Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)

I am unable to use my Remote app 2.1.1 with my iTunes 10.2.1.
I recently updated all software/firmware as follows:
1st Gen iPad - iOS 4.3 (8F190)
iTunes - 10.2.1 (1)
Remote - 2.1.1
I am using an iMac circa 2005 (6.1)
Mac OS X 10.6.7
2.33 Ghz Intel Core Duo; 2 GB 667 MHz DDR2 SDRAM
Wirless Router: Netgear WNDR3400, SSIDs off, WMM enabled.
I have turned on Home Sharing on both iTunes and the Remote app.
I have made sure that both iMac and iPad are on same network.
I have made sure that iTunes is allowing incoming connections through the firewall settings in system preferences.
I have deleted and reinstalled both iTunes on the iMac and Remote app on the iPad.
I have trashed the preferences for iTunes.
I have gone to Settings on the iPad and turned on Home Sharing through the iPod app.
I no longer see "Automatically search for iPods, iPhones, or iPads" in the iTunes preferences...ANYWHERE.
I have reset the router.
I have reinstalled iTunes 10.1.1 - didn't work, re-updated to 10.2.1
Installed Mac OS X 10.6.7 combo update.
Nothing seems to work.
iTunes does not show my iPad when the Remote app is launched and gives me the 4 digit code to type in to pair it.
Anyone else having this issue?
Any solutions?
Thank you,

same issue iphone 4

Similar Messages

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

Why does Remote App no longer work since upgrading to IOS 6?

Since updating my Touch to IOS 6, I can no longer use the Remote App to connect to my itunes library on my iMac. I have tried both homesharing and "add an itunes library" and both have failed. I have been through all the posted support articles with no success. By the way, I can still use my first generation IPAD to connect with no problems.

I have this problem also,
We have an iPad 2, iPod Touch, iPhone 4,4s and iMac.
The printer is a HP LaserJet CP1525nw and is listed as a compatable AirPrint printer.
The two iPhones and iPad 2 were upgraded to IOS6 last week.
We wanted to print something out today and when selecting printer it came up with "No AirPrint Printers Found".
This happened on the Other iPhone and the iPad as well. However all the other devices that were not upgraded still work.
I have upgraded the firmware on the printer to the latest version, however this has not helped. I have restarted all devices as well as my network router multiple times to no avail.
Apple need to provide a fix as this provlem is evidently as a result of their IOS6 upgrade.

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

IPhone 4 apps no longer work after upgrade to OS 5.0.1

After upgrading to 5.0.1 through iTunes, downloaded apps will no longer boot. I get a flash, then nothing.
Of course, Apple wants $70 to tell me how to fix this.
Has anyone else had this problem? Any suggestions? Hard reboots don't work.

Some Users have Reported that a Restore as New has helped Resolve issues...
Set Up as New Device
http://support.apple.com/kb/HT4137

Keyboard shortcuts no longer work after upgrade to ios 6

After upgrading to iOS 6, the keyboard shortcuts on my iPhone 4S no longer work. Not only that I can't change them either. If I add or delete a shortcut, it simply goes back to the way it was when I exit the settings and go back in. My iPad 2 doesn't have this problem, only my iPhone 4S.
I tried restarting as well as doing a reset (hold home and power button).
Any idea how to fix this?

If you want to go through all the steps I took:
1. Restart
2. Soft reset (hold home and power until Apple logo appears)
3. Reset keyboard dictionary
4. Reset all settings
5. Clear autofill
Only after the last step did things start working. Prior to that I couldn't make any changes I made to the keyboard shortcuts stick, though every now and then changes would take. Sometimes trying to delete a shortcut would crash the settings app. In all cases the shortcuts didn't work.

TouchID no longer works after upgrading to iOS 8.1 on iPhone 6 Plus

TouchID no longer works for unlock after upgrading to iOS 8.1
I have tried removing my fingerprints on file and re-adding without any noticed improvement in performance.

Try a quick and rissoles Reset by holding the Sleep / Wake button and the Home button at the same time until the Apple logo shows then release the buttons and wait until the lock-screen returns. Now open you iPhone with your code and then click the Sleep / Wake button and then depress only the Home button. Now try you finger print.

Some Of My Apps Do Not Work After Upgrading To iOS 4 And Fluctuating Wi-Fi

After upgrading to iOS 4 on my 8GB iPod Touch, some of my audio apps do not work. CBS Radio just crashes, ESPN Radio stays on the "Station ESPN Radio data loaded" screen, and the iRadioSuite stays on "Connecting". Sirius/XM Online, iheart radio, Radio, and WunderRadio appear to work correctly. Also, I always had three bars for wi-fi signal strength on my home network before the upgrade. Now I get fluctuating levels that at times go down to two bars and even one bar. Needless to say, this is very frustrating!

I also updated the iPhone 3G yesterday to iOS 4. I just turned on wi-fi on the iPhone. CBS Radio crashed on the iPhone but I got a steady three bar wi-fi signal strength level as I moved around the condo so this must be an 8GB iPod Touch and iOS 4 interface issue.

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

IPhone remote app no longer working after iPhone update to version 4.2.1

I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
"Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
Home sharing is enabled on all the Apple TV devices
I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
Suggestions ?

Update:
Issue is still occuring, after resetting wireless router.
Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

Garmin ANT+ agent app no longer works after upgrading to Yosemite

Hi,
I have ANT Agent for my Garmin watch (version 2.2.2 - latest) which worked perfectly in Mavericks but no longer works in Yosemite.
Can anyone help?

ewaller wrote:
Hello,
Welcome to the forums. Your post is fine in every way. Introduction, problem description, what you have done -- perfect. The package you reference is from the AUR which, as you know, is not in the main stream Arch distribution. These community contributions are essential Arch, but have their own area in the forum to differentiate them.
Moving this thread to AUR issues...
As it turns out. This isn't a bug in AUR/easystroke. It is a bug in the latest xserver 1.10.902 (found in the "extra" repo) Many applications are affected. Opera, chrome (if you are using the mouse gestures features for navigation) and it turns out that while i thought Maya wasn't affected, in reality, it is totally affected. most applications that use a mouse with right-clicks, middle clicks do not work properly.
it's an upstream bug, that affects all distributions using the latest Xorg. I am not filing a bug report, because as i understand it, this bug has already been reported upstream by Ubuntu-devs (on launchpad).
that latest update for Xserver, should have been tested better, before being an update available through pacman.
On my system, i do not use any testing repos, only core, extra, and community. I do this to avoid situations, just like this. lol.
I have work i need to get done today, but unfortunately, the only way that could happen is if i downgrade xserver (which i don't think is a smart idea). So, i guess i must wait for the next xserver update for arch. hopefully this happens in the next 24hours.
I suppose i will have to use OSX for now, until this is properly addressed and fixed.
anyway, i just wanted to point out that this bug has nothing to do (specifically) with Easystroke or AUR, that is just how i first noticed the bug. ( i just wanted to point that out, as you are a moderator ). This bug is in the main repos for Arch, and anyone updating today (or yesterday) will be affected, if they use applications where it's noticable.
jordan

Apps don't work after upgrading to iOS 5

After having my new iPad 2 to iTunes, answered one million questions, upgraded to iOS 5 and restored my content, MY PAYED FOR APPS DO NOT START, ANGRY BIRDS ALL VERSIONS, GARAGE BAND, SKYPE ETCETERA.
I am SOOOOOOO frustrated overklig tjis. I have PAYED FOR these APPS and have receipts, and tjej Seouls Word.
What has Apple done with them???? I want them back now!!!!!!!

I just did some poking around on other Apple forums here and found a recommendation for an app which actually does take the embedded lyrics from iTunes and display them on the iPad. It's been around since November, so I don't know why I never saw it before. It's called Lyrics View and it works well. The only quibbles I have with it are that it doesn't display the title, which the Music app used to do automatically, and when you switch out of the current song it takes you to Songs rather than Artists or Albums, so you have to change to Artists if you want to hear someone else.
It also displays the lyrics with the first lines all the way at the top of the screen, so they are sometimes hard to see behind the progress indicator, but you can make the indicator disappear with a click.
At least there's a workaround until Apple fixes this, assuming that they do.

Voice control no longer works after upgrade to iOS 4

Everything about iOS 4 has been great so far on my 3Gs, except that voice control no longer works. Holding the home button still brings up the voice control, and the "voice" confirms whatever action I say, but then instead of doing whatever it is supposed to, the phone just goes back to the home screen. Everything in voice control worked fine before I updated to iOS 4, so obviously it is a software issue. Has anyone else having the same issue?

I'm having the same problems. I have a 32GB iPhone 3GS which I upgraded to iOS 4.0 (previously running 3.1.3).
I've tried a full restore as well as changing the Voice Control language settings in General > International > Voice Control. I'm English and based in the UK and had my Voice Controls previously set to English (British). The weird thing is if I set my Voice Control to English (American) and then impersonate an American accent - then it works fine! Change it back and it's just the same - takes an age to finish recognising anything and then it's nowhere near what I said.
Hope that info helps out in diagnosing the problem.
J.

Apps don't work after upgrade ipad ios 5.1

I have updated my ipad to ios 5.1.
No apps work except native ones.
Is there a way to fix this ?
thanks

Try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

Back to my mac no longer works after upgrading to Lion

Back to my Mac no longer works after upgrading to Lion
After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

OK, so further investigation has addressed the BTMM issue on a remote machine.
With all machines running lion, I was having issues trying to log in to a standard user headless machine already running. In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login. Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions. This means you can admin the remote computer without bothering the remote user.
The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login. I applied a similar solution to a problem that was related to screen sharing I found on this board. What I believe to be the fix is to add the standard user to the screen sharing user list. Then screen share to the remote account using the standard user credentials.
So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access. Previously I only had admins. This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)

Similar Messages

Maybe you are looking for