to select - the category is completely missing.
Has anyone else seen this issue ? Are they still there but hidden somewhere else ? Bear in mind I keep no content on the Apple TV - it is effectively just acting as a wireless device to get the signal to my TV.

Hi,
still selecting "Apple TV" as the library, no Podcasts come up on the iPad to select - the category is completely missing.
Tap Settings on the iPad then tap General / Reset / Reset Network Settings then restart your iPad.
Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
See if you can access podcasts now.
Carolyn

Remote app and last version

The newest update of Apple's Remote app requires iOS 7.1 but my iPhone 5 is on 7.0.x. However iTunes insists on installing the new version, even though it is incompatible, and it predictably crashes. I can download the last compatible version via the App Store app on the iPhone 5. But the next time I sync in iTunes it overwrites it with the incompatible version. I'd like to keep the newest version in iTunes because my iPad is on iOS 8.
What's the recommended course of action here?

The first part of your response helped a lot, thanks. (Though you meant 7.0.x version, not 7.1 v).
It's such a chore to have to avoid updating all apps. iTunes should allow apps to update (for devices on newer iOS versions) but never overwrite existing apps (already on a device) if the version of the newer app in iTunes is newer than the compatible version for that device.
Alternately it should allow you to either a) keep multiple versions of apps in iTunes and install them on appropriate target devices as you would install an iPhone and iPad only version of an app separately, or b) designate certain apps as excluded from further updates.
But dealing with reality, I do want the newer version on the iPad if possible. It's currently already installed there. The question I now have is, if you have to manually transfer purchases to get the copy of the app on the device back over to iTunes, if the iTunes version is now the older version, why would synching the iPad (with the newer version) transfer those purchases back to iTunes?
BTW, Apple's Podcasts app is also a culprit.

Remote app and apple tv

Is it possible to put the apple tv to sleep with the remote app? With the small apple remote
you press and hold the play/pause button. But I can't seem to find out if remote app will do it.
And also, how do you get to the main menu in apple tv with the remote app. Like youtube, etc.

It seems you have the option to connect the way Scott H described (ie accessing your media library in iTunes) -OR- you can have the iPhone directly access the AppleTV's library. I've done it both ways on mine. The first way means you're streaming wirelessly from your computer, while the second means you're pulling things directly off the AppleTV's hard drive. You can switch back and forth between these methods by going into the Remote program's settings into the "Choose a Library section..." as long as you've set up both your computer and ATV to see the Remote.
Regardless, neither of these methods will accomplish what you want. You can play movies and podcasts on your ATV with the remote, but you can't rent movies, go to YouTube, etc. Hopefully v1.1 will add these things.

Remote App and shuffling a single album

I'm using iTunes 11.0.1.12 on my PC and Remote App 3.0 (598) on my Touch 5G running iOS 6.0.1, and I want to play an album with its songs shuffled. For example, I go to Artists, choose Steely Dan, then "A Decade Of Steely Dan". There's no obvious way to begin playing, so I press the first song, which begins playing. This takes me to "Up Next", which has all the songs from the album I was on, PLUS 7 songs from the album, "Everything Must Go", also by Steely Dan. This makes no sense at all, but I ignore it for the moment, as shuffling is what's on my mind. The thing is, there's no shuffle button on "Up Next", so I click on the tiny album artwork in the upper right corner, and it takes me to the traditional "Now Playing" screen, with the transport controls and big album artwork in the middle. There I find my shuffle button, so I press it, and it turns blue, so I'm all good, right? Wrong! When the next song begins, it's from some other Steely Dan album chosen at random, like "Katy Lied". When I go back to "Up Next", songs from all my Steely Dan albums now appear. All I wanted was to shuffle the one album "A Decade Of Steely Dan" and play just its songs, but this simple thing doesn't appear to be possible. Am I missing something?

Eliciting the bug requires entry to the album in the Remote App through Artists or Genres. I can leave the "Up Next" list displayed in iTunes on the PC and watch it populate with all the following albums when I do this. However, if I enter the album through Composers or Albums, only that album's tracks go into "Up Next". Unfortunately, using Composers to select albums is not a solution at all; for one thing, I only maintain Composer metadata for classical composers. Using Albums isn't really a solution either, because I like to browse by artist or composer. Interestingly, the Remote App groups albums by artist, but it's a flat list and hard to scroll through because there are so many more albums that artists, and while there is a scroll bar (column of dots) to the right, it has no letters to easily go to the p's for, say, Pink Floyd. The Artists view OTOH has letters A-Z instead of dots. I don't get the inconsistency here.
Moreover, I've found that when I press a song to begin playing, the Remote App inconsistently takes me to its "Up Next" screen as I described in my first post vs. its traditional "Now Playing" screen. I've yet to figure out what determines this.

Remote App and Internet Sharing Problem

Ok so basically heres the setup we have, we have one of the recent iMacs, a Macbook, and 3 PC's, one running XP and the other 2 Vista. All of these computers are on a network together. All our music is on one of the Vista PC's, called "SERVER". This PC is connected to the speaker system, so is what we use for music.
Now I've been trying to use an iPod Touch we have (most recent firmware 2.2, and most recent Remote app version.) and the remote app to control the itunes on this PC. This is not an issue when the iPod is connected to the Wifi the router itself provides (its one of those wireless routers), but when I switch the Wifi the iPod is using to the Wifi provided by the iMac using internet sharing, it suddenly can't find the library anymore. Internet (safari) still works fine from the ipod when connected to this Wifi point.
My guess is that because the iMac using internet sharing seems to act more like a router than a wireless access point (allocating its own IP adresses ect..), the iPod thinks its on a different wireless network, and thus cant see the itunes library. Obviously the iMac is connected to the router directly by ethernet, if I hadnt mentioned that.
So, my question is, can I fix this ?
Is there any way to make the internet sharing mac behave like a wireless access point and not like a router ?
Help would be much appreciated.
Thankyou.

asuming you mean internet sharing as in you connect adhoc to 1 computer using wifi and the rest of the network is wired
problems is the middle name of adhoc wifi though cause everybody problems imho
and wifi routers are soo cheap most people don't bother
even if internet sharing is used remote app should still work if not connecting adhoc at least it's working for me right now
with a setup of many computers 1 wifi router
1 computer sharing internet using an usb 3g modem
remote app works with all my computers and my appletv

Remote app and podcasts

Similar Messages

Maybe you are looking for