Remote App with ATV died

I just updated my Ipod Gen 1 with 3.0, and updated remote...along with updating my ATV to 2.4. Now, my Apple TV will not see the ipod remote! It used to work fine before, I changed nothing on my network.
I use a TC on N for my macbooks and ATV. I use a G network for everything else. Ofcourse, the Ipod is attached to the G. This used to NOT be an issue. Has that changed? If so...bad apple...i'm not changing my whole network down to G to just use the remote app...

Hi,
Sorry if I'm stating the obvious - try re-syncing the Touch with iTunes - http://support.apple.com/kb/HT1947
Regards

Similar Messages

Remote app with Apple TV

I use the Remote app with both an iPad and iPhone to control my first gen Apple TV. This works fine except for one thing. When I select "Apple TV" as the library, using an iPhone I have access to all my library including Podcasts. When I run the same app on my Ipad, still selecting "Apple TV" as the library, no Podcasts come up on the iPad to select - the category is completely missing.
Has anyone else seen this issue ? Are they still there but hidden somewhere else ? Bear in mind I keep no content on the Apple TV - it is effectively just acting as a wireless device to get the signal to my TV.

Literally nothing happens. I click the done button and hear a beep. Over and over again.
On the phone, the passcode is still displayed.
Thank you for your help.

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

What?
You want to control iTunes on your computer using the Remote app on your iPad?
And you want to connect the iPad and computer through your Nokia?
No, this will not work.
Just create a network with your notebook.

Remote app and ATV (shortcut to STANDBY)

It would be nice if the Remote app had a direct "STANDBY" button you could hit no matter where you are in the menu structure and your ATV will enter into standby mode.
Unfortunately there's not. So you have to turn on your TV, step through the menus or you could of course "do it in the dark" (hitting MENU several times, scroll right, scroll all the way down and then hit ENTER (hoping that you are at the right menu).
Does anybody know of a shortcut to have your ATV enter standby mode?

That's true, provided that you use the Apple Remote that comes with ATV, but I'm using the Remote app on my Touch and there it doesn't work (holding the menu key and play/pause).
As to WHY? I just like have my gear turned off/standby, that's all. I haven't measured the power usage in standby/powered on mode.
An extra function in the "MORE" selection in the Remote app called "STANDBY" would do the trick.

Using Remote app with wired AppleTV

I can only control my AppleTV 2nd Gen with the iPad Remote app when the ATV is connected wirelessly. With a wired connection Remote no longer detects the ATV.
Similarly I can't see music or photo libraries on other Macs when I use a wired connection to the ATV. Does anyone know if this is the expected behaviour?
Incidentally the wired connection is over a Netgear HomePlug AV network.
Thanks!
H
Message was edited by: HD

I guess the problem will be with the Netgear connection not being a simple wired connection. I think that both devices appear to need to be on the same subnet, I have two wireless networks 192.168.2.x and another on 192.168.4.x with my router and apple tv on the 192.168.2.x network. With my iPad on the 192.168.2.x network everything is OK but if connected to the 192.168.4.x network then it cannot connect to the Apple tv so I believe it must be apple preventing access from another subnet.

Unable to pair Apple Remote App with iTunes

I am running a Toshiba Satellite L505D-S5965 with Windows Vista SP 2. My iTunes software is 8.2.1.6, and my iPhone 3GS is running OS 3.0.1 (7A400). Both the Satellite and iPhone are connected to the same WiFi local network, and yet the App "Remote" by Apple Software is unable to communicate with iTunes to allow the entry of the four digit code to establish control of the iTunes library. Shortly after purchasing the iPhone 3GS I purchased the Satellite, but in the couple of weeks between the purchases the Remote App worked fine on my Gateway running Windows XP SP2. I have been through Apple Telephone support twice, and have really run one of the technicians through the mill researching possible solutions. I have visited an Apple Store Genius, who could find no reason for the problem. The iPhone and Remote App worked perfectly well on the store's WiFi and Mac, but his iPhone also wouldn't work with my laptop. I have been through Kaspersky's technical support system to ensure that there isn't a firewall issue. They have assured me, after reviewing logs from my laptop, that this is not the case. I even went so far as to uninstall all my Kaspersky product, but the Apple Remote App still would not function properly. I have updated the router's firmware, and checked that the laptop's wireless card is running the latest driver. At this point I can't think of anything else to try but would really appreciate any suggestions. Thanks, Steve

Monday 7th Jan.
Just to say that Apple did call me this am to discuss the problem on foot of a call I made last week.
In the meantime the remote worked with both a 2007 IMac and a 2009 laptop but not on the m-mini.
When I tried pairing this morning during the call by pressing Menu and next together it paired.
The change is very subtle, it just says paired in the advanced section of the security et sl section as referred before, with a fleeting 2 intersecting rings icon.
The big difference is that Front Row is gone....
The remote only works to a limited degree within some apps such as iTunes and iPhotos.
In theory it controls the volume in iTunes but as of now for me it doesnt....:( need to look more.
As to what the problem was:
It seems there is a set of keyboard combinations that can be used to force a reset the ID of the remote, the suggestion is MAYBE that by getting it to work on the iMac and laptop in some way reset the ID.
This stuff is WAY beyond my skill level:)
I did impress upon Apple the need to look at the issue in threads like this....
Message was edited by: qazxsw52

Iphone Remote App with Linksys having problems

Okay I have a Linksys Wirless Router, my Laptop and iphone connect to the linksys via wireless using WPA, the wireless works great, I get my iphone hooked to the wireless network .. check stocks, weather, google around.. all that works !
I use my Remote App on my iphone and sweet that works too ... connects to my library shows my playlist on itunes .. I can play rewind, skip - everything works .. for about 3 - 4 minutes ...:( I play the songs i want click on skip a couple and boom, within 3-4 minutes my entire wireless network is down !
my linksys goes into a frenzy ... If i leave the remote app alone .. my linksys would run just fine forever ... 3 - 4 minutes into using my iphone remote app and my wireless networks toast ... anyone here having the same issue ?
I have a airport express that I plan to use as my default wireless router (replacing my linksys) to see if apples own wirless router has this problem as well ..
I sure hope not ... will keep posted .. but let me know if anyone is experiencing the same problem and if there is a fix ...

Hi,
Since I upgraded the Remote software to version 1.3.3 (4) it seems that when I'm browsing the music Library of my Apple TV, I can click on any artist and or album. So far so good, but after selecting, the tracktitle is shown on top of the screen, but the track is not loaded and cannot be played.
If I unplug my Apple TV then it works again, but after browsing and changing tracks 1 or 2 times, the bug occurs again.
Martijn I've read your the post and tried to delete the songs/artists that have the word 'Edit' in it, re-synchronized the apple TV with my iTunes Library, but no luck for me.

Azure remote App with Azure SQL Backend

Hi, If I had an application which utilised a SQL backend could I host the front end in Azure remote app and the backend on an Azure SQL database or would I need to use IAAS to provide the backend?
Many thanks
James

Hi James,
If the application is designed to be compatible with Azure SQL Database then yes, you can use Azure RemoteApp for the frontend and Azure SQL Database for the backend. If the application is not compatible with Azure SQL Database then you would
need to use SQL Server running in an IaaS VM, or SQL Server running in an on-premises VM. The IaaS VM or SQL Database should be in the same Azure region as the RemoteApp collection in order to minimize latency.
For example, say you have an internally-developed application that uses SQL Server 2012 as its backend database. Before you would be able to use Azure SQL Database you would first need to migrate the database to Azure SQL Database and make any changes
necessary to the application and/or database for compatibility. The SQL Database Migration Wizard is helpful for this process.
-TP

How do I connect my iPod remote app with itunes?

I can't get my remote app to connect with my computer, I've tried everything that I could find in the help menu but I still can't get it to work.

I've had trouble with it before as well, so you are not alone. Be sure to try all of the steps listed in then Resolution section of the document because your iTunes settings may not be the problem. The issue for me ended up being a firewall setting:
Click on System Preferences
Click Security
Select the Firewall (tab)
Click the Advanced button (may require Administrator password)
Ensure that iTunes has "Allow incoming connections" selected and click OK
Try it after that and see if it works. If not then reboot your computer and router (and/or wireless access point) and try it again. Let me know if this fixes it.

Outlook 2010 as a remote app with Remote Exchnage

Hello All
I am running RDS Farm with Windows Server 2008 R2. I have 2 RDS servers connected to domain and so on.
I have managed to "publish" Internet Explorer as a remote app (For secure surfing) and it works perfectly.
Now I would like to publish Outlook 2010 as a remote app and getting this issue:
When I try to run the published outlook shortcut, it opens up the outlook profile initialize in order to get the exchange server settings which is ok. But when I try to type my exchange server parameters
it does not accept it and I get the attached screenshot error.
It seems like it does not "see" the Exchange server from the remote app.
On the other hand, if I log on to one of the rds servers with RDP (as remote desktop) and open up outlook, it accept the details and works fine. ( Basically I do not want to publish
a full remote desktop but only specific remote apps )
From some reason when I run the Outlook as a remote app it does not recognize the Exchange server and won't let me setup the profile.
Even if I type the ip address of my exchange I get the same error, so I assume it has nothing to do with DNS issue nor Firewall or Antivirus.(?)
In addition, Once I do manage to initialize the profile through the RDP and then run it from the remote app it works.
Obviously I cannot log on with 60 with remote desktop and initialize their profiles, I need to publish it and configure the profile from the remote app....
some more details :
1. Windows 2008 R2 Domain environment.
2. Exchnage server 2007 Std.
2. LAN is on a different segment from RDS Farm and Exchnage Server is on a difrenet Segment as well.
3. If any other details is needed please let me know.
Moreover, this post seem to be similar to my issue but I am not sure if it would solve my issue. (http://social.technet.microsoft.com/Forums/windowsserver/en-US/059a57ad-09e0-4b2d-9292-18532f7d0339/outlook-2010-server-is-unavailable-error-when-starting-remote-app?forum=winserverTS)
Thanks in advance!

Hi Gil,
Please make sure that we have enabled Outlook Anywhere and installed the trust certificate on our Remote Desktop.
More details in the following article:
How to Enable Outlook Anywhere
http://technet.microsoft.com/en-us/library/bb123889(v=exchg.80).aspx
Feel free to contact me if there is any problem.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Remote app with 2 phones

I want to be able to control my Apple TV with the Remote App on 2 separate phones. Can this be done?
1 phone has connected and works but the other one requires a code to be inputted into the Apple TV and there is no option on the Apple TV for me to put the code in!!

Is this an AppleTV 1?

Unpredictable Custom Remote Behavior with ATV v3.0.1

I discovered a problem with the new Apple TV (ATV) v3.0.1 software download. It seems that this download has a bug in it regarding the programming of remote TV contollers, such as the DirecTV remote that I had been using. AppleTV allows you to program any remote to control the ATV screens. I had previously programmed my DirecTV remote to control the ATV when set in the AV1 mode. It always worked fine. After the new ATV software was updated a few weeks ago, it mysteriously allowed the ATV to respond to DirecTV commands (when not in AV1 mode). Thus, random commands were being sent the the ATV causing random (unseen) migration through its menus. Eventually, a random movie was selected (unintentional, of course). This actually happened more than once. I have since re-progammed the ATV for the DirecTV remote and everything is back to normal. Anyone else experience this problem?

Unfortunately this is a symptom of any upgrade on any equipment. Upgrades can make older equipment incompatible entirely, require updates for other equipment or simply (as seems to be so in your case) require the device to be set up again or make settings adjustments.

Azure Remote App with MSDN Subscription

Hello ,
I have an MSDN Subscription with a monthly cap of 50 swiss francs. Reading the RemoteApp licensing details it says:
"Yes. For each App Collection there is minimum requirement of 20 users. If you have less than 20 users, you would still be billed for 20. "
Is this also valid for MSDN subcribers? Yesterday I deployed a RemoteApp Collection, as first I had only read about the per user pricing, so assumed this would work fine, but then the other day I rad the above statement about a minimum of 20 users. So first
I immediately deleted the collection (hope it wasn't too late) but then i wonder how can i test RemoteApp? My trial period has expired, but i would really like to conduct further testing and not really paying for it , at least not for a minimum of 20 users.
Alex
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or MVPs.
Twitter:
@alexverboon | Blog: Anything About IT

Hi,
Each service has a starting price per user that includes 40 hours of service per user. Thereafter, per hour charge is applied for each user hour up to a capped price per user. You will not pay for any additional usage beyond the capped price in a given month.
For more information, refer this link:
http://azure.microsoft.com/en-in/pricing/details/remoteapp/
If this doesn't answer your question, then I would request you to contact billing support, it's free, and it's the best choice for you, here is the link:
http://www.windowsazure.com/en-us/support/contact/
Hope this information helps.
Regards,
Azam Khan

Remote app with iOS 5.1 possible?

In The app store only iOS 7 for down load!!

There are rumors that apps for older versions of iOS will be available, but they are not available currently.

Remote App on iPad not working with ATV

The remote app on my iPad (1st gen) was working fine with ATV last week. I noticed when using ATV there was a message about updating the ATV to a new version. I skipped the update each time as I just wanted to watch the program. However, we recently had a power outage which caused the ATV to shut down and I'm assuming launched the update as I didn't see the update message last night. However, I'm not able to use my iPad remote app with ATV any longer. When the remote app launches it indicates that it connected and it sees both ATV's. Yet, there is no ability to control the ATV. My iPhone 4S does not have this problem; It still works perfectly. I also have an iPad 2 and 3 and will check that shortly. Does anyone know for sure if the recent updates caused iOS 5.0 users to loose functionality?
Thanks,
Jeff

Hello ElCidPhysics90,
The following article contains a number of steps that should be helpful in getting the Remote app working correctly again.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Cheers,
Allen

Remote App with ATV died

Similar Messages

Maybe you are looking for